Rope winder 16x9 cm
A rope winder for 2mm rope. Originally intended for 2mm arborist throw line.
- Downloads
- 133
- Likes
- 18
- Rating
- 5
Counting matching models…
A rope winder for 2mm rope. Originally intended for 2mm arborist throw line.
Important updates 2025-02-21: Made a parametrically generated focusing scale , generated as an SVG file using JavaScript, using FFD and helicoid size as parameters. 2025-02-16: Made an illustrated user guide that covers all the quirks of…
Summary NEW VERSION - Now includes mounting tabs!!!! OVERVIEW A speaker mounting bracket for 5x7/6x8 and 6 x 9 speakers (the STL placeholder is only an example). My goal is to enable 3D printing of speaker adapters for a wide range of…
Designed for the Apache 2800 case, for one Polk DB692 DB+ Series 6" x 9" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x8mm screws.…
Adapter to mount a 6.5" speaker with max 170mm outer diameter where a 6x9 speaker was originally installed
Spacer for clean mounting of Polk 6x9 on the Apache 2800.
Degreeless_Engineering 6x9 speaker can! Fits most 6x9 speakers! Since these will most likely end up in the heat, fiber filled filament is strongly recommended. I used Eryone CF-PETG . You will also need to supply M5 and M6 heat set…
2015 Ford F150 front speaker bracket for 6x9 speakers, probably will work with other models and years, but I've yet to test it on other trucks. Seal the bottom of the bracket before mounting if you want to, and drill a hole wherever you…
The argent eye was my first attempt at creating a 3D printable camera back in February 2020 and has been somewhat obscured by the fact that I kept it on Github. Despite being my first camera, it is capable of taking most, if not all the…
This is a spacer for used for mounting a Galeforce 6x9 speaker into the lid of an Apache 2800 series case. Normally printed in TPU for flexibility and durability, but can be printed in any material. Recommended 15% infill, 2 walls if…
This adapter was constructed by using this template: https://www.printables.com/de/model/593373-helix-compose-diy-flexmount165200 These are the speakers; https://www.audiotec-fischer.de/helix/lautsprecher/compose/i3/ci3-w165fm-s3…
Attach 6.5 and 6.75 speakers to a 6x9 factory Toyota/Lexus mount. Category: Automotive
I use this in my Beseler 23C series II to print negatives from my Fuji GW690. I opted to design the carrier as two separate parts with a few interlocking registration features rather than trying to integrate a hinge as the metal…
This adapter was constructed by using this template: https://www.printables.com/de/model/593373-helix-compose-diy-flexmount165200 These are the speakers; https://www.audiotec-fischer.de/helix/lautsprecher/compose/i3/ci3-w200fm-s3…
Print it face down, I printed with ABS, tends to be my go-to. Fits perfectly, includes water deflector although it is very thin. Hole in top centre is for passing through the wiring, I used factory speaker connector adapters. 4mm screws…
Needed a gasket for my speaker for my car. This is a 6x9 gaskets worked well and seal it air tight. Used PolyFlex™ TPU95 Print Slow
***************Notice*************** This design is intended to be printed with 100% infill and may be subject to failing with less infill/few perimeters as it is a load-bearing part. This design requires the original tab-style mounts in…
Collection of screws (ISO 4762 / DIN 912) including : M16x 16, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
simple print in place negative carriers. print in PETG, no supports required. use pliers to hold outside of hinge with carrier main body then snap the pivoting core away. the outside bit and the main body move as one with the hinge…
Designed this to swap the sub with a Dayton DCS165 as per this thread on MaverickTruckClub. https://www.mavericktruckclub.com/forum/threads/simple-b-o-upgrade-and-sub-solution.38884 I printed in ABS 30% infill, 5 layers top and bottom, 4…
Printed on Ender 3 Pro. I would suggest printing the two sides seperately even if your printer is big enough for the full model. The sides are made to allow enough leeway that a few mm adjustment can be made without a problem.
Simple trays to hold abd layout PONY BEADS for kids crafts. Printed in clear PETG so the trays can be placed over a printed layout guides (available online) for various 2D bead designs, or just used to organize your beads.
6x9 grill with no cutout for tweeter or logo. meant to replace the original grill in a previous design
Will need to be glued together, I suggest 2 part epoxy. Screw holes are 6mm, meant to be used with 5mm heat set inserts. Fits Audiofrog gs690 As with anything printed to go in a car, use petg or better. Feel free to modify to fit your needs
“Vertical LED Light Bars for the Prusa i3 MK3S/MK3S+” modified to use black "Worthy-A" 16x9.28mm aluminium led profiles (24cm each) and mounted on "Remixed Mounts for Vertical LED Light Bars for the Prusa i3 MK3s/MK3s+". Using "v-tac…
I made my own adapters to better fit my use case on my 2024 4Runner for my C2-690tx speakers. The same adapter can be used for both front doors. The only difference is the CCF ring for each location. On the front doors, the inner door…
Grill for polk 6x9 with star pattern and logo spot. meant to replace the original grill in a previous design
De Vere 6x9 negative holder Category: Other
Grill for Polk 6x9 with no spot for logo. meant to replace the original grill in a previous design
Adapter to mount 6.5" speaker in 6x9" space. Remixed for smaller print bed with additional clearance.
Louis Vuitton 6x9 Speaker Grill
Testing version (I call it v0.9), some issues (read) My design of minimum size (75ml) developing tank for one single sheet of 6x9. You can adjust the spool size - so it can fit 6,5x9 cm (European) or 2 ¼ x 3 ¼ in (US) sheet. Daylight…
This is a fun little project inspired by Ligero69. Though it's not a remix, but it's designed from scratch. DISCLAIMER: Modifications to the camera are not reversible (you need to cut things). Do it at your own risk. HOWTO, in short: 1)…
This model is for the Graflex Film Pack 2 1/4 x 3 1/4 (6x9) holder. It allows to use a half 4x5 plate for wet collodion. The square part will fit perfectly inside, and is designed to put pressure into the plate. If you want to use a glass…
This adapter let you use Linhof quick change backs (like the Super-Rollex rollfilm holder and ground glass focusing screen) on Mamiya Universal Press. Clamp the adapter to the back first. You may want to use an M2 screw to fasten the…
Self standing photo frame, vertical or horizontal. Easy to print without supports. Material PLA or PETG. Printing time 38 minutes, filament 10.82g
Grill for 6x9 with 1.75" tweeter cutout. meant to replace the original grill in a previous design.
Grill for 6x9 with 2.3 inch tweeter cutout. meant to replace the original grill in a previous design
The original three variants didnt work that well with my printer so I made one that is in between the tight and standard tightness. Also added a variant with 6x9 spaces to hold more bits
Linhof Technika III IV 6x9 LensBoard
Baltimore Ravens 6x9 Speaker Grill Cover
Upgrade your car audio, garage setup, or tailgating boombox with this custom 6x9 speaker grill cover featuring the iconic Chicago Bears logo over a clean hexagonal mesh. The grill uses standard mounting-hole spacing to fit most 6x9-inch…
This is a 46x95x15 bearing. The bearing use POM balls (Amazon, Aliexpress, ...). Use the chain "solid plastic pom ball" to search on internet. Features Internal diameter : 46mm External diameter : 95mm Width : 15mm Balls : 12 POM ball…
6"X9" frame. You will need to purchase turn buttons if you don't own a point driver. Space was allowed on the frame for turn buttons, see assembled photo. I recommend using Acrylic Glazing instead of Glass. I have not tried glass and do…
4x5 Hard Matte 16:9 is a 4mm-thick light control matte designed for standard 4x5 filter trays. When used with the KONDOR BLUE Matte Box System, it drops into the front filter slot to reduce unwanted reflections, increase contrast, and…
Show your San Francisco football spirit with this decorative oval honeycomb grille. The model features a sturdy outer frame, four mounting holes, an open honeycomb center, and a raised multicolor SF-inspired badge. The layered…
grill cover featuring the Detroit Lions leaping lion emblem centered on an open hexagonal mesh. Built to match standard 4-hole mounting dimensions for 6x9 coaxial and component speakers, this design delivers sturdy cone protection against…
New York Knicks 6x9 Speaker Grill, Have fun.
Convert your standard VALOI easy120 6x9 film holder into a versatile multi-format system! These drop-in masks allow you to seamlessly shoot and scan 6x7 and 6x4.5 medium format film without buying entirely separate holders. They are…
This spacer is a kludge I built to use my Horseman 90-degree finder to calibrate my Polaroid 110a conversion. It's good enough, but not great by any means.
I used steep chamfers so the model prints without supports. Made the snap fingers a hair smaller in diameter, because the originals were very tight, these still are also plenty tight.
6x9 Milwaukee Bucks Speaker Grill Let me know if i can make you something
This should be printed with ABS. It is designed to use all original screws for the mount and for the speakers. I have split the model to be able to print in two pieces on a smaller machine. 4 walls 30% infill or more
Gridfinity box in dimensions 6 x 9 x 9u. Generated with https://www.gridfinitygenerator.com
This model is a stackable container to safety store and transport you lenses mounted on 4x5 Linhof Technika Lens Boards. This design uses a widely available IKEA 365+ mix and match series, rectangular lid. IKEA Article Number: 405.779.43,…
Wall mount holder for 6x9 inch notebooks. This is intended to attach to the wall with standard size command strips and includes cutouts so that the command strips can be removed easily. There is also an optional pen holder that can be…
Designed for the Apache 2800 case, for one Polk DB692 DB+ Series 6" x 9" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x8mm screws.…
I used steep chamfers so the model prints without supports. Made the snap fingers a hair smaller in diameter, because the originals were very tight, these still are also plenty tight.
Will need to be glued together, I suggest 2 part epoxy. Screw holes are 6mm, meant to be used with 5mm heat set inserts. Fits Audiofrog gs690 As with anything printed to go in a car, use petg or better. Feel free to modify to fit your needs
This adapter was constructed by using this template: https://www.printables.com/de/model/593373-helix-compose-diy-flexmount165200 These are the speakers; https://www.audiotec-fischer.de/helix/lautsprecher/compose/i3/ci3-w200fm-s3…
simple print in place negative carriers. print in PETG, no supports required. use pliers to hold outside of hinge with carrier main body then snap the pivoting core away. the outside bit and the main body move as one with the hinge…
Important!!! In Cura, go to Experimental->Slicing Tolerance and set it to Exclusive. Then in Shell->Outer Wall Inset and set it to 0.2. This and printing on a raft will ensure your tolerances are good enough so you won't have to sand…