Search results: 4l

Sort order

Counting matching models…

P
PrintablesDynarun

Dyna Dry Box / Filament Box 4L

Deutsche Beschreibung: !!!UPDATE: Ich habe breitere Halter und Rollen (+2mm/+5mm/+10mm) für breitere Behälter zugefügt, so sind Spulen bis zu einer Breite von 75mm möglich !!! Dry Box für Spulen mit einem Durchmesser von 200mm und einer…

Downloads
5,474
Likes
1,699
Rating
4.77
P
PrintablesAl Mon

Weyland Yutani - UD4L Cheyenne (Aliens)

This is an updated version of my Aliens Dropship. This one is scaled to 300mm and fully printable. It is print verified. May 2022 Update Added a complete zip file. The import from Thingiverse left a lot of files out. Please download the…

Downloads
1,776
Likes
222
Rating
0
P
Printablesthall72

Lego Compatible (3705.dat) Technic Axle 4L

This model is compatible with the lego system.

Downloads
1,540
Likes
82
Rating
4.67
P
Printablesshadowandy

4L Cereal Filament Dry Box

One of the dread of 3D printing is wet filaments - excessive stringing, uneven surfaces, extrusion issues, etc. If you got a similar looking 4L airtight box around, you can print these items to turn it into a filament dry box. The roller…

Downloads
1,371
Likes
219
Rating
5
P
PrintablesJones

Sól: OpenDTU (ESP32 / NRF24L01+) case

I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…

Downloads
1,351
Likes
70
Rating
5
P
PrintablesINVESTEGATE

Creality SpacePi Space Pi X4 X4L Filament Spool Guide Fix - cliped

A simple but suitable filament spool guide for the Space Pi X4 and X4L filament dryer from Creality. This prevents the spool from jamming when it's almost used up. Because the spool is too light, it can cause the spool to skew. This can…

Downloads
1,086
Likes
174
Rating
5
P
Printablesthall72

Lego Compatible (30374.dat) Bar 4L Lightsaber Blade

This model is compatible with the lego system.

Downloads
1,039
Likes
64
Rating
5
P
Printablesthinbegin

LR44 to 4LR44 Battery Adapter

I was approached with a request to design a battery adapter that would let someone use 4 "LR44" batteries in place of the semi-available "4LR44" battery, because evidently the 4LR44 is hard to get in some places. I don't normally do…

Downloads
1,018
Likes
87
Rating
4.5
P
Printablesdr13st

Dyna Drybox / Filament Box 4L with Hygrometer Mount

This is a slight modification of a great Drybox made by Dynarun to add a hygrometer in the front. You could also use my universal drybox plug to make it airtight when not in use. Required Parts Print basis.stl from this project, and all…

Downloads
985
Likes
163
Rating
5
P
PrintablesSwoosh

Single Spool 4L Drybox

4L filament drybox Background The idea was to create a drybox with as few modifications to the food container as needed where the spool can be changed with ease. Idea and Inspiration This is a collection of things I've found to work well…

Downloads
875
Likes
150
Rating
4.11
P
PrintablesStephen

Creality Space Pi X4 and X4L Auto Rewinder Mod

This project is meant to replace the buffer unit for the mmu3 by rewinding filament instead. The printed parts for this are as follows(I printed all the parts in PETG, no supports needed): Amount to Print File Name Comments 4 All Bracket…

Downloads
791
Likes
225
Rating
4.42
P
PrintablesINVESTEGATE

Creality SpacePi Space Pi X4 X4L Heat Shield Deflector

A heat shield designed to stop hot air in the Creality Space Pi X4 and X4L from blowing directly onto the filament spools while drying. I found DJR Engineering 's heat shield on Makerworld . It was too flimsy for me, though. So I designed…

Downloads
720
Likes
154
Rating
5
P
Printablesdigoz

Single spool 4L drybox (fits Prusament 1Kg)

Check Swoosh's print for the full details. For 4L dryboxes: Chef's Path or GoMaihe (they are equivalent).

Downloads
475
Likes
66
Rating
4.5
P
Printablesfoorschtbar

Case for openDTU Ahoy Breakout Board (ESP32 and NRF24L01)

A case for openDTU Breakout Board (PCB) with a ESP32 (38 Pin) and a NRF24L01+PA+LNA radio module. The Gerber files for the openDTU Breakout Board you could find on my GitHub page . Print instructions Parts 1x openDTU Breakout Board 1x…

Downloads
457
Likes
22
Rating
5
P
Printablesandruala

ESP32 nrf24l01+pa+lna bluetooth jammer BLE

I've built a case for my pcb that holds 1 esp32 and 2 nrf24l01+pa+lna I've attached photos so the exact placement of the esp32 and 2 nrf chips can be seen. The case also have 2 holes to store the antennas safely. The case have a small…

Downloads
428
Likes
38
Rating
3
P
Printablesclaytononeill

Cereal Box 4L Silica Gel Holder

This is a silica gel holder that's intended to be mounted at the top of the 4L style cereal box container that's common for filament storage. I use the Wildone brand boxes , but they're sold under several names. This holder will hold…

Downloads
421
Likes
98
Rating
5
P
Printablesrf1989

Filament Drybox for Wildone Food Storage Container 4L

I wanted more dryboxes for my regular rotation of colors and the Rubbermaid containers are really hard to find and quite expensive now. I found some great containers on Amazon and designed a platform in Tinkercad to hold a TUSH roller…

Downloads
317
Likes
63
Rating
4.17
P
PrintablesRamzes

Lego 30374 Bar 4L (Lightsaber Blade / Wand)

Alternate item number 28697 is used for transparent colors, has no air bubbles, and has been found in clear and frosted versions.

Downloads
266
Likes
9
Rating
0
P
PrintablesAhmed Mohiuddin

nRF24L01 Mockup

This is a mockup of the nRF24L01 Radio Module.

Downloads
252
Likes
8
Rating
0
P
Printablesthall72

Lego Compatible (10172.dat) Minifig Trophy Cup 2.4L

This model is compatible with the lego system.

Downloads
248
Likes
31
Rating
0
P
PrintablesGyu.Lee

four leaf clover, 4leaf , crocs

four leaf clover croc charm Category: Fashion

Downloads
247
Likes
46
Rating
4.5
P
Printablesshoogen

PTFE tube passthrough for 4L Dry Box

Lid for the 4L drybox. Avoiding to drill through the original lid. Printed with 0.15 mm layer height.

Downloads
241
Likes
43
Rating
5
P
PrintablesThom Mckirdy

DeWalt airlock adapter, DCV584L Vacuum and others

Reacently bought a second hand DeWalt vacuum and it never came with adapter for the airlock end to use the built in attatchments so I knocked up this, Figure someone could be in need also. Printed on my stock Ender 3v2 works a treat!

Downloads
237
Likes
22
Rating
5
P
PrintablesHelmut Lord

nRF54L15 Helmet - Case for the Nordic Semiconductor nRF54L15-DK

A compact, 3D-printable case designed to snugly fit the nRF54L15 devkit.

Downloads
223
Likes
9
Rating
5
P
PrintablesSuperb Tech

RC Remote Controller 8 Channel using ESP32 and NRF24L01

8 channel RC Remote Controller with 2 joysticks, 2 switches, and 4 push buttons Communication via ESP-NOW protocol (compatible with any ESP32 receiver) Extended range mode using NRF24L01 module Built-in rechargeable battery with low…

Downloads
220
Likes
57
Rating
0
P
PrintablesKonrad Pluta

Filament Spool Roller with Hygrometer & Desiccant Holder (for 4L Storage Boxes)

Keep your filament dry, visible, and ready to print — all in one compact system! This custom-designed spool roller with integrated hygrometer and desiccant holder is built specifically for the popular 4L airtight food storage containers,…

Downloads
216
Likes
23
Rating
5
P
Printablesthall72

Lego Compatible (6120.dat) Minifig Ski 4L with Hinge

This model is compatible with the lego system.

Downloads
214
Likes
34
Rating
5
P
PrintablesJosé Pedro

Renault 4L - Classic French Utility Car Model

Capture the simple charm and practicality of French automotive history with this 3D printable STL model of the Renault 4L. This classic utility car model is perfect for automotive enthusiasts and fans of European retro vehicles, offering…

Downloads
207
Likes
23
Rating
0
P
PrintablesCRM Printworks

P4L Outer Banks Keychain, P4L Llavero Outer Banks

Keychain with the famous acronym P4L from the Outer Banks series Printer: Ender 3 V2 Layer: 0,16mm Filament: Triwee PLA Time: 55min Llavero con el famoso acrónimo P4L de la serie Outer Banks Impresora: Ender 3 V2 Capa: 0,16mm Filamento:…

Downloads
205
Likes
8
Rating
0
P

LEGO Renault 4L

LEGO Renault 4L

Downloads
199
Likes
20
Rating
0
P
PrintablesMaster Yoda

NRF24L01 M5Stack Case

This is a NRF24L01 case to use it with the M5Stack Plus 2. I did the case but the unit i bought sadly does not work propertly.

Downloads
192
Likes
36
Rating
5
P
PrintablesBobby junior

PTFE passthrough Dyna Dry Box / Filament Box 4L | Deckeleinsatz Dyna Dry Box 4L

I only changed the lid part. The insert is designed for the Dyna Dry Box 4L , allowing easy filament storage and PTFE passthrough without drilling. Available in both 1-hole and 2-hole versions, it supports PTFE connectors that screw into…

Downloads
184
Likes
22
Rating
5
P
Printablesberezovskyi

Vinyl Record Stand 3LP 4LP

I remixed the original model by 3D Logic (which is a remix of Wynn G's model) to make it compatible with thick boxes. My Daft Punk 10th Anniversary Edition 3LP failed to fit and thus I needed to add some depth to the holder

Downloads
183
Likes
28
Rating
5
P
PrintablesMeowsketeer

Caps/inserts for the lids of 4l cereal containers (filament storage & feeding filament), 'triangle' shaped type

I designed this cap/insert for the lids of those 4l cereal containers I'm using to store my filament. I didn't find any model which suits that special triangle-like shape of the opening, other common lids seem to have more round-shaped…

Downloads
180
Likes
35
Rating
0
P
PrintablesMario Dittrich

Dyna Dry Box / Filament Box 4L w. Sensor, Bearings max. Width

Dyna Dry Box / Filament Box 4L w. Sensor, Bearings max. Width because my spools has a rounded edge - doesnt fit.

Downloads
178
Likes
28
Rating
5
P
PrintablesNerdo Solutions

Rectangular Hygrometer Mod v2 for Single Spool 4l Drybox

Rectangular Hygrometer Mod for @swoosh's Single Spool Drybox Find the new improved v3 here It's for those like me who use rectangular hygrometers and want to attach the mount to the filament roller base. The Model is very minimal and…

Downloads
166
Likes
24
Rating
0
P
Printablesstewe

Skroam Cereal Container 4L - Dummy

This dummy is not optimized for 3D printing, as I tried to replicate the container with fusion 360 as accurate as possible, with my limited measuring tools (caliper gauge, ruler, protractor triangle). I used this model as a dummy when I…

Downloads
165
Likes
27
Rating
5
P
Printablescarp3-noctem

openDTU / Ahoy with ESP-32S and NRF24L01+ Housing

Pressfit Housing for openDTU / ahoyDTU Datalogger. Made this to the smallest factor that makes sense. Used following Components to build: ESP-32S (used one from this set) NRF24L01+ (used one from this set) 6EA of the smallest Jumper Cable…

Downloads
164
Likes
7
Rating
0
P
PrintablesDarthbarney

Ryobi Lithium Screwdriver 4v HP54L Skadis Mount

Mount your Ryobi Lithium Screwdriver 4v HP54L (and HP34LVN) on a Skadis pegboard, combined two models I found so it works with Skadis: Universal Skadis Mount https://www.printables.com/model/282336-skadis-universal-mount-big 4V Li-Ion…

Downloads
161
Likes
19
Rating
4.5
P
PrintablesDaru FPV

4l Filament-Dry-Box System Quick&Easy

4l DryBox-System Quick&Easy Align the drilling template with the narrow side on the first indentation of the box to get the right position of the holes (see picture). Use the back of the drilling template on the other side. Use a 3mm…

Downloads
158
Likes
50
Rating
0
P
PrintablesPeter Jordan

Hygrometer Insert for 4l Cereal Containers

Because I had problems with the original version of this good design (they fell out, maybe tolerances on the containers too), I took the idea and redesigned it from scratch, but added some sort of "springs" to it so it fits tighter. I…

Downloads
157
Likes
29
Rating
5
P
PrintablesB3D

Wildone 4L replacement cap for drybox

My first creation and upload, hopefully someone finds it useful. I found these Wildone cereal storage containers sets (4L version) on Amazon and I wanted to see if they would work as dry boxes. I did not want to drill through them so I…

Downloads
153
Likes
18
Rating
5
P
PrintablesFommas

M6 PTFE passthrough Dyna Dry Box / Filament Box 4L

I only changed the lid part. The insert is designed for the Dyna Dry Box 4L , allowing easy filament storage and PTFE passthrough without drilling. Now suitable for a coupling with M6 screwthread. must be fixed with a nut

Downloads
151
Likes
31
Rating
5
P
PrintablesAlex@APTO

Silica Gel holder for 4l cereal box with hygrometer (drybox) | Silikagelhalter für 4-Liter-Müslibox mit Hygrometer

(english below) Wer nach einer Drybox mit rechteckiger Hygrometer- und Thermometer-Anzeige universell verwendbar für Filamentrollen, kleinere Drucke, Filamentreste/-proben und anderem sucht, wird hier fündig. Bei meinem Modell handelt es…

Downloads
150
Likes
20
Rating
5
P
Printablesgarn3r

Desiccant Silica Gel Box 4L Yashe Cereal Container

Remix of @phistoeck and @MegaCadler's awesome designs Resized to fit the popular Yashe YH-308 Cereal 4L Cereal Containers: https://amzn.eu/d/9XGP1qx

Downloads
147
Likes
25
Rating
5
P
PrintablesBazzar701

Tiny Renault 4L - Mini Cars Series

Renault 4L, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…

Downloads
140
Likes
28
Rating
0
P
Printablestitrisol

Velbon QB-4LC Quick Release

Velbon QB-4LC remix - Quick Release fits the Videomate-400, CX-430, CX-440, DF-10ML, DF-40, T-3500, and V5000 tripods, and needs a 1/4"-20 camera screw. A quick release plate can be kept attached to the camera's base and allows the user…

Downloads
140
Likes
7
Rating
5
P
PrintablesHedo3D

Rotho Box EVO TOTAL 44l - lid clip

Additional lid clips for my Rotho Box EVO TOTAL 44l. I think the original clips do not close the box tightly. I want to store my filament in it. Update 17.03.2019 I did not trust the existing gasket and stuck an additional sealing tape…

Downloads
133
Likes
21
Rating
5
P
PrintablesTonyFox

4L Filament Dry Box (Moisture-proof bead storage container included)

Suitable for 4L dry box, with Hydrometer and Pneumatic holder. Moisture-proof bead storage container included.

Downloads
129
Likes
20
Rating
0
P
Printablesthall72
Downloads
127
Likes
29
Rating
0
P
Printablesseekerbot

Box / case / housing for Wemos D1 mini and NRF24L01+ (for Ahoy project - Hoymiles solar inverter communication)

Some people got together to hack the communication protocol of a popular micro inverter by hoymiles so that you can see the internal values and send them on via MQTT. You can find the conversation here (in German) and the code here . I…

Downloads
125
Likes
6
Rating
0
P
PrintablesLammesky

Keyring gyro 4leaf clover flower - more luck for Shamrock - St. Patrick's Day

printet this in two colours.. temp. change green and pink.. original design had only 3 leafs (Irish thing). i needed 4 leafs for good luck.. please press Like, before you print this.. Need money for filament, so if you can & will donate a…

Downloads
116
Likes
20
Rating
0
P
Printableslightofhonor

4L MINI-ITX SFF PC CASE - PICO PSU - HALF-HEIGHT GPU

1) Printable on regular 3D printers. Printable on an Ender 3. 2) Have as much as possible 3D printed. Other than case screws and a power button you shouldn't need any other pieces! 3) Print with zero supports. Hate removing them, so…

Downloads
116
Likes
32
Rating
0
P
PrintablesMarmott

Webcam cover 4logi

Simple sliding cover for for logi webcam. The new comeras do not have the cover, this is a simple, sliding solution. On the back, towards the lens, I applied e rectangle of paper tape, so not to scratch the camera lens.

Downloads
116
Likes
16
Rating
4.6
P
PrintablesMrBlue

Hoymiles DTU für D1Mini + NRF24L01+

Ein kleines Gehäuse, passend für D1mini V2 (muss mit Heißkleber fixiert werden) und D1mini V3 (Kann mit 2x2mm Schrauben verschraubt werden). Zusätzlich kann man das NRF24L01+ Modul mit Heißkleber auf dem Block an der Seite fixieren.

Downloads
112
Likes
9
Rating
0
P
PrintablesCelizior

Clean 4L Cereal Box Drybox (No-Drill Design)

Edit : If you want to print this drybox, wait a few days, I'm finalizing an other version where silica gel don't go under the bottom part, and that support larger spool. I had a few problems with those from Overture that are slightly…

Downloads
106
Likes
21
Rating
5
P
PrintablesoXiVanisher

DIY JR Module Arduino and nrf24l01 for RC Taranis X9D

DIY JR Module Arduino and nrf24l01 for RC Taranis X9D. This remix was done, because the nrf24l01 format probably changed and mine did not fit. Category: R/C Vehicles

Downloads
106
Likes
5
Rating
0
P
PrintablesBobbyThunder

AA and AAA Battery Inserts for Really Useful Box 0.14L and 0.3L Containers

These are 2 quick prints meant for use with "Really Useful Box" 0.14L and 0.3L Containers to hold 20 AAA or 20 AA batteries. These are containers that I purchased for cheap at Staples. Each can hold 20 AAA or 20 AA batteries securely. I…

Downloads
106
Likes
36
Rating
0
P
PrintablesVroon

3,4l MultiBox filament drybox accesories set.

Additional accessory kit for the 3.4 litre "MultiBox" food container manufactured in Turkey (ean CODE 8694064003156). The kit makes it easy to store the filament in dry conditions, and to use it without taking it out of the box. The kit…

Downloads
106
Likes
32
Rating
5
P
PrintablesC4talyst

9.4L ITX chassis "LTX VENT-M"

a simple itx case,BAMBULAB P1P PRINTER or any printer with the build volume larger than 256*256mm*20mm RECOMMENDED. A preset 3mf file compatible with ORCASLICER INSTALLATION: GPU SPECS:250MM GPU OR SHORTER WITH LESS THAN 135MM WIDTH. CPU…

Downloads
105
Likes
25
Rating
0
P
PrintablesChodec

Bosch Move BHN24L handheld vacuum cleaner

STL and STEP files (made from original .stl files) included. Notes: I printed top parts with 5 perimeters (ie. arms printed without infill). I recommend to use raft for Top part because end of arms (or use the mouse ears at the end).

Downloads
105
Likes
8
Rating
5
P
PrintablesStephane

Heater knob replacement for Renault 4L

English This is a replacement knob for the Renault 4L. It is recommended to print it with PETG as the metal rod can get very hot during long travels. The 3MF project is preconfigured with my recommended settings (more perimeters and…

Downloads
104
Likes
3
Rating
0
P
PrintablesAtrica3D

NRF24L01 Flipper zero case

Following RJ019s method to build this module. Apparently i dont know left from right, so i accitentally built the module with the antenna on the “wrong” side, so to avoid me plugging it in wrong and blowing stuff up, i had to add the side…

Downloads
103
Likes
19
Rating
5
P
Printablesmrhedstrom

Filament Dry Box V4L

The Filament Dry Box V4L is a practical solution for keeping your 3D printing filament dry and ready to use. Built around a 4L inverted food storage container, it features a built-in humidity sensor, a silica gel desiccant container, and…

Downloads
102
Likes
15
Rating
5
P
PrintablesMW

OpenDTU Housing with 1,3 Zoll OLED, ESP32 NodeMCU and NRF24L01+

A minimalist housing design for OpenDTU, providing component visibility and accessibility for maintenance Additional components: 1,3 Zoll OLED display ESP32 NodeMCU NRF24L01+

Downloads
101
Likes
6
Rating
0
P
PrintablesOFreddy

Housing for TFT and ESP8266 with RF24L01

This is a Model for a specialzed housing for my project on github. https://github.com/OFreddy/wifi-tft-rf24L01 It is printed using Prusament PETG, needs no support with 0.2 mm layer height.

Downloads
100
Likes
12
Rating
0
P
Printables_KaszpiR_

Drybox Clip for Round Multibox 3.4L EAN 8694064003156

About Round Multibox 3.4L (EAN 8694064003156, produced in Turkey) with internal diameter of 22cm can be used as dry box for storing a spool of filament. It lacks seal and is made from elastic plastic so it needs tightening - that's why I…

Downloads
100
Likes
14
Rating
5
P
PrintablesKyle Horrocks

DeWalt airlock nozzle adaptor (DCV584L)

A replacement for the Dewalt airlock cleaning nozzles. I thought it was ridiculous that the official or off-brand part is £15 + so I redesigned my own. Top Layer - 2 Bottom Layer - 3 Walls - 3 Infill - 15% - 25%

Downloads
99
Likes
18
Rating
5
P
PrintablesJL°design

Dry Box from 4L cereal container - no supports

Desiccant bag is inside the spool - ensures good contact with support rollers and constant filament tension even if the spool is nearly empty. Used material: Filament consumption approx. 40g 4x ball bearings 625 2x M3x8 DIN912 1x…

Downloads
97
Likes
19
Rating
5
P
PrintablesScottmi

Glow Plug Guide Tool 2008 Ford F250 6.4L

Glow Plug Sleeve for changing glow plugs on a 2008 Ford Super Duty 6.4L diesel engine. Works great. I would not change a glow plug without one. It is a very simple cylinder with a flange, easily sketched from scratch. AA battery included…

Downloads
96
Likes
8
Rating
5
P
PrintablesNerdo Solutions

Rectangular Hygrometer Mod v3 for Single Spool 4l Drybox

Version 3 of my Rectangular Hygrometer Mod for @swoosh's Single Spool Drybox It's for those like me who use rectangular hygrometers and want to attach the mount to the filament roller base. The Model needs more filament than the previous…

Downloads
93
Likes
13
Rating
5
P
PrintablesNatataniel

Flat cap for 4lan9's XMax v3 Pro carry case

An alternative cap I made for 4lan9's carry case (or my remix with usb and screen openings) for carrying around the device with no mouthpiece. This is useful when you use something else than the default one or switch between them. For…

Downloads
91
Likes
16
Rating
1
P
PrintablesAlex Wilden

4LR44 K Battery Conversion

Convert a 4LR44 battery to a K Battery used in old Kodak Cameras.

Downloads
89
Likes
2
Rating
0
P
PrintablesDrHellbenders

Tasogen Hygrometer Insert for Praki 4L Container Lid - Slimfit & Removable

I wanted an insert for the Praki containers (used for filament storage) that consumed less material, didn't bind the hydrometer so much, and was easier to remove. This one takes a bit less than half the filament and also has a notch in…

Downloads
89
Likes
12
Rating
5
P
PrintablesChodec

Bosch Move BHN24L suction adapter

STEP model included, so everybody can modify internal diameter acc. to their accessories. Wall thickness is 1.5mm so also PLA could be used, walls remain flexible. My prototype was made from PLA. Print settings: 0,4 mm nozzle; 0,2mm layer…

Downloads
87
Likes
7
Rating
0
P
PrintablesCelizior

Clean 4L Cereal Box Drybox (No-Drill Design) v2

This is a new, improved version of my cereal box drybox. Still driven by my "no-drill" perfectionist approach, this design takes advantage of the container's natural shape—being wider at the top than the bottom. By using a…

Downloads
86
Likes
12
Rating
4.33
P
Printablestransammatt

4L80e Input Shaft Cover

Protect the inputs shaft of a 4L80e transmission from damage during storage.

Downloads
84
Likes
18
Rating
0
P
PrintablesCatwithDuckhat

Filament Drybox re/remix. designed for "Plastic House" 4L container, might fit more

remixed from @jmsweng's remix from @CAD_Dude's excellent original model. fixed some minor fit-ness and printability problems, reduced cost to print (30% less filament for the base) while maintaining most of the structural strength. It has…

Downloads
82
Likes
9
Rating
5
P
PrintablesJiltedGeek

Zero clearance insert for Ryobi EMS254L Mitre saw

Printed it in PETG with 80% infill, because the zero clearance slit you saw into it yourself. No supports needed.

Downloads
80
Likes
12
Rating
0
P
PrintablesMaking Changes

Ford F-150 (2009-2014) Upper Dash Mat/Tray 9L34-15044L06-A B

This is a replacement part for the upper dash mat in a Ford F-150 year 2009-2014. Part 9L34-15044L06-A B Seems the original deteriorates in the sun and the OEM part disintegrated during a simple vacuuming. Replacements are available but…

Downloads
79
Likes
24
Rating
0
P
Printablesexplorentinker

TB6612FNG Motor Driver and NRF24L01 Container

This is a combined container for both TB6612FNG and NRF24L01 for a more compact setup for the custom remote control receiver for RC. There are three (3) files in this 1) one with bottom opening for motor driver and normal NRF24L01 version…

Downloads
79
Likes
0
Rating
0
P
PrintablesJSMAKERS

1X4L pwm fan controller

I used a 2.75 mm thread screws to secure the cover.

Downloads
79
Likes
9
Rating
0
P
PrintablesRepro-Auto

Reniflard d'huile Renault 4L

Reniflard d'huile renforcé pour Renault 4L avec carburateur Zenith 28IF. Ce design a été validé lors de l'édition 2023 du 4L Trophy avec un montage sur 4 véhicules différents sans casse. Cette pièce est à imprimer de préférence en résine…

Downloads
78
Likes
3
Rating
0
P
PrintablesArucious

Fujifilm X100VI Gridfinity Shadowbox 4Lx2Wx6H

Fujifilm x100vi shadowbox 4Lx2Wx6H Space is optimized so two batteries can also be included Model sits snug, use the eyelets to pull it out if it is too snug, it does not wiggle much. Model stops below the eyelets so you can leave a strap…

Downloads
77
Likes
4
Rating
0
P
PrintablesPulsar Nova

Heat Insert Press (Worx WX744LM & Dremel Workstation 220)

The clamp is designed to hold the soldering iron with comfort sleeve put on. What Should I Buy? Screws M3 x 12mm - Cylindrical Hex Head (Hex Socket Cap Head) - 2pcs Heat Threaded Insert M3 4-5mm OD 4mm - 2pcs Updated Bambu Studio Model…

Downloads
77
Likes
8
Rating
0
P
PrintablesBurt0n

Filament Box 4l with PTFE slides

Required for the spool holder: 2/4mm teflon tube Required for the guide: M10 Male Straight Pneumatic PTFE Tube 15mm drill or a step drill Required for the hygrometer: Hygrometer 2x M2,5 x 5 screw 2x M2,5 nuts

Downloads
76
Likes
9
Rating
0
P
Printablescarbo
Downloads
75
Likes
3
Rating
0
P
PrintablesJasonZombie

Really Useful Box 4L Organizer

fits the 4L Really Useful box made for tabletop wargaming, specifically Warmachine. could be used for others, of course. the initials are removed from the file so you can add your own. Box: https://a.co/d/2wt5xzK

Downloads
74
Likes
14
Rating
0
P
PrintablesSalubra

NRF24L01 Flipper Zero case with led hole

Added a hole for led indication

Downloads
71
Likes
12
Rating
0
P
Printablesemissary

Roller for Single Spool 4L Drybox

This is a new wider (66mm) Roller for the Single Spool 4L Drybox to fit my filament roles. The angles are slanted to the sides like railway axles to keep the filament role self-centering.

Downloads
71
Likes
10
Rating
5
P
PrintablesKj_temmes

3racing Ex real Crawler 4link adjustment

To change wheelbase for 3racing ex real crawler. And not to have to make new links. Orginals are OK

Downloads
70
Likes
6
Rating
0
P
PrintablesVomDeich

Adaption parts for nuovva 4l cereal container w/o hexagon on lid

Since the shape of the Nuovva cereal container deviates from the original design, several modifications were necessary: Container geometry : Front side is narrower → front axle shortened by 10 mm. Axle holders : Introduced a 5 mm offset…

Downloads
68
Likes
15
Rating
4
P
Printablesexplorentinker

NRF24L01 Containers

This is set of NRF24L01 containers that can be used to hold for integration with remote controls. Options: no inserts - can be used with glue support for 2.5mm inner diameter inserts with respective distances between holes as 24mm (width)…

Downloads
68
Likes
6
Rating
0
P
PrintablesPhạm Tuấn

PC4-M6 For Dyna Dry Box / Filament Box 4L

PC4-M6 For Dyna Dry Box / Filament Box 4L

Downloads
68
Likes
12
Rating
0
P
PrintablesKytor

Bose Companion 2 Series II Stands for PVM-14L5

The Bose Companion 2 Series II are a great magnetically shielded speaker that can be had at a low price, making them a perfect companion for your PVM-14L5 monitor. Bob at RetroRGB has great information on the subject. These stands allow…

Downloads
67
Likes
11
Rating
0
P
PrintablesIbot_3D

4L Cereal Box 3D Scan

3D scan of a cereal box. This is not a perfect scan. Some areas have imperfections. But good enough for the most cad work

Downloads
66
Likes
6
Rating
0
P
PrintablesJon Do

Spare Battery Sleeve for Yaesu FT5DR, fits SBR-14Li Battery

Designed this sleeve for carrying around a spare battery for the Yaesu Ft5dr. Specifically the SBR-14Li battery. Its nothing fancy just practical and keeps the contacts from shorting inside a bag or pocket.

Downloads
66
Likes
6
Rating
0
P
PrintablesTim

Case openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+

Case for openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+ Find Board here: AllianceApps DTU Adapter PCB - ESP32 zu NRF24L01+ Printed: Printer: Prusa Mini+ Filament: Prusament PETG Nozzle: 0.6 Profile: Prusa predefined 0.15mm…

Downloads
66
Likes
8
Rating
0
P
Printablesbatteria_

Open DTU esp32-S3 NRF24L01+ case

Compact case for an esp32-s3 dev, NRF24L01+ with external antenna, no screw required. ESP and NRF24L01 must not have pin header soldered to fit inside the case, both usb-c ports are available.

Downloads
65
Likes
4
Rating
0
P
PrintablesJohnLama

Advanced Cereal Box 4L Silica Gel Holder

This is a silica gel holder that's intended to be mounted at the top of the 4L style cereal box container that's common for filament storage based on https://www.printables.com/model/326673-cereal-box-4l-silica-gel-holder by @…

Downloads
64
Likes
10
Rating
5