Lego Compatible (63965.dat) Bar 6L with Thick Stop
This model is compatible with the lego system.
- Downloads
- 518
- Likes
- 35
- Rating
- 0
52 models
This model is compatible with the lego system.
This model is compatible with the lego system.
Water tank cap for W639 that is ideally printed in TPU. Inner most diameter is 74mm. That is the exact size of the original part. Print advise: The fit is a tad loose when using TPU. You might want to print at 98% size in the slicer. (As…
Shark fin cover for the roof antenna of your W639. Print using PETG, ABS or similar heat resitant material. Two verisons are supplied. 1. The regular one with thick walls ment for translucent filament and a recess to hold the Sika Flex…
I broke two Glass Shelf Support Piece on my Bosch gin81aef0 freezer, replacements are way too expensive for crappy plastic parts (part number 00639092), so I modeled replacement ones and they fit perfwectly.
My original tether broke after 13 years so i designed a new gas cap tether for Mercedes Vito W639 If you need help how to print this message me Print instructions Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
Heavily inspired by this design, though it is modeled from scratch: https://www.printables.com/model/494301-gridfinity-wiha-7pc-precision-screwdriver-tray-for I did this so that the sets would match nicely in my drawer :) This design…
This adapter fully replaces the ugly stock phone holder while using its original mounting bracket for very tight fit and hold. I like the Brodit MoveClip system, which i designed the screw placements of my dashboard adapter for. But you…
The part number of the w639 glove storage compartment is A6396800291 You can buy a replacement compartment for roughly 120€ from ali express sellers or 250€ by amazon sellers. But we are here for nifty DIY solutions, right? This Repair…
I designed adapters for replacing original speakers to 165mm speakers. They should fit great to rear. If you want to put them in front doors, you have to cut important part of plastic from the original door card. I uploaded 2 versions.…
Replacement cap for the w639 front windshield wiper nut Print tested using TPU 95A .
Update February 2, 2024 I've heard that some people had trouble with hole size. I increased the holes for the 2.5 and 3 mm drivers. Thanks to everyone for the feedback. Original Post: I saw this Wiha screwdriver tool holder.…
Newly created adapter to precisely fit the stock W639 speaker mount screw holes. Its a recreation of one i bought from aliexpress which broke on first try mounting it due to flimsy and hollow design. Replaces: LAUTSPRECHER…
Kaypart Alloy Steel Bushing for Mercedes Vito Viano 639 Manual Gearbox Repair
This model is compatible with the lego system.
This model is compatible with the lego system.
Works like a charm since then. Pretty easy to print as well, just print the buttons upside down.
Nach 15 Jahren waren alle Weichmacher aus dem Deckel für den Wischwasserbehälter meines Vito der Baureihe W639 weg und das Teil ist zerbröselt. Hier wäre - falls es jemand braucht - Ersatz dafür. Falls jemand das Dinges verändern…
Speaker adapter 165mm (6.5) inner diameter 144.5mm height 25mm
Stand for ROG Ally/X that fits the UGREEN CM639 hub
Replacment for Electrical Box Clip A6395450073. In case one of yours broke or went missing. Print in PETG or ABS to ensure temperature resistance.
My W639 Vito's battery cabin door latch was missing. Decided to model one based on other side's latch. Printed in ASA. I guess that ABS and PETG works as well. I don't recommend PLA due to cabin getting really hot on summer. I suggest…
PEUGEOT 206 TAILGATE/TRUNK/BOOT LOCK/CATCH/LATCH 7639 replacement plastic lever. Click in place
A0029880181 Clip für den Daimer, gedruckt in PETG oder PLA, ca 15 min.
Replacement for the Oval Type Sign on your W639 Mercedes Benz. The base model is just blank. Engrave your logo or custom text using the PrusaSlice 3mf. My company logo provided just as demo. Install using double sided tape. Replaces…
Lego 2420 77844 15397 2639 64799
Replacement for A1697420181 used in Mercedes Benz Viano / Vito. The advantage over the original part is that you can easily scale this model to fit into corroded and other wise enlarged stock holes. Ideally print in TPU since the part is…
Having lost the locking mechanisms of the fuse box located in the engine compartment of the Mercedes Vito W639, and not being able to find the closure clips online — nor wanting to buy the entire box — I decided to 3D print them. I know…
Quick fix in case your rubber gasket to hold the rear wiper in place and seal its break through went missing. Its not meant as a permanent replacement since the TPU we can handle is not as soft as the application requires. The original…
Camper Van Side Window Ventilation Insert / Grille A practical side window ventilation insert designed for camper vans Mercedes Vito. It provides fresh air flow while keeping the interior secure and weather-protected. Perfect for…
Replacement for the usually gooey or brittle 42mm plug used to seal 42mm holes in the wiper compartment of W639 Viano and Vito. Might fit other Mercedes Benz models BEWARE, this is made to print in TPU/Flex. Using any other non flexible…
Repair your broken A6398800985 by glueing this part onto the breakage. It will work with just superglue. But for extra strength, drill 1.5/1.75mm holes through the lashes and stick some filament through the lashes. Apply more superglue or…
This is a 3D-printable replacement part for the Mercedes-Benz A6399870125 . The model has been carefully designed based on the original part dimensions, ensuring a proper fit. It serves as a functional alternative to the OEM part, making…
A underdesk Mount for the Ugreen CM639 USB-C Dock. One side has a coutout for the Ethernet port, exept for that both sides are identical. I included the step files if you need to make modifications.
Replacement for A6397280056 door cover in case yours went missing or you want to improve water sealing. Emboss your logo or text using PrusaSlicer. BEWARE, print in TPU/Flex! Else it will not fit since the cover needs to be bend in place…
I lost one of them so make this for replace original, tight mount. Print this in PET-G
The printout settings are entirely up to you. Naturally, to mount it in your grille you have to cut out the holes. The fit is very tight and you have to find your own way to wiggle it on the original bulkheads properly. Depending on the…
In case you replaced your worn W639 automatic shift bag and knob for below pictured very cheap aftermarket on, here is a model of the cap to customize it. It prints in two parts to avoid supports. The two parts are joined by a key and do…
Elta VISION PRO trunk montage adaptor for Mercedes Vito, no screws, just slide to trunk bar. Fits when trunk bar size is 34mm x 22.2mm (width x height), maybe fits to other bar trunks but i use this in my Vito W639
print with supports and standing on one edge to get most strength and flexibility for the tabs. this replaces the original switch frame for the aux heater switch left of steering wheel. (in LHD cars) model needs further improvement as it…
The cheap replacement for A6397401535 i bought from Aliexpress came with a super flimsy washer clip that was supposed to secure one of the rods. It broke easily when inserting the rod. So here is a replacemement to save us from sending…
This adapter fully replaces the ugly stock phone holder while using its original mounting bracket for very tight fit and hold. This adapter adapter connects to the original bracket and uses the original screws. The original bracket looks…
W639 Mercedes Marco Polo - replacement stove pad I have printed with TPU A98 and they fit very nicely. First put pads in stove, after that put plate into pads.
Gridfinity Tray for the 26393 7 piece Hex Drivers with Picofinish handles Could never find one I liked, modeled my own. Not perfect, but holds them all well, and looks pretty nice. 3x5 Grid, 3U Height
Small adapter for a phone charger ( https://amzn.eu/d/03cWXQnv ) fitting the Air Vent
W639 Mercedes Marco Polo - curtain stooper replacement Printed in TPU A95
I also added the fusion file if you need to adjust the item.
Speaker adapter 165mm (6.5) inner diameter 144.5mm height 25mm
print with supports and standing on one edge to get most strength and flexibility for the tabs. this replaces the original switch frame for the aux heater switch left of steering wheel. (in LHD cars) model needs further improvement as it…
The printout settings are entirely up to you. Naturally, to mount it in your grille you have to cut out the holes. The fit is very tight and you have to find your own way to wiggle it on the original bulkheads properly. Depending on the…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…