103 models
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Kids Workspace - Screwboard for Desk and Wall Designed for the next Maker Generation! 👦👧 A very nice toy for child's where they could practice to use different tools for different screws. Use the included mount for the wall, you can…
The Polestar 2 Activity Key is designed to be disposable. However, if you do not want to throw it away and buy a replacement when the sealed battery runs out (~2 years), it is possible to extract the key electronics, replace the battery…
Použití např. na domácí activity board pro vaše dítě
Ender 3, V2, S1/S1 Pro Sprite Extruder Activity Like other models I printed this in ABS, which shrinks a little for a snug fit, If printing in PLA or perhaps PETG you may want to print at 98%
Printable activity board parts which I created for my kids to play with. Printed by PETG, 10% infil, easy job. Works well and kids enjoy it. For securing parts to the base board, use screw M3x15mm. Thx hollac
A tiny scaled model of the Little Tikes Jr Activity Gym! All credit to them but I wanted a tiny one for my desktop. Print Settings: .1 mm to .2 mm layer height 100% infill since the parts are so thin Print 2x of the side piece Assembly…
This is my design for a minimalistic and clean 16 x 16 led matrix display with sound reactivity. It is designed to stand or to be hanged to a wall. BOM: printed parts 16x16 WS2812B RGB Digital LED Panel Flexible e.g.…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … A radioactivity symbol for the extruder motor visualizer on…
Starting from today, XingHai icreatori will be updated again. Thank you for your attention and liking.
The battery in my key was dying, so rather than buying a new key, I cut open the shell and replaced the battery. I didn't really want to glue back together the original mangle shell, so I modeled a version that snaps closed. It's no…
A maze for the activity board not only for children, but also for the elderly for coordination training. The maze composts from two part (bludisko-part1 and bludisko-part2) and runner is called "bludic". Diameter for srew is 2 mm with…
Parents and pre-schools will welcome this replacement part. If you have activity tables from brand Step2 (Little Tykes) and have lost the little car bridge parts over time, this print gives you a way to make your activity table as good as…
🇬🇧🇺🇸 Update — July 29, 2026: Added STEP files of backplate and fan holder Update — May 14, 2026: Added a new backplate variant for 2 mm LEDs. I used these LEDs: https://www.aliexpress.com/item/1005009162962843.html Measured dimensions of…
Print the bottom part with flex, top part with PLA
Zámek a klíč. Tři druhy. Vhodné pro activity board. Lock and key. Three types. Suitable for activity board.
Gear set for activity board children play craft part. You have to get some screws to lock them in place. You can place the gears like you want. Just keep the distances in mind. Really fun for little kids.
The snack roll activity game turns meal times into fun play times. By randomly dispensing treats during play it provides your dog with mental and physical stimulation. 📌 roll about and treats fall out 📌 can be used as a treat dispenser or…
Just add few screws and chain or rope and you have working slidelock. You can have it just like that or mount on some small door / window to train the skill. From expirience, you can change the difficulty by adjusting length of chain. But…
Replacement gear(s) to fit with Lakeshore Engineer-A-Coaster Activity (available for purchase at: https://www.lakeshorelearning.com/products/stem/building-engineering/engineer-a-coaster-activity-kit/p/LL570/ ) Print the size you need.…
I use this for my activity board for my toddler, of all the things that hang on the board, this is the most popular.
Easy to print Montessori style puzzle for young kids.
Sand clock for activity board children play craft part. You have to get some clear foil or pvc and glue it on the sand clock. In addition get yourself some fine sand and fill it in. Really fun for little kids.
My friend lost a few of the nuts to assemble the Little Tikes Activity Garden and asked me to design and print a few replacements. I was able to get a pretty close recreation. The threads are a little loose in my opinion, but that seems…
The purpose of these beads is to visualize your running or walking activity. For each run/walk you can print a parametrized bead. It visualizes three parameters: Running or walking duration : Bead diameter Running or walking distance :…
The rocket is propelled high into the air with a moderate foot stomp on the cylinder which forces high-pressure air into the launch tube and rocket. This should be used only by adults, as the rocket flies hard and fast. You need to keep…
This is a multi-purpose bath bucket. It has 4 different curved edges to match different sizes of infants' heads (R50, R60, R70, R80) which helps rinse shampoo from their hair without getting water in their eyes. For older children, it has…
The idea behind this tool is to inspire some weird character designs based on simple shapes. It's great for helping with art block or as an art exercise. Designing with limited tools is a lot of fun and makes me think of things I wouldn't…
Summary continued This activity picks up where Transcription leaves off. We will assume that RNA polymerase has already created the mRNA transcript and the mRNA has been processed (addition of the 5’ cap, polyA tail and removal of…
Ender 3, V2, S1/S1 Pro Sprite Extruder Activity Like other models I printed this in ABS, which shrinks a little for a snug fit, If printing in PLA or perhaps PETG you may want to print at 98%
Using the paper plane gun designed by "Thisfact" this STEM activity was created. The designed base enables students to scientifically test different paper plane designs by ensuring power, launch angle and height are the same. Students…
Snap-on cover for 40mm Apple Watch for protection during activity. I wanted a part to protect my Apple Watch from scratches and damage during rock climbing, but so I could continue to keep it on my wrist to measure my activity. This…
Ender 3, V2, S1/S1 Pro Sprite Extruder Activity Like other models I printed this in ABS, which shrinks a little for a snug fit, If printing in PLA or perhaps PETG you may want to print at 98% If you don't like the logo flipped just mirror…
The idea is they work like a mini jig to hold the badge where you want it as you work your way around sewing it on. Makes it a fair bit easier. I'm going to make a full set for all the different sizes and shapes. They clamp the material…
Gear wheel for activity board children Choose from 30mm, 40mm and 50mm sizes You can fix the Gear whell with a holder and a screw on the wall. Really fun for little kids. Don't forget to give me a like
This is ideal thing for activity board that your baby can play with during tummy time. It has bright colours and moves quite fast because of really big pitch. The screw is two way, that means that you can use either left or right nut.…
Kids love pushing buttons! So I designed a button box that keeps young kids both entertained and improves their fine motor skills and dexterity. The STL has no text so you can emboss or deboss whatever text you like using your slicer of…
Original FreeCAD file included.
This is my take on a black box activity for my 7th grade science classes. Black box activities are a good way to teach students the science process skills (nature of science) and modelling in science. For my class I have split the…
Signs for recreational activity areas.
This is an atomic bonding activity that I created with the help of my students. This activity works great at the middle school level to introduce the concept of atomic bond formation. We made a series of metals and nonmetals and cut out…
I designed this a couple months ago so my daughter could have an activity tray that attached easily to her wheelchair arms. It uses a dozen 60 x 10 x 3 mm Neodymium bar magnets and a 12" x 16" food service tray. We don't use it a lot at…
One of my best friends works as an Occupational Therapist in our local school system's special education unit. One day she was sharing about how she experienced a breakthrough when a nonverbal autistic child was given a set of wooden…
Replacement for dog toy Trixie Dog Activity Flip Board Strategy Game print with 100% infil or your dog will crush it easily. Printed with PETG.
Weather map symbols for a weather map activity for middle school physical science & meteorology class. Blue: Cold front, high pressure Red: Warm front, low pressure Purple: Occluded front Orange: Dry Line Red to Blue: Stationary front
This is a holding system for Lego Activity Board. With it you can attach the Lego Activity Board to the crib.
Habe für meine Tochter ein Activity Board gebraut und diese Klötze modelliert um sie als Befestigung für die Kugeln zu nutzen.
A multi-material print of a fire extinguisher sign. Check out my other signs: First Aid Sign https://www.printables.com/model/1160946-first-aid-sign Fire Extinguisher Sign https://www.printables.com/model/1160926-fire-extinguisher-sign
Trixie Dog Activity pieza https://www.youtube.com/watch?v=HVd00aKv2Bc&list=PLumL7Mkm89_AUndfllGtjcwtyTuruqK8y&index=8 Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 2 Infill: 50 Filament: Smartfil Pla…
2 variants of CAL Tracker Die for FoF . It makes tracking the activity level much easier, and into fits to the Cube4me organizers (LAT box) Version is a basic die with four sides with a ctivity level. Version got notes of VOF for each a…
This housing clips into the openings on the bottom of the faceplate. I had to remove the faceplate for the install to be able to push the wires through from the inside of the Xbox. No glue required, just push 3mm LEDs into the part, then…
Print on side with organic supports.
A set of printable gears designed for children's activity boards (busy boards). Collection of wheels of different sizes.
3 unique beads may be used as charms
This cube has been designed with the purpose of teaching children to learn various activities in a playful and versatile manner. What sets it apart is that, in addition to being a toy, its sides are detachable thanks to the use of…
Prints well in standars modes. Made for m5 machinescrews. For a complete kit: 4x Small Domes 2x Big Domes 1x Base 1x Top
take the metal bottom out. Materials used 3x20 Printed in petg silk 3 perimiters and 25 % infill
Print with 0.25mm layers. After printing, secure the two sides of the cap with a bit of super glue. Use the “Cutting Dovetail” and Cura's Modify: Cutting mesh settting set to 0 walls, 0 top/bottom layers and 0 infill to remove the…
Needed a bunch of suspicious activity tokens for an encounter in Five Klicks From The Zone, so I made these fellows. If you haven't heard of Five Klicks From The Zone, it's made by the same team who made Five Parsecs From Home. If you…
Created the parametric model from scratch, inspired by the model linked in the “remix” section. The model fits the X-axis (and extruder probably too) motors of Prusa MINI+ nicely, by providing the cylinder of 8.8mm in diameter. I used two…
Jigsaw Puzzle Challenge (Orientation to Group Work Activity) This is another group activity I like to do with classes at the beginning of the year. I use this instead of the Circle Challenge in classes where a majority of students have…
This is a parametric cellphone cover that I created in 2018 and improved later. It's ideal to have your phone at hand and well protected while doing trailrunning, hiking, trekking and so on. Fusion 360 file is also included with…
If after this quite long lockdown you need to : do some empty spool cleaning do some sport Here is a tiny thing, that could help! With the PRUSA PADDLE RACKET, you'll recycle you prusa empty spool and do some sport exercice. Just see the…
My students and I created these files for a STEM boat-building challenge. Students first tested their boats to see how much weight they could hold. Next, we placed the boats in choppy waters. Finally, we hot-glued the mast attachments and…
I was tired of my Activity board that dictate the actions and created this dice that spice things up. Based on the dice you can have more flexible game rules, including infinite playing using only points, and calculate totals at the end…
treat dispenser and more pieces add on for the Trixie dog / cat activity board.
Celebrate your fitness streak with this Apple Fitness–inspired Weekly 7×7 Activity Badge , recreated as a 3D printable keychain . Designed to capture the iconic circular activity rings look, this model is perfect for fitness enthusiasts…
Radioactivity plate, resizeable, more componet for change colors on monofilament printer. 2 Base, rounded and rhombus
Print with 0.2-0.25mm layers. One top, one base, and 2 feet. After printing, secure the feet with a bit of super glue. Use the “Cutting Dovetail” and Cura's Modify: Cutting mesh settting set to 0 walls, 0 top/bottom layers and 0 infill to…
A simple block designed for a STEM activity in which students construct solar sails. It includes several structural hardpoints for mounting sail brackets and supports. We used a shop vacuum to propel these solar sails approximately 10…
This charming 3D printed activity board is designed to make early learning fun, colorful, and hands-on. It includes playful cloud pieces, basic shapes, and numbers from 1 to 4, helping children practice shape recognition, number learning,…
Easy-to-print tablet holder. Print without supports. Can also be used as a chalk box at the blackboard.
Print with 0.25mm layers. This is a print in place mechanism. Do not use support. May take some force to break the bottom portion free the first time, but after that, it slides freely. Use the “Cutting Dovetail” and Cura's Modify: Cutting…
A rotating holder to attach an oil ladder hourglass toy to an activity board or any other surface. That way the hourglass can't be flung by toddlers. Print the front face down. The hourglass is available from various sellers and…
This model is inspired by the popular Little Alchemy online game and apps, to propose a creative and educational pen-and-paper activity. In the description below I explain how I adapted it as an “educational trick” for my own daughter,…
This is a handy tool for your mouse. It makes sure your cursor doens't move while doing other tasks. I use this in my sim racing rig, so my mouse doesn't move while driving.
a dice that can tell you what to do when you are bored open it in blender to edit the text
When you have lost most of your sand carts, you will want to make more. These are not copies of the original, but are a remix of a more realistic mine cart, scaled down to fit on the Step 2 Fill and Dump table. Supports are a challenge…
100x160mm sign, to advise visitors about the negative entropic effects thy may experience in your shop. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in S hadowbox…
Made this so the elastic bands would stay in their holding slot better. Works pretty good. Have a 30mm long model and a 24mm model. Works with 5mm elastic cord.
Storage box compatible with LEGO® Recreate Activity Cards Stores exactly one game (cards and bricks). This model is an independent design and is not sponsored, authorized, or endorsed by the LEGO Group. Assembly instructions Gently screw…
A pair of big get-moving dice for kids' parties, rainy days, PE lessons and brain breaks: roll the action die (JUMP, SPIN, CLAP, HOP, STOMP, WIGGLE) and the number die to see how many times. Edit the words and numbers in the Customizer…
A set of four objects, useful for Physics classroom investigation into moments of inertia, to be used with the Vernier Rotary Motion Sensor [RMV-BTD] or the Pasco equivalent [CI-6538]. The set includes a cylindrical rod with multiple…
Radioactivity emblem optimized for 0,4 nozzle You can find the instructions and the base of the lid here:
One of the first activities I have my students do every year in science class is this Broken Circles activity from Stanford (I call mine the circle challenge). Instructions are included in the PDF documents, but I will give a brief…
Students fold and test each net to discover which ones work and which ones don't. This hands-on activity helps develop spatial reasoning and geometric thinking. This version is not the sturdiest in PLA. If the parts are moved in the break…
These are add-on feet for a Vertbaudet activity table, designed to be printed in TPU to significantly increase friction against the floor. The goal is to prevent the table from sliding away when a toddler leans on it, reducing the risk of…
I have added 3 holes to the model to allow three 6x3 mm neodymium magnets to be glued in, this will help clamp the badge to the uniform and make it easier for them to sew it on. Trialled and Tested by all of 1st Acle Scouts Please respect…
I wanted to show HDD activity on a retro build that has a PCI SATA card, but there was no easy way to tap activity off the SATA card i used. I instead found an adapter that has an activity LED, but I realized it was inverted from how a…
Background For the Halloween event at my local Children's Discovery Museum, we wanted to do something in the the science room. We decided to do a potion mixing activity (baking soda + vinegar + food coloring + dish soap). To make it more…
Thanksgiving Turkey coloring plate Color your own Thanksgiving turkey! This cute turkey coloring plate is a perfect Thanksgiving activity for kids. They can fill it with bright feathers, a silly face, and colorful feet using markers — and…
Choose the number of stars you require and print. You'll end up with the front, back and a number of half-tokens. Print off the equivalent number of other token-halves using a different colour and glue both halves together. The front and…
Thanksgiving Leaf Collecting Turkey Turn a nature walk into a hands-on Thanksgiving activity! Kids collect real autumn leaves and slide them into the turkey’s holes to build its colorful tail feathers. A simple, screen-free…
Wir benötigten für das Activityboard noch etwas um ein paar Holzblöcke zu halten.
My students and I created these files for a STEM boat-building challenge. Students first tested their boats to see how much weight they could hold. Next, we placed the boats in choppy waters. Finally, we hot-glued the mast attachments and…
These are add-on feet for a Vertbaudet activity table, designed to be printed in TPU to significantly increase friction against the floor. The goal is to prevent the table from sliding away when a toddler leans on it, reducing the risk of…
Kids love pushing buttons! So I designed a button box that keeps young kids both entertained and improves their fine motor skills and dexterity. The STL has no text so you can emboss or deboss whatever text you like using your slicer of…
