Fiskars P921 locker
A “copy” of a broken original Fiskars part. Could have been made better but it works.
- Downloads
- 30
- Likes
- 5
- Rating
- 0
Counting matching models…
A “copy” of a broken original Fiskars part. Could have been made better but it works.
I designed a PCI full height bracket for my LSI 9211-8i HBA card since it didn't come with one. I used two M3x8 screws that can cut their own threads, but you can also use M3 nuts to secure them (I did). The two holes are spaces 54mm…
In 1921 several beer brewers (o.a. Heineken and Oranjeboom) ordered standard refrigerated wagons from Eva in Wismar, Germany. They were registered as private wagons by the Nederlandse Spoorwegen (Dutch Railways) This is my interpretation…
Wall mount pieces for Lego set 92176 Saturn V Rocket. 2-piece set to vertically mount Lego Saturn V rocket. Print WallBase piece with the wall facing side on the bed (No supports required) Print TopClamp piece flat with long arms parallel…
4 new variants : #1 lsi-fan-bracket-v4-Finished Bracket No holes in the pillars v2.stl - Only holes in the pillars removed, for a Noctua fan #2 lsi-fan-bracket-v4-Finished Bracket Noctua Raised pillar v1.stl - For a Noctua fan, holes in…
This model is compatible with the lego system.
You need to glue two wheels on the axles. The axles/wheels turn. The photo is of an earlier version of this truck.
Used to align and reinstall oil cooler on Porsche 944 with early OPRV. Warning: This tool has NOT been tested yet. Use it on your own risk. The tool is based on rough measurements found on Rennlist forums. Should fit though. Made this as…
This model is based upon the nominal dimensions of Stanley (R) Utility Blade No.1992 (11-921). Actual blades may vary in tolerance, as shown in Patent Drawings . I have not attempted to print this, but I've been using it to assist in the…
921973Z520 hyundai i40 headlight mounting
This model is compatible with the lego system.
This 40mm PWM fan mount is for 9211-8i cards that use a 30x54x10mm heatsink, such as the Fujitsu D2607 variant. I might even work with the LSI 9260-8i (IBM M5015 variant). Fans are screwed in on the backside so you can add thicker 40mm…
Spare parts for the playmobil police helicopter set - I replaced the rear stabilisers, rotors and skid sled for the bottom. The sled is no longer compatible with the light sadly as this had gone on ours so I had nothing to reference it…
For the Milwaukee 48-32-9921 Customizable Medium Case (One of Milwaukee's newer cases that fit Packout systems - not a Shockwave case). They hold the “The Original Thread Checker” set, except for the two largest sizes each for imperial…
Low profile bracket for LSI 9212-4i4e SAS HBA adapted from https://www.printables.com/model/244218-pci-low-profile-brac
Its a box to catch plastic waste. Insert 2 magnets into the slots. put 2 more on the outside of the box and attach foam tape to those magnets. Gently push against the side of the printer to align the mounting magnets. Includes design file.
Philips - Marathon FC9218 floor pro Funktionale Reproduktion des Staubsauger Verschluß, da das Ersatzteil nirgends erhältlich war. gedruckt mit PLA seit ca. einem Jahr im Einsatz Lock of bagless vacuum cleaner printed with PLA in use…
A somewhat rough but high poly scan of a DeWalt impact driver. The battery is attached but not fully scanned and there was a little wear and tear on this tool. This should aid in designing mods, accessories, mounts and various other…
This is a throat plate I created for use on my WEN 3921 Scroll Saw, with much smaller clearance holes. When cutting finely detailed wooden cutouts, sometimes the pieces would snap because they were not supported underneath by the original…
Remix of a LSI 9211 PCI bracket to be stiffer and printable without support
This model is designed to be used to create cutouts or mounting points for the 8 digit 7 segment max9219 display circuit board. Included is the STL file and also the openSCAD source file so you can use it in your own openSCAD projects too.
Rack ears for the Cisco 1921 router. Printed this in PLA and there is no way it can support it "hanging" in mid air so additionally added 1U support feet too
Snap-on fit magnetic bit and fastener holder for the DeWalt DCF921 or DCF923 impact drivers. Bits are NOT firmly held, magnets hold the parts in place as you climb ladders etc but leave the bits freely accessible for one-handed use. Great…
Babyphone Halterung Philips Avent 2-Teilig mit einstellbarem Winkel. Zusatzmaterial: M6x25 (Innensechskant) / M6-Mutter Die Klemmplatte hat eine Aussparung von 17mm, kann nach belieben angepasst werden.
Kawasaki CAP DUMMY (11065-0921). I lost one so I made a copy of the other one as buying will be expensive on my country (because shipping). Prints in ~40 minutes, 0.4 nozzle, 0.12 resolution, 35 mm/s with supports on an Ender 3 V2.…
A insert for the Milwaukee Packout version of the shockwave case that has a clear top. I bought the radius gauge set off amazon, but you can find the same set on aliexpress, etc. Print Settings: Material : PLA Supports: Yes - Automatic…
3D scanned holder to precisely fit the contours of the DC921 and DCF923 impact drivers for DDD Wall Control System
The source marked this model as adult content.
Who's that in the corner rocking back and forth? Why it's Doug-921! Someone must have asked them to turn in some paperwork they forgot to work on. You ok Doug?? Yeah, They'll be fine…… Full of surprise and fear, They work as a paralegal…
I had a lot of Elbro E27 8921-02 provisional lamp holders laying around and wanted to give them some use. So I designed this Lamp. (maybe I'll do a version for other ones, if there is demand) Print Settings Printer Brand: Anycubic…
You are doing me a big favor by clicking the Like button :-) Print with 0.10 mm layers Start with the color blue On 2.10 mm switch to gold (silk) https://en.wikipedia.org/wiki/KLM
I made this because my clutch petal broke and they don't make the clip so I made it myself. Do about 20% infill and hexagon infill and my printer can't do the final one and I made it strait because I have the Adventurer 5M printer and…
Insert for a Milwaukee 48-32-9921 Customizable Medium Case to hold the Freud 99-762 Premier Adjustable Rail & Stile router bit set (Shaker profile). Replaces the big retail plastic box, saving space but more importantly better protecting…
This is stand for Philips All-In-One 5000 Trimmer Stand (MG5921).
Replacement of the little thingy that keeps the spacer for the powder measure (if used with a small powder bar) in place. Fusion 360 file is included. Category: Sport & Outdoors
A very basic insert design for the Wen 3921 scrollsaw. The one that came with it is a bit flimsy because it has cut outs for both directions of cuts. Step and Fusion360 files for modifications.
Needed something more low profile than my 20mm thick noctua but also wanted silent operation and decent cooling. This fan is overkill for this application, and its not really that much thinner (40mm) but it does the job. My previous setup…
The story of this design is that I needed to replace some Uponor Valve, so I begrudgingly bought this black plastic part for a shocking amount of money only to find out that it did not fit my model after all. I'm not all too mad about the…
Heckscheibe Stecker Gehäuse VW Heckscheibenheizung OEM 171 971 921 / 1H0 971 921 Kabelschuh Flat Contact Housing OEM: VAG 1H0 971 921 A or/oder 171 971 921 Passend für u.a.: Deutsch: https://webautocats.com/de/etka/part/1H0971921A/…
Category: Bathroom
I used SBS filament for printing this, and it print more quality, than it been printed from PETg before.
I needed to mount the card at the bottom PCIE slot on my motherboard but there was 0 free space between the holder and the PSU, which would prevent the Noctua fan from doing its job. I redesigned to hold the fan by the little indents in…
This is the first model I've ever uploaded as I couldn't find a bracket online for this model of router. The base is a little thicker than it probably needs to be but that's mainly to countersink the screws properly and still have some…
I was looking for this original model, tried it out and It works great. I know I'll lose the tool though and I've been meaning to learn how to create or modify models instead of just downloading them, so I learned how to combine the tool…
Laptop fan shroud for LSI 9211. You have to file and cut some parts.
Replacement carrying handle for the Hama Star 61 tripod (921041) since the original have a design flaw that makes it very keen on breaking. Designed so the original hook is a loop instead for better strength & durability. Made in 2 parts…
Alternativní "pouzdro" filtru HF10 ETA pro odvlhčovač Rohnson R-9212. Jsou zde použity kapsy pro magnety 10x2,5 mm.
I separated the wheels and axles from the body. Then I made a new axle with a flat on side so it can be printed laying down, much stronger this way. I also keyed the axle into the wheels and made the fit tight so glue may not be needed.…
ATTENTION: This model was created for the screws and nuts to be added separately afterwards. It is better to print with PETG, as PLA would melt around the screws because they would get hotter and more quickly. Even though it was measured…
This is a remixed model of a grommet by "Cosinus900 - SAAB Part# 9464926" These clips are meant for the outside trim strips of older 9-3 NG models. The clip replaces the male part only - you will need the female grommets in the doors for…
Latch lock for HUIJIAQI 53 in 1 Multi-Purpose Precision Screwdriver set 8921
Podložka blokující pohyb koleček pro odvlhčovač Rohnson R-9212
A friend needed one, apparently it worked so I'm putting it here for others to use. I hope it comes in handy. I forgot to take a photo of the finished print and printables won't let me post without a photo so the photo is the source…
Designed for LEGO set 40921, this mount supports the astronaut beneath both feet while providing clearance for the air tanks behind the figure. The compact platform and shallow underside braces keep the support discreet when viewed from…
Puch Maxi E50 - Clutch Bell Bushing - 34921.201.111 Part number: 34921.201.111 Outer Diameter: 17mm Inner Diameter: 15mm Length: 22mm Oil Hole Diameter: 2.5mm Oil Hole Center Axes Distance From Edge: 8mm End Chamfers: 0.2x45
3 different brackets. The FirstSecondStage bracket printed 4 times to hold the first two stages of the Saturn V. It is sufficient to print the ThirdStage bracket once to hold the third stage. The openings of these brackets are not…
map of British Empire 1921 (redo)
I needed to mount the card at the bottom PCIE slot on my motherboard but there was 0 free space between the holder and the PSU, which would prevent the Noctua fan from doing its job. I redesigned to hold the fan by the little indents in…
I made this because my clutch petal broke and they don't make the clip so I made it myself. Do about 20% infill and hexagon infill and my printer can't do the final one and I made it strait because I have the Adventurer 5M printer and…
First of all, thank you eglobetrotter for your awesome design! I remixed his work to fit the new Philips Avent Connected SCD921/26 camera. I printed everything (in Prusament PETG Urban Grey - PLA is fine) with 3 perimeters on my Prusa i3…