245 models
This is inteded to be used for display, cosplay or educational purposes Printing: Print all parts in the given orientation. Support is needed for the pegs. I remixed the original model and took the details from this YT video. it will also…
I don't actually own one of these phones. If you get a chance to try it, let me know how it goes. My personal preference is to turn off top and bottom layers and use a 19% honeycomb infill, see screenshot.
Click here for 1.25" hitch version Timelapse print and demo video This model has been modified to be one-piece and trimmed on the bottom so that it can print with the bottom flat on the build plate. Print with tree supports in Cura and…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 7 perimeters to plates 5 perimeters to the knob 15% Infill For Knobs' better grip texture, we recommend you to use…
This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell. I included 2 heads - 1) the original 1995 anime version with horizontal slit eyes and 2) the 2017 version which has 3 dot eyes (not screen accurate - 2017 version…
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…
This model is compatible with the lego system.
Adapted for the MRD068A ESP-32 Screw Terminal adapter. Hole spacing is 60mm. Need to print 2x ESP32-Terminal-DIN-Mount.stl
A more enclosed version of a linked file
For an even better fit and some additional padding, I lined the inside edges with a few strips of electric tape. It really makes a huge difference!
Model of Claymore mine with socket dedicated for Xiaomi Mi Home Motion sensor. I use it as a sensor for my home alarm so I think, Claymore is a perfect holder for that ;) Simple remix of design created by nathanaelbanden on Thingiverse.…
I use the original jeoje's model but adding the plate for the handbrake, and the holes for the thrustmaster th8a. Assembly Instructions: This was designed to be assembled with 30mm M3 screws with 5.5mm nuts. Print Settings Rafts: No…
A case for your Pixel 8a that can easily be printed with TPU with a Shore hardness of 95A or harder; 98A is probably best to make sure the case doesn't slip off. (I printed with 95A - would love to hear some feedback on how it went with…
Description Wall mount for Honor Pad X8a 11" tablet. Minimalist design that does not disturb and follows the line of the tablet. The power cable is hidden. The small gap between the wall and the tablet allows for better cooling and…
This is a case for the popular GM328A transistor tester. The case is able to be printed with no supports, and requires Four M3 socket head screws and four M3 square nuts to assemble. The circuit board is captured between the top and…
I needed a decent case for the recent edition of gm328, but did not want to fiddle with screws. Found a good model by machanzar and tweaked it slightly. It should not require any screws now and works with a friction fit. Worst case…
This model is compatible with the lego system.
This is a 60.86 mm diameter by 352.49 mm high model of the M38A2 100 pound inert practice bomb. This was filled with sand and sometimes a small marker explosive then used during target practice in the forties and fifties. The originals…
The Sparco gear knob is a popular low cost shifter for your Thrustmaster TH8A shifter, but the fitment leaves alot to be desired. This adapter securely mates the TH8A thread to the internal diameter of the Sparco knob with zero flex .…
This model will fit the new 8Ah smart Parkside battery .
The case includes cutouts for the side buttons, SIM card, microphone, speakers, and USB-C connector. There are circular openings with channels on the back for better heat dissipation. IMPORTANT NOTES: The bottom side of the model…
There are many variations of the GM328A component tester, this case is for the “2022 Type-C” model. There are many variations of these boards out there and none of the other cases fit my model or my needs. The files are pre-oriented for…
A beautiful shifterknob i remixed Shortened and rethreaded to fit Thrustmaster TH8A Printed in Polyterra black 0.2mm
Printing recommendations I've printed a first prototype in PLA, we'll see how long it lasts. Might print an ABS/ASA one and vapor smooth it for better finish. 0.15 LH 0.4mm nozzle No supports required Use high infill (I've used 50%) to…
Click here for 2" hitch version Timelapse print and demo video This model has been modified to be one-piece with extra strength attachment at the end of the 1.25" hitch. The hitch has also been lengthened an extra 10mm to fit into a Reese…
This model is compatible with the lego system.
I designed a screw on shift knob for the Thrustmaster TH8A shifter. Just remove the old one and screw on the new printed one with a little presure from above. I used PETG.
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
The Convair B-58 Hustler was a supersonic strategic bomber, capable of flying at Mach 2. It was made to fly high and fast to avoid Soviet interceptors. The B-58 was unlike other bombers, that begin it had no bomb bay or weapon pylons.…
I based the dimensions for the the hose openings off of Radium PTFE black carbon braided hose. So fit might be a little different with other hose. The center hole is designed for an M4x25 socket head screw and threaded insert. The hole…
TH8A shifter Playseat Challenge mount Robust shifter mount for mounting Thrustmaster TH8A to a Playseat Challenge sim racing chair. Printing Rotate the models as shown below. Use supports. Use at least 5 wall loops. Mounting Use six M6…
Full-featured case for GM328A TFT Transistor tester variant and 18650 Li-Ion battery. Charger module is Q3962A with attempt at light conductors for it's indicators (and it actually works). Step-up module is MT3608. Knobs are from some…
This model is compatible with the lego system.
Playseat Challenge mount for a Shifter (TH8A/G29) with handbrake mount
Keychain Jeep CJ-5/M38A1 , front mask Klíčenka Jeep CJ-5/M38A1, přední maska
This is a mockup model of the QTR-8RC and QTR-8A line sensors from Pololu. I made it to help me designing my new line follower and hope can be useful for someone else. Dimensions used were found on the Internet because I don't have the…
The coupler allows you to remove the dust box and attach a 1-7/8" shop vacuum hose. I use this one and I love it! You may have to sand down the inside of smaller part of the coupler to get an easier fit. Here's a link to the exact sander…
A beautiful round, ribbed flower vase for decorative purposes to hold artificial flowers. It is similar to vase 848 but with a couple of more twists. It is 225mm tall and 157mm wide. The photo shows the vase printed in vase mode. It can…
Hier ist ein Scan von einem Pro Core Bosch 8Ah Akku, sollte gleich sein wie andere Bosch Akkus, bis auf die Grünen Akkus natürlich. Kann benutzt werden für sämtliche Halterungen oder andere Anwendungen. Wurde gescant mit dem Creality Otter
A tiny blocker for the Thrustmaster TH8A shifter. It's a bit longer than other models, to block the path to the 7th gear. In a normal movement to the right, you will hit the print and with a bit pressure you can go into reverse. Print…
I made this bracket because i bought one without a bracket and want it lower from the table. 2 M8 nuts and 2 M8 wing bolts are require.
This model is compatible with the lego system.
This is a wall mount for the HONOR Pad X8a, used in my case as a Home Assistant dashboard. The left-hand side of the mount is removable to allow the tablet to be inserted and removed, and it uses tabs to connect to the main body.…
This model is compatible with the lego system.
official site info: https://www.emaxmodel.com/es08a-ii.html Size may be different from the official site, but this is the actual purchase of more than a dozen measurements and includes all the relevant size. Category: Hobby
Printed in PETG Layer 0.2 mm Infill 20% 3 Perimeters
Cable clips, for clean wiring of the Gaggiuino Mod. Suitable for 18AWG high-voltage cabling as well as 22AWG low-voltage cabling. Should be printed from heat-resistant material. At least PETG, better ABS.
If you have installed a short shifter mod, you'll find that there is no protection from scratches on your gear lever stick from hitting the faceplate. Sure you can heatshrink some tubing, but that will only last you a week before you'll…
I printed mine with TPU and it is holding up nicely.
Hardware needed: 8x M3x10mm screws 4x M3 nuts Rocker switch 29x12mm (feel free to remix if using different one, hole in default design is 30x13mm, max depth is 27mm) 9V battery and connector Panel mounted 4MM banana sockets GM328A board…
Jedná se o remix modelu friction fit GM328A case od autora kolba Přidány číslice 1112333 pod měřící objímku, upraven výřez pro displej (je vidět pouze displej), přidáno osazení pro hlavičky šroubků, spodní část zvětšena tak, aby se…
Remixed Harsesis Playseat Challange Shifter (TH8A) and Handbrake (Moza HBP) mount according to his recommendations which was to move the hand brake a bit further to the front and the shifter a bit to the outside (right). Also added slots…
With printed 3.5mm pads Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 50 Filament: CCTREE PLA Category: Hobby
https://www.youtube.com/watch?v=KhLWvCct6ng&ab_channel=MarcinPaska
Which collets will fit? 401E (OZ8), DIN 6388A Found in spindles/routers from Kress, AMB, Isel, Mafell, Stepcraft Each position will accept collets with or without nut attached (tested with Kress/AMB nuts) A short type 17mm-spanner will…
My collection of custom shift pattern plates for the Thrustmaster TH8A Shifter for use with ETS2 and ATS. The following gearboxes are covered: Scania 12 and 12+2 Volvo 12 and 12+2 ZF-12 and ZF-16 Eaton Fuller 10, 13, and 16 There is also…
I bought my shifter used.. with no clamp, sounds like a project for the 3D printer. The clamp turned out pretty tough, seems with withstand the abuse. Only time will tell. Brief Instructions: -To reinforce and add to the longevity, i left…
I've done a couple of changes since the original model: Made it a bit shorter (doesn't affect the overall length as the thread is in the same place). Split the model into 3 to print the middle part in a different color.
Remix of Jerrari's excellent design, to hold the LED R18ALF-0 worklight. See my other remixes for variants to hold the circular saw and jigsaw.
A shifter mount i made to side mount onto a piece of 8040 so that i could have both my sequential shifter from moza and my thrustmaster th8a (with trucking shift knob) at the same range from my seating position. Uses 4xM8 bolts (with…
just a nice tray for the BOSCH ProCore 8Ah battery (also called Profactor)
Based on Zack Friedmans gridfinity system this is a 4x1x3 (or half a unit high) module and is stackable with other gridfinity units
This way I would like to say hello to person who tore off one of my headlight wipers. The model is not 100% same, but it fits nicely and holds the wiper blade firmly. I ignored the sprinkler piece, because it would be hard to print and I…
The JC66-03278A is a Samsung gear-lifting cassette component designed for specific Samsung multifunction printers. This part plays a crucial role in ensuring smooth paper handling and consistent performance. It's compatible with models…
I designed this to try to match the feel of my GT86. I printed mine with 80% infill for the extra weight.
. Print Settings Printer: JGaurora A5 Rafts: No Supports: No Resolution: 0.32 Filament: Generic PLA / PETG Notes: Design for a 0.6mm noozle Category: Replacement Parts
This is a Model for the M48A2 Räumpanzer Tank
The M18A1 Claymore Case is a fully 3D-printable mini-PC enclosure built to look like the M18A1 Claymore anti-personnel mine including the "FRONT TOWARD ENEMY" lettering and the tripod stand. Underneath the tongue-in-cheek military shell…
No other tools required. I printed it with the sturdy profile, arachne, and a 0.6mm nozzle on a P1S.
ECO-WORTHY 12V 8Ah 96Wh LiFePO4 Battery with F2 terminals on 45mm center “SLA” form factor : 65.5mm(d) x 151mm(w) x 93mm(h) [ Need to scale for different batteries ; now includes: original ECO-WORTHY model with terminals set at 45mm…
A gridfinity module based on Zack Friedmans system. For storing a Starrett 18AA Automatic Centre Punch. 3x1x3 (or half a unit high) the unit is stackable with other gridfinity units sitting nicely on top
The hole is 8.5mm so you can take a M9 thread cutter to make it fit on the original shifter pole.
I am low on desk space, but had a wall mounted sever rack that I am trying to fill. The Cre8Audio NiftyCASE was the right width minus the mounting hardware, so I made some. These rack ears are designed to replace the wood cheeks on the…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
This is a common failure point on the Audi A8 D2. I tried to model this battery terminal assembly 1 to 1 but it could be adjusted to make it easier to print and build a new one. This should a be a great start to modify the design however…
10 inch rack mount for a Sodola 8 port 2.5g + 1 port SFP+ web managed switch (SL-SWTGW218AS). Remove the front two screws on both sides of the switch, replace with 2 longer M3 screws to secure to the print. Printed with Sunlu white PLA on…
Mise à jour du 15/10/2024: Ajout de 2 profils pour la XL 5T et la MK4. vous pouvez augmenter la vitesse de 130% sur l'écran LCD de l'imprimante ( au niveau des réglages.…
A mod to reduce the shifter to a 6-gear version. No more accidentally slide into the 7th gear while shifting into 5th.
The original model by ressu can be downloaded here . Changes from the original: Redesigned the wall near the lever. The original model has a strange dust-gathering hole there. If you measure SMD components, a tiny thing can jump inside…
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 112mm tall and 83mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
Do pobrania mój projekt obudowy i zasilania do Analizatora/Miernika GM328A. Do zasilania wykorzystane ogniwo 18650, lista części: Miernik GM328A https://alii.pub/6vtt92 Konwerter J5019 DC DC Step Up i ładowarka Li-ion Wskaźnik baterii 1s…
Recommended for things like drivers licenses, tap-to-use entrance cards and the like. cards that need accessed daily are not recommended unless you print in TPU. PLA works great, but I haven't tried PETG. Any makes posted are appreciated,…
The intermediate apparatus I designed to attach the Scania gear shift knob.
TH8A Shifter Mod Block to make the shifting feel more tactile.
Despite capacitive sensor is probably not the best idea for MK3s extruder due to weight and lower precision, my personal experiences are good. Mine is LJC18A3-H-Z/BX. I like it as sensor do not touches bed (unlike bltouch) and will…
I resized the original model so that it fits my KAIWEETS HT118A multimeter, and also added a section to hold a 2nd set of probes with alligator clips. Thanks to blackjack220 for the original model. I printed it in SunLu Grass Green PLA+,…
A rail for a Bosch side-by-side KAN58A40 fridge. It's designed to fit upper drawer. Just mirror along Z if you want a right side model. Print instructions I've printed mine with PLA .20 profile.
Scania 12+2 , Volvo 12+2 , Eaton 18 , ZF 16 pro řadící páku TH8A
Remix of just the surface part from https://www.thingiverse.com/thing:3569302 to provide the bolt holes for the TH8A. There are several other TH8A remixes out there - but they also tend to merge the surface and outer bracket. I am…
Small and practical hook to mount a Google Pixel 8a (with case) to an airplane seat (tray table and/or magazine holder). Width of the phone with the Nillkin-case is 72mm, should also fit for other cases. Best printed in PETG. If there is…
Gridfinity Bin for the Kaiweets Multi meter - Model No HT118A or HT118E Storage for the leads under the meter when not in use Cutout for the leads Stoppers for the stand when the meter needs to placed at an angle Slots to rest the probes…
This is a quick description on mounting the LJC18A3-H-Z/BX on an Ender 3 as an alternative to ready made kits available on the market. You need some soldering skills and a bit of electro-technical knowledge. If you don't know what you are…
I have designed a 3D-printed replacement handle mount for the WHIRLPOOL SW8AM2YWR2 fridge door handle. This part closely resembles the original, with a slight modification - it is approximately 3mm thicker to improve its durability. When…
Warning! Experimental! This part is still being refined and tested. I am posting it here for anyone who would like to try it out. This is a replacement part for an Atlas 7B metal shaper, specifically the "S7-68A disc and gear." As…
5-position hot air rework nozzle holder designed with the Aoyue 888A rework station in mind, although it may fit other models. The Aoyue rework stations are made by SRA Soldering Products with a 21.5mm inner diameter on the nozzles so any…
This mount fits the Maddalena MVM water meter, which is commonly installed in Belgium (Watergroep). The mount holds a proximity sensor with a diameter of 18mm, such as a LJ18A3-8Z/BX. I used this sensor as a pulse counter to get water…
This model is compatible with the lego system.
I've previously mounted my modems/routers/switches on a bare wall in the basement. This is another simple mount that fits the AT&T U-Verse VDSL Modem. Print 2x mounts and screw into the wall around modem. I printed this in black PLA with…
The storage boxes that are situated in the door of the Siemens fridge are made of hard plastic. If the plastic which holds the box in the door breaks the box starts hanging down at first and after a while it will fall out of the door. The…
A simple holder to fix an LJ18A3 inductive pulse counter with 18mm diameter to my Elster water meter. Couldn't find the exact type of the water meter, but it has two small (slightly less than 3mm) holes in the outer rim. You need a…
