2,089 models
UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…
Please check your roll size before printing. My roll diameter is about 10.6 cm. If this is to small you can rescale the model in the slicer program I recommend to set supports just under the free arms (use support-blocker at other parts)…
Print: I printed with PETG with 0.3mm and variable layer height (because of thread). A brim is recommended. Food safety: at own risk. Depending filament and print. Please let me know your experience. 2024.5.06: version without air…
This is the remix of the Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm) from @fivesixzero. This is a SLIM version - shorter printing time, less weight, slim design… but top quality stays untouched! :) Remixed Things I made few…
NASA Space coffee mug ( capillary cup ) enables drinking in zero gravity. Now we can all drink like astronauts. Also it is fun way of teaching kids about physics and space. If you want to drink from it make sure you treat it to be food…
🇺🇸 Welcome to Washington D.C.! Continuing with the project of recreating the National Mall in Washington D.C. for the MiniWorld3D catalog, here is the Capitol Building , heavily remixed and improved by Dany Sánchez from the original…
Cable Organizer for USB and other IT/computer Cables. Designed with a focus to optimize and reduce filament demand to the max. Very lean version for rapid an easy print. Easy to print with PLA or other remaining filament which is…
Ich habe hier einen Schleifpapierhalter für meine Baustelle konstruiert. Die obere Klemmplatte besitzt Noppen, welche sich durch das Schleifpapier bohren, welche den halt nochmals verbessern. Die Schrauben habe ich als Rändelschrauben…
It would be nice if you post your make. Thank you
Lean version of a USB cable holder prints of various hight are possible by just finish printing at the desired thickness. No support needed. PLA material used, 0.2mm resolution. 12mm printing height requires 9 Min. printing time @ 100%…
Remix of smysnk 's toe kick clip, modified to fit the metal CAPITA legs. Following the advice of some YouTuber, I used the metal CAPITA legs instead of the standard plastic SEKTION legs. The metal legs are very sturdy and great, but the…
Cette sculpture représente un lapin stylisé avec des lignes épurées et une esthétique moderne. Le modèle est conçu pour une impression en résine ou FDM, avec des détails fins qui capturent l'élégance du design minimaliste. Impression :…
Der Druck besteht aus zwei Teilen. Die Halterung Die Stange zum Abrollen Die Stange lässt sich ohne Kraft in die Vorrichtung legen, da sie etwas Spiel hat.
Une jolie boule avec un noeud et un sapin fleuri à l'intérieur? Vous pouvez l'imprimez en 2 couleurs, le noeud fait 1mm de plus en épaisseur. A mettre dans votre sapin, sur une fenetre, une porte, un mur, etc … Imprimez avec une hauteur…
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
Für die Grundkonfiguration mit einer Reserverolle sind folgende Modelle erforderlich: The following models are required for the basic configuration with one spare roll : 1 x Rollenhalter 1 x L-Form oben links 1 x L-Form oben rechts 1 x…
SD card phone holder for Škoda Rapid. It's design for my Xiaomi Mi 10T Lite. SD card slot in Škoda Rapid is perfectly located under infotainment into which this holder will be inserted. Recommended to use 100% infill and PETG.
Just add water. Notes: Print in PLA – although the ideal material would be Nylon The top reservoir is for reagent, and should stop flowing when it reaches the main branch, unless there is liquid in the main branch Use a paper towel as a…
This Wilkinson razor blade holder is your new secret weapon for precise, gentle scraping. Perfect for removing stickers, adhesive residue, and other debris from flat surfaces. Simple yet effective, it’s ideal for detailed tasks that…
Lo hice en PLA color madera para que haga juego con mi mesa de trabajo. Se fija a la mesa con dos tornillos en la parte inferior.
This stealthburner model includes the mounting of a Phaetus Rapid 2 Plus UHF hotend and a CPAP for cooling, retaining the possibility of also mounting the Canbus if desired
Portacelular inspirado en la imagen de Pedro Picapiedra (Fred Flintstone). Se imprime en 4 capas de los colores Rosado, Negro, Blanco y Madera. Por su diseño puede soportar una Tablet. Vea también a Vilma Picapiedra.
Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo
Portacelular inspirado en la imagen de Vilma Picapiedra (Wilma Flintstone). Se imprime en 5 capas de los colores : Rosado, Blanco, Rojo, Negro y Naranja. Por su diseño puede soportar una Tablet. Vea también a Pedro Picapiedra.
STEP-Modell leider nicht mehr gefunden
This is a remix of my capillary toy to create a color gradient in a simple, visible way. Most of the diffusion takes place in the paper towel, so this isn't really a mixing device. I'm interested in capillary-driven open-channel flow at…
sapin design pour décoration de table de noël
I made these letters for a cool wall-mounted Logo. Maybe you also have a use for said Letters (even though they are quite specific). Let me know if you'd be interested in having a complete Set of Letters of the Alphapipe Font.
Adapter_1,25_EYEPIECE_to_T2 (RECAPITULATION AND UPDATE) This model is a recap of the 1.25 eyepiece to T2 adapters that I have in printables, including the latest improvements.…
Etoile de sapin de noel - Christmas Tree Star
🇦🇷 Franco Colapinto Tribute Bust Fan-made tribute bust celebrating Franco's F1 Road Show exhibition in Buenos Aires. Features Franco with his characteristic mate, honoring Argentine talent and the excitement of bringing an F1 car to the…
The Urban Proof crate I had bought before my 3D printer time. I had mounted it with hard rubber pieces as spacers on a Racktime Snapit adapter . I replaced the rupper pieces now with mount plates. With the two new mount plates, the crate…
Chapa del Capitan América preparada en 3 colores para Prusa MK4 con MMU3
Amazon with decapitated head Amazzone con testa decapitata
Un petit piquet pour maintenir et signaler par exemple une rallonge électrique le temps de l'été. Je m'en sers aussi pour fixer une bâche, une corde… il est multifonction. Il y a 4 modèles : l'original le V2 : un peu plus long et plus…
De vorige wc houder had maar 1 vijs om hem vast te zetten waardoor hij steeds wat schuin ging hangen. Daarom een aangepaste versie met 2 vijzen. De muur waar hij tegen hangt is een Gyproc muur dus des temeer dat er 2 schroeven moesten…
This is a handy holder for lapidary dops, or any other stick-like object of consistent diameter which you would like to hold vertically. Models are provided for 0.25 inch and 6 mm dops. Start by printing the test standard fit file for…
Wiwaxia papilio is one of the most distinctive and debated fossils from the Middle Cambrian period (approximately 505 million years ago). Best known from the Burgess Shale in Canada, it represents a bizarre "evolutionary experiment" from…
lapin a lunette avec carotte pour les enfants très proche des animaux que j'ai créer sur TINKERCAD
I use Koh-i-Noor rapidograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that…
Abbott Covid-19 Rapid test stand A really solid stand for Abbott COVID-19 Rapid test. It's fit 5 vials It's really easy to print, I made it in PLA, layer height 0.3mm
Hier habe Ich eine einfach Abdeckung (Stopfen) für einen Tpilettenpapierhalter entworfen. Durchmesser der Stange ist ca 26mm.
Print instructions material: PET-G is strong enough, ABS would be better, NYLON is the best infill: 100% for PET-G suports: yes layer: max 0.2 mm Print all parts in horizontally, all layers must be in 90° to the longitudinal axis to avoid…
A three-part set for hand-building small espresso cups from rolled clay. How it works: Roll a sheet of clay to approximately 7 mm thickness. Use the strip cutter to cut the rectangular strip that forms the side of the cup. Use the base…
Wall-mounted gift wrapping paper holder. For storing wrapping paper rolls, or similar light-weight, roll-like things. Maximum diameter per roll probably around 5cm. Mounted via two wooden screws of size 3. Included are versions for 2, 3,…
Versieren van de tafel met Pasen. Decorando la mesa para Pascua. Décorer la table pour Pâques. Decorating the table for Easter. groetjes ludo
100x160mm sign featuring a chorus line of dancing rabbits. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frame , into which this and the rest of my sign collection fit.
his is a digital 3D printable model of an Anatomically Correct Human Skull based on a scan . This accurate skull replica is a perfect Halloween decoration, or simply a wall decoration/shelf display, cosplay prop, headphone holder… The…
Wall Mount Quick fastening system for panels and coverings - Sistema universale di Fissaggio rapido a Pressione Available in two models: Wms_1 - Wms_3 Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements…
Papiertuchhalter für Unterbaumontage Material: PETG Infill: Gyroid 30% Zum einfachen Anziehen der Schrauben verwenden Sie am besten einen Winkelschrauber Vorsatz auf dem Akkuschrauber. Wie zum Bsp. den Wolfcraft #4688000 Wenn dir mein…
Brr. Brr. Patapim, my hat is full of Slim. In the dense and mysterious forest, Lived a being most curious. With tangled roots and crossed legs, Thin hands and waving arms, His nose as long as a ham, A bit like a baboon, a bit like a bush.…
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
This is a modified version of packout hangers from blahblahblahresearch. I wanted these to have the recess for the charger's base feet to be 90 degrees from the original design and far less tall so that the charger is more stable in the…
Ich war auf der Suche nach einem modernen minimalistischem Papiertuch Halter für unsere neue Küche und habe nichts 100% passendes gefunden. Daher habe ich diesen Halter selber designed. Er passt für klassische Zewa Rollen mit einer Länge…
I remixed "The Capitol - Legislative" by MakerBot ( https://www.thingiverse.com/thing:461272 ) to combine the three separate pieces of the building into one large piece. It slices at 100% scale in Cura and fits on my Ender 5 without a…
I reimagined Michelangelo's David through a 3D project, complemented by a column with an Ionic-style capital serving as its base. This endeavor aimed to enhance the presentation and aesthetic appeal of the iconic sculpture. In…
The TerraPi Xtreme DUO is an open Raspberry Pi NAS case, featuring two HDD 3.5" slots . A set of USB3 to SATA external power adapters are required to connect the drives to the Pi. You can buy those from your local market, to ensure that…
I was making a modification to the EVA 2.4.2 toolhead that allowed the use of a Rapido UHF hotend. I tried to find a STEP model for it online but after ~30m of searching, I couldn't find the ultra high flow (UHF) variant as a model. I…
Meet Kapi, the king of laid-back vibes and quiet confidence. Whether he's hanging out on your shelf, Kapi brings peace wherever he goes. With his soft shape and zen attitude, he’s the kind of buddy that reminds you to take things slow and…
Für die Werkstatt habe ich einen Küchenrollenhalter kreiiert er wird mit zwei Spax in eine OSB Wand geschraubt. 20230711 “Möbelschrauben” feiner justierbar 20230723 Ikea Skadis hinzu 20230725 auch ohne Wabenmuster 20230729 Verschraubung…
The TerraPi EVO is a dual SSD case for the Raspberry Pi, that uses the 2.5″ sata SSD drives as the case, placing the Pi board between the disks. It comes only in dual SSD drive configuration. It utilizes the USB 3.0 port to connect a…
Capitan Amerika Pikachu
Imagine you can form a bigger pencil holder by putting these beehives🐝 together. How fun it is!😁 Features They can be put together to form a larger stationary holder on your desk. 3-4 pot level for different pens or stationery length and…
The "Full Extension, Rack and Pinion, Linear Rail" drawer, or FuExRaPiLiRa for short (it was originally going to be called FLDSMDFR, but that was taken - what are the odds!?). It's a drawer system that prevents the drawer from being fully…
It's highly versatile; you can use it as wall décor, table décor for the kids' room , or anywhere else. Use it for anything your mind can imagine. Hope you enjoy Hey everyone, first of all, it would mean a lot to me if you could download…
pince a cheveux en forme de papillon , impression et mise a l echelle selon vos besoins. possibilité de la thermoformer pour lui donner un leger cintre s imprime a plat sans radeau , simplement et rapidement
Adapter for mounting Racktime SnapIt v1 accessories on a Cube Acid RILink bicycle rack. A M6x25 countersunk bolt, nut and a correspondingly large washer are required for fastening. Consider it currently still under development, but it…
I wanted some free standing letters, so I used the Raleway font as a base, and expanded them to be 10cm high and 2cm deep. In addition, some letters have a curved base, which makes it difficult for them to stand upright, so I added a…
Adapter for Bic pencil with old style of pen to write Recommendations: Print with layer height 0.10mm Activate raft to avoid Glue both pieces together with craft glue Gcode is for MK3 printer, generic PLA and layer 0.10mm, brim 3mm…
Przedstawiamy starannie wykonany, gotowy do druku 3D model Kapitana Rexa, kultowego Kapitana-Klonów z uniwersum Gwiezdnych Wojen, znanego z ekscytującego serialu Ahsoka na Disney+. Ten zachwycający model 3D oddaje każdy misterny szczegół…
Portalápices con la imagen del juego Minecraft. La espada puede ser removida de su sitio o colocada en el. Dimensiones : Portalápices 8 x 8 cms. Espada : 9 cms.
These are replica SAPI plates to use with airsoft vests, weight vests etc. You can either leave them hollow to give only stiffness or fill them up(I used finishing sealant) to get some weight. The front/back plate is about the size M…
Hallo, ich habe diese Model entworfen. Es ist geeignet für jegliche Klopapier rollen.
Remixed Voron printhead for Phaetus Rapido v2 UHF. Extended fan ducts to specs in Phaetus model without lowering hotend.
Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…
Open Swords is a project that aims to make historical fencing available to anyone! The only tools you need to build one of these is a 3D Printer, a heat gun, and a screwdriver! With the settings below, and a 3/4in dowel from the hardware…
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Update : I'm going to leave this post up, but I would recommend AGAINST using my files for this mod. Instead use the github project below that is more complete.…
This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4. I tuned this for use with PETG, since that is mostly what I print in. But, I have tested it with some of the PLA filaments I have…
Please read the description to the end before downloading! This is a remix and redesign of the "Wrapping Paper Cutter, utility knife 2.0!", https://www.thingiverse.com/thing:5158937. I have a pack of 70mm long carpet knife blades, and I…
Decided to update the Stealthburner for the Rapido 2 UHF version. This is a remix of the amazing UHF mod by bythorthunder. (https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf) This…
This is only a STL file of Capitaine Bob HO scale workers for those that were unable to slice the 3mf file.
Lapicero con doble patrón voronoi Pencil holder with double voronoi pattern
Circle cutter for paper To cultivate Physarum polycephalum (aka The Blob) I need many round discs of blotting paper. With scissors this has been too cumbersome for me .... Printed in PLA, layer height 0.2. Color change: Halter.stl - 10.2…
Elegoo Rapid PETG Orca Slicer Filament Profile for Creality K1 Series. This is a profile that works with the Creality k1 series only.
I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…
HO scale dilapidated brick two story building. This is mainly meant to be used as a facade building. Use white tempera paint for a really great mortar effect.
Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…
velocidad 50mm/s altura capa 0.2mm ancho capa 0.4mm DON'T FORGET GIVE LIKE. THANKS!!!
This is a model of the Gaping Dragon from the first Dark Souls. I really like the design of this boss so I tried to print myself a copy. The model / mesh was posed using the bone function in Autodesk 3ds Max. The part where the wings…
This is my version of all-in-one holder for API Master Test Kit. Makes it much easier to store, test and compare the water colour. I will add a proper carry handle for the next version. Print with 0.2 layer height. No support needed.
I made a modification for the Rapido 2 UHF hotend that works with the Stealthburner front hood. This way, you don’t need to print a new front —you can use your existing one. I created an extended duct to improve airflow under the nozzle.…
