Sillybutts Alchemist Stand
Stand for Sillybutts Alchemist pump action blaster. Fits in Talon magazine loader.
- Downloads
- 55
- Likes
- 15
- Rating
- 0
279 models
Stand for Sillybutts Alchemist pump action blaster. Fits in Talon magazine loader.
Just a very simple tray to hold the FPGA dev boards from Alchitry . Fits the CU and AU boards. The board can be secured with four M2x5 screws. ! Warning this is for the V1 boards and has not been tested with the V2 boards V2: better…
Alchemist is the next step in the evolution of 3d printed pump action springers. Alchemist is built like a tank, has a butter smooth priming and firing feel, and is customizable with many alternative parts and upgrades! MAKE SURE to…
The Alchemist's Cube A combination lock box with mysterious appeal This puzzle box features 4 dials, each with 8 alchemic symbols. Line the correct symbols up to release the core, lifting the core out reveals a hidden compartment, perfect…
Hi Taki, hopefully this will help with yopur project. Please check the sizing although I think it should fit a young adult I cant be sure. Good Luck , Cheers Jace Please note this can be found freely obe at pepakura.com…
Print this helmet with 0% infill and 0 initial bottom layers(and maybe an extra shell or 2) to turn it into a wearable helmet. Requires a massive build volume to fit over my head. Remixed from https://www.thingiverse.com/thing:425292 to…
Es print in place no es necesario armarlo
This is an attempt of Edward's pocket watch design. Thank you for being indulgent, I am discovering Fusion 360 xD Printing with Smartfil filament. Print instructions Layer: 0.05mm Infill: 10% Support: yes
An articulated dachshund
A mighty owl-man chemist with natural stealth and night-vision. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on build plate only…
The rigged model is here too if you'd like to pose him differently :-) Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
My take on the Alchemical Golem uses trademarks and/or copyrights owned by Paizo Inc., used under Paizo's Community Use Policy ( paizo.com/communityuse ). I am expressly prohibited from charging you to use or access this content. My take…
A gnome alchemist with oversized round glasses, holding a bubbling potion bottle, hat shaped like a twisting flame.
I took this excellent model and remix the hinges (bigger with a plug to make it mobile). I've change the interior covers (to participate in a printing challenge), in one side I added a Sun clock, and in the other side a message Witten…
Modelo + llavero Calidad : 0.16 Paredes : 3 Relleno : 10 % Soporte : arbol Modelo original : https://www.thingiverse.com/thing:182122/files Modelo remasterizado. Las perforaciones en las patas es para evitar que se rompan.
Several scenarios of the Gloomhaven: Jaws of the Lion board game feature work benches with an alchemical laboratory flare. I created an alchemist bench for the game by editing and combining .STL files from a variety of sources on…
Storage box for the IKEA 365+ Lid Holder for the grid system made by Alex Chappel (https://www.alch.shop/).
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me here on Printables Clubs! Patrons…
This is a remix of The Quacks of Quedlinburg w/ The Herb Witches & The Alchemists Expansions - Insert by MordecaiHillsnipe . MAIN FEATURES (From Original) -No lid lift -Individual player trays -Supports both vertical and horizontal…
This is a collection of stackable boxes, compatible with for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer…
Alchemist: The smoothest printed pump action blaster! Now avaliable with metric hardware
The source marked this model as adult content.
Zoo de Ensueño: Aventura en Puzzle 3D ¡Sumérgete en una experiencia de aprendizaje vibrante y colorida con nuestro exclusivo conjunto de animales de puzzle 3D! Cada modelo ha sido cuidadosamente diseñado para capturar la esencia de sus…
Chrom's Falchion from Fire Emblem Awakening, modeled in Solidworks. Made to as accurate as possible. All one piece, intended for figurine scale/ keychain design, but can be scaled to any size. Will post multipart piece if requested…
This is the top for the Sector Mechanicus Alchomite Stack Category: Games
This is a set of quarter height storage boxes for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I use…
Want your Alchemist to be that much better ? Look no further! Linear rails offer buttery smooth motion while restricting all forms of wiggle and rotation. As an added bonus, this means that nothing ever touches your barrel, so your…
The difference is that my version has considerably more storage space inside. The play between the parts has also been reduced somewhat as everything was simply too loose. In addition to the existing symbol wheel, I added three more with…
Full metal alchemist Wall Art
I have remade the ALCH design board holder to hold all but the vertical hole board! All design boards fit very well and are easy to grab without any friction binding the material to the holder. This holds all the M3-M10 hardware design…
A new 3D figurine generated by AI, a Chibi Edward & Alphonse Elric (Fullmetal Alchemist). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small…
Bookcase/alchemy shelf for miniature lovers. Dimensions shown in pic. I made this to fit with something else, that's why the size is a little strange. I personally used a 0.25mm nozzle and 0.12mm layer height with this. No supports/brim…
The Flamel refers to the mystical and alchemical symbol depicted as a cross with a snake or serpent draped about it, as well as detached wings and a crown above it. Includes three different versions: Type A double-sided Type B one-sided…
Falchion knife from CSGO. Prints great in PLA. Model is scale to size of in game model, may need rescaling for your printer :D works from scales of 20%-300%! Any issues, drop me a message! (Static)
This is a remix of the excellent model by js500 that also holds the full Alchemists expansion. I regularly play with the expansion and wanted to store everything Quacks in a single box. The organizer holds the Quacks of Quedlinburg base…
Dogtag with Ouroboros inspired by Fullmetal Alchemist anime. The Ouroboros is a mystical symbol representing a dragon devouring its own tail. It represents the eternal cycle of life and death or wholeness and infinity. Includes three…
A witch alchemist stirring a cauldron with bubbling liquid, robes flowing down into a stable circular base. Single-piece model, made for 3D printing, without fragile parts. Model was tested in Orca Slicer for printability. Just scale it…
the falchion from fire emblem, cut peices are for 200mm print beds and the full sized stl is also included in case you would like to resize or to recut Category: Props
Don't throw hobby knife blades in the trash! This is a 1x1-grid, sealed blade disposal storage box, compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular…
This project features a making of Wooden Vertical Carousel Spice Rack adorned with Alchemic Design decorations, alongside spice boxes embellished with laser-engraved patterns. Using Oak, Alder, and Walnut, I created a smaller version of…
Concoct magical brews with this industrious Potion Master Gnome! Clad in a sturdy apron and pointed hat, he holds aloft a bubbling round‑bottom flask while surveying his latest creation. A rustic workbench beside him is strewn with…
cartel full metal alchemist Boquilla: 0.4mm Material: PETG, PLA Capa: 0,2 mm Perímetros: 2 Relleno: 15% Soportes: no Ala: No
The gcode is a 2 colors print
Here's my model for the Spiritbound Falchion, a summons from Frosthaven! The Frosthaven version has a green crystalline blade, but since floating animated weapons are useful in so many fantasy settings, I've also included a metal bladed…
Full Metal Alchemist Flame Circle / Transmutation Circle key ring. I've included: an MMU version which has a uniform surface A single-extruder version with for printing with a color change
This is a Dremel bit holder I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The bit holder is based on the 40mm stackable model and can be used on top of a 2x2 sized 40mm box. This model is designed for the 3.2mm dremel…
A 3D printable gnome perched in a tiny treehouse, the trunk doubling as the figure’s pedestal. The entire treehouse and gnome should be fused into one whimsical, sturdy piece. Model was tested in Orca Slicer for printability. Just scale…
A Christmas present for my brother. He loved them and thought I'd share. final result was a bit on the thick side but you are welcomed to scale. This holder was designed to go with it https://www.printables.com/model/501424-coaster-holder
This is a 2x1-grid, half height, storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I use…
This is a ER20 Collet holder I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 2x3 sized 40mm box. This model is designed for 6mm label…
kleines Regal für kleine Prinzessinnen
🧪 Alchemist Gnome – Master of Mysterious Brews! Step into the magical world of potions, elixirs, and arcane experiments with this highly detailed Alchemist Gnome ! Few supports are needed. I used organic-style supports, which peeled off…
Download and use one of Chane's modified shrouds from the linear rail remix. If using a linear rail (reccomended) then also grab the Chance priming block for the rail you are using. If not, then use the stock priming block. Even if you…
Hi Sarah, I think this is the helmet you were refering too? Please check the sizing suits your needs and please post some pics of your cosplay outfit, if and when you get there ; ) Cheers Jace Original model can be found over at the…
This is a remix of Adventure Tactics Domianne's Tower Insert by hagarlucky I have completely redesigned this insert to hold the base game, Domianne's Tower, the expansion, Adventures in Alchemy, and Hero Pack 1 in the base game box! This…
This is the dagger used by Maes Hughes in the Fullmetal Alchemist series, a fun and simple print to compliment a cosplay or shelf. This can be printed standing with minimal support, or laying flat using the split model. The split model is…
This was designed to fit above the power supply on my Prusa Mk3 with enough room to dispense them via the bottom, but It's just mounted with double stick tape so It should work for a lot of other situations/printers etc. Fits packets 50mm…
I designed this Scar MK17 inspired Alchemist buttstock to make it 60mm longer and tweak the blaster proportions a bit to my personal preferance. It is exactly compatible with the original surroundin parts and can be printed with no…
A not so simple to print 20x20 calibration cube. This object tests your dimensional accuracy, overhangs, bridging, pressure advance, circular accuracy and on and on! This cube is designed as a basic and fast but detailed story of the…
This is a shallow tray or brushes that is compatible with for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer…
This is a from the scratch adaptation of dhiltonp's excellent gridfinity storage box, to fit with Alexandre Chapelle's ALCH storage system that I am using a lot throughout my workshop and office. The box has one 23mm, two 20mm, two 11.4mm…
After printing the Alchemist Puzzle Box designed by Tom Donoclift, I needed something special to store inside. So, I came up with this set of 3 stones that "magically" light up when placed near a wireless power source. This is made…
I use a ton of these and they are always scattered all over the place. There is a small overhang at the mouth of the dispenser that will need a tiny bit of support. -Cheers-
A Alchemical Homunculus. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Split this in half for easy printing. Scale to 1000% to get the correct size. Category: Toy & Game Accessories
The file is divided into objects for better printing and less material waste. Glue is required for assembly.
Was hard to keep the ears when removing the supports. Printed at 50% on 0.050mm using 3DJake EcoResin light gray.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is a 3x1-grid, quarter height, storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I…
Liked Rocket_arm's triggers so much I had to remix it to fit the Alchemist. This version works with the release version of the blaster, but eventually I'll also upload a metric version to fit 6mm trigger pins which my own blaster uses.…
Aaaaaalchemist - all the fun and practical improvements of the Alchemist by Sillybutts, but now with 10mm more of draw, bringing its performance on par with the Talon Claw T4. The entire blaster is only 10mm longer as well. Only two…
This is a base for creating your own holder/containers for Alexandre Chappel's 55mm storage ModuBOX. The files include the half size one and a full size one. I uploaded a base of a 2x2 and 2x3, those will qualify in most cases to hold…
The ‘Daylight on a Stick’ (type ‘extra’) sold by https://www.alchemy3d.de has a different distance between the LEDs than the original ‘Daylight on a Stick’. This model is a remix of the baffle from…
I got tired of my ingredient cards falling off of my player screen. Worse yet, sometimes, they'd slide through the little hole and show everyone what ingredients I was testing. So I came up with this little holder you can slide right into…
Let me give you some advice. If you see a woman with fiery red hair on the battlefield, you don't walk, you run. That's Isolde. She's not a mage; she's a scientist, and her field of study is a cold, pragmatic revenge. She's not trying to…
Original models from the Everquest Mass Multiplayer Online Role Playing Game (MMORPG) extracted from the EQG files. Great for use in miniatures, tabletop RPGs, 3d modeling, reminiscing about an exquisite game... whatever your heart…
This is a 1x3-grid, 3/4 height, storage box with sub dividers, for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridinity and i have tons of drawers and tool…
[Print Settings] infill 20% PLA+ .12 - .16 layer height [Dimensions] Box: 46mm tall, 121mm wide, 215mm long Lid: 3.7mm tall, 120mm wide, 210.85 long if your print bed is smaller than 220mm I don't recommend printing this. otherwise you…
Storage box for the IKEA 365+ Rectangular Glass Box for the grid system made by Alex Chappel (https://www.alch.shop/). Takes up 4x6 grid.
PLA. 200 degrees nozzle, 60 degrees bed. Roughly 10-15 minutes.
This is a I CNC router bit holder made for Alexandre Chappel's 55mm storage grid system ModuBOX. The holder is based on the full 75mm height. this model is designed for 6mm label tabes instead of the larger ones. It can fit the following…
My attempt to create a Gnome Alchemist for RPGS. You may need to resize it to fit your gaming needs.
Josep Puig i Cadafalch BARCELONA BALDOSA PANOT SUELO ACERAS BARCELONA. IMÁN NEVERA, LLAVERO O POSAVASOS. Josep Puig i Cadafalch BARCELONA TILE PANOT FLOOR SIDEWALKS BARCELONA. FRIDGE MAGNET, KEY RING OR COASTERS. Category: Scans & Replicas
Perro salchicha para decorar tu estancia
a quick and simple fullmetal alchemist set for lucky 13
Please note that this organizer is designed for used games; the deduction grid container does not take into account the full thickness. Update dated February 11, 2026 For convenience, some of the components have been changed: Deduction…
My attempt to create a Human Alchemist Shopkeeper for RPGS. You may need to resize it to fit your gaming needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it…
This was designed to hold a set of SAE and Metric sockets and wrench and be compatable with Alex Chappel's assortment system grid. Has wells for the socket wrench, socket extender, drive adapter, 3 Dewalt socket adapters , and 15 metric…
My attempt to create an Elvin Alchemist Shopkeeper for RPGS. You may need to resize it to fit your gaming needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it…
Stempel (Stamp) Herzchakra - Ø 33mm PLA 15% infill
This is a custom handguard I designed for Sillybutts' excellent Alchemist nerf blaster. The front and rear barrel shroud sections are functionally identical to the original, but with different cosmetic cutouts. The muzzle section is…
This is an SD card storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I use for this…
Storage box for the IKEA 365+ Circular Glass Box for the grid system made by Alex Chappel (https://www.alch.shop/). Takes up 4x4 grids.
This is the GridQuest Alchemists Desk Game size: 2x1 fields Made to make your dungeon a little bit more special. Enjoy! MORE stuff: Please do not hesitate to have a look at all HeroQuest & GridQuest parts we made so far.…