Silica Gel holder for 4l cereal box with hygrometer (drybox) | Silikagelhalter für 4-Liter-Müslibox mit Hygrometer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drybox mit rechteckigem Hygrometer für Müslibox | Drybox with rectangular hygrometer for cereal box
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 150
- Makes
- 2
- Views
- 1,425
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
(english below)
Wer nach einer Drybox mit rechteckiger Hygrometer- und Thermometer-Anzeige universell verwendbar für Filamentrollen, kleinere Drucke, Filamentreste/-proben und anderem sucht, wird hier fündig.
Bei meinem Modell handelt es sich um einen Remix der Modelle "Filament Hygrometer" von @PointNemo und der "Silica Gel holder for 4l cereal box" von @Daniel Schenk, die einzeln schon super, zusammen jedoch unschlagbar sind.
Die Box wird mit losem Silikagel oder Silikagelbeutelchen gefüllt und mit Senkschrauben geschlossen, anschließend wird das Hygrometer eingeklickt und die fertige Trocknungsbox einfach in die passende Müslibox mit leichtem Druck eingelegt. Die passenden Artikel habe ich unten verlinkt. Es können M3-Senkschrauben und Gewinde zum Kunststoffschweißen oder M4-Senkschrauben, für welche M4-Gewindelöcher im Unterteil mit einem Gewindebohrer gesetzt werden müssen, verwendet werden. Ich habe bereits mehrere dieser Boxen gedruckt und verwende dabei meistens M4-Schrauben.
Vorteilhaft bei dieser Lösung ist, dass selbst bei gestapelten Müsliboxen die Anzeige gut ablesbar ist und die Müsliboxen selbst nicht zerschnitten oder gebohrt werden müssen, wodurch sie später auch wieder für andere Zwecke genutzt werden können. Durch die große Menge an Silikagel sind sie zudem sehr wartungsarm.
Gedruckt werden kann die Drybox aus beliebigen festen Filamenten, wie PETG, ASA oder ABS.
Und nun viel Spaß beim Drucken und Schrauben.
If you are looking for a dry box with a hygrometer and thermometer display that can be used universally for filament rolls, smaller prints, and other items, you have come to the right place.
My model is a remix of the “Filament Hygrometer” model by @PointNemo and the "Silica Gel holder for 4l cereal box” by @Daniel Schenk, which are great on their own but unbeatable together.
The box is filled with loose silica gel or silica gel bags and closed with countersunk screws. Then the hygrometer is clicked into place and the finished drying box is simply inserted into the appropriate cereal box with light pressure. I have linked the appropriate items below. You can use M3 countersunk screws and threads for plastic welding or M4 countersunk screws, for which M4 threaded holes must be made in the bottom part with a tap.
The advantage of this solution is that even when cereal boxes are stacked, the display is easy to read and the cereal boxes themselves do not need to be cut or drilled, meaning they can be reused for other purposes later on. Due to the large amount of silica gel, they are also very low-maintenance.
The dry box can be printed from any solid filaments, such as PETG, ASA, or ABS.
And now have fun printing and screwing.
Links:
--> used hygrometer | verwendetes Hygrometer:
Standard hygrometer, rectangular, 48 mm x 28.6 mm x 15.2 mm | Standard-Hygrometer rechteckig, 48mm x 28.6mm x 15.2mm
https://www.amazon.de/dp/B07XG2PTH8?ref=fed_asin_title
--> used cereal boxes | verwendete Müsliboxen:
Vtopmart 4L Vorratsdosen Set, 4er Luftdicht Lebensmittelbehälter, Behälter mit Deckel für Müsli und Cornflakes, BPA-frei, Mit Schreibstift und Etikett : Amazon.de: Küche, Haushalt & Wohnen