Search results: ahead

Sort order

76 models

Star Trek TNG 'Cobrahead' Phaser

***NEW v3 updated model with better shape available here: https://www.printables.com/model/1490289-star-trek-tng-cobrahead-phaser-v3 Here is my improved version of the cobrahead phaser published on thingiverse. I wasn't happy with my…

Downloads
2,932
Likes
701
Rating
5

Star Trek: TNG 'Cobrahead' Phaser v3

Here's a better attempt to get the cobra head right. The v2 had something off about it and I wanted to make it look better. Rounder edges, wider grip, and thicker body I feel brings it closer to the prop's shape. Not too much of an…

Downloads
541
Likes
86
Rating
5
P

Subtle Patterned Vase | Warning: VFA's Ahead

This is a unique, subtle patterned vase that will most likely show your printer's VFA's, or Vertical Fine Artifacts. I used standard vase mode settings on two different printers to create the models pictured. The red golden vase was…

Downloads
333
Likes
80
Rating
5
P
Printablesahead_RC

ahead RC Fuel Cell Tank

This original and highly detailed 1/10 scale fuel cell tank comes in 4 versions (myminifactory and Cults3D versions only). Logo and non logo. As well as a 1 piece or 2 piece print for each of the versions. It is also part of the “Special…

Downloads
323
Likes
45
Rating
0
P
PrintablesCrazyTim

Bicycle Ahead Caps

Lightweight Ahead Caps for 1 1/8" Stem. Additionally required materials: Standard M6 cylinder screw Note for "Ahead Cap Maze V4": The labyrinth comes from here: https://www.mazegenerator.net/

Downloads
297
Likes
50
Rating
5

Caution Unsupervised Engineer Ahead

I always joke about never leaving an engineer unsupervised so I figured I would make a fun little sign to warn visitors to proceed with caution when there is an unsupervised engineer. I think every office should have one of these. Hope…

Downloads
274
Likes
142
Rating
5
P
PrintablesRobbycor

More Zerup Sirup, Ahead Sirup und Inlead, Universal Halter für die Sirup Flaschen

Universal Halter für die More Zerup Sirup, Ahead Sirup und Inlead Sirup Flaschen. Diese sind auf der Innenseite eines Küchenschrankes Angebracht. Über den Flaschen die im Schrank stehen. 1 Version für 8 Stück mit 2 Senklöcher für…

Downloads
169
Likes
10
Rating
5
P
PrintablesModel Magic

Terminator T-800 Series - T-800 Charging Ahead

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
169
Likes
33
Rating
5
P
PrintablesAndizzle

Co Print Chromahead Model

NOT 100% ACCURATE This is a rough model, but close enough to help when modeling parts for the head.

Downloads
167
Likes
8
Rating
0
P
PrintablesAndizzle

5015 Chromahead Fan Duct

PRINTING Use tree supports Use brim Use classic wall generator if holes in slicing Use .4 nozzle MOUNTING Needs at least one M3x20 and M3x8 screw and one M3 nut. Use existing screw in front of heatsink fan and next to extruder. Use M3x8…

Downloads
117
Likes
15
Rating
5
P
PrintablesAndizzle

Chromahead High Performance Fan Duct

PRINTING The model is already oriented as it prints. Will need a brim about 5 mm. Will need tree supports. You can exclude the supports inside the tips of the ducts. Works best with .4 nozzle and classic wall generator. Otherwise holes…

Downloads
116
Likes
13
Rating
0
P
Printablesfrause

Ender-3 V3 Plus X carriage for Coprint Chromahead

I thought there was room for improvement on the Creality/Coprint multicolor kit. The Chromahead mounted on the stock carriage sticks out quite far and in combination with the assymetric nozzle placement it reduces the print area from…

Downloads
112
Likes
25
Rating
5
P
PrintablesDunc toB

Go Ahead Eagles Deventer Logo

I made this logo for my sons "Eredivisie football club logo collection". Made in Tinkercad from a picture of the logo. Print Instructions Print in 0.2mm layers, and change color ever 5 layers.

Downloads
104
Likes
2
Rating
0
P
Printablesahead_RC

ahead RC Water Tank type 2

This original 1/10 scale water tank type 2 comes in 2 versions (myminifactory and Cults3D version only). Logo and non logo. It is also part of the “Overland” collection. These 2 versions are a 2 piece print, which includes the water tank…

Downloads
103
Likes
11
Rating
0
P
PrintablesKepler

1 1/8" (28,6mm) Ahead Headset Spacer (1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 50mm height)

Ahead Headset Spacers with varying heights, so you can choose exactly what you need and probably don't need to stack. Inner diameter is 28,7mm, resulting in a 0,1mm gap, so should be easy to push over the fork shaft. Outer diameter is…

Downloads
100
Likes
8
Rating
4.5
P
PrintablesKBartels

CoPrint 4 in 1 ChromaHead adapter for PC4-M6

This is a follow up to my previous 4 in 1 adapter for the CoPrint Chroma head. This one is threaded for PC4-M6 connectors. Great option is all you are going to use is 4 colors.

Downloads
90
Likes
24
Rating
5
P
PrintablesNusel

ChromaHead cable strain relief

Print in TPU laying flat. The sacrificial bridging will have to be cut away after printing EDIT: Added a second version to be printed out of non flexible. Just add two strands of FIlament (~80mm?) onto the top to create the desired…

Downloads
83
Likes
17
Rating
0
P
PrintablesTonyL

Dangerous mosquitoes ahead sign

A “dangerous mosquitoes ahead” sign I made back in summer of 2019 inspired from photos of the similar sign found on the internet. Model can be rough around the edges as I didn't know really what I was doing back then (I still don't know…

Downloads
78
Likes
23
Rating
5
P
PrintablesLANPartyCEO

CoPrint ChromaHead Vortex/Toroidal/360 Cooling Duct

Circular Ring Cooling setup. Designed to fit both the Stock and Ceramic Ring Hotend. Centered around the nozzle tip. Uses stock fan. Screws: 1x Short M3 screw (8-10mm up to 20mm) 3x M3x20mm 1x M3x25mm Installation: Installed by mounting…

Downloads
72
Likes
10
Rating
0
P
PrintablesRob C

Co Print ChromaHead , ChromaPad , KCM , ECM Models ( coprint )

Co Print ChromaHead, ChromaPad, KCM and ECM provided from the Co Print github https://github.com/coprint/Series-II-Product-Models Why upload them? well I was looking for a model of the ChromaHead, ECM, KCM and CX-1 Extruder to allow for…

Downloads
70
Likes
7
Rating
0
P
PrintablesCryostatic

CoPrint ChromaHead - Improved Adapter for Ender 5 Max

This remixed model is used to attach CoPrint's ChromaHead to the Creality Ender-5 Max, and solves issues I had with the print head coming loose with the original model. Shown printed in Flashforge PETG-CF Recommend printing with PETG, but…

Downloads
68
Likes
11
Rating
0
P
PrintablesKBartels

COPRINT CHROMAHEAD COOLING RING 5015 FAN V2

This is the corrected version of the original. The ring inner diameter was too tight, and it was causing it to melt. Increased clearance around the nozzle to prevent the ring from getting too hot and melting. The original CoPrint cover…

Downloads
62
Likes
8
Rating
5
P
Printablessuper_perf

Go Ahead - Blame The Network Keychain

Small 3D Keychain. Print with layer Change to create cool Contrast by changing the color

Downloads
62
Likes
13
Rating
0
P
PrintablesAndizzle

CoPrint Chromahead to Neptune 3 Series Adapter

Align the 3 holes, use screws from the original hotend to mount to bracket, put square nuts in and screw Chromahead to them

Downloads
58
Likes
9
Rating
0
P
Printables3DPrintDude

CoPrint Chromahead modified Adapter K1

This adapter enables the Creality K1 to work with the Co-Print Chromahead. It’s easy to install and enhances multi-material printing.

Downloads
57
Likes
9
Rating
0
P
PrintablesKBartels

COPRINT CHROMAHEAD COOLING RING SV08 V2

I MESSED UP ON THE V1 OF THIS. I HAD MY NOZZLE IN THE WRONG POSITION ON THE MODEL. IT CREATED A HOT SPOT AND MELTED THE RING (SEE PIC). THIS IS AN UPDATED VERSION WITH A SLIGHTLY LARGER RING AND MY NOZZLE ORIENTED IN THE CORRECT POSITION.…

Downloads
52
Likes
9
Rating
0
P
PrintablesKBartels

CoPrint 4 in 1 ChromaHead adapter for PC4-M10

This is a follow up to my follow up of the original adapter for the CoPrint ChromaHead. If you are only going to use 4 colors, get rid of the heavy 8 in 1 and opt for the lighter 4 in 1 option. Now available in M10 threads.

Downloads
51
Likes
7
Rating
0
P
PrintablesKBartels

CoPrint ChromaHead 4 in 1

I don't have plans right now to go beyond 4 colors, so designed a 4 in 1 to replace the 8 in 1 and get rid some wasted space and weight. Printed in PLA. Slotted the front screw hole to allow for adjustment of head to be parallel with…

Downloads
50
Likes
12
Rating
0
P
PrintablesAlchemik

Ender 5 mount for CoPrint ChromaHead

This model makes it possible to install ChromaHead on the Ender 5. Can be printed using PETG or PLA.

Downloads
49
Likes
3
Rating
5
P
PrintablesNusel

CoPrint Chromahead 5015 mini shroud

Another attempt to fit a 5015 radial fan to the CoPrint head. This improves cooling performance significantly and while also being extremely compact. I have a TwoTrees SK1 in which I struggle to maximize the building volume. Mounts to…

Downloads
48
Likes
5
Rating
5
P
Printablesczrtst

Bosch Ebike Kiox ahead stem cover

I changed my Kiox E-Bike computer to an Nyon 2021 with a new mount. The ahead stem with integrated Kiox mount of my KTM Bike was unused and had no nice looking when the Kiox is not inserted. So i made a cover that fits perfectly into the…

Downloads
47
Likes
3
Rating
3
P
PrintablesCryostatic

CoPrint ChromaHead Cable Support / Strain Relief

I needed something supportive to hold the cable up and out of the way of moving parts on my Ender 5 Max, as it was catching on things. Prints in two or three parts as desired, and uses three strands of 1.75mm filament to connect them…

Downloads
40
Likes
11
Rating
0
P
PrintablesWillelmo

Ender-3 V3 Plus and non-Plus - X axis carriage for Coprint Chromahead with near full brass inserters

I liked the original project and I thank its original creator for this. What this stl gives: 1) Weight reduction: Original carriage weight following the CoPrint tutorial: 169 g This carriage weight: 120g 2) Build plate area back to…

Downloads
38
Likes
7
Rating
0
P
Printablesdr.dentz

Canyon Spectral 2022 Round Ahead Base for Thule Yelpp

I wanted to mount the Thule Yelpp Mini Kids seat on my MTB, but the new Canyon Spectral G5 headset has a weird shape, and if you mount it directly to the fork stem it-self there is a collission with the seat and the cockpit itself.…

Downloads
38
Likes
1
Rating
0
P
PrintablesBen81

Bike ahead stem spacer BMC MSM to Ergotec Sepia 50 XL

I didn't like the usual cylindric spacers. BMC is using special spacers for their stems, but on my bike I use a stem from Ergotec. So I made a custom one to fit both forms. The bottom part adapts to BMC MSM “topcone”, the top part adapts…

Downloads
37
Likes
0
Rating
0
P
PrintablesAndizzle

CoPrint Chromahead to Neptune 3 + BTT Eddy Mount

Should be printed with at least PETG Place in the square nuts Plug in cable to Eddy, route the cable in mount, mount the Eddy with shorter screws provided Screw the cable holder at the top of the mount Place mount onto bracket lining up…

Downloads
32
Likes
10
Rating
0
P
PrintablesAndizzle
Downloads
30
Likes
10
Rating
0

MTB Action Cam Mount — Ahead Cap & Spacer for GoPro / Action Cameras (1 1/8")

Your GoPro Belongs on the Trail — Not in Your Pocket! Forget expensive adapters and wobbly clamps. This 3D printed action cam mount replaces your standard ahead cap on the stem, giving you a stable, perfectly centered camera position —…

Downloads
28
Likes
4
Rating
0
P
PrintablesHenry Levesque

Scale Left Turn Ahead Sign

A 1:48 Scale Warning Sign

Downloads
26
Likes
3
Rating
0
P
Printablescastiglion1

Top Cover/Spacer Aheadset

Top Cover/Spacer Aheadset, you can use openscad to open the .scad file to modify the measures of this model.

Downloads
26
Likes
2
Rating
0
P
PrintablesJJEX

ChromaHead Ender-3 V3 carriage slightly rounded back

See original model for instructions. Nothing changes. If you do any other changes from the original model, like trying to take it slightly further away from the x-axis linear rods (thicker “Head connector.stl” for instance), make sure the…

Downloads
25
Likes
2
Rating
0
P
PrintablesT3D.tisk
Downloads
25
Likes
4
Rating
0
P
PrintablesHenry Levesque

Scale Cross Road Ahead Sign

A 1:48 Scale Warning Sign

Downloads
24
Likes
6
Rating
0
P
PrintablesHenry Levesque

Scale Left Curve Ahead Sign

A 1:48 Scale Warning Sign

Downloads
23
Likes
3
Rating
0
P
PrintablesHenry Levesque

Scale Right Turn Ahead Sign

A 1:48 Scale Warning Sign

Downloads
22
Likes
5
Rating
0
P
PrintablesHenry Levesque

Scale Right Curve Ahead Sign

A 1:48 Scale Warning Sign

Downloads
21
Likes
4
Rating
0
P
Printables3D Labs

Always plan ahead joke! (V2)

You can print this on a single colored print. Just change the filament when the words start printing. You can also just color over the top. Print without supports.

Downloads
20
Likes
5
Rating
0
P
Printables3D Labs

Always plan ahead joke!

You can print this on a single color printer. Change the filament at layer 10. You can also print in only one color then paint the top. Check out v2 here https://www.printables.com/model/1096719-always-plan-ahead-joke-v2 Look at my…

Downloads
18
Likes
2
Rating
0
P
PrintablesAsia_K
Downloads
18
Likes
7
Rating
0
P
PrintablesHenry Levesque

Scale Left Reverse Turn Ahead Sign

A 1:48 Scale Warning Sign

Downloads
17
Likes
2
Rating
0
P
PrintablesIDVert3X

Husqvarna 701 ahead GPS/phone mount

I designed this bracket to create a stiff AMPS mounting point on front of my Husqvarna 701's front mask, as bolting it directly onto the mask without this part resulted in a wobbly mess. It follows the countours of the mask nicely (what a…

Downloads
16
Likes
3
Rating
0
P
PrintablesHenry Levesque

Scale Right Reverse Turn Ahead Sign

A 1:48 Scale Warning Sign

Downloads
15
Likes
2
Rating
0
P
PrintablesRumbledoc

Star Nut / Ahead Nut Tool

Dieses Tool ermöglicht das einfache und gerade Einsetzen einer Ahead-Kralle (Star Nut) in den Gabelschaft deines Fahrrads. Das Design ist minimalistisch gehalten und dient als Führungshilfe, damit die Kralle beim Einschlagen nicht…

Downloads
14
Likes
0
Rating
0
P
PrintablesHolgiB

Bicycle Ahead Light mount

A simple single / dual light mount which goes in place for your average 1 1/8" Ahead spacer on modern bikes. There are several versions of this design including a rather expensive one you can buy. Simply melt a M5 or M6 threaded insert in…

Downloads
14
Likes
1
Rating
0
P
PrintablesPachyderm

The Road Ahead is Golden - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA ERYONE Matte Navy Blue Transmission Distance: 0.7 PLA JAYO Gray Transmission Distance: 2.5 PLA…

Downloads
12
Likes
1
Rating
0
P
Printablesdeadeyeflint

Cataclysm : Dark Days Ahead - 5x5 Macropad / Keyboard

In CDDA you really don't need a mouse, so I made a "CDDA-Replacement-Mouse" (keyboard / macropad) for the right hand. It is possible to flip the key assignment at kbfirmware.com for left handed use ;-) used hardware: arduino pro micro…

Downloads
10
Likes
2
Rating
0
P
PrintablesJaunjo

ChromaHead bracket for SV05

Adjusted the holes to match the existing SV05 bracket holes. You will also need some appropiate screws and nuts (M5 and M6, 40-45mm long) Note: For me to be able to properly use the whole bed for the printer, I ended up having to move the…

Downloads
9
Likes
0
Rating
0
P
PrintablesFrank Delporte

Stack mount for BeagleV-Fire and BeagleV-Ahead

I was looking for a clean solution to stack different single board computers. I found this existing design for Raspberry Pi's and adjusted it to hold a BeagleV-Fire or BeagleV-Ahead. Both boards have the screw holes at the same place.s…

Downloads
8
Likes
0
Rating
0
P
PrintablesThatGuy

Road Work Ahead Earring

road work ahead earring

Downloads
8
Likes
5
Rating
0
P
PrintablesMads T

"smart-phoning" ahead

The g-code is 3 color shift , start with WHITE then BLACK and last RED

Downloads
8
Likes
2
Rating
0
P
PrintablesModellaner

Ahead - USB-charger

This is a housing for the USB-connector which mounted to the Aheadtube in a bicycle. To use this you also have to etch and drill the circuit board from the picture in the right dimension. You will also need: Ahead expander like this one…

Downloads
6
Likes
3
Rating
0
P
Printablesthecivvie

Poopnami Zone Ahead sign

Daughter had her first baby recently so I designed this as a quick print. Pause at layer 11 and change filament. Added a version with a mounting hole pause at layer 16 as i made it thicker

Downloads
5
Likes
1
Rating
0
P
PrintablesSergey Ivanov

OneUP to AheadSet adapter.

Однажды я задумался о том, что с установкой OneUP EDC я потерял возможность использовать вещи, предназначенные для установки вместо крышки рулевой колонки. Например, крепления для велокомпьютеров, разные смешные крышечки и так далее.…

Downloads
5
Likes
0
Rating
0
P
PrintablesRTVofficial
Downloads
5
Likes
1
Rating
0
P
PrintablesModellaner

Ahead-Expander

Use it on your own risk! I made this to mount a USB-chager to the ahead tube on my bicycle. Notice the two cable ducts to feed-through more cabels. You'll allso need: M5 nut maybe a M5 inbus screw Category: Sport & Outdoors

Downloads
4
Likes
0
Rating
0
P
PrintablesUrkan San

PlanAhead Dust Collector

Just a small object with a message... I'm posting two types of "Plan Ahead" signs as a standalone object. I'm also adding a version with two objects for printing in two colors. As you can see from the attached image, it fits…

Downloads
3
Likes
0
Rating
0
P
PrintablesTVHS

High-Lift Z endstop for iMakr STARTT and TronXY XY-100 for Coprint / Chromahead

As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to move the Z endstop up by quite a large distance in order to accommodate the considerably larger Chromahead that…

Downloads
3
Likes
1
Rating
0
P
PrintablesTVHS

CoPrint Chromahead mount for Tronxy XY-100 (Also known as iMakr STARTT)

As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to mount the ChromaHead to the printer, and while I was redesigning the head mounting plate I took the opportunity…

Downloads
3
Likes
1
Rating
0
P
Printableshefrimu

stem adapter for 1-1/8" (Ø28.6mm) Ahead extension for fiido C21 bicycle

This is a special shaped part which covers the 1-1/8" stem extension (150mm) https://www.amazon.de/dp/B0GCZQ12FP?ref=ppx_pop_dt_b_product_details&th=1 and adapts its shape to the original spacers of the fiido C21 bicycle. I have shortened…

Downloads
3
Likes
0
Rating
0
P
PrintablesLayer Forge

Coffee Cup Sleeve Funny Quote Ahead on Chores

This decorative coffee cup sleeve is a flat band that wraps around a disposable paper cup, featuring torn, ragged paper-style edges and a humorous quote in bold navy sans-serif lettering. The text wraps around the cup, so it reads as a…

Downloads
2
Likes
0
Rating
0
P
PrintablesHolgiB

Ahead Lampenhalter v2

as ist eine Weiterentwicklung meines anderen Lampenhalters für einen Ahead Steuersatz in 1 1/8". Sollte also für die meisten modernen Fahrräder funktionieren. Die Montage des Scheinwerfers bzw des Scheinwerferhalters erfolgt mittels einer…

Downloads
1
Likes
2
Rating
0
P
Printables

Stack mount for BeagleV-Fire and BeagleV-Ahead

I was looking for a clean solution to stack different single board computers. I found this existing design for Raspberry Pi's and adjusted it to hold a BeagleV-Fire or BeagleV-Ahead. Both boards have the screw holes at the same place.s…

P
Printables

More Zerup Sirup, Ahead Sirup und Inlead, Universal Halter für die Sirup Flaschen

Universal Halter für die More Zerup Sirup, Ahead Sirup und Inlead Sirup Flaschen. Diese sind auf der Innenseite eines Küchenschrankes Angebracht. Über den Flaschen die im Schrank stehen. 1 Version für 8 Stück mit 2 Senklöcher für…

P
Printables

Ahead - USB-charger

This is a housing for the USB-connector which mounted to the Aheadtube in a bicycle. To use this you also have to etch and drill the circuit board from the picture in the right dimension. You will also need: Ahead expander like this one…

P
Printables

Star Nut / Ahead Nut Tool

Dieses Tool ermöglicht das einfache und gerade Einsetzen einer Ahead-Kralle (Star Nut) in den Gabelschaft deines Fahrrads. Das Design ist minimalistisch gehalten und dient als Führungshilfe, damit die Kralle beim Einschlagen nicht…