15mL Conical tube adapter for Sony Cell Sorter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.56 – €0.68 net (excluding VAT)
For file: Sony FX500 15mL Adapter_0.4n_0.2mm_PLA_MK4S_37m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.62 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 36.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
15mL Conical tube adapter for Sony Cell Sorter
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
A tube adapter for the Sony FX500 Cell sorter. Should also fit the MA900 and SH800. Made when some of the adapters when some of them when missing. Printed on standard PLA settings for the MK3s+ printer, no supports. Print each part on the flat side, then glue them together with superglue and use PLA filament in the two alignment holes on both sides of the large collar. I then put a piece of ferrous metal in the bottom piece, affixed with glue. This allows the piece to stay in the sample tray when the sorter spins the tube to mix.