1 / 2
PPQ M2 T4E Valve Opening Tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Opening Tool to maintain or replace the O-Ring in the PPQ M2 T4E Magazine.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 116
- Makes
- 0
- Views
- 667
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Opening Tool to maintain or replace the O-Rings in the PPQ M2 T4E Magazine.
You need two M2x16 screws and a PH2 bit (optional).
Just screw in the screws from the bottom until they stick out about 1mm.
The PH2 bit on the side should hold by itself, otherwise use a drop of glue.
When using the tool, be sure to apply even force, to avoid scratching the valve.
Inspired by the similar tool from Untangleart on Cults3D, however modeled from scratch.
https://cults3d.com/en/3d-model/various/umarex-t4e-mag-valve-tool-for-maintenance-and-repair