Search results: android

VGA IOS AND ANDROID USB-C / LIGHTNING PROTECTION CABLE

remake I made of a model and made it easier to print and also made it so that it could be enclosed.

Worx Landroid Customizable Cutting Disc

Open in Fusion 360 and you will find parameters under the modification menu. See screenshot. You can change the diameter, the thickness of the disc, the number of blades, etc. I used CNC-Kitchen short m4 thread insert. Don't forget to…

Android Phone Holder REMIX

I printed this model but found the two bottom supports the phone actually rests on were too far apart for Android mobile devices. So, I slightly modified these supports to better hold iPhones. Please see additional print info. in the…

Wheel Worx Landroid M500Plus WR165E

Added 10/11/2025 V3 rim center w/o connector parts (Schraubverbinder) (Felgenschüssel ohne Schraubverbinder) and suitable tire with M3 metric threads. Printing the threads in tpu might fail but then you can just screw them in. Threads for…

Worx Landroid M Garage Mk2

Handy UV and elements cover for your landroid mowing robot. May be easily adapted to different mowers. This is update Mk2. I made it 2cm higher after observing a couple of collisions. Option with ridiculous Cyberpunk vibe provided as…

Rear spoiler for Worx Landroid M+ models and L models

This spoiler is a remix, made from a RC Car Spoiler that i found on thingiverse. The spoiler is put together using super glue I used dobbeltsidet tape to mount it on the Landroid. Recommend to print in ABS or ASA Let me see them makes and…

Ipad and android tablet vesa mount bracket

Simple Vesa mount for ipad or android tablet with various size and various screw support (m4,m5,m6). there are three screw variation, m4, m5 and m6. all flat heat, so it can flush without bumping the ipad or tablet. there is short,…

Wheels for WORX Landroid PLUS WR148E

The wheels are for WORX Landroid PLUS WR148E. Diameter 220mm. The Weigths from the old wheels can be used (have to be used) Improves spinnig wheel problem. I print the Cover and Hubs in ASA (can be printet also in PETG or PLA) The Tire is…

Worx Landroid Front Wheel/Worx Landroid vorder Rad

Hi i designed a Wheel for my Worx Landroid (Worx Landroid M-500) because we have a uneven garden so Ive designed a wheel to fix issues when my wheel gets stuck, and it not get over our stones try it yourself and Test it! I Hope it can fix…

Studded wheel for Worx Landroid

My take on studded wheels for the Worx Landroid robotic mower. It's heavily inspired by https://www.thingiverse.com/thing:3750909 , but I designed it from scratch in OpenSCAD. It's been tested on an S500i and an M700. So far, it works…

Desk shelf phone/ipad/android tablet holder

phone holder for your desk shelf, inspired by balolo cokcpit system. can be used for ipad or android tablet too.

SIM Micro SD Card Pin Ejector Remover for Android Apple iPhone

use at your own risk, you have a chance of this breaking off and getting stuck.

Marvin The Paranoid Android

If you don't have Homey and still would like to print Marvin The Paranoid Android from the Hitchhiker's guide to the galaxy this thing provides you with a head, neck, visor and eye lids. Bottom part of the head and neck attached to the…

Android 17 Dragon Ball Z #23 Optimized for 3D Printing

—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…

Worx Landroid WR167E - Cutting disc

Cutting disc with 6 blades compatible with WR167E - Landroid M700 Plus This is the new version of Landroid with the Hex adapter below the cutting disk. Diameter and total height are the same of the stock cutting disk. Just use M4 standard…

Spoiler Heckflügel Wing Worx Landroid

Heckflügel für Worx Landroid

Worx Landroid weight trunk that looks good

If you have a Worx Landroid that has traction problems specially with tall grass or slopes, adding weight to it, particular weight behind the rear axis, will improve its traction significantly. I'm not the first to come with this solution…

usb-C dust cover for Android smartphones with ultra-slim protective sleeve

There are some usb-c dust protectors on printables but they were too bulky or too shaky for me. That's why I designed my own protection for my smartphone with a Pitaka protective cover. if you need any adoption or change let me know :-)…

Carplay, Android Auto 10"- CD car mount

CD Mount for 10.26" Carplay external screens that can be found on Aliexpress/Amazon. The one im using is from Aliexpress OBDPEAK T20. It uses the 4 clips mounting system. This remix version has the following feature from the original.…

Worx Landroid Slide-On ruggedised front wheel

This is a slide on for the Worx Android M500 Plus (and possible other models...). I have printed the new rear wheels from the great design from: https://www.printables.com/model/441847-wheels-for-worx-landroid-plus-wr148e and now the…

Android Auto / Apple CarPlay Display Mount for Infiniti G35 & G37

I picked up one of these cheap wireless Android Auto/Apple CarPlay displays from Amazon (specifically the 9.26" one from VSTARK which was going for about $189 before coupon at the time of this writing). Rather than plopping it on top of…

Worx Landroid Wheels

Made the wheels from ABS+ (note: these are a tight tolerance, used acetone to lightly soften whilst bolting on) Wheels have holes for press in M3 inserts this is to mount a steel weight. I profile cut a 10PL and match drilled to fit.…

Mount for Chinese Car Play/Android Auto unit | VW Up! Seat Mii Skoda Citigo Seat Ibiza | Navigon

Use it to mount a multimedia unit on the original Navigon mount in your car. Fits: Volkswagen Up! Seat Mii Seat Ibiza Skoda CitiGo

VW Golf mk6 android headunit USB port adapter.

If you purchased an android headunit (Teyes, Mekede, Junsun..) for your vw golf you get a pair of usb ports. This adapter lets you mount those usb ports behind the gear shifter. I mounted mine just with friction but if you want you can…

Worx Landroid WR147E.1 ( L 1000 ) komplettrad

Komplettrad für bessere traktion. Felge aus ASA-X, reifen aus TPU bzw TPE Felgen sind mit 2kg blei gefüllt und somit ist die traktion perfekt. ( 2kg Bleikugeln 4mm Durchmesser ) Wurde dann mit epoxidharz ausgegossen Reifen wurde mit 50%…

Android 21 Majin Dragon Ball Fighters #25 Optimized for 3D

—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…

Worx Landroid 1500L 200mm Disc

this is a two part easy print disc, with a disc diameter of 200mm for the Worx Landroid 1500L Print instructions Category: Outdoor & Garden Summary this is a two part easy print disc, with a disc diameter of 200mm for the Worx Landroid…

Worx Landroid wheel spikes for better grip

A spikes for better grip that helps a landroid going uphill or in a sharp corner

Sexy Android 18

Carplay/Android Auto Screen CD Mount

This is a replacement CD mount for one of those external Carplay/Android Auto screens from amazon/ebay/ali express etc. The mount it came with wasn't really a good for for my car, so I decided to make a CD player mount instead.

support vidéoprojecteur HY320 Android

support vidéoprojecteur HY320 Android plafond et mur

[V2] Worx Landroid Vision cover

Cover for the screen and buttons to protect you Worx Landroid Vision from dust and rain. Printed with PLA but ASA would be more suitable for its UV resistance. Fit into place and hold to the robot thanks to tight clearance. UPDATE : After…

CD Slot Mount for Apple Carplay Android Auto Screen

A CD Slot mount for aftermarket Android Auto/Apple Carplay infotainment units found on Amazon, Aliexpress, etc. The brand I have is Volam, but many other units use the same mounting system. The existing models for a CD slot mount that I…

Worx Landroid Alternative Tires

Our Worx Landlord m500 tends to not only cut the lawn, but also dig new holes with the tires. In difficult situations the mower does not recognize that it is not turning - and uses a brute force move. Therefore I designed other wheels,…

Front wheel widening for Worx Landroid M500+ robot lawn mower

Here is my first post, after 1 year spent with my robot mower, I noticed that the wheel at the front deserved to be improved. So I tried to raise it and widen it. it is therefore suitable for the Landroid M500+ WR165E series . Print in…

Apple Carplay Android Auto Display Blank Mounting Plate

A blank connector/mounting plate that fits aftermarket infotainment displays. The brand I have is Volam but many carplay/android auto displays use the same mount system. I modeled this for a CD Slot mount , and figured this could save…

Worx Landroid terminal cover

I got an extra used charging station for my Worx Landriod, but the terminal cover was missing. I designed a new one myself, based on the one from the original charging station I have. I did not make the finger thing, to make it more…

Android Logo

Android logo in 3D. 5mm high.

Chain Drive Worx Landroid Robot

I did not like the wheels of the robot, because it destroys the lawn. So i build a fully printable chain drive for it. For me it works perfect. No more stucks, no more hole diggin from the wheels. Its easy to print and easy to mount. But…

landroid off limit anchor/nail

easy and fast to print

Android Mini

My version of the Google mascot inspired by Android Mini Collectibles

Worx landroid corner guide

Simple replacement for the corner guide which came with my landroid (WR143E), made from cardboard. Just print and use two short m3 screws to screw them together. Fits both at once on a MK3 bed. Note its only for outward corners (as seen…

Cutting disc 6 blades for landroid with adapters - Messerscheibe landroid mit 6 Messern und Adaptern

Cutting disc 6 blades for landroid with adapters - Messerscheibe landroid mit 6 Messern und Adaptern If you like it --> press like it :-) Cutting disc with up to 6 blades, holes for thread insert which will be installed with a solder iron…

Android Logo KeyChain

I put 100% infill for strength

Fiat 500 7" Android stereo vent

Aftermarket stereos/head units for pre-facelift Fiat 500 (years 2007-2015) usually require removing original diffuser and vents which leads to air blowing into the back of the screen and everywhere under dashboard. This model is not as…

Knife Plate for Worx Landroid M500 (WR165E, model 2020)

!!! The use of the parts is on your own risk, no liability for injury or damage. !!! Custom knife plate for Worx Landroid M500 (WR165E, model 2020) with 5 blades. Can be used on all cut height settings. After printing of the plate part,…

Custom wheels for WORX Landroid - BBS LM Rims inspired

The laser-cut parts are made of 3mm stainless steel. 3d printed parts are made of ASA to last in outdoor conditions. Other materials may be used. The wheels are about 700 grams heavier than the originals (each). The extra weight will help…

OpenIPC PixelPilot FPV goggles for Android phone

These are essentially phone VR goggles but designed with a “module bay” for a wifi module for connecting to a phone. I will add more pictures later. Assembled with M2 screws and nuts. Here is what it looks like: Assembly tutorial:

Mount for Carkool Portable CarPlay/AndroidAuto Screen 10.26 inch

I made this mount for my old ‘97 Toyota Tercel because I didn’t like the original mount that came with the Carkool CarPlay/AndroidAuto screen. It’s made specifically with both that display and my car in mind, so it might not work on your…

Pop Socket iPhone Android Phone Holder Mount Socket Style Adapter Desk Organization

Mount for phone based on the pop socket adapter. Supports not required but recommended.

Landroid Wheels for M500 (WR141E and more)

I got a request from Neistsch to modifying my existing thing to fit the Worx Landgroid M500 series, so over a week or so of emailing measurements, images, test parts etc. we finally got the wheel fitted and adjusted to work. The images…

Worx Landroid WG790 Front caster

I made this for the Worx landroid WG790 series, because the bearings on the originals were busted, and the wheel got destroide when i tried to remove them. Print instructions Category: Outdoor & Garden Summary I made this for the Worx…

ANDROID KEYCHAIN

Print settings Print-in-place I printed in .16mm quality, but you can find the best size for you, using your slicer. I printed these in PLA. 20% infill Use a brim in your slicer to insure the chain sticks to the bed. More Models All the…

Earth screw for Worx Landroid base station

Replacement screw for the Worx Landroid base station and cover. No supports needed

Android eating Apple Key Chain

I made a new version! Now in MultiColor!! https://www.thingiverse.com/thing:3291524 Check it out here! This was my first 3d creation! I made a keychain of a well found picture on the internet of a Android eating a "Apple". Nothing against…

Worx Landroid - Wheel cover

This wheelcover is designed for a Worx Landroid s 2017 Print “Niet” 3 times which holding the ring. Melt it down on the backside of the wheelcover

Stylish Landroid Wheels

After about 4 years in my rough garden, it was time to replace my previous wheels (thing:3750909). This time I did not care about material saving, print time or anything like that, I just wanted to make some nice looking wheels! From my…

Studded Spike Wheel for Landroid Worx Robot Mower

This is a remix from "Studded wheel for Worx Landroid by hasherdk on Thingiverse: https://www.thingiverse.com/thing:4484401 ". Thingiverso did not let me enter this in its Remix Field. Design is not proven on a real mower. So before…

Wire pin for boundary wire : Worx Landroid, Bosh, Husquvarna, Stiga .. and other

List of models: AMBROGIO ALEX ZCS, L15, L15 DELUXE, L200, L250 DELUXE, L250I ELITE, L250I ELITE S+, L350I ELITE, L400I BASIC, L400I DELUXE, 4.0 BASIC, 4.0 ELITE, 4.36 ELITE, L60 ELITE, L60 ELITE S+, B6, L30,D3, L3, S3, L32 DELUXE, L35…

WORX Landroid BBS LM

Color changes have been made in the print. The "nuts" are glued and the center cap is press fitted, for access to the center nut.

Posable Android Robot remix

Remix of an excellent design https://www.thingiverse.com/thing:525796 I made body, head and head ring more rounded and adjusted arm pin for tighter fit. Made it able to print without support and added android logo on the body. See remixes…

1-Credit/Advancement Token - NISEI (Android: Netrunner)

After getting back into Netrunner (by roping in a friend) and buying NISEI's "System Gateway", I decided it was time for updated tokens. Thanks to the team at NISEI for keeping the game alive and I hope that the community enjoys this…

Android figurine

Cool little guy made by me in blender

Worx Landroid Wheel Cleaner with Rounded Handle

Works Landroid wheel cleaner with rounded handle for more comfort

Android Card Kit Ornament

I made this to send to friends and coworkers in 2020 as a way to lift spirits and strengthen the community. The Android is happily waving hello with a hanging loop on top for adding a hook. The sprews are fairly easy to snap by hand…

Android figurine

Figurine of the Android mascot, the Bugdroid.

Sci-Fi Armored Titan and Female Android Statue

A futuristic sci-fi statue featuring a massive armored titan walking alongside a sleek female android.

Lightweight Tablet Stand for iPad or Android Tablet

This lightweight tablet stand will support your tablet in landscape or portrait with or without the case on. I've tested with an iPad pro 11 inch and Android 10 inch tablet. I would suggest printing with the following settings: 15% infill…

Mounting piece for 7" myAI Carplay/Android Auto screen

Mounting piece for 7" myAI CJ-PTC208 Carplay/Android Auto screen. Use it as a starting point for further creation. I used it with 🚗 Replacement cd inserts for phone holders .

Worx Landroid Mähroboter Garage / Robotic lawnmower garage cheap and easy

Selbstbau einer Mähroboter Garage (Carport) für weniger als 20€ Materialkosten. Die Garage ist für den WORX Landroid WR165E und ähnliche Modelle zugeschnitten. Eine Anpassung für Roboter Modelle anderer Hersteller ist leicht möglich. Für…

Androide N°18

Figura de colección de androide N°18

Landroid distance tool

Simple replacement for the distance guide which came with my landroid Should be printed in PETG or ASA as its probably used out in the sun and PLA will warp if that is the case.

Android Clicker Fidget Toy

Design Concept I wanted a mechanical clicker but couldn't find any Android-themed versions, so I decided to design one myself! It seemed like the perfect character for the task. The model is fully modular, with the head, eyes, arms, and…

Android Keycap

Android Keycap printed with Black and Green

Update - usb-C dust cover for Android smartphones - easier to remove

slimer, better fit and easier to remove Improvment to my earlier design: https://www.printables.com/de/model/783667-usb-c-dust-cover-for-android-smartphones-with-ultr There are some usb-c dust protectors on printables but they were too…

Rad und Reifen für Landroid M500

Update: bei den Teckerreifen 5 gibt es jetzt eine linke und rechte Version. there is now a left and right version of the Teckerreifen 5. Hallo, ich habe uns ein Rad und separate Reifen konstruiert. Du brauchst dann in Zukunft nur noch den…

Android C18 figurine

A highly detailed collectible figurine featuring Android 18, the beautiful and deadly cyborg from the legendary anime series Dragon Ball Z . The model depicts her in a confident, alluring pose, sitting effortlessly atop a piece of…

Worx Landroid Anker Guide

Simple model for placing ankers for robot mower, designed for worx landroid side cut model (WR143E). Able to make other just request. All instructions are on the model, just print without support, simple as that. Should be printed in PETG…

Worx Landroid Brick Tray/Basket for WR147

Purpose: Designed specifically for the Worx Landroid robotic mower, this brick tray/basket aims to improve traction, ensuring smoother operation. Unique Feature: Its simplicity is its strength. The design is straightforward, making it…

Android Logo Model with Articulated Parts

Bring the iconic Android logo to life with this detailed 3D model! Featuring movable arms, legs, and a mouth that opens and closes, this design is perfect for display, play, or as a unique addition to your collection. he can sit and stand…

H96 Max Android TV Box Top piece.

I recently purchased the H96max tv box to use it for Klipper, i noticed that it idles at around 50ºc and i didn't like that, so i made this top piece with more openings and with a 40mm fan it doesn't overheat ot anything like that.…

Spikier Wheels for Landroid L2000 WR155E L Printable on a 220mm bed

Prevent the automower from digging ruts in your lawn. Printable on a 220mm square bed. This is a remix of a excelent design by polandmet so that it would print on my 220X220mm bed. https://youtu.be/YmMLucwmtG8 Each wheel prints in 4 parts…

Car dash mount for portable wireless CarPlay Android Auto

This mount was designed for the Westods Portable Wireless CarPlay and Android Auto unit. This will likely fit other of the 9.3" wireless head units on Amazon that are rebranded under other names. The mount is extremely solid and doesn't…

Worx Landroid WR147E.1 ( L 1000 ) 9-Fach Mähteller V1

Schichthöhe 0,16 ASA-X nur kein PLA wegen wetter Abdeckung befindet sich noch in der Testphase Bolzen müssen verklebt werden, aber nur auf einer Seite. Entweder am teller oder an der aufnahme. Benötigt wird : 8x m3 schmelzmutter und m3…

Worx Landroid

Worx Landroid modell Drucken mit Stütze Lh 0,2mm

Worx Landroid WR165E M500 Spoiler fürs Batteriefach (sehr flach)

Spoiler für Worx WR165E M500 mit Batteriefach. Der Spoiler wird hinten auf das Batteriefach geklebt. Ich hab es mit Heißkleber gemacht. Der Knopf für das Fach ist immernoch erreichbar mit einem schmalen Gegenstand. Der Spoiler hat nur…

Android: The Bot aka Bugdroid - 2023 Redesign Version

I couldn't find a non mesh version of the latest Google Android figurine so I created one myself, tracing from images found on the internet. Available for download is just the .step file I created. You will have to arrange it yourself for…

Rivian R1T/R1S dash mount for CarPlay/Android Auto screen, phone, or tablet

A very solid mount to go over the original display in the Rivian R1T and R1S, gen 1. I don't know if this works on gen 2 vehicles nor the R2, but would love to hear if someone tries it. It can go in the middle, or towards either end, and…

Android Bot

This is an Android bot I modeled using Onshape. Supports are definitely required for 3D printing.

Mount V2 for Carkool Portable CarPlay/AndroidAuto Display 10.26 inch

**Update ** - Added a shorter part 1 This is version two of my previuos model. Same as the original, it’s made with both my specific Carplay/AndroidAuto display and my specific car (1997 Toyota Tercel) in mind, so it might not work on…

USB CLEANING TOOL / USB-C CLEANING TOOL / CHARGING POINT CLEANER / APPLE / ANDROID

Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) USB CLEANING TOOL (PLEASE…

2023 Mazda CX-30 Center Console Phone Holder for Android/Apple car

I made this remix for using the included USB instead of the 12V adapter, so I can use it for Android Auto connection.

Worx Landroid M700+ Messerteller

Hier habe ich eine neue Version für den Worx M700+ erstellt. UPDATE: V2 Slim zum Download bereit Er hat nun 7 Messer die mit einem zweigeteilten Messerteller verschraubt werden. Diese Teilung habe ich gemacht weil es damit einfacher zu…

Androide Noel Navideña

Personaje generado con IA de Bulma con un traje navideño. Ideal para éstas navidades. En el archivo comprimido están todos los archivos .obj con las texturas

Grid Fillings Worx Landroid Ladestation

Die Ladestation der Worx Landroid-Modelle ist für Rasen ausgelegt, der durch das Gitter wächst. Liegt die Ladestation auf Stein / Beton, dann hat das Vorderrad Probleme beim Ausparken. Es muss über das grobe Gitter fahren und die…

Android 17 (DBZ)

Introducing the 3D printable figurine of Android 17 from Dragon Ball Z, crafted for enthusiasts and collectors alike. This model captures Android 17 in a daunting and serious pose, radiating the character's signature confidence and…

worx Landroid garage

Individuell gestaltete Worx robot garage. Schnell gut billig für den perfekten Unterstand .

Phone Stand for iPhone Standby Mode and Android

This 3D model is designed as a compact and convenient phone stand, perfect for use on a desk or nightstand. It’s optimized to support Apple’s Standby Mode, making it ideal for keeping your phone accessible and displaying useful…

Llavero Android con brazos articulados

Una vez impreso girar los brazos para que se sueltan las uniones que tiene con el cuerpo para que queden articulados. Necesita imprimirse con soportes. Si se desea, se puede añadir un texto o inicial fácilmente con el laminador…

Worx Landroid 3KG Dive Weight Housing V2

One of the best mods for the landroid for me. Gives it great traction. Used this for 3 years now Basic housing. Use 3M tape to attach to Landroid Fusion file included if you wanted to make it more fancy or to your taste. Link to weight…