5x5 Bed Level Calibration
Original size is 200x200mm, but can be resized to fit your bed. Works great with Jyers firmware to change individual points on the mesh.
- Downloads
- 751
- Likes
- 20
- Rating
- 4.5
470 models
Original size is 200x200mm, but can be resized to fit your bed. Works great with Jyers firmware to change individual points on the mesh.
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.3-0.6mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Bonsai display table (No. 08) round 75x75x59mm, best for mame bonsai. Feel free to scale up or down until you like the result and it suits your tree. A little support is necessary, even if the pot and feet are printed separately. However,…
This is a small bowl to keep small parts or use for sorting parts, printed without supports. This bowl feels like a general bought bowl this is because there is only a small part which has a infill most is solid PLA. We use it in the…
Použití například na vizitky Use for example on business cards
Sample organizer based on 0.5 ml Eppendorf vials ( Eppendorf™ DNA LoBind™ Tubes - https://www.fishersci.fi/shop/products/polypropylene-dna-lobind-polypropylene-microcentrifuge-tube/10686313 ). Ideal for 5x5x0.5 or 6x6x0.5 mm samples.…
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…
Setup for 8mm magnets to hold plate on metal surface. Magnets push in from the top. There is a small layer below the magnet. No glue needed to keep the magnet in place. Magnet can be pushed out by poking through the thin bottom layer.
Box - outer max dimension 204x170x52mm - inner max dimension 196x146x50mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill 30%…
18.08.23 Update: I have added a v2 with slightly optimized filament usage and 2 more screw holes (to make it easier to screw down in different locations if need be). My design for a lightweight, filament-efficient version of a 5x5…
Collection of screws (ISO 4017 / DIN 933) including : M5x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
Battletech stackable miniature storage tray 5x5, Stores 25mechs. Trays stack on each other It's stacking compatible with the 4x4 XL tray Fits all mechs if you want more storage density consider the 5x5 REG tray Doesn't stack with Small…
I tried to generate all combinations i could fit on my Bambu. Magnets have a tolerance of 6.20, which works perfectly when printing the bins with a 0.6mm nozzle. Scoop A Scoop is the rounded ramp inside the bins. The position of the scoop…
I loved these drawers, but I thought, What's the biggest I could make it and still fit on a 256x256x256 build plate? Turns out it is a 5x5 Gridfinity and 5 drawers high. Note the drawers are 5u Gridfinity bin tall. I've also included the…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
This is a 5x5 version of the Honeycomb Storage Wall
I got a request for a ammo box for Swedish Mauser. The spacing is 50pcs/82x12,60mm. The ammo looks very pointy from unlike the sketch, but I have followed the measurements that were given. Haven't printed it but i have moved the lid in…
Collection of screws (ISO 10642 / DIN 7991) including : M5x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight,…
Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…
Want to get even more accurate? Or see how accurate your 3x3 mesh is when printed in a 5x5 mesh? This is a 5x5 mesh you can use following the original instructions from the original model at the link below and its optimized to work with…
up to date version of my projects are always on thingiverse, sometimes i forget to update the other platforms! https://www.thingiverse.com/thing:6222183 Update: -V2Base and V2Lid with more clearance around the alignment features and…
This a 48 sample pack of approximately 5x5 cm climbing holds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors
This Cable Cahin was inspired by Marius Hornberger design Its redesign to fit my needs with endconnectors This is for my PrintNC machine.
I am so excited about this! I was so tired of my messy fridge and the random magnets to hold up the little photos I wanted on the fridge, so I came up with this simple design. Holds 4 - 6mm magnets. If you have different magnets you want…
Gridfinity 5x5 for Skadis It is a remix, but not sure where from
Remixed from this and the original to fit a 5x5 photo. Be warned the fitment is exact (no margin for shrink), so mine printed slightly smaller than 5" and I had to trim the picture. You might want to scale it up a percent or two for some…
Update May 8th 2023: Unfortunately I made a mistake and uploaded a wrong .stl file! The .gcode file is ok… @Herbi_16692 made me aware of this, thanks for that! New file is uploaded… I apologize for all wasted filament and print time! Are…
This a 48 sample pack of approximately 15x5 cm climbing holds with their molds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors
This is a remix of Perinski's design. https://makerworld.com/en/models/549604#profileId-467957 Changes I made are adding Gridfninty 5x5 Base. Pins may need a punch and hammer to lightly insert. No need for wires or screws. This can all be…
Depending on what you want to build this plastic one might replace metal original. Sides: 40mm x 40m x 40mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…
Mounting bracket 3 sides-40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 50min ca.: 4,4m Filament no Supports 50% Infill
I got a request for a 6,5x55 ammobox of the new model i make. I made 2 sizes for the shell 12,42mm and 12,60mm. So you can choose if you want a little tighter fit or not. I made a o-ring to fit the lid but it's made for 2mm o-ring string…
Didn't like any of the print in place Gridfinity baseplates as they didn't seem single material friendly. I modeled in single line supports to get a good blend of adherence and still being able to separate. Modeled a solid tower in each…
Dummy for guns which use the swiss 7.5x55 mm GP11 cartridge. (K11, K31, STGW 57, LMG 25, MG 51 …) Do not use for IG 1889.
A 5x5x5 rubik's cube puzzle. Turning is ok, but more sanding will help. The stickers for this puzzle are available here: https://speedcubeshop.com/collections/sticker-picker/products/5x5-sticker-picker-new?variant=32287155486833 Print…
[EN] Protective frame for rfid keychain 25mm x 51mm. [RU] Защитная рамка для RFID брелка 25мм х 51мм, например "тройка" или ключ от домофона ПИК Print Settings Printer: FDM Rafts: No Supports: No Resolution: .2 mm Filament: pla Notes:…
Depending on what you want to build this plastic one might replace metal original. Sides: 60mm x 60m x 60mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you like this little thing, you might also want to check these…
The original file didn't suit for my sockets, so I adjusted it. Now it's fitting like a charm. Big thanks to the creator if the original file for providing the files for editing.
Box with handle - outer max dimension 204x170x62mm - inner max dimension 196x146x50mm Video with disassembly: Used screws: M3x8 4x 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill…
A simple and elegant puzzle for a little brain-teasing. The part orientations are ready to print and you can choose one of three stand designs. Hard difficulty. Printing instructions: No supports required. Layer height: 0.2mm
Depending on what you want to build this plastic one might replace metal original. Sides: 50mm x 50m x 50mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you like this little thing, you might also want to check these…
Drawer to store screws or any other sort of small objects. Print suggestion: height: 0.2mm fill: 15% Attach the top using superglue
ENG: Chainmail :5x5, 10x10 and 20x20 mesh versions. With or without plate. No support, print plates downwards. FR: Cotte de mailles : versions 5x5, 10x10 et 20x20. Avec ou sans plaque. Sans support, plaques d'impression vers le bas.
Description (IMPORTANT - I linked the 3mf file that is set to pause before adding the top layers because it's the only way I know to expose the infill) If you are using a 220mm bed you will have to disable the prime tower for space. If…
3x5x5 Gridfinity insert that holds twenty eight 10ml vials, or anything else cylindrical that is smaller than 25mm This is used in a 3x5x9 Gridfinity box to hold 28 10mml vials. It has holes for magnets on the bottom. You can use it in a…
This requires a multi-material printer. Please refer to the included gcode and project files for a reference for how to print the checkerboard pattern. Minichess is a Chess variant invented by Martin Gardner in 1969. It uses a small 5x5…
Update: There is also a magnetic version of the switch tester now https://www.printables.com/model/943189-stackable-magnetic-5x5-mechanical-switch-tester The usual switch testers are normally just one plate, either way to big if you have…
Depending on what you want to build this plastic one might replace metal original. Sides: 40mm x 40m x 40mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…
6 round mag tested with over 300 rounds. 0 feed issues. 10 round mag feeds well in testing so far. (150 rounds tested) Printed with auto tree supports hotplate only. prusament PLA 0.16 layer hight 0.2 first layer 70% infill 4 walls spring…
A compact magnetic riser designed to hold thin materials flat on a laser cutter honeycomb bed. The block contains a 25×5mm magnet that securely attaches to the steel honeycomb surface, keeping the riser firmly in place during cutting or…
Box for ammo cal. 7.5x55 (SWISS), can hold 35 ammunition. Very useful for sport shooting 300m with Schmidt Rubin K31. For this Box you must add 8 parallel pins (ISO 2338) Ø5 h8x18 (if you can't find it, you can cut a bar of any matirial…
I designed this Sample Card in a Business Card Size. The Fusion360 model is customizable.
Ich wollte einen glatten Deckel für die Gridfinity Storage Box 5x5 von Pred. @Pred Vielen Dank für Deine tolle Box. Da ich mich mit keiner richtigen 3D Software auskenne, habe ich den Deckel in Tinkercad überarbeitet. Es ist alles gleich…
Simple container desing for storing small objects. Print instructions Print with default settins, 0.20mm, PLA. Tested on Original Prusa MINI with PLA Prusament
Made using the parametric Skadis file, all sizes 60x60 - 210x210, i.e. 1x1 - 5x5
A model cut and modified in a slicer, of this author's beautifully elegant and functional model: the model is extended to 50mm To maintain the rating, download the other components from the model author. I apologize to the author for the…
I modeled and printed some custom zero stop rings for my Vortex Strike Eagle 5-25x56. I figured I would post as I had seen some people asking about custom ones online when I was looking. I printed in PLA for now, but I am sure that it…
Depending on what you want to build this plastic one might replace metal original. Sides: 60mm x 60m x 60mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…
I got a request for a 6,5x55 ammobox of the new model i make. The spacing is 50pcs/81,20x12,60mm between the insert top and bottom. Please read the size before printing. I made a o-ring to fit the lid but it's made for 2mm o-ring string…
Battletech stackable half height miniature storage tray 5x5, Stores 25 vehicles. Trays stack on each other (two trays stacked equal the size of one regular tray) It's stacking compatible with the vehicle 4x4 tray, 5x5 REG tray, 4x4 XL…
Depending on what you want to build this plastic one might replace metal original. Sides: 50mm x 50m x 50mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…
Mounting bracket 40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 40min ca.: 3,1m Filament maybe supports, for me it worked without 50% Infill
While I found some gridfinity drawers, none would be completely to my liking. My criteria were Sturdy to hold screws and nuts Stackable for easy extension Use as little filament as possible for faster prints and less costs The drawers do…
the 125mm depth makes the the X1C or P1P fit on an Ikea shelf of 52 cm deep. use the standard setting of the original
5x5 interlocking full size Qwirkle grid
This is a Driver Hex Bit holder with good fit that holds 35 Bits
added a stopper to the back so box wouldn't go past the shelf.
Used as a template for leatherworking. Printed upright with PLA, 0.2 layer height which seemed to work nicely.
6.5X55mm Swedish stacking loading block. Category: Tool Holders & Boxes
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Prusa MK3s+: Material:PLA Layer 0.2mm Seam position: nearest Solid infill threshold area: 70mm2 Speed out perimeter: max 50mm/s No brim, no supports. You need to gently open the hinges.
Reloading tray for all calibers .223 → Suitable for 243 / 6,5x55 / 308 / 3006 / 9,3x62 etc Steps/stair design, for easier access to the brass casings. Print in desired filament, no support needed.
Tired of drawer handles breaking the front honeycombs during assembly? If so, this eliminates this issue by filling the front drawer side solid.
Bring a timeless aesthetic to your desk or wall with this beautifully ornate Victorian-style picture frame , featuring intricate scrollwork and a 127mm x 127mm (5"x5") square footprint with a circular photo window. Designed for…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
A simple and elegant puzzle for a little brain-teasing. The part orientations are ready to print and you can choose one of three stand designs. Hard difficulty. Printing instructions: No supports required. Layer height: 0.2mm
Just a small picture frame. Tested and verified only for use with pictures of my cat, but you can try other ones :)
Prototype remix of the Gridfinity Storage Box V1 by Pred, with an integrated, more robust hinge. The hinge leaves will also act as a base for standing the box vertically. I also removed the sweeps from around the circumference as I felt…
Extensions to be glued to the pieces of an MFJS Meilong 5x5 to turn it into a mirror cube.
Maske für die Hasselblad V-Serie, zu platzieren über der Sucherscheibe. Die Maske hat den Ausschnitt 35 x 56 mm, wenn man den Kleinbildfilm mit den Sprocketholes belichten will. Gedruckt in PLA mit 100 % Füllung damit die Maske halbwegs…
With 2 Slots for 55x55x1mm foil packaged meds, or paper with Meds/Contact info. Reverse slots are Indented.
Print this in whatever material you like. There will be some bridging, so make sure your printer is capable of it.
Fed up of having test tubes loose in a box? how about a Gridfinity solution, use this for holding all our clean test tubes ready for use with testing the fish tanks for various chemicals. Fits into a 3x4 Gridfinity slot, if there is…
This can be printed with a wide variety of settings. Just about any non-flexible material should work. I've typically used PLA with 4 walls, 10% infill, and a 0.6mm nozzle.
A thing to hold the Hoto Cordless Air Duster & Vacuum (a.k.a. Compressed Air Capsule). Bin size is 5x5x4.
I needed a drop in base plate for my xTool F1 Laser to hold a grid of 16mm dice in place. The slot is 16.5mm square, allowing for tap if you need it. Be sure to use alignment laser to get it perfectly centered.
Ikea Skadis/Skådis tape holder for 75x50mm inner diameter tape.
Here is a 5x5 Slide Puzzle, more numbers are clearly better. As usual, my models are made available for commercial use. I humbly request 10% of profits if sold, but I have no mechanism to enforce this desire, and for toys given away for…
You should use PLA because if you use PETG the firing Pin of your rifle could be damaged, if you dont use it in a rifle it doesnt matter.
A simple base adapter for older Warhammer The Old World, designed to have just enough clearance for models whether you want to glue them in or leave them swappable, this design uses 3mmx1.5mm magnets to keep your soldiers in ranks. This…
To organise your paint bottles, a Gridfinity storage solution for: Revell Aqua paint bottles - 34x34 mm Tamiya 10ml bottles - 36 mm diameter MrHobby 10 ml bottles - 36 mm diameter Vallejo bottles 35/60 ml - 36 mm diameter Microscale…
This is an end cap for a rectangular tube like you see in some desks. The tube in the picture where I made this for measures 22X47 mm inside and 25X50 mm outside. https://www.3dwp.nl
Organiser Box printet in PLA 0,2mm Speedprofile. No supports
5x5 cell holder for 26650 Lifepo4 or LIPO cells with busbar Category: Tool Holders & Boxes
Inspired by a Sol LeWitt piece at the Detroit Institute of Art. Category: Math Art
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…