Triton TRA001 Base - Thicker
I was asked if I could print out a base for a Triton TRA001 router but "two or three times thicker" This one is 6mm thick Remixed from a model found on thingiverse
- Downloads
- 126
- Likes
- 16
- Rating
- 0
223 models
I was asked if I could print out a base for a Triton TRA001 router but "two or three times thicker" This one is 6mm thick Remixed from a model found on thingiverse
With this little wrench, you can open the spring side of some SR Suntour bike forks. I printed it in PETG with 3 perimeters and can confirm it works :) I used PrusaSlicer to close a hole and add an embossing to jcatx' SR Suntour fork…
End cap for PowerXT 24" level (YT24A00). One cap was missing on mine & the exposed metal was a bit sharp. This printed PLA part press fits tighter than the original. Print with the exposed end facing up. Full supports underneath since…
Might need a bit of sanding. Infill: 100% Supports: Yes
Originally published here: Samsung Galaxy A02 & A12 & F12 & M02 & M12 case by tato_713 - Thingiverse This case was designed for the phone Samsun Galaxy A12, but by its size, shape and button places, its compatible with the A02, A04e, A12…
I recently attended bike tech workshops through the Professional Bike Mechanics Association (PBMA) where I received training in a whole bunch of different things from many different brands. I was constantly thinking "I bet I can 3D print…
Phone case for the Samsung A03 Printed in TPU (Varioshore-TPU). Do not print in PLA or PETG. It won't fit! More 3d-printing tips on my website: https://c-arts-modelle.de/carts_modelle_web/3ddruck/3ddruck_tipps_engl.html
Originally published here: Samsung Galaxy A02s & F02s & M02s case by tato_713 - Thingiverse This case was made for the phone A02s and M02s (a025 and m025 models); for the A02 or M02 case (a022 and m022 models) see this post . It is…
Handy case for 1.28 round display (GC9A01 driver), 240x240. There is also hole for cables on side or you can use display pins at the bottom. Easy print, no supports. BambuLab X1C 0.2 20 infill PLA+ no supports
This is a easy printable housing for an ESP and the GC9A01 display. I used theese parts from Aliexpress: https://de.aliexpress.com/item/1005009157701999.html?gatewayAdapt=glo2deu…
Samsung A04s smartphone-case Rigid smartphone case With raised lip (height about 1.5 mm) for a better protection of the display. Printed in TPU. Do not print in PETG or PLA! The case will not fit! More 3d-printing tips on my website:…
Samsung Galaxy A05s cover I realy liked 3d honeycomb effect with 40%infill, that creates almoust fabric like texture. A05 cover does not fit to “s” model, but I think this will fit to A05, but side buttons slots are bit too long. TPU…
JAVELIN JA-06 is an aircraft with 4 jets Can attach different stuff, you can check my free models or paid Check .ZIP file for detached STL parts
osVAC Triton TRA001 / MOF001 Adapter
hello, this is the basic model of the case for this mobile phone, which copies its curves and protects not only the camera lens from scratches. Enjoy, made with love
I made a holder/bracket for the 3A0972695(A) VW OBD socket used in most VAG cars. Fusion 360 file included so you can modify it for your needs.
Funda para Samsung Galaxy A06 5G, mas archivo en Fusion 360 para seguir modificandola y mejorandola a gusto.... Y GRATIS
This project is a good flying model for ONLY for A08N KST SERVOS !!!!!!!!!!!!!!!! : easy to print with pla 1 hour to buid not complicated control command a big potential to test new wings hardware : 3S lipo 500 to 1000mah motor like…
Introducing a custom-designed 3D printable HDD caddy, model SM17A06246, precisely compatible with Lenovo ThinkSystem models ST250, ST550, SR550, SR650, and SR850. In my quest for an additional HDD caddy, I realized the scarcity of readily…
My sons wanted a case too I tweaked my other case model make this simple case for a Samsung Galaxy A03s Phone. It has corner bumpers and fits quite well. It isn't the prettiest thing on earth, so feel free to remix some decoration onto…
Sidepanels for the CPU and GPU Side of the 4.4 Litre ITX Case from Aliexpress called A07. The CPU Fan used for this (so it fits) Thermalright AXP-90 X36 Black Low Profile CPU Cooler GPU Fan: Thermalright C12015B 120mm Slim Fan with an…
Overview This printable modification is an extended front panel designed specifically for the popular A07 Mini-ITX PC case . By adding 10mm of depth to the front of the chassis, this panel provides the necessary clearance to accommodate…
Lense Hood for Tamron A005 70-300mm (62 mm). Hood may be mounted in normal position for use, or in reverse position for storage. Has detents which click on the small bumps in the lense's hood mounting tracks. I no longer have an original…
Gdemu 5.20 mounting bracket for VA0 Mainboard
Designed and printed some custom panels and fan mounts for the A07 to help with thermals and aesthetics used ABS, petg would also work (pla would probably warp or melt) used some generic 80x10mm fans I found on Amazon…
I designed an almost identical spare wheel for the rear of my Makita cordless lawn mower - more stable than the original because the soft struts are no longer needed! The original hubcap can still be used. A further improvement in driving…
Phone case for Samsung Galaxy A03 with a Naruto style
This Awesome PDO was created by Monkeyfuj and very kindly provided by Sierra086 and the boys at the 405th http://www.thingiverse.com/SIERRA086/about Please check out Sierra086 brilliant work on this helmet done the good old fassioned way…
https://makerscontracovid.net.br/ This prototype was made to fit the requirements made by the team from HC in São Paulo after the Makers Contra a Covid-19 shows RC2, RC3 and Brasil V2 to them. We remix RC3 to cover the face, 5 cm more of…
This beefed up version of the front bearing hubs preserves the original wheel bearing fitment diameters but beefs up the screw locations. It uses M4's for each location. The other beefed up version used a M3 at the steering link which I…
Evangelion 01 from Neon Genesis Evangelion Instructions This unit is 100mm high Category: Robotics
Mercedes Benz C124 Door Panel Clip. Pictures have 3D printed and broken original in comparison. Might not be perfect. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes Infill: 100% Category:…
Here is a replacement part for any microwave that has a standard Ø 180 mm 5889W1A012A turntable. It's commonly used in budget devices. All you'll need is a T10-T20 torx screwdriver for the assembly. Tip : print the sample test first to…
Printed in PETG Layer 0.2 mm Infill 20% 3 Perimeters
I saw a shim like this with the Tildagon project but it had nothing to hold it in place - I think it was supposed to be paired with a top cover for the screen, which I don't want. So I've designed this similar one which has two small…
Fan model: Delta BFB1012SHA01 Screws: M2x6 11 pcs. M3x16 3 pcs. I also added a model in STEP format.
This fits Redit User VykkuF replacement cover (shared with permission) https://cad.onshape.com/documents/621cd0e291925d80f9f11098/w/256af39dc487ebcffbda78e0/e/bc10719f7a26fb2e1b503295?renderMode=0&uiState=6a104f437494deeb2d455f77 redit…
Replacement for Meccano Junior Plastic triangle screwdriver (model A090) for tightening both A051 (J0051) and A054 (J0054) bolts. Fit is purposely a bit loose to allow you (or your kids) a slight angle while tightening, however there is…
Replaces ceiling vents in VW Vanagon and Synchro vans, made to same dimensions as original vents. Materials Printed components and original mounting screws Assembly Align the Vent flaps and attach them to the linkage plate, putting the…
Adapter for Triton TRA001 to a 43mm suction hose. (Miele) (Left handed thread!)
Round Screen GC9A01 for Displaying Temperature. Category: Electronics
Dust extraction adapter for Triton TRA001 to C35
Brake pad spacer for Shimano brakes. Should work with all model using A01S/M06 pads. To be sure not push out pistons with wheel out during transport, washing ... No so detailed as http://www.thingiverse.com/thing:855454 but will do the…
This suits the Blyss A018I-12CH but may fit other models with a 150mm exhaust. I wanted to move my air conditioner from the office to the bedroom for sleeping and didn't want the hassle of moving the hose so I purchased an extra hose and…
Originally published here: Samsung Galaxy A01 a015 case by tato_713 - Thingiverse Thanks to Victor Bernal who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models…
Our Acura RDX center console latch snapped (Part number: 83417TX4A01) and after seeing the Amazon replacement would be $15 ( listing ) I thought it would be a great opportunity to try CAD modeling 🎉 30 minutes and $0.30 of PLA later and…
A snap-fit Samsung A05 phone case to protect the phone exterior. It is recommended to print the case on the back face. However, depending on the print setting used, the underside radius form (shape) nearest the print bed may need some…
Mount for the DFRobot A02YYUW sensor, used STEP file from Henric Heimdal to design the mount in Fusion 360 Nuts and screws for the sensor is M3 Hole on the other side is M12 for mounting in a water tank
I modified front wheel mounts for tarmo 5 to fit my smaller inside diameter tiers
This is a replacement part for the Astro A50 Gen4 (A00085) for the right side mount that connects the headband to the headphone slider arm. This model is slightly different from the original mount. It is slightly thicker at the bottom…
This is a wiper arm nut cap for toyota models using the part number 85292-AA010. Clicks in place, fit is good and saves you like a dollar. This cap was used on a bunch of toyota models from the 2000s and i think still today on newer…
. Print Settings Printer: JGaurora A5 Rafts: No Supports: No Resolution: 0.32 Filament: Generic PLA / PETG Notes: Design for a 0.6mm noozle Category: Replacement Parts
I work at a school and although I can't stop students from breaking the keyboard feet, I and at least replace them now. I modeled it with a tiny bit more tolerance than the original. It was tight to put in, but once in it feels great and…
Model A01 is a compact, single-peg action figure base stand designed to support figures with one foot peg hole. This stand is ideal for collectors who want a clean, minimal solution for stable displays without bulky bases. Compatible with…
I've not been able to buy a second A02 Joint ring for my Makita blower even though it's listed as a spare part and has a code. I've recently got a printer and thought I'd have a go at drawing and printing one. Pretty happy with how it's…
This is a replacement handle for a Kenmore microwave. The part number is 3650W1A075H but it's been discontinued. I've included the .stl file for the handle and also a base to which the handle can be attached for sanding painting. The base…
Dummy model of TFT display: GC9A01, exact manufacter or part number is unknow. Tinkercad model I bought it from Alexpress
SUN SHIELD
EMOtto Diy EMOtto, emette suoni e si muove cambiando espressione a seconda dell'emozione , che si cambia sfiorando la testolina. Dopo un po' che non lo tocchi si addormenta . Ma basta sfiorarlo e si Risveglia ! Emozioni Incluse: Felice…
This is a replacement foot/feet/leg for ASUS ROG STRIX FLARE XA01 keyboard. All features of the original part are preserved. The length of the part has been reduced by 0.5 mm to make it possible to cover it with fabric tape. Printed with…
By adding 2 female 4mm diameter fastons you can create replacement of original connector.
A minor remix of the great LA-EA0 from Vincentpartman . Changes: I've added a few more light seals to the design The E-mount is joined directly to the barrel to use less screws Lens release is a simple screw. Rationale being as this…
Model SAVFX A03 is a large-format action figure base stand featuring two peg supports, designed for maximum stability and pose flexibility. With a base size of 71mm x 35mm, this stand allows collectors to display figures in dynamic, wide,…
This design is based upon the ‘VALVE ROCKER HOLDER’ tool shown in the factory service manual. Just like the factory tool, this snaps onto the upper support rail and holds the rockers in their normal orientation during disassembly.
In making the Nevermore Mini I wanted to use the full nevermore controller over bluetooth The Nevermore Mini project on Github and Printables has a screen holder for the Pi Pico 1.28" so I remixed it to support the generic GC9A01 screen…
The WIFI module installation is designed based on this WIFI board. https://github.com/OpenIPC/hardware/tree/master/WIFI-BOARD The fan is 25mm square. To fix the board, weld the pins with a soldering iron.
Hello, I got my hands on this amazing phone and so I created a copy of it for you to create cases or other games or just for the exhibition. The model is a faithful copy in 1:1 scale. In my collection there are also other variations aimed…
Triton TRA001 to 36mm Adapter (Bosch Power Tool Hose Adapter)
This is a common failure point on the Audi A8 D2. I tried to model this battery terminal assembly 1 to 1 but it could be adjusted to make it easier to print and build a new one. This should a be a great start to modify the design however…
I modified the Tarmo5 Front Bearing Hub parts A05 and A06 so that they won't hit the wheel base on tires that have smaller rims. Without this mod they wheel itself would interfere with the Front Bearing Hub.
Was too cheap/lazy to find and buy a proper tool Compatible with the Columbia CA025 E15 Watch and possibly others It just prints with no supports and almost any infill and at least 2 shells
Designed for M6 bolts. Onshape model: https://cad.onshape.com/documents/eec8cd0664e40d9f981a8414/w/09867137a42a700818521c0d/e/17925b3aba99789cefa20b44
A0029880181 Clip für den Daimer, gedruckt in PETG oder PLA, ca 15 min.
Para el enclousure a mi Ender 3 S1 tuve que hacer esta herramienta para los cortes del Perfil de Alumiunio y diseñe la union esquinera.
Front gear cover for Tamiya TA01 TA02 DF01 Chassis Tested quite thoroughly in a Top force evo to ensure it fits properly flush with the front gear housing, bearings will sit into place and that there is no interference with the gears. The…
There are Two parts to print ; 1. The back cover (I printed in several parts then glued) 2. The hose connection, here I choose to make the same design than the orgininal, but you could design what you prefere (I glued it too). The device…
A custom 3D-printed ventilated side panel designed specifically for the SKTC A07 4.3L Mini-ITX case. This panel increases fresh airflow directly to the GPU and CPU cooler to help solve thermal throttling and keep operating temperatures…
F3K Servobrett für KST A08H Servos, es wurde extra für die Maat entworfen passt aber bestimmt in andere F3K Modelle ;). F3K servomount for KST A08H servos, it was specially designed for the Maat but will certainly fit other F3K models ;).…
NA01-51-033 Replacement headlight ring cause I lost one of mine. Walls are much thicker than the original but it works!! (0.5mm to 2mm). I have not tested this long term so if your headlight decides to run away I take no absolutely no…
Hier mein Modell für ein Tankgummi für die Suzuki GS500 e. Wird mit TPU, 10 Infill, 3 Außenlinien gedruckt. 0.28mm Layerhöhe und 0.2mm Düse. Erfüllt seinen Zweck sehr gut.
Hi, I created this case cutter to make it easy for each of us to create something unique for this phone. Keep an open mind
Replacement motor mount for my vintage TA02 after it broke from the two screw holes, use the uploaded picture as a reference to the motor clock for different pinion sizes Print Settings Printer Brand: Creality Printer: Ender-3 V3 KE…
A single-slot cooling solution for the LSI SAS9300-8e HBA by attaching a Delta BSB0512LAA01 blower fan that's readily available on AliExpress and other online platforms. Friction fit. Inspired by LSI SAS9300-8e blower fan bracket . Use a…
This part should also fit for other Suzuki models such as the Jimny and possibly Wagon R+ related cars (i.e. Vauxhaull/Opel Agila) of the same era. For any broken off flap mount points, one can use small screws of similar diameter, set…
Streamed the design of this guy a while ago. Included is a rough model of the original part, and my new reinforced one. Have fun!
Direct replacement Fan, PSU and Top Side Panels, with higher airflow hexagonal vent, for the SKTC A02 computer case. Same OEM fan position and 3mm plate thickness. Extended PSU side vent now reaches the Flex-ATX PSU intake fan. The SKTC…
The original model is split into 2 parts. They will now print with much less supports and time. Additionally, the parts will look better because of the orientation of the parts on the print bed. The 2 parts self align and held on with…
Nothing clever to add here that wasn't clarified in the summary. Pretty straightforward part to be honest, definitely not tens of hours of work and 50+ features.
This nozzle combines bostwickenator's Makita Blower nozzle base with my parametric 9mm nozzle that fits larger floaties like Intex etc. The standard nozzle that comes with Makita is 7mm and mostly works with small inflatable toys. My…
If you order spools from AlieExpress or Temu you get a lot of spools. Ik recieved 16 and 4 new caps. In order to store them in a neat way i designed this holder. You can use it standing or mount it to the wall holes included. The caps can…
¡Ya puedes olvidarte de las purgas! ¡Tus máquinas ahora van a limpiar solas! La BC-A01 eliminará las purgas de todas tus impresoras de tu zona de trabajo de manera fiable, efectiva y, lo más importante, de manera silenciosa… Tener 2 o más…
Three part transport case for a modified Orlandoo Hunter A01 (Jeep) 1:35 Scale RC Crawler. The FJ Cruiser die cast body is slighting smaller and this case is tuned for this build. Case may need modification to fit the Jeep body, tire…
Must print two to properly mount to surface, use screws to screw through mount and into the wall.
Support accu Tamiya TA05 pour châssis carbone 3Racing. 4 vis de 8x3 mm. 4 vis 22x3 mm. Category: R/C Vehicles
This chassis was built to mount squared LiPo batteries with maximum dimensions of 47(W) × 27(H) × 135(L) mm. The chassis turned out lighter than the original, surprisingly. The battery holder is mounted to the main chassis using 4 × M3 ×…
This is a 3D-printable tool to loosen and tighten the OEM oil cap on a Honda S2000. The part number this works with is 15610-PCX-A01. It's easy to overtighten the oil cap and crack it in the valve cover. Do not crank on it with this tool!…
A small holding clip that uses the GPIO outlet of the Akasa A-RA03-M1B Raspberry Pi case to mount it to a Prusa MK3 or MK3S. Links to buy the Akasa A-RA03-M1B : Amazon UK Amazon US Amazon DE Find more on DuckDuckGo This part merges the…
Case for the 7 inch LCD HSD070PWW1-A00.
Holder designed to hold the Homematic IP Thermostat in an 20° angle. Print it in PLA oder PETG and use two M3 screws to attach it to the backplate. No supports needed. Print Settings Printer Brand: Creality Printer: CR-X Rafts: No…