1,629 models
Logo free version is available here: Commercial version is available here: The new 1:64 scale container is now available here: About Sea Container v3.0 This is improved design of the stackable Sea Container at scale 1/43. It is compatible…
Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.
A Native American drone flute in F# tuned to A = 432hz I noticed there were only a few drone flute files available online and I wasn't quite happy with the quality of them so I took it upon myself to design one that I was happy with. It…
READ INSTRUCTIONS: I see a lot of the prints and you guys area printing it in the wrong orientation. It's much stronger if you print it with the Holder orientated how it would be when you use it. UPDATE: Added Glock 43x Needed a place to…
This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…
This is a scale model of a 4-post car lift for displaying different size diecast cars. This is an updated version of a previous model of mine but instead of using M3 fasteners to put it together, I made the tray and posts fit with a…
PackUp Labeled Nesting and Stackable Bins for Milwaukee Packout Organizer Models 48-22-8430 and 48-22-8435 A nesting divider bin system with customized labels for your Milwaukee Packout organizer. October 23rd 2025 Updates: Parametric…
I've included a blank label and “Rotary Tool”. Easy to add text in a slicer - I used BambuStudio. I used raised text and printed on the face with supports. You could also print the text flush for a cleaner surface and no supports needed.…
The height of the leg can be adjusted from 43 mm to 71 mm.
Introduction: This is a 3D printable scale model of URAL 4320 , a heavy duty off-road capable truck designed by URAL for military and civilian operations. The model is designed in 1:32 scale for FDM 3D printing, which offers clean lines,…
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
It works on OEM and S15 mags. I take no liability as this was just a fun project and should be a stepping stone for anyone that is considering a magwell.
This cool little pallet jack is perfect for any 1:43 scale diorama involving cargo to move ! it' available in 3 parts to print separately : The pallet (print upside down) The forks (Supports needed) The handle + wheels
Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites. Model adjusted for the USB-C board version, which does have slight variations of the connector…
EDIT: May 2025 These labels have worked pretty well for me but I'm kinda hamfisted and I've managed to break a couple of them so I decided to make a stronger, more rigid version. There's not much left of the original design at this point.…
This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…
Model Update: 3/18/23@2030 hrs Pacific. After printing one of these, i realized that I made the counterbores for the screw holes too small in diameter. The counterbores are now 5mm diameter and should clear all M2.5 socket head and button…
I am working on a better way to attach the wing. If it does not work, you might have to glue it on. Let me know if you have any questions or problems with the design.
This model is compatible with the lego system.
made a insert for the slim packout 43pcs 3/8 impact set with a 1/2 to 3/8 icon reducer also with 1/2, 3/8, & ¼ impact drives from milwaukee it is tight fitting and made so the sockets don't move around. edit: made a v2 version i have yet…
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
This is a chassis for 1/43 scale bodies like Carrera Go, SCX Compact or other bodies. With this chassis you can convert almost every 1/43 scale car to a RC car. The only things you need are two servo (steering and motor), some screws,…
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
This model is compatible with the lego system.
Clamp mounting pads for precise right angle assembly. Made for Action (brand) clamps, but this size will fit other similar ones. Internal dimensions are 30.5 x 43.5 x 2 mm. There are two sizes. The larger one for large parts has a height…
I needed a case for the CYD (Cheap Yellow Display) that was thin enough to use 180° USB adapters. The existing cases was too thick so I designed my own one. The case have a cutout for the RGB LED on the backside and “buttons” for the…
F1 Garage ( For 1/43 Model Cars)
This model is compatible with the lego system.
Simple little plug for the grip of the Glock 43x. Not much to it. Just follow the instructions. How Too. Print, in PETG, but pay attention to the way it sits on the print table in your slicers. You must help it. Look at photo. It should…
🧱Lego Duplo Brick 2x2#3437🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…
Added a Fillet on the face to ease the handle usage. I also simplified some of the surfaces created a Fusion 360 file and 3mf and strengthened the body of the clips. I use the Add Part > Text command with the “cut” Operation in…
This model is compatible with the lego system.
These pulleys are designed for chain drive roller blinds. The original pulleys supplied with the blinds often skip steps, are noisy and do not support larger and heavier blinds. Use the pulley corresponding the size and weight of the…
Collection of washers including : M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24. For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
Customized version of http://www.thingiverse.com/thing:189264 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=189264 Print instructions Category: Containers Instructions Using the following options:…
This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…
Toto je tisknutelná skříňová nástavba pro model Praga V3S od Deagostini v měřítku 1:43 nebo pro tento model: https://www.printables.com/model/541730-praga-v3s-143 Soubor STL uvolňuji pod licencí neumožňující prodej. Vytiskněte si ho doma…
This is airflow optimized SSD mount in the 3,5" Supermicro drive sleads. This is based the OEM MCP-220-00043-0N mount and works with 7mm thick SSD and 15mm (use the SAS version), let me know i you need a diffrent size. This is made to…
Case for CYD 2.4inch run Bruce firmware, my variant has only 1 type-c Big thanks dotStudio to his model!
Please print this model on the side… At 1:43 you won't see the VW logo but it should look like a GOLF and it has spinning wheels ! It looks nice at 0.2 in PLA with no supports. Fun fact: this car measured only 3.7 m in length and weighed…
This is a custom rim designed to fit the popoular LEGO 43.2x22 tyre size. I was kinda unhappy with the stock rims because they don't really look realistic, which is why I decided to print my own. I got the outer part of the rim from…
This model is compatible with the lego system.
Full enclosure for the ESP32-2432S028R (CYD). Gives you access to most of the ports on the device and has flex tabs to press the buttons on the underside. Hardware needed (4) - M3 x 5mm x 4mm heat-set inserts (4) - M3x6 socket head cap…
This model is compatible with the lego system.
Model Praga V3S v měřítku 1:43 k vytisknutí. Bez nástavby - možno použít skříňovou nástavbu https://www.printables.com/model/431863-skrin-na-praga-v3s-degostini-143 případně korbu z modelu Deagostini. Obsahuje kabinu typ M1, M2 a M6. Jako…
I posted these before on thingyverse, but I dont like that site, just too slow, so as I am moving to this, thought I would share the design here too.
This model is compatible with the lego system.
I designed this replacement gear to fix an old Philips D6340 cassette tape recorder, but in the process I've learned that this is a common issue also in some more famous products as Magnavox D8443 or Philips D8444. Probably also other…
DONATE: https://paypal.me/JuanCMedina21?locale.x=en\_US Use customs support (see picture for support placement) Recommend to print with 0.24 Layer height and lower speed for overhangs to avoid using supports. Printed with TPU 1999-2001…
After some time, my CAME TOP-432NA remote controllers started to fall apart. Since the electronics inside were fine I decided to 3d print a new housing for them. I made 2 versions because I had 2 versions of the controller mainly…
These are for the 48-22-8435 Small Parts Organizer Models, solid and separated, depending how large your build volume is: P-Mag inserts for 10 magazines P-Mag insert for (4) 10 & (8) 30 round mixed I can do this differently on request, I…
PANEL STORAGE SYSTEM TWO VERSIONS VERSION WITH HOLE AND WITHOUT WALL FIXING HOLE WITH THE BAMBU STUDIO YOU CAN ALSO GIVE IT GREATER DIMISSIONS WHILE STAYING ON SCALE CAR 1:43 VASE SMALL HOBBY COLLETION QUADRO PER HOBBY COLLEZIONISTI
Passionate about aviation and aircraft engineering, I couldn’t imagine not modeling the Airbus Beluga XL (A330-743L) — one of the most iconic cargo planes in the world, instantly recognizable with its unique “smiling” design. The model is…
My Logitech G433 was broken on both Pivot Points, but i can't find Spareparts for the G433 :-(. Here are my printable Spare Part's ;-) You need: print all four Parts (two Left, two Right). 8 M3x8 Screws 8 M3 Nuts T5 Torx Screwdriver small…
Ein steckbarer Kleiderbügel in 43cm Breite. Druckbar auch auf kleinen Druckern mit 200x200 mm Druckbett. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Rafts: No Supports: No Resolution: 0.2 mm Infill: 25 Filament: extrudr…
I generated the STLs that correspond to the different cases: Bottom : WIthout RJ12 port : CYD_Dial_JC2432W328C_bottom_without_RJ12.stl RJ12 on rounded side : CYD_Dial_JC2432W328C_bottom_RJ12_rounded_side.stl RJ12 on squared side :…
Print in PETG for complient flex of the F-mount print in BLACK to absorb any stray light. Have fun big hugs bye
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without support. The “Body” file…
Simple 1x1 size Gridfinity container to store 8x CR2032 and 3x CR2430 Batteries Printed with: 0.6mm Nozzle 0.30mm Layer height 15% Infill
If, like me, you wanted a CYD and accidentally bought the wrong board, ending up with an ESP32-2432S024 instead of an ESP32-2432S028R, and you’ve searched everywhere without finding a case for it, then you’re in luck. I designed this…
So for those that have been following me for while on youtube and TinyGS, here is another treat, I have been working on multiple versions of a modified QFH antenna to get the smallest size and while keeping decent performance. This file…
Indian Four nr 439 year 1939. Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
Milwaukee packout insert to hold 43pc socket set as well as m18 stubby 3/8 impact with 5.0 battery. Sockets are a tight fit to hold them in place in transport. left a spot for you to add your own text
Simple case for the ESP32-2432S028 Cheap Yellow Display (CYD). Held together with four m3x10 pan head screws. No supports but you'll have to clear the 3mm screw holes in the back plate. Note that I've already adjusted the alignment of the…
Wago is selling their mounting solution for these tiny wire connectors but they were out of stock when I wanted to buy them. On top of that I'm pretty sure all of you guys agree there is a lot more fun iterating such a small piece of…
This is a remix of the really nice case by @Dsk001 . The original can be found here Alien3D Deck This remix has changed the following: Changed to using inset M3x12 socket head screws Removed logo(s) (I needed a cleaner look) Cleaned up…
This is a 43mm spindle mount - based on AMB 1050 FME-1. (including an adapted NutTrap and Drill Guide) All is fitted for the MPCNC Primo 25mm version! ( https://www.prusaprinters.org/prints/37292-mostly-printed-cnc-primo-f-25mm-mpcnc )…
The headphone stand / charger is meant for a convenient charging and display when not in use. It is made to fit a magnetic detachable USB-C cable from aliexpress called Fonken. The fit is tight fresh from printing on my…
This mine is the predecessor of the soviet PFM-1 mine known as the butterfly mine. Originally from the United States. It was used primarily in the Vietnam War. It was discontinued in the 1970s. Its design and principle was subsequently…
this is the Hoonicorn a 1965 (maybe?) it is from ken blocks car stunt series gymkhana if you have seen it great if you haven't I highly recommend it if you like cars. this was one of his cars that he used probably his favorite.
I broke my sunglasses and I wanted to order a new frame, because the glasses itself had some diopter, but unfortanely mr.spex doesnt sell them anymore... So I tried my best and made a model. Its for use with the Polaroid PLD D343 807…
The source marked this model as adult content.
FULL INSTRUCTIONS: https://randotechnerd.com/clear-petg This is only the settings for a 0.6mm nozzle single tile. Use the .3mf for settings the stl is just a 20x20x4 cube (images here are of this size). Original video 22x22x6mm for the…
This model is compatible with the lego system.
This is a replacement stand for building bridges with Carrera Go! 1:43 slotcar race tracks. I build this new from scratch because all existing models (same in thingiverse) are out of tolerance or are too loose or the threads are too…
The bike stand is fitting for all popular gravel bike tires. I made it possible to print all parts on Prusa Mini. I glued the parts together with a Loctite plastic superglue. designed for 28 inches tire, works for smaller tires as well.…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Looking for MORE upgrades for your enclosure? Consider…
Stand for the NERDMINER ESP32-2432S028
A simple 5 pos jig for stainless tag 43mm*24 XCS xtool file for template.
Any 1:43 scale model will need to go to the garage for a mechanical revision, so this is the perfect tool ! This model is available in two parts to print separately : The main body with posts The arms (print 2 of them) Assembly is easy…
This is a remix of "Glock Armorer's Slide Back Plate" by Michael303, to fit a Glock 43 slide. I just changed the dimensions via simplify3d to fit my Glock 43 slide. Do not use this for live fire, use for maintenance and troubleshooting…
This is a 3D printed spiral support structure for the wires of a 435 MHz QFH antenna. The antenna provides a dome-shaped hemispherical pattern that is suitable for operation (transmit or receive) on various amateur radio orbiting…
This model is compatible with the lego system.
1/43 scale model of a hydraulic ramp. easy print, simply print it 2 times and press the lifting fork into the pillar in the desired hight. Print Settings Printer: Geeetech A10 Rafts: No Supports: No Filament: Enotepad PLA blue Category:…
You don't need to use any thread inserts because board fits exactly. But you can use it and hide screws inside. Material: Whatever you want Infill: 5% Supports: NO
This gear wheel fits perfectly to the chain with 3 mm balls for blinds. When first fitted to the engine shaft, the gear holds very firmly. I recommend that after the first time it is put on, you use a kitchen knife or spatula to pry it up…
Benchys are perfectly designed to travel on seas, but what about moving them on earth ? Now we have a solution, the benchy boat trailer ! Designed for the famous little boat, it perfectly fits behind any 1:43 scale car model. Model…
A drift barrier for RC drift cars designed to navigate sharper corners.
This model is compatible with the lego system.
You can achieve some amazingly colorful results on your top and bottom layers using Prusa Slicer's octagram spiral infill pattern & triple color coextrusion filaments! Check it out! You may be interested in some of my other vase designs !…
This is a screen mount for the BigTreeTech Pi TFT43 touch screen to be mounted on the Voron Switchwire or the Ender 3 conversions. This screen is powered directly from the Raspberry Pi ribbon cable and best of all its plug and play - no…
This model is compatible with the lego system.
The M433 Grenade in 2 different formats. A solid model and a container.Please feel free to rate and review.
Fixed for printing (original: https://printabrick.org/bricks/2431 ) Print instructions Category: Construction Toys
Easy printable case for a 40% keyboard. Design can be printed on Prusa Mini. The design allows for easy alignment with filament as guides when gluing. Keyboard: bm43a PCB aluminium plate Akko CS Ocean Blue tactile switches (budget…
Changelog: 20240407: Added top cover joint between the two containers to make the connection stronger 20240403: Added single trailer ship_container_trailer_short.stl (for just one container) printable in one piece (for assembly skip step…
This model is compatible with the lego system.
I added a "ring" so I can tie to something (Instead of drilling the handle)
