Search results: analogue

Sort order

80 models

P
PrintablesNightHawk3D

Analogue Pocket Cartridge Slot Dust Cover

Correct geometry to a gameboy cartridge. No goofy overhangs and designed with 3D printing in mind. Part is oriented for printing. Just drop in your slicer and send it. Best if printed in ABS on a well calibrated machine.

Downloads
1,409
Likes
105
Rating
5
P
PrintablesRetro Frog

Analogue Pocket Stand

I know there are a bunch of stands for the Analogue Pocket FPGA gaming handheld, but I wanted to create one for myself. Learn about all my designs at retrofrog.net

Downloads
1,000
Likes
113
Rating
5
P
PrintablesDrew Heavner

Analogue Pocket Case

Version 2.0 Released! Re-designed the case from the ground up to improve print ability and overall aesthetics. Added several variants including a cable winder, no carts, improved inserts for adapters and button cutouts. --- After getting…

Downloads
770
Likes
186
Rating
5
P
PrintablesSeasonedBeef

BeefyGrip for Analogue Pocket - console-sized contoured grip

beefygrip.com Purchase a high quality ABS print (with felt lining installed!) from me, the designer to support this project. (US and International shipping!) This is comfy contoured console style grip for the Analogue Pocket handheld. It…

Downloads
500
Likes
54
Rating
5
P
PrintablesBlueShell3D

Analogue Pocket Dust Cover

Analogue Pocket Dust Cover

Downloads
452
Likes
56
Rating
5
P
PrintablesBlueShell3D

Analogue Pocket Display Stand

A stand for the Analogue Pocket

Downloads
374
Likes
39
Rating
5
P
Printableshuczekdesign

Analogue Pocket Display Dock

I designed this display for my Pocket to mimic and honor the design of the official Dock that Analogue sells. Print face down as shown in the pictures No supports needed Printed at 0.28mm layer height (approx 3hr) NOTE: This item is not…

Downloads
335
Likes
47
Rating
5
P
PrintablesFleedar

Analogue Pocket

This is a reasonably accurate model of an Analogue Pocket created from measurements taken from an actual unit. I used this to sculpt a custom grip. Included is a single combined STL, separate STLs for the front and back halves, as well as…

Downloads
308
Likes
27
Rating
0
P
PrintablesSchrockwell

IKEA SKÅDIS mount for Analogue Pocket

When your Analogue Pocket is out-of-pocket, proudly populate your pegboard with this stylish bracket. 100% infill is recommended. Pocket not included.

Downloads
298
Likes
36
Rating
0
P
Printableswizzo

GameCube to GBA Adapter Case (Analogue Pocket)

An alternative case for the official GameCube to GBA adapter which fits comfortably in the Analogue Pocket. It reuses the screws holding the original case together. The reason for this case is because even after removing the clips that…

Downloads
266
Likes
43
Rating
5
P
PrintablesVasilii

"Will Return At" Sign With Analogue Clock Face

This is a “will return at" sign with an analogue clock face to inform visitors when you'll return (e.g. to your work place). Also known as “return sign”, “back soon sign” or “be back note". It can be placed on a horizontal plane such as…

Downloads
236
Likes
78
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem2 Analogue FPGA based retrogaming console enclosure

This is the MiSTer Multisystem2 Analogue enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the…

Downloads
211
Likes
18
Rating
4
P
PrintablesBlueShell3D

Analogue Pocket Grips (WIP)

Print standing up with 4 perimeters, and ZERO infill. NEW POCKETS AS OF SEPT-2023 ARE SLIGHTLY BIGGER. Try increasing the size by .5% Use metal M4 bolts to tap screw holes before using 2 M4x6mm NYLON bolts to hold the Pocket in place. The…

Downloads
210
Likes
24
Rating
0
P
Printablesmagu

Analogue Pocket Face Mask

Protects the important bits of the Pocket without adding any bulk. Works best in TPU, for cushioning and no scratches.

Downloads
194
Likes
33
Rating
5
P
PrintablesRaysWays

Retro Gamer Stand Universal Handheld Gameboy CellPhone Anbernic RG405V Analogue Pocket Retroid Miyoo AYN

I designed this stand for my Anbernic RG405V but I do believe this would work universally for any Gameboy styled handheld retro gaming device or cell phone. It also includes a cut out for a power cord to come up through the bottom. It was…

Downloads
170
Likes
19
Rating
0
P
PrintablesTimeless Doctor

Analogue Pocket Dock and Adapter Rack

A minimalistic rack to fit all 4 adapters and the dock for the Analogue Pocket. The goal was to fit everything well in a very small space, without requiring long printing times or a lot of filament. There are also holes at the bottom to…

Downloads
157
Likes
27
Rating
0
P
Printablesnode

Analogue Pocket Peli 1040 Lid Insert

This simple design fits into the lid of a Peli 1040, safely holding an Analogue Pocket in place. Without something like this, the Analogue Pocket still fits neatly into the bottom of the case, but falls into the lid if you tip it upside…

Downloads
124
Likes
23
Rating
0
P
PrintablesDave

Analogue Pocket Dock Guide Rails

I love the Analogue Pocket and its dock. However, the dock has an annoying design flaw. The dock's USB-C plug is slightly taller than the recess it sticks out of. These guide rails (ugly, but functional) make it much easier to line up the…

Downloads
117
Likes
13
Rating
5
P
PrintablesErik Gregorio

Rugged Analogue Pocket Case

I found the Analogue Pocket Case by Drew Heavner was the best Analogue Pocket case out there. However, I didn't like that the lid was only secured with magnets. I like the design of the Parametric Rugged Box by Whity so I decided to…

Downloads
112
Likes
20
Rating
5
P
PrintablesPathian

Analogue Pocket Adapter Rack

A simple 4 slot rack to fit the Game Gear, Neo Geo Pocket Color, Atari Lynx and Turbo Grafx 16 adapters for the Analogue Pocket. 10-20% infill, no supports. Slower speed on the last few layers recommended for lettering resolution.

Downloads
105
Likes
16
Rating
0
P
PrintablesSpotmatic

Olympus Pen (analogue camera) 28mm filter adapter, lens hood and lens cap

A push-on filter adapter for 28mm filters, a lens hood, a lens cap that can be used with the filter/lens hood, and a flat lens cap with/without logo. The lens hood is inspired of the original one. If someone has the exact dimensions of…

Downloads
104
Likes
13
Rating
0
P
Printablesmmca

Analogue Pocket to Pelican 1040 case

I printed it out of TPU. Using 1in x 1in low density foam strip on the top lid to hold Pocket in place. Triangle infill seems to work well. 6 top layers will keep the infill from showing through. V7 adjusted pin location for printing with…

Downloads
102
Likes
15
Rating
0
P
Printablesmaxelman

8BitDo 64 Controller Stand - STEP / Analogue 3D

Includes alternate with Analogue logo Originally remixed when source file was Public Domain

Downloads
101
Likes
19
Rating
5
P
PrintablesHappybanjo

Eyecup for Olympus OM-1 analogue camera

This is an eyecup for the Olympus OM-1 analogue camera.

Downloads
91
Likes
8
Rating
5
P
PrintablesJmaxime89

Analogue Pocket bumper case

Original creator on thingiverse mentions : Print at 0.16 and 20% infill with PLA or if you want to print in TPU to avoid scratches use the stl made for that. Already oriented for best print, use supports everywere. Don't forget to add you…

Downloads
87
Likes
17
Rating
2.5
P
Printablesprestia

Analogue Pocket Pelican 1040 Adapter

Tolerances are tight enough to work with TPU or PLA.

Downloads
86
Likes
7
Rating
0
P
PrintablesSeasonedBeef

Grip Dock for BeefyGrip (and Pro Trigger Grip) Analogue Pocket

This is a two piece desktop stand for use with both the BeefyGrip and BeefyGrip Pro for the Analogue Pocket. This STL is released as free for non-commercial purposes. If you would like to purchase a high quality ABS print of this thing…

Downloads
86
Likes
18
Rating
5
P
PrintablesDrew Heavner

Analogue Pocket Screen Protector Guide

A simple model that fits over your Analogue Pocket to help align and apply your screen protector perfectly!

Downloads
83
Likes
15
Rating
5
P
PrintablesAferac

Analogue Pocket - Rugged box

A remix of the parametric rugged box adapted to the Analogue Pocket. Inspired by https://www.printables.com/model/755752-gameboy-advance-sp-rugged-box There are 2 lids available, with or without the Analogue Logo. The inserts can be…

Downloads
82
Likes
14
Rating
5
P
Printablesmaxelman

Analogue 3D / N64 Controller Port Dust Covers

Includes a few options: Single hole to show LED 1/2/3/4 controller markers (no LED hole) Analogue Logo For best results: Iron top surfaces Print with the front facing up and limited supports on the outside like this

Downloads
76
Likes
5
Rating
0
P
PrintablesPCR

Analogue Pocket Peli 1040 Inlay

UPDATE 09.01.2023 Modified it that AP fits with GBA Cartridges.

Downloads
66
Likes
10
Rating
0
P
PrintablesSingul4ris

Playstation 5, King Controller Analogue Stick replacement

For all those who, like me, own a PS5 ‘King Controller’ and have lost one of the analogue sticks. Here is a suitable replacement. I printed the stick in PETG. I think PLA is also stable enough.…

Downloads
65
Likes
3
Rating
0
P
Printablesarekuse

Stand for Analogue Pocket in Hard Case

My Analogue Pocket is kept in the official enclosure. I created a vertical stand for it. No supports needed.

Downloads
64
Likes
5
Rating
0
P
PrintablesLarry Guo

Mini clock for radio-controlled quartz analogue clock movement

This clock is designed for the WWVB movement linked below. Standard quartz movements should work as well, as long as they can fit inside the following bounding box: 66.1mm x 56.3mm x 19.2mm. It has been designed from scratch by myself for…

Downloads
63
Likes
21
Rating
5
P
PrintablesVelvia

Analogue Pocket Analogizer Stand

A stand that for the Analogue Pocket, compatible with the Analogizer. Recommended print orientation Print with a brim to minimize warping.

Downloads
60
Likes
6
Rating
0
P
PrintablesChris.JLSY

Minimal Analogue Clock

Parts: Movement Used: https://www.leevalley.com/en-ca/shop/hardware/project-supplies/52297-continuous-sweep-clock-movements The dimensions are 2 7/32" × 2 7/32" × 5/8" Shaft diameter of 5/16" Shaft length of 3/8" Order a second hand which…

Downloads
59
Likes
30
Rating
0
P
PrintablesProf_gLX

Top Shot Elite analogue replacement - dome style

Remove the old top shot analog sticks sticking out and replace with a better looking analog "ball". Initial design used in a top shot elite Gun4IR mod, which doesn't have support for the analog sticks. Print in 0.2 or 0.12 for a better…

Downloads
58
Likes
4
Rating
0
P
PrintablesTom Wilkie

Analogue Alarm Clock for Home Assistant

An analogue alarm clock for home assistant - twist the bezel to set the alarm time and trigger your wake up routine! Uses the M5Stack dial for the display and my 3D printable bezel replacement . Firmware is based on ESPHome. The source…

Downloads
55
Likes
17
Rating
0
P
Printablesfran122157

Analogue Pocket adapters dust covers

Dust covers for the analogue pocket cartridge adapters

Downloads
55
Likes
11
Rating
0
P
Printablesprestia

Analogue Pocket Pelican 1040 Top Straps

This should be paired with my base: https://www.printables.com/model/1320259-analogue-pocket-pelican-1040-adapter Print two straps and they should friction fit in the lid. You can use double sided tape to make them extra secure.

Downloads
54
Likes
6
Rating
0
P
PrintablesPuTaTuo

Analogue Pocket D-pad with Larger Sterm

The metal case Analogue Pocket comes with improved D-pad, so I wonder if I can make the same for the original plastic model to improve the D-pad. This design has a slightly higher sterm and an enlarged section at the top than the original…

Downloads
54
Likes
9
Rating
0
P
PrintablesDanny

Analogue Pocket Dock Wall Mount

This allows you to wall mount the official dock for your Analogue Pocket. There are five variations depending on how you plan to run your cables: All Openings. If you are unsure or plan on moving it in the future, this option will work…

Downloads
53
Likes
10
Rating
5
P
PrintablesWhoIsLudwig

Analogue Pocket Dock Protective Case (print in place)

The Analogue Pocket Dock is a nice little device that opens up the Pocket to bigger screen world. But it's also precious and expensive and there is no dedicated solution (yet) to take it away without fearing to damage it. This case…

Downloads
50
Likes
9
Rating
0
P
PrintablesTibo

Analogue Pocket + cartridge dock

A dock to accommodate the official charging dock, the 4 pocket adapters and 3 GB/GBA cartridges (or 7 GB/GBA cartridges). This is my first 3D modeling, I am quite satisfied with the result for my personal use but I invite you to make it…

Downloads
49
Likes
5
Rating
0
P
PrintablesXybr

Controller Port Dust Plugs for Analogue 3D & N64

After I got my 8bitdo 3D Controllers, I realized I needed something to cover the controller ports to keep dust out. I saw some designs, but wanted something different. I modeled these using Shapr3D, some calipers, and patience until I got…

Downloads
42
Likes
3
Rating
0
P
PrintablesTimon

Modern Minimalistic Analogue Clock

I made a simple, minimalistic, analogue clock. It uses a cheap movement from Aliexpress . It doesn't have a seconds hand. I originally planned on making one, but the shaft for it was simply to small to be 3d printed and I think it looks…

Downloads
42
Likes
5
Rating
0
P
PrintablesswitchCTRL

Analogue Pocket HSW Mount

Analogue Pocket Holder for Honeycomb Storage Wall Enhance your retro gaming setup with this modified Analogue Pocket holder, specifically adjusted to fit seamlessly into the Honeycomb Storage Wall system. This model offers a sleek and…

Downloads
42
Likes
7
Rating
0
P
Printablesbulgogi19

Analogue Pocket Grip Remix

Remix of the grip by RobitGames to add a bottom support. I found this helps when printing in TPU to keep the grip from pulling apart. Used the bottom of this case by santiis2010 https://www.thingiverse.com/thing:5372312 and just slapped…

Downloads
41
Likes
4
Rating
0
P
PrintablesHalfCent

Multiboard Analogue Pocket Holder

There isn't anything hard about the print. Standard Multiboard print settings work fine.

Downloads
41
Likes
8
Rating
0
P
PrintablesFleedar

Chunky Analogue Pocket Grip

This is a very ugly, lumpy grip for the Analogue Pocket. It was made by mashing clay around a dummy Pocket, scanning the resulting shape using photogrammetry, then mirroring and lightly cleaning up the mesh in Fusion 360. I sculpted the…

Downloads
38
Likes
9
Rating
4
P
Printablesvladikmukin17

Bearing analogue

Bearing analogue

Downloads
34
Likes
5
Rating
0
P
PrintablesSODA3D

Analogue Pocket Dock - Travel Case

Affiliate links for my favorite filaments to help support what I do are here: Linktree I recently took a flight and hated that I had no way to protect the dock for my Analogue Pocket Dock. I noticed that there were no models or even…

Downloads
33
Likes
2
Rating
0
P
PrintablesSunShine

Cheap Digital Caliper to Analogue Conversion

I bought a cheap digital caliper from amazon about half a year ago, however the electronics apparently didn't like being used as an improvised hammer, and the electronic part of the caliper quit working. So i designed a conversion kit…

Downloads
30
Likes
15
Rating
0
P
PrintablesSteven La

Analogue Pocket TPU face cover

This is a remix of @magu's excellent Analogue Pocket Face Mask to include: USB port cutout Side button indents, so the case doesn't accidentally press power or volume Slimmed cutouts for face buttons to provide more structure Analogue…

Downloads
29
Likes
1
Rating
0
P
PrintablesDDRBoxman

GameCube to GBA Third Party Adapter Case (Analogue Pocket)

An alternative case for third party GameCube to GBA adapters that fits comfortably in the Analogue Pocket. It reuses the screws holding the original case together.

Downloads
28
Likes
6
Rating
0
P
Printableshelloruiz

Analogue Duo Vertical Stand with HuCard Display Bracket

Important I do not know enough about the Analogue Duo to claim that it can safely operate in this orientation. Please consider removing it from the stand before using it, otherwise you are responsible for any risk or damage to the unit.…

Downloads
27
Likes
3
Rating
0
P
PrintablesDefaultGen

Analogue Nt NES cartridge slot insert

This is an insert to fix three problems with the Analogue Nt cartridge slot: The cart slot is very loose. This removes a lot of the back and forth wiggle. It raises the cartridge by 3mm. In my experience, the Nt reads carts better if they…

Downloads
26
Likes
5
Rating
0
P
Printablesdukestah

Analogue Pocket Stands

Two versions of stands for the Analogue Pocket. They can be used just to hold the device, to charge it or to charge it and have an audio connection. No HDMI like the original! The charge/audio version (Stand 2) is highly experimental! The…

Downloads
26
Likes
6
Rating
0
P
PrintablesNate

Light Boy adapter for Analogue Pocket

After receiving my Analogue Pocket, I was disheartened to discover that it wasn't compatible with one of the finer gaming accessories of all time- The Hori Light Boy VLB-01. I thought this would be an excellent opportunity to create a…

Downloads
24
Likes
5
Rating
0
P
Printableskapiosk

Analogue film holder

Found a bug or need a feature? https://github.com/kapiosk/Film-Holder

Downloads
23
Likes
2
Rating
0
P
PrintablesPrint_It

Analogue Pocket Grip with front strap

Remixed this great grip so that the phone stayed in place a bit better

Downloads
20
Likes
0
Rating
0
P
PrintablesConfusedAnt

Analogue Clock with two servo-controlled clock hands

(see blogpost: https://ant.ms/posts/dev/juliclock/ ) The base for the clock is a headphone stand, in which the 3D-Printed clock fits. The entire thing was modelled in OnShape , and printing using my Prusa Mini . It uses two cheap servos…

Downloads
16
Likes
6
Rating
0
P
Printablesarekuse

Analogue Duo Hucard Dust Cover

Simple dust cover for Hucard slot of the Analogue Duo. No support needed.

Downloads
16
Likes
1
Rating
0
P
PrintablesIsak Hendrikse

LED VOLTMETER FRAME for retro look to match old Analogue Ammeter

I wanted to replace the old Analogue Voltmeter with a new LED Voltmeter. I designed this frame to mount the new LED voltmeter in a frame that match the old meter looks and dimensions on the face of the PSU. The second version have the LED…

Downloads
15
Likes
1
Rating
0
P
PrintablesDave

Analogue Pocket Guide Rails - Lite

Simple, low profile guide rail to help you line up your Analogue Pocket while using the dock so you don't scratch it. The rail needs to be stuck to the dock with double-sided tape. For a beefier, non-stick solution, see…

Downloads
15
Likes
2
Rating
0
P
PrintablesEntirelyTom

Mister Multisystem 2 Analogue "Front loader"

Remixed the top bit of the Multisystem 2 Analogue to allow for front loading of NFC cards rather than back loading because it wasn't an ideal solution for me. Haven't tested sliding in an NFC card while there's an expansion cartridge…

Downloads
12
Likes
1
Rating
0
P
Printablesschmingy

Analogue Pocket Adapter Custom Game Case Holder

This is a couple adapter variations I designed for the Game Gear plastic game cartridge cases sold by CustomGameCases.com found at https://www.customgamecases.com/online-store/SEGA-Game-Gear-c133122509 . I'm not affiliated with…

Downloads
11
Likes
4
Rating
0
P
Printablessleepyhead

Analogue Pocket Dock Adapter

I leave this dock on my desk most of the time but I don't have the Pocket in it. I created this adapter so I can use it for my phone, small tablet or alternative handheld gaming devices. I printed using PLA at .20mm layer height. I know…

Downloads
11
Likes
0
Rating
0
P
PrintablesMeaker VI

Analogue King Of the Hill Timer for Combat Tagging Sports

As I am not versed in the machine language, I have been forced to come up with an analogue solution to a gameplay aid I've wanted for a long time. Historically, to play king of the hill rounds in Nerf battles, I would use two (or more)…

Downloads
10
Likes
4
Rating
0
P
PrintablesHungry_Hank

Analogue Voltage Gauge Holder - DIN Compatible

This printed mount is great for holding those common analogue gauges (GB/T767). I've designed it so that its compatible with the popular DIN mounting system (see remix and attributions). There are holes on the top and sides for mounting…

Downloads
9
Likes
5
Rating
0
P
PrintablesPugwash

Land Rover Discovery 1 Analogue Clock

Parts Required: You will need to have an original Range Rover Classic analogue clock. I used part YFB 100 410 - black face although I believe YFB 100 460 - green face is the same physical size. Optional: For the "With glass" version,…

Downloads
9
Likes
2
Rating
0
P
PrintablesRJD2

DJI Analogue Ground Station

Ground station for mounting the DJI analogue module so you can quickly go between your goggles and tripod depending on usage. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38…

Downloads
8
Likes
0
Rating
0
P
PrintablesTobias Stanzel

Digital ClockClock 24 — a kinetic clock made of 24 little analogue clocks (LCD build)

A ClockClock 24 is a digital clock built out of twenty-four little analogue ones. The hands sweep into position to form the digits, hold them for a minute, then break formation and do something else entirely before sweeping back. The…

Downloads
8
Likes
6
Rating
0
P
PrintablesAchim

Analogue Pocket grip with (magnetic) add-on box and front-cover

The Analogue Pocket (sadly) doesn't come with integrated Bluetooth. :-( You'll have to use a third-party BT-transmitter in order to enjoy wireless headphones. However, having that extra accessory hanging from the bottom of the Analogue…

Downloads
7
Likes
2
Rating
0
P
Printables

Analogue Pocket Dock - Travel Case

Affiliate links for my favorite filaments to help support what I do are here: Linktree I recently took a flight and hated that I had no way to protect the dock for my Analogue Pocket Dock. I noticed that there were no models or even…

P
Printables

Analogue 3D / N64 Controller Port Dust Covers

Includes a few options: Single hole to show LED 1/2/3/4 controller markers (no LED hole) Analogue Logo For best results: Iron top surfaces Print with the front facing up and limited supports on the outside like this

P
Printables

8BitDo 64 Controller Stand - STEP / Analogue 3D

Includes alternate with Analogue logo Originally remixed when source file was Public Domain

Cradle for Analogue Pocket (with Cartridge Stabilizer)

This Cradle is designed to fit the Analogue Pocket console. I always print my Cradles with Fuzzy Skin (0.1 point distance, 0.1 thickness) so the model might need to be sized down by 0.1% if you don't want to use Fuzzy Skin. This model…

Likes
5
Rating
0
P
Printables

Analogue TED Tree

I tried forever to design a test tube style rack for analogue TEDs, but the issue is that they vary a great deal in terms of width and length, so it popped in my head one day that a tree style stand might suit the same purpose but allow…

INCOG Stand for Analogue Pocket

This stand uses the Analogue Pocket's 4 rear screw holes to balance the console, creating a gentle display tilt. See the family of INCOG stands on my website ! NOTE: AP-INCOG-Weighted - This file has a modifier that increases infill at…

Likes
3
Rating
0