Search results: 5ml

Sort order

244 models

P
PrintablesPincoyo

Measuring Spoon 5ml / Mesure 5 ml

This small 5 ml measure can be easily stored in the product container. It is easily printed in PLA or PETG. No support required. Please, like my 3D model and/or download it, a small gesture that will perhaps earn me a few Prusameters.…

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant

Downloads
310
Likes
26
Rating
5
P
PrintablesSpotmatic

Minox 35ML & GL 30mm filter adapter

Minox 35ML & GL 30mm filter adapter. This adapter replaces my old adapter: https://www.printables.com/model/173716-30-mm-filter_screw-to-push-on-adapter-for-minox-35 IMO, this one has a much better fit and also shows the distance scale.…

Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
118
Likes
10
Rating
5
P
PrintablesBurns3D

15mL Conical tube adapter for Sony Cell Sorter

A tube adapter for the Sony FX500 Cell sorter. Should also fit the MA900 and SH800. Made when some of the adapters when some of them when missing. Printed on standard PLA settings for the MK3s+ printer, no supports. Print each part on the…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
2
Rating
0
P
PrintablesBones

Can Dispenser (375ml/Aus size)

This is just an alteration of an existing can dispenser, in order to make it fit the standard 375ml Coca-Cola can in AUS. I also adjusted the size and length of the ramps to give the can enough clearance to fit under the top shelf. Update…

Downloads
2,011
Likes
746
Rating
2.75
P
PrintablesLiebherk

5g (7.5ml) scoop for creatine

Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = 7.5 unit_volume_1…

Downloads
1,416
Likes
24
Rating
5
P
PrintablesKieran E

Bike Beer Clip for 12oz, 355ml, and 330ml Cans

Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…

Downloads
919
Likes
106
Rating
4.7
P
PrintablesitsBoyinSpace

Twist Can Cup (355ml)

No Supports Needed print at .16mm layer height 10% infill 40mms print speed for best results tight tolerance's (expert print)\ No Selling added handle version (drink wont line up with handle without repositioning) -if you'd like to sell…

Downloads
847
Likes
126
Rating
5
P
PrintablesMisterMaker

Tablespoon cup (15mL)

I needed this one, the others I found on Thingverse and here, where a bit crap. It has a description on the inside. I made it so it prints without supports. It is also correct up to 1%. (Although I didn't account for the letters) It is 1…

Downloads
586
Likes
36
Rating
5
P
PrintablesHydra

Drink dispenser for 375ml cans

This is just a quick remix of https://www.thingiverse.com/thing:4923778 to hopefully fit 375ml cans. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill: 15% Filament: esun PLA+ black…

Downloads
503
Likes
72
Rating
4.88
P
PrintablesMarlin
Downloads
492
Likes
22
Rating
0
P
PrintablesKopr

Scoop (Measuring cup) 5ml & 7.5ml

I am using a fertilizer that needs a mix of 10ml or 15ml of fertilizer and 10 liters of water. I do own a 5-liter watering can. Therefore I made my own version of 5ml and 7.5ml that can be used in this watering can or eventually in any…

Downloads
449
Likes
19
Rating
5

Shampoo travel bottle (100ml, 75ml, 50ml, 25ml)

This is a collection of travel bottles, with following variations: shampoo (100ml) conditioner (100ml) shower gel (100ml) blank (100ml) blank (75ml) blank (50ml) blank (25ml) You can choose a variation from the different plates in the…

Downloads
432
Likes
82
Rating
5
P
PrintablesMateusz Tokarz

Measuring Scoops Set | 10ml, 25ml, 50ml

BOM: Printed with ROSA3D Starter PLA Red Whether you need to measure out coffee, protein powder, laundry detergent, or pet food, this set of measuring scoops is the perfect household utility print. The set includes three common and highly…

Downloads
370
Likes
105
Rating
5
P
PrintablesXimple Printing

Stackable Falcon centrifuge tube holder 50ml+15ml

My space in our lab fridge is a mess – many times i had to move out all the tubes in order to get the only one that I was looking for. They were lying flat, stacking on top of each other. So I designed this tube holder. This helps me to…

Downloads
356
Likes
29
Rating
4.67
P
PrintablesDSpecter

15ml Falcon Tube Rack

Just a simple rack I made for my partner who was needing one as the lab had none! It can hold both 15ml Falcon Tubes as well as EDTA (blood sample) tubes. Using a completely stock Mini+ with Prusament PLA, no infill (meant to be light and…

Downloads
339
Likes
30
Rating
0
P
PrintablesRokapet

DoTerra bottle (15ml) holder

A holder tray for 17x DoTerra 15ml bottles.

Downloads
304
Likes
16
Rating
5
P
PrintablesZwom

Measurement Spoon Set (0.1ml to 5ml)

These spoons can be used for measuring small volumes e.g. in the kitchen. Values are: 0.1 ml 0.2 ml 0.5 ml 1.0 ml 2.0 ml 5.0 ml Note: The Spoons are not marked or labeled. It is advised to label them e.g. with a label maker. Notes: I used…

Downloads
254
Likes
13
Rating
0
P
PrintablesTheRealJocki

Messlöffel | Measure spoon 0,2-0,5ml

Zur Dosierung von Fischfutter, Dünger, etc.

Downloads
244
Likes
11
Rating
0
P
PrintablesMacGyver1138

Slim Can 355mL Koozie

I wanted a koozie that could fit the slim 355ml cans, but that would then allow them to fit into coolers for thicker cans. I couldn't find anything that quite worked when searching, so I created a new one that fit in testing perfectly…

Downloads
242
Likes
21
Rating
5
P
PrintablesQueeblo

Harder and Steenbeck 2024 5ml Cup Lid

A lid for the H&S 2024 model 5ml cup to stop paint drying, not sure what they were thinking on this one. Included 2 versions V2 is slightly smaller in diameter by .2mm if you find your fit is too tight. I stuck with V1 as it fits very…

Downloads
239
Likes
25
Rating
5
P
PrintablesMichi Kipsy

Messlöffel - Measuring Spoon - 45ml

Messlöffel - Measuring Spoon - 45ml

Downloads
231
Likes
7
Rating
4
P
PrintablesLuna

Eppendorf vial tube rack / stand for ice 1,5ml

I hate when my samples are getting lost in the sea of ice in my ice box. I modified https://www.thingiverse.com/thing:4732058 for more samples.

Downloads
229
Likes
24
Rating
5
P
PrintablesMrFlippant

12oz (355ml) Aluminium Can Cozy/Coozy/Koozie, Plain

Using this model as a template ( https://www.prusaprinters.org/prints/37626-12 ) I created a new, basic model, but with a solid form so that I could choose what kind of infill I wanted. The same effect as the original can be achieved with…

Downloads
211
Likes
18
Rating
5
P
PrintablesCecilsan

Syringe holder - 3ml/5ml/10ml/20ml

During medical emergencies you have to deal with multiple drugs in syringes. Those may fall out of your pocket if not properly secured. There is a holder for 20 ml, 10 ml, 5 ml and 3 ml syringes.

Downloads
209
Likes
15
Rating
0
P

Beverage Can Dispenser -- 355mL Slim Cans (Topo Chico, High Noon, Etc.)

Nested and keyed Beverage Can Dispenser for standard USA SLIM cans (12 oz. / 355 ml). I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it…

Downloads
203
Likes
39
Rating
5
P
PrintablesJeffrey Lee

Staircase tube rack for 15mL and 50mL conical Falcon tubes

Staircase tube rack. Rows have differing elevation for easy access to each tube 2x6 15mL conical Falcon tubes, 2x5 50mL conical Falcon tubes. Holds a total of 22 tubes. No supports needed. Base is mostly hollowed out to decrease amount of…

Downloads
197
Likes
22
Rating
0
P
Printableswxyzab

Beverage Can Dispenser 375ml (AU)

Remix of @mhparsons Beverage Can Dispenser to fit Australia 375ml cans. Comes with a common front section and a choice of 5 or 6 can back section.

Downloads
196
Likes
87
Rating
0
P
PrintablesLucas

Dishwasher Powder Scoop 15g/15ml

The original model links to a GitHub repo with a swift package. I adapted the code to generate a 15ml/15g scoop. For convenience, I uploaded it here in case anyone else needs a scoop in that size.

Downloads
184
Likes
19
Rating
5
P
Printablesprintndrive

2.5mL Kanister ca. 1:10 scale

The hole is sized for a standard M3 tread. I personally use it to store gearbox oil near/on my models.

Downloads
180
Likes
42
Rating
0
P
Printablesmadmaxx890

Vial Drawing Assist fits all 0.5ml to 30ml+ Insulin / GLP-1 / TRT / Peptides

What is it? Built to pair with my " Magnetic Injection Assistant ", this securely holds medication vials inline and at the correct depth while drawing your meds into a syringe. How to use: Add your vial to the Carrier (now is also a good…

Downloads
179
Likes
26
Rating
5
P
Printableswavexx

1.5ml magnetic separation rack

A magnetic separation rack for four 1.5ml vials, optimized for a pipetting volume of 200µl and greater. See the remixes for a 12x version with faster separation. This replaces quite well some comically-expensive separation racks that go…

Downloads
175
Likes
14
Rating
5

Tavern Themed Can Cooler 12oz (355mL)

Stop by the tavern before your adventure and enjoy a drink from this 12 oz can cooler. This mug is designed to be efficient to print with multicolor. The bands are horizontal and work well with flushing to infill providing almost zero…

Downloads
170
Likes
68
Rating
5
P
PrintablesMre

5ml syringe - vase mode w/ TPU plunger

This is a fully functional 5ml syringe with tpu plunger. shells printed in vase mode for speed and plunger only 7 mins. 0 leaks and 100% holds liquids without droplets, pretty amazing… enjoy

Downloads
165
Likes
30
Rating
4
P
PrintablesAndrei Indutnyi

Viking 585ml beer can holder

This Viking helmet beer can holder combines functional design with legendary Norse warrior aesthetics. Perfectly sized to securely hold standard 585ml beer cans, this 3D printable model transforms your beverage into a vessel worthy of…

Downloads
163
Likes
42
Rating
0
P
Printablesadmin

Side load bottle cage for 375mL can

Side loading bottle cage for 375 mL cans. Perfect for a mid-ride beer. Need a bottle cage in different size? Check out my parameterised version here! Category: Sport & Outdoors

Downloads
148
Likes
30
Rating
1
P
Printablesschutz

Norditropin FlexPro Pen (1.5mL) Travel Case

Travel case that holds a Novo Nordisk FlexPro pen along with sufficient needles and swabs to get through a week of injections with a spare. Print-in-place / no assembly required. Printed with a 0.4mm nozzle. I used 40% infill just to get…

Downloads
146
Likes
19
Rating
0
P
PrintablesCorey Baker

5ml Tip Box

I couldn't find a box for my large 5 ml tips from Diamed, so I made one. “Do not autoclave” is imprinted into both the body and the lid of the box so there is no confusion, this is a heat labile product not suitable for autoclave…

Downloads
142
Likes
16
Rating
4.67
P
Printablessjalife

0.15ml Stevia Tsp Equivalent Measuring Spoon - Angled

Customized version of http://www.thingiverse.com/thing:114369 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=114369 Instructions Using the following options: thickness = 1 gripDia = 2.5 gripAngle = 20.0…

Downloads
138
Likes
17
Rating
0
P
PrintablesMangoMan

Teaspoon with clip (5g/5ml)

Made for creatine to clip onto bag but can of course be used for other things. Is a 5ml spoon (5g of creatine)

Downloads
134
Likes
13
Rating
5
P
Printablesidiogenic

Yeti Colster adaptor for 355ml cans *updated!*

There are companies out their ROBBING you of 20ml of beer. Bastards! Anyway, this little widget props up a 355ml can to fit properly in your Yeti Colster/stubby holder. It then cleverly flips over, and tucks up into the dome in the bottom…

Downloads
128
Likes
6
Rating
5
P
PrintablesPork3D

Yeti 375ml Multi Adapter by Pork3D.com

This is a multi adapter to hold various sizes of glass bottles in your Yeti Colster Insulatied Can Cooler. Simply slip over the top of the glass bottle, it flexes to size and then rotate into place. I found it fits most long neck bottles,…

Downloads
123
Likes
18
Rating
0
P
Printableshiroken55555

Small size tablespoon 15ml Tbsp

Space-saving tablespoon fits inside your powder can. Normal tablespoon is too long because of the handle and it usually won't fit inside my chai powder or hot chocolate powder can. It's accurately 15ml.

Downloads
120
Likes
12
Rating
5
P
PrintablesLinLinArts

5ml/15ml Eppendorf/Falcon Tube Rack (print in place)

Rack for up to 10 Eppendorf Tubes or 5ml falcon tubes. For easy one-handed access to the lids. Printed at 0.2 mm layer height, 30% infill, No supports needed. Printed in ABS for ethanol resistance.

Downloads
119
Likes
12
Rating
0
P
PrintablesJosé Luis

Measuring 5ml Scoop

Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = 5 unit_volume_1 =…

Downloads
118
Likes
9
Rating
0
P
PrintablesMercurious

Hex 5ml Ink Vial Holder

Made this to organize my ink sample containers and keep them from rolling away. During printing there was some issue with trying to print both models at once with the filament not feeding correctly, but individual they print just fine.

Downloads
114
Likes
9
Rating
5
P
Printablessjalife

0.15ml Stevia Tsp Equivalent Measuring Spoon

Customized version of http://www.thingiverse.com/thing:114369 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=114369 Instructions Using the following options: gripAngle = 0.0 gripLen = 80.0 thickness = 1…

Downloads
113
Likes
10
Rating
5
P
PrintablesMateusz Tokarz

Simple 25ml Measuring Spoon | Large Kitchen Scoop

BOM: Printed with ROSA3D High Speed PLA Gray This is a larger version of my straightforward, functional measuring spoon designed to hold approximately 25ml. It's perfect for slightly larger tasks where a standard teaspoon isn't enough. It…

Downloads
112
Likes
16
Rating
0
P
PrintablesSpater

Multi-tubes rack for 50mL, 15mL and 1.5mL laboratory tubes

Made this simple rack for a colleague in the lab who needed a multi-size holder for an experiment. The rack can hold : 1x 50mL falcon tube + 2x 15mL falcon tubes and 6x 1.5mL eppendorf tubes I printed mine in PETG for its better chemical…

Downloads
111
Likes
18
Rating
0
P
PrintablesJedediah Tango

Owala Water Bottle Holder, Cup holder, 40oz 1185mL

The water bottle doesn't fit into a normal car cup holder so I made this.

Downloads
111
Likes
19
Rating
0
P
PrintablesHansisThings

TPU Cap & Protection for Geekvape Z Sub Ohm 2021 Tank 5.5ml

I printed them with TPU and with FUZZY SKIN to give them a nice grip. → Outside walls, thickness 0.5mm and point distance 0.7mm. For the tank cover I used Snug Supports. You also need to add a Modifier→Cylinder, 32x32x12mm, Position Z 10…

Downloads
110
Likes
12
Rating
0
P
Printablesdodasch

Bar Jigger 50ml + 25ml

a simple Bar Jigger with 50ml

Downloads
109
Likes
12
Rating
5
P

TPU Red Bull 355mL Can Lid/cover

I loved having can lid for my 250mL redbull cans, but I had a few 355's recently and needed a version for those aswell. I present... that version!!! This fits 355mL redbull cans, but might also fit monster or other branded drink cans -…

Downloads
109
Likes
14
Rating
0
P
PrintablesJan Štech

Long Protein Scoop 5ml

The supplied scoops for sports nutrition are always short, so I decided to make a longer one. Pre-prepared support easily removable.

Downloads
105
Likes
12
Rating
5
P
PrintablesKamil Domański

25ml washing powder spoon

A 25ml long-handle measuring spoon for dosing laundry detergent.

Downloads
104
Likes
9
Rating
4.75
P
PrintablesAeRop

DoTerra 15ml bottles holders

Holder for 9 and 18 oils.

Downloads
104
Likes
10
Rating
5
P
PrintablesNusNus

35ml detergent measuring cup

I needed a detergent cup to measure 35 ml so made this. The cup can fit about 60ml of liquid but I made a line at 35 so it is easy to see when there is enough detergent. The good thing with this cup is that it doesnt spill. No drops on…

Downloads
101
Likes
13
Rating
5
P
PrintablesAndy

Triple ampoule holder for 5ml glass ampoules

A simple, lightweight ampoule. Ampoule seat height 72mm, diameter 15mm

Downloads
100
Likes
15
Rating
0
P
Printableshon_bun

Protective cases for 5mL injection vials

Important: Print horizontally or the columns will snap when inserting the vial! These are thin protective covers or cases designed for 5mL glass estradiol valerate injection vials manufactured by American Regent and Xiromed. They are…

Downloads
100
Likes
24
Rating
0
P
PrintablesGabriel

Eppendorf tube holder 1,5mL

Eppendorf tube holder 9x1,5mL print in place. There are some small details next to the feet that make the print look better. Can be easily removed after printing , as if they were supports.

Downloads
100
Likes
4
Rating
0
P
Printablesmoyerek

15ml Tube Rack (Small - 8 x 6)

This simple tray was reversed engineered from existing 15ml test tube trays to support a request from a local testing company in need of more trays. Standard trays and specifically standard size openings for 15ml test tubes did not…

Downloads
96
Likes
10
Rating
0
P
PrintablesLuna

Eppendorf vial tube rack / stand for ice 0,5ml

I hate when my samples are getting lost in the sea of ice in my ice box. I got inspired by https://www.thingiverse.com/thing:4732058 and made my own version dedicated to 0,5 ml vials. Design of the plate with numbers and letters is…

Downloads
94
Likes
12
Rating
0
P
PrintablesThe Pekareks

5ml pipette tips box

A box for 5ml tips. Do not autoclave.

Downloads
87
Likes
17
Rating
0
P
PrintablesThorrak

Stackable 15ml Centrifuge Tube Holder

This is a 15ml centrifuge tube holder I designed for holding nutrient blends for making mead. It also works for anything that will fit in a centrifuge tube. It is designed to be stackable, with a small imprint on the bottom of the rack to…

Downloads
86
Likes
9
Rating
0
P
Printablessjalife

5ml Tsp Measuring Spoon 60mm Handle

Customized version of http://www.thingiverse.com/thing:114369 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=114369 Instructions Using the following options: gripAngle = 30.0 gripLen = 60.0 thickness = 2…

Downloads
83
Likes
5
Rating
5
P
PrintablesYakudami

Skadis Honeycomb Paint Bottle Holders - 32ml and 35ml bottles

Space efficient bottle holders for 32ml and 35ml bottles for Ikea Skadis board

Downloads
81
Likes
10
Rating
0
P
Printablesboehml

Skadis 35ml Bottle Holder

Bottle holder for skadis pegboard. Holds 35ml bottles, like AK Interactive washes. Uses the hooks provided.

Downloads
81
Likes
11
Rating
0
P
PrintablesRokapet

DoTerra bottle (5ml) holder

A holder tray for 20x DoTerra 5ml bottles.

Downloads
80
Likes
5
Rating
5
P
PrintablesKyrian

Bouchon pour tubes à centrifuger coniques de 15ml

Bonjour, Voici un bouchon de remplacement pour les tubes à centrifuger coniques de 15ml ( http://www.cloup.fr/type.php?code=Tp2041&scat_id=147 ) Les bouchons d'origine ne sont pas très solides. Le fond du bouchon est conique afin…

Downloads
80
Likes
2
Rating
0
P
PrintablesPeagler Science

1.5mL Microcentrifuge Tube Rack Vase

Based on my earlier design, the Microcentrifuge Tube Rack , this version is printed in vase mode, reducing by over half the filament (110g to 50g) and time (11.5hr to 4.5hr) required.

Downloads
78
Likes
8
Rating
0
P
PrintablesVolkaster

Flux Dispenser for 5ml syringe

I wanted more compact flux dispenser to carry in case with my portable iron, so designed a version for 5ml syringe. Also I didn't like syringe fixation in another dispensers so I designed twist lock functionality (for it to work properly…

Downloads
75
Likes
11
Rating
0
P
PrintablesPhilip

Red Bull Dosenhalter 355ml

In meinem Getränkehalter im Auto fallen die Dosen immer um. Dieser Halter verhindert das.

Downloads
74
Likes
6
Rating
0
P
PrintablesRemiRafael

Holder for 15ml centrifuge tubes

This design is a series of holders for 15ml centrifuge tubes. The holders can hold 1,2,3,4 or 6 tubes. There are two versions named "compact" and "stable". They differ by the size of the legs: "compact" has smaller legs while "stable" has…

Downloads
74
Likes
13
Rating
0
P
PrintablesFranks3y

Yeti Coozie Lid to suit 375ml Bottles

Remix of Mupshots Yeti Lid, resized to suit Australian Coopers Ale 375ml Bottles.

Downloads
74
Likes
11
Rating
0
P
Printables5150Prints

Soda Can Dispenser (12 oz/355ml)

It holds 3 cans, and fits on the Prusa Mini. The overall usefulness for this is questionable, because you could just as easily put 3 cans on your desk without this device. Regardless, I still made it, because its more satisfying to hear…

Downloads
73
Likes
2
Rating
0
P
Printablesnvonniessen

5ml Syringe (STEP and F3D files)

Fusion files includes a motion link between the plunger and the syringe body. The total travel extends slightly beyond the 5ml mark allowing you to accomodate for slightly excess volumes (if designing a syringe pump apparatus).

Downloads
71
Likes
6
Rating
0
P
PrintablesMark Nakata

15ml Conical Tube 36-Rack

-PETG -no supports -any %infill 2023, MN

Downloads
70
Likes
9
Rating
0
P
PrintablesJimemm

Modular Syringe Holder ( 20ml / 10ml / 5ml )

Modular Syringe Holder for 20ml, 10ml, and 5ml Syringes This modular syringe holder is designed to accommodate 20ml, 10ml, and 5ml syringes, with each module being able to connect to another, either with or without magnets. Each module…

Downloads
67
Likes
6
Rating
0
P

35ml Vallejo Bottle Organizer

All credit goes to OysteinHuse for his great design. Printed @ 0.2 mm 10 % infill in PLA Customized version of https://www.thingiverse.com/thing:2426065 Printed @ 0.2 mm 10 % infill in PLA Remember to give my thing a "like" , its very…

Downloads
67
Likes
8
Rating
5

iTank2 Vaporesso 5ml

I bought recently the GEN 80S vape from Vaporesso. Very happy with the shopping but I got two problems: The drip get dirty when you put in the pocket and can leak some liquid so I wanted to create a tap to transport without worries. The…

Downloads
67
Likes
3
Rating
5
P
PrintablesTheAbian

washing powder Scoop 125ml

The laundry detergent scoop with a capacity of 125 ml sets the ultimate standard for efficient and precise dosing. Its generous capacity allows for optimal use of the detergent, while its ergonomic design ensures effortless handling. With…

Downloads
66
Likes
8
Rating
0
P
PrintablesSTxS

425ml Can storage dispenser "First in - First out" / Lebensmitteldosenlager

Material: 380g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P3a, P3b Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…

Downloads
65
Likes
18
Rating
0
P
Printablesflubb42

DoTerra bottle (15ml) holder

A holder tray for 11x DoTerra 15ml bottles. I sliced the holder of Rokapet to fit my a1 mini printer. with a printbed of 18x18x18cm

Downloads
64
Likes
4
Rating
0

Star Wars Grogu x Pint Holder for Ben & Jerry's Icecream 465ml

Original models: Grogu : https://www.printables.com/model/1747927-grogu-contemplation-statue Icecream holder: https://www.printables.com/model/1226654-pint-holder-for-ben-jerrys-icecream I simply merged and enjoyed. Made for a colleague…

Downloads
64
Likes
16
Rating
0
P
PrintablesLuis Lacera

essential oil display, special for 15ML bottles

essential oil display, special for 15ML bottles, perfect for placing 5 ml bottles

Downloads
63
Likes
6
Rating
0
P
PrintablesPetr Janatka
Downloads
61
Likes
19
Rating
0
P
Printablesstrjan

Falcon tuberack 15ml in SBS format

The rack is compatible with pipetting robots like Opentrons OT-2. With the Opentrons systems, you can use the standard Falcon 6x15 mL Conical lab-ware definition. Still, lab-ware position calibration is advised. The tubes are kept firmly…

Downloads
59
Likes
4
Rating
5
P
PrintablesWittiko

15ml falcon tube holder x6

I needed a holder for 6 15 ml falcon tubes. The one i was using was way to big, didn't fit two tubes next to each other with the caps attached and blocked the scales on the tubes. This fixes that and saves me a lot of bench space. This…

Downloads
58
Likes
3
Rating
0
P
PrintablesBolero629

5ml Ink Sample Vial Holder

Holds a 5ml plastic vial of ink to help prevent accidental tipping.

Downloads
56
Likes
5
Rating
4.5
P
PrintablesDanil Mikhaylov

5ml Syringe Holder

Works great at PETG (didnt try another one)

Downloads
55
Likes
5
Rating
5
P
PrintablesJpxfrd

Microcentrifuge Tube Rack 40-60-80 Wells for 1.5ml or 2ml tubes

3 sizes: 40 well, 60 well, and 80 well. Bottom of each well tapers to a point to help tubes sit upright. All sizes are available with and without handles. Print with 15% infill and supports if printing handles. Dimensions (mm): 80 well:…

Downloads
55
Likes
7
Rating
5
P

96 Well 1.5ml Microcentrifuge Tube Rack

This microcentrifuge tube rack offers a secure and organized solution for holding your samples during benchtop experiments or storage. Simply import the file into PrusaSlicer, use a standard PLA or PETG profile, and ensure your print…

Downloads
55
Likes
4
Rating
0
P
PrintablesBlablaszek

Stand for Vallejo 35ml bottles (ugly remix)

A rather ugly remix for 8 x 35ml Vallejo bottles.

Downloads
54
Likes
5
Rating
0
P
Printableswavexx

12x 1.5ml magnetic separation rack v3

Improved magnetic separation rack for 12x 1.5ml vials, optimized for a pipetting volume of 200µl and greater. This version holds 12x vials, with bigger magnets and shorter distance to the vial, making the separation faster. Requires 6x…

Downloads
52
Likes
5
Rating
0
P
PrintablesKrasnyy_Pivo

Rack for 50mL Falcon and 15mL tube

Just a rack, snap it in place

Downloads
51
Likes
2
Rating
5
P
PrintablesPegoku

Gridfinity 15ml tube holder

Gridfinity 15ml tube holder

Downloads
48
Likes
8
Rating
0
P
PrintablesKriegsjunkie

Waschmittellöffel, detergent scoop, 65mL

Build this little, very stable Scoop.

Downloads
47
Likes
4
Rating
0
P
Printablesnjmck

225mL Conical Centrifuge Tube Rack (2x, 4x, and 6x models)

A rack to hold multiple 225mL conical centrifuge tubes, such as those made by Corning (Product number 352075). No more struggling to carry them around in beakers to keep them upright. Holes are 62mm in diameter to suit tubes with an outer…

Downloads
46
Likes
8
Rating
0
P
PrintablesM1k103D

Reinforced Voss bottle cap for 375ml/12.7oz

My sis like to use this bottle in school, but the original polypropylene cap is fragile. The result is a thousand of unusable capless not broken bottles in our kitchen. But now i have a 3d printer and some basic CAD skills. She wanted…

Downloads
45
Likes
2
Rating
0