Search results: aple

Sort order

540 models

P
PrintablesJ&S Design

Voronoi Maple Leaf

Maple leaf with voronoi design. Can be used as a keychain, coaster under your cup, earrings or just as a home decoration. The leaf has a unique voronoi design similar to the drawing on living leaves. Suitable as an autumn or winter…

Print approx. €2.96–€3.61 excl. taxPreliminary estimate for one variant

Downloads
427
Likes
97
Rating
5
P
Printablesschneems

Customizable Ikea cart holster - Holds stapler, scissors + more (parametric)

Store your stuff This holster gives you a dedicated spot to hang stuff off your Ikea rolling cart. The design snaps on over the curved lip of the organizer cart and has chamfers, so the stapler (or whatever) slides in and out easily. The…

Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
13
Rating
0
P
PrintablesSpacekoaster

Staple Remover Replacement Handles

Hello, Here are some easy to print replacement handles for some cheap staple remover. Print them out of PETG (PLA is also fine, but not as durable), at your preferred layer height with 4 perimeters. Print 1x Up and 1x Down. Once printed,…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
13
Rating
0
P
PrintablesNovaDorium

Maple themed plant support for fall

I saw the contest posted today and figured now was as good a time as ever. I have no clue what I'm doing for this type of stuff but my girlfriend did need something like this for her flowers that seem to be leaning, I figured I could…

Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
10
Rating
0
P
PrintablesBlank

Toronto Maple Leafs Nylander coaster

Willliam Nylander #88 Coaster

Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
2
Rating
0
P
PrintablesBlank

Toronto Maple Leafs Matthew Knies Coaster

You can also flip it around if you don't want the build plate textured finish on the top surface. :)

Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
4
Rating
0

Kaple sv. Jana Nepomuckého

Kaple svatého Jana Nepomuckého Vznik: 1899 Na památku Jana Nepomuckého Generální vikář pražského arcibiskupa Později uctívaný jako svatý Mučedník katolické církve a později jeden z český zemských patronů

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
3
Rating
0
P

Nature's Helicopter - 2.5gm Maple Tree Seed Pod Quick Print

The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…

Downloads
6,599
Likes
1,829
Rating
4.66
P
PrintablesZiRo 3D

Maple Leaf

just a simple maple leaf model that you can use in your projects scale it, print it 👍 So have fun printing and please leave a like!

Downloads
1,473
Likes
46
Rating
5
P
PrintablesB3dprint

oak and maple leaf cookie cutter

oak and maple leaf cookie cutter

Downloads
1,397
Likes
142
Rating
4.83
P
PrintablesJohn S

Ford Capless Fuel Funnel

This is designed to work just like the standard Ford funnel. The geometry is very similar except I made the mouth of the funnel wider to help avoid spills. I also didn't see much value in the clip that is on the original. Print…

Downloads
1,276
Likes
106
Rating
5
P
PrintablesMighty Big Car

Milwaukee Packout Compact Organizer Insert For M12 Stapler

It holds the stapler very snugly to keep it from rattling around. Even so, you might want to glue a thin layer of foam to the bottom of the stapler pocket. Configured for a stapler with the belt clip on the left side; if yours is on the…

Downloads
1,220
Likes
159
Rating
5
P
PrintablesIoan Larionov

Foldable gas canister stand (Firemaple replica)

As I broke my Firemaple's stand, was looking for similar printable model, with no luck. It is designed close to original part. It should fold to fit inside the pot. Here some specs from their website: With the Canister Stand, it's easy to…

Downloads
815
Likes
123
Rating
5

Maple Leaf

maple leaf

Downloads
763
Likes
199
Rating
4.86
P
Printablesyoshindler

Maple leaf

im new to 3d printing and im trying some things on fusion360. BTW there is no hole on the one i printed but you can print it however you want

Downloads
689
Likes
39
Rating
5
P
Printablesluis-c465

Detailed maple leaf

The original site does not mention the license of the file, so I set the license as public domain.

Downloads
648
Likes
46
Rating
5
P
Printables626abad71b
18+

The source marked this model as adult content.

Downloads
612
Likes
180
Rating
5
P
PrintablesSusManufactory

"Autumn Bliss" — Designer Maple Leaf Pendant

Introducing the "Autumn Bliss" —a 3D-printed maple leaf pendant capturing the essence of fall. Its unique two-tone look, achieved by changing colors mid-print, mirrors the warmth of autumn hues. For optimal detail, print at 0.1mm layer…

Downloads
585
Likes
94
Rating
5
P
PrintablesTheodor

Maple leaf cookie cutter

This cookie cutter was made in tinkercad and than i printed it on my ender 3 from PLA plastic. If you want, you can check my profile for more cookie cutters :).

Downloads
564
Likes
74
Rating
5
P
Printablesqueaker

Bruder Linde Gabelstapler Zinken Ersatzteil / Forklift Fork Replacement Spare Part

Ersatz-Zinke für den Bruder Linde Gabelstapler 1:16. Nachgezeichnet nach 2D Scan. An der Spitze der Zinke einseitig verjüngt. Für die andere Seite bitte gespiegelt ausdrucken. Verstärkt. Passt besser als das Original. Auf den Fotos sieht…

Downloads
562
Likes
50
Rating
4.9
P
PrintablesIzzy0wlPrints

Maple Seed Helicopter Spinner - 1 Gram

Inspired from a real maple seed that blew on my patio one evening. Exactly the same size as the original seed. I tried different versions of the wing thickness and the more layers it got, the less it would spin requiring more height to…

Downloads
561
Likes
76
Rating
4.6
P
PrintablesMonfared

Canadian Maple Leaf Cookie Cutter

This model is designed to print well with PETG. in my tests I found PETG to work better for this than PLA since cookies stick to it the least and it's a bit more flexible. I printed it with 0.6mm nozzle and 0.2-0.3mm layer height. There…

Downloads
519
Likes
52
Rating
5
P
PrintablesDark Heaven

Voronoi Maple Leaf

This Voronoi Maple Leaf can be used as a key-chain or earring or just as a home decoration.

Downloads
496
Likes
184
Rating
0
P
Printablesreemo3dp

Molex Microfit 3.0 Extractor using Staplers (DIN 24/6)

A cheap and simple way to remove receptable terminals from a molex microfit 3.0 pin. Usually, you need a special tool from Molex , but a stapler does the job just fine. One side takes two staplers (DIN 24/6), one takes a single one. The…

Downloads
491
Likes
96
Rating
4.75
P
Printablespcwzrd13

Dreamcast USB Adapter Enclosure (USB4MAPLE by megavolt85)

A custom-designed enclosure for megavolt85's USB4MAPLE USB adapter for the Sega Dreamcast. You can find more info here . This build uses a Raspberry Pi RP2040 Zero and the controller connector from an extension cable. I used this…

Downloads
455
Likes
46
Rating
5
P
PrintablesMakerwiz

Canada Flag - Maple Leaf

This is the National Flag of Canada in official dimensions, converted to 3D by Makerwiz. The Maple Leaf was first raised in Ottawa on February 15, 1965, replacing the Canadian Red Ensign, our previous national flag. Since then, February…

Downloads
430
Likes
39
Rating
5
P
PrintablesElias

Gravitrax Schienenstapler

Stapler für 1er + 2er Gravitrax Schienen, passend auf die Grundplatte

Downloads
423
Likes
93
Rating
4
P
PrintablesAlwaysTinkering

Removable Fence Stake, Garden Stake, Landscape Staple

This is a removable Stake used for Gardens, fencing and other uses. It has a low profile knob so you can find it to remove it and hang it when not in use. It prints flat with no supports. I have provided several sizes, but you can modify…

Downloads
404
Likes
52
Rating
5
P
Printablespezliz

Fall Maple Leaves - HueForge

Original photos of fallen maple leaves make for a fun HueForge Experience! Play with colour and sizes to make a lovely array - I also used my heat gun to create some movement with the leaves. Maple Leaf 1 - Print at 100% infill with a…

Downloads
379
Likes
108
Rating
5
P
Printables29flo

Maple Leaf Shaped Tray [Set of 3]

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…

Downloads
363
Likes
77
Rating
5
P

Toronto Maple Leafs Logo

Toronto Maple Leafs logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more. Print at 100%…

Downloads
363
Likes
11
Rating
0
P
Printablesjamesgt

Removable Fence Stake, Garden Stake, Landscape Staple

Remix of https://www.prusaprinters.org/prints/71490-removable-fence-stake-garden-stake-landscape-stapl 30x90 without the head and text, 12 pieces.

Downloads
358
Likes
54
Rating
5
P
PrintablesKisssys

PEX Staple

I ran some PEX tubing from my shop to my office to supply air pressure. Mine is regulated to 30psi but their are a number of people on Youtube using air at full pressure, you can decide, if you do these are handy to hold the PEX in place.…

Downloads
355
Likes
42
Rating
5
P
Printableshawk🦉

Maple Leaf bowl

Maple leaf bowl.

Downloads
355
Likes
54
Rating
5
P
PrintablesTrailblazer

XShot MPP Barrel Shroud (No Logo + Gapless)

This is the barrel shroud by High Country Blasters, now logoless and with added tabs for a cleaner appearance. I printed mine with 4 walls and 15% gyroid infill. Printed at a 45° angle with the blaster-interfacing end in the air. Use…

Downloads
345
Likes
54
Rating
5
P
PrintablesWomacka

Maple leaf - javorový list

Maple leaf generated from picture. You can customize your size from the bigger model "maple leaf.stl".

Downloads
331
Likes
44
Rating
5
P
Printabless.mensak

Maple leaf

Decorative maple leaf, 5cm in size, 1mm thin. Feel free to scale. Print setting any filament 0.4mm nozzle (or smaller) 0.2mm layer height no supports default infill Additional models from series Oak leaf -…

Downloads
330
Likes
80
Rating
5
P
PrintablesHextra

Maple Valley - retail insert

This is an insert for Maple Valley, a Creature Comforts game based on getting ready for the big Spring Festival. The game has a bunch of resource tokens and cards, and this insert is aimed at getting everything out of the box quickly and…

Downloads
303
Likes
29
Rating
4.67
P
PrintablesFC2M3D

Maple Leaf Keychain

Easy to make a Maple leaf keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
301
Likes
32
Rating
0
P
PrintablesWhale500

Maple Leaf Cookie Cutter

Maple Leaf Cookie Cutter An easy to print and fun to use maple leaf cookie cutter. It features a tapered thin edge for making clean cuts with the dough. The cutter also has a wide face making it comfortable to use. Printing Nozzle - 0.4…

Downloads
298
Likes
36
Rating
0
P
PrintablesMr V

MFD Crossbow Mini AAT Mount for HDZero, Walksnail, SIYI HM30, Maple Wireless and Triple Feed Patch Antennas

Here is another tripod mount for the MFD Crossbow Mini AAT. This one you're able to use either the SIYI HM30 video link, HDZero VRX, or the Walksnail VRX. I made the HDZero and Walksnail VRXs slide in type mounts. The HM30 uses a ¼ 20…

Downloads
297
Likes
11
Rating
0
P
Printablesbaztm

Printable Castel Nuovo (Maschio Angioino) Naples

An easy printable model of Castel Nuovo (Maschio Angioino) in Naples, Italy. I designed this after finding scans that are too detailed, won't print right or don't quite fit the style I was going for. Prints well on the Prusa MK4 - no…

Downloads
291
Likes
37
Rating
5
P
PrintablesTodd Melanson

Toronto Maple Leafs Keychain

Toronto Maple Leafs Keychain, Will 2023 be the year they make it out of the first round??? Printed on an Ender 3 S1 Pro with Sonic pad running the normal profile for Ultimaker Cura

Downloads
287
Likes
10
Rating
4
P

Maple Leaf Candy Dish / Decorative Bowl

The fall season inspired this maple leaf shaped candy dish / decorative bowl. It measures about: 170mm x 150mm x 40mm or 6.7" x 5.9" x 1.6" Default slicer settings + a brim works well. I found the brim to be necessary because of the thin…

Downloads
280
Likes
87
Rating
4.5
P
PrintablesShowcase

Gridfinity staples storage

This is a storage bin for your spare staples, 2x1, stackable. holds up to 40 strips of staples.

Downloads
273
Likes
41
Rating
5
P
PrintablesLeHa Design

Cardboard Stapler

To fix two cardboard pieces together. I cut a V shape on my laser cutter, find the measurements for the cutout in the pictures. Video in action: https://youtube.com/shorts/q-hNIi5E2L4?feature=share

Downloads
266
Likes
71
Rating
4.5
P
PrintablesTom Dalton

Gridfinity Stapler holder bin

Gridfinity bin with a slot for a stapler I got at tesco and storage for staples and/or other office supplies. 2x4 Gridfinity cubes wide 1.5 cubes tall Printed with PLA, supports on for magnet holes, 10% infill (I'd up it to 20% as I had…

Downloads
261
Likes
34
Rating
5
P
PrintablesCaptAngry

2023+ GMC Canyon/Chevy Colorado Capless Fuel Cap

With driving on a lot of muddy, dusty, and snowy roads I wanted a way to keep junk off the capless fuel filler. I drew this up in Fusion360 and printed it in TPU. The cap slips over and the holder uses a small piece of double sided tape…

Downloads
259
Likes
27
Rating
5
P
PrintablesMAKERTEAM®

Forklift Keychain (Gabelstapler Schlüsselanhänger)

This is a remix of 3Ddys Forklift keychain . It was extended by a litte horizontal bar (see pics) to avoid that the forklift spins arround when carriing. If you like it please do not forget to give 3Ddy a like, too. Thanks! Material: PETG…

Downloads
255
Likes
43
Rating
5

Maple Leaf Dish - Naturals Collection (Flat Bottom)

Enjoy these realistic and useful leaf trays to keep you organized and bring a little nature into your life! Scalable. Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Downloads
247
Likes
71
Rating
0
P
PrintablesMSscribbles

maple seed toy

This is quick to print and easy-to-play toy! How to play: try to throw it away holding the biggest blob on the print (that's where the maple seed should be) and throw it away from yourself and in a couple of minutes you would be rocking…

Downloads
246
Likes
41
Rating
4.5
P
PrintablesJojo

Gravitrax Grundplattenstapler

Mit diesem Teil zwischen 2 Grundplatten(siehe Bild) halten diese perfekt aufeinander.

Downloads
244
Likes
48
Rating
5
P
PrintablesTxuky

MapleSnowBall

MapleSnowBall The " MapleSnowBall " is a decorative element to hang, designed to be printed by separate pieces with recycled Pla and then painted or to be printed with a color change, in three colors. It is prepared to be printed…

Downloads
239
Likes
75
Rating
4.5
P
PrintablesBen Zoe Bell

A5 Cover for Disc Binding systems (Atoma, Levenger, Staples Arc etc.)

Basic cover for A5 sized disc-binding systems. You can use your favourite modeling tool to emboss something into (or through) the cover for specific designs. This is just a basic core template.

Downloads
231
Likes
26
Rating
5
P
PrintablesMakerwiz

The Maple Leaf Forever

"The Maple Leaf Forever" is a Canadian patriotic song written by Alexander Muir in 1867, the year of Canada's Confederation. The modern lyrics were written by Vladimir Radian, winner of a CBC Radio contest, in 1997. Michael Buble sang a…

Downloads
221
Likes
39
Rating
5
P
PrintablesSteveJohnsen

Staple & Brad Nailer Non-Marring Tips (Central Pneumatic & Banks Brands)

These two objects are non-marring feet or tip attachments that are placed on the tip of the Central Pneumatic 2-in-1 pneumatic air 18 Gauge stapler/brad nailer (SKU 68019, 61661, 63156 & 64269) and the Banks 18 Gauge Air Brad Nailer (SKU…

Downloads
218
Likes
19
Rating
5
P
PrintablesMakeRepair44

Pièce pour agrafeuse / Part for stapler (Rocafix ES130)

Pièce pour agrafeuse Rocafix ES130/ Part for stapler Rocafix ES130 Category: Replacement Parts

Downloads
217
Likes
0
Rating
0
P
Printablesmentalflossed

Sy's Peglock - Staple Gun Holder

A staple gun holder for pegboards using Sy's Peglock system. This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts…

Downloads
210
Likes
23
Rating
5
P
PrintablesTETYY_

maple leaf napkin ring

Diameter of 31mm if it is too small take another scale Printer: Ender 3v2 Resolution: 0,2mm Supports: No Rafts: Doesn't Matter Infill: none

Downloads
209
Likes
77
Rating
5
P
PrintablesBetawolf

Maple leaf ice hockey mouth guard

I printed it in three pieces, since I did not own one of these brilliant multi-filament switching devices … yet. But it should be possible to run it on a Prusa with MMU. You do have to adapt the design to accommodate this, though.…

Downloads
207
Likes
6
Rating
0
P
PrintablesSketch Me To

Staple Gun Holder for French Cleat

Staple gun holder with build in staple storage compartments for staples Works with Most staple gun styles - Videos of my designs and assembly can be found on my Youtube - HERE Designed for (18mm) 3/4" French clear but easy to adapt by…

Downloads
202
Likes
50
Rating
4.5
P
PrintablesNusel

Duplo Gabelstapler Forklift

Den kleinen Duplo Lader in einen Gabelstapler umwandeln! Alles was man dazu braucht ist eine kleine weisse Leiter. Zwei Versionen: - komplett - geteilt ( erfordert 4x M3x5 Schrauben), leichter zu drucken…

Downloads
199
Likes
46
Rating
5
P
PrintablesAdam

Compact staple remover

Here is the CAD file . Using it is quite simple. Just push like you see in the video with slight wiggling. Then you can just pull out the staple.

Downloads
189
Likes
47
Rating
4.25
P
PrintablesMERoy

NHL Toronto Maple Leafs Coaster

5 mm coaster, 10x10 cm square. Prints in two colors, works great if you're equiped for dual color layers. I recommend printing face down to have better feeling and smoothness of the coaster. I printed it in PLA with 0.4mm nozzle diameter.…

Downloads
178
Likes
12
Rating
5
P
PrintablesBob

Toronto Maple Leafs Hockey Puck

This is a really fun Toronto Maple Leafs hockey puck that you can display in your home or even play hockey with! Print Settings Rafts: No Supports: Yes **Resolution:** any Infill: 20-40% **Filament:** any pla/any black and blue Category:…

Downloads
177
Likes
13
Rating
0
P
Printablesgordondevon

Toronto Maple Leaf Coaster

Toronto Maple Leaf Coaster

Downloads
175
Likes
9
Rating
0
P
Printablesdodasch

Playmobil Gabelstapler Zinken Ersatzteil

Ersatzteil für einen alten Playmobil Gabelstapler.

Downloads
173
Likes
20
Rating
0
P
PrintablesBamingo Design

Maple Leaves Bookmarks

A minimal maple leaf pattern designed to bring seasonal warmth to your pages. No AMS/MMU required, only one color change. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with White…

Downloads
169
Likes
44
Rating
5

Mini Maple Leafs – Fall Decor Pieces

Mini Maple Leafs – Fall Decor Pieces These are small maple leafs designed for decoration . Perfect for autumn-themed setups, DIY projects, table decor, or photo backgrounds. Each leaf features fine details and a clean, minimalistic look —…

Downloads
163
Likes
37
Rating
0
P
PrintablesPrintVision

Maple Leaf Bowl

A stylish bowl in the shape of a maple leaf – perfect as a small tray for keys, jewelry, snacks, or simply as autumn decoration. 🛠 Print Info Supports required (see slicer preview) Prints in one piece Recommended size: 120–150 mm width…

Downloads
162
Likes
41
Rating
0
P

Maple Leaf

This is maple leaf made of PLA. G-code files attached are prepared for Pusa MINI+ combining PLA and PETG filament.

Downloads
162
Likes
23
Rating
5
P
PrintablesaHumanPerson

Coaster with Toronto Maple Leafs logo

I wanted a Maple Leafs coaster, but I didn't want an MMU design. This changes colour by layer in your slicer instead, so us commoners have a good looking design. I also edited the logo so it looks extremely clean when printed. Enjoy!

Downloads
152
Likes
10
Rating
5
P
Printables3DCustomPrint

Maple Leaf

Maple Leaf This leaf was printed with PLA ( Filaprint Leaf Green) the shape was achieved by dipping the part in warm water and deforming and holding under cold water to retain the shape. Category: Models

Downloads
150
Likes
26
Rating
5

Notos Magazine holder (CARM, Maple, Mine)

Use a M3x10 flathead to secure to rail. Optionally 3 3x2mm magnets. I have uploaded the STEP file if anyone wants to remix.

Downloads
148
Likes
16
Rating
0
P
PrintablesDan_Mc

GM Diesel capless filler plug

Went to fill my DEF tank the other day and stuck the DEF nozzle right in the cap-less filler for diesel fuel. Fortunately, I caught myself before I was forced to learn an expensive lesson. I thought a plug to go in the capless filler hole…

Downloads
148
Likes
16
Rating
0
P
PrintablesMakerwiz

Canada Flag - The Maple Leaf @ 60 (Diamond Jubilee) | Drapeau du Canada - L'Unifolié à 60 ans (Jubilé de diamant)

To show off our Canadian Pride, we designed a diamond cut version of the World-Famous Maple Leaf with 60 facets to celebrate the 60th Anniversary (i.e., Diamond Jubilee) of the National Flag Day of Canada. Each side of the Maple Leaf…

Downloads
147
Likes
31
Rating
5
P

Toronto Maple Leafs Oversized Necklace Logo

Toronto Maple Leafs Oversized Necklace Logo that I designed. I hope you enjoy!

Downloads
146
Likes
6
Rating
5
P
PrintablesNene79

Blue Jays Chains with maple leaf 3d out

Created the Blue Jays chain with the Maple Leaf sticking out for a cool effect.

Downloads
145
Likes
11
Rating
5
P
PrintablesIsi8Bit

Pinnaple time

You can printed and other colors and maybe will look better! Print instructions Printer Brand: Prusa Printer: [i3 MK3] Rafts: No Supports: No Filament: Hatchbox PLA Copper

Downloads
144
Likes
27
Rating
5
P
Printablespolymatt

Chaplet Halikan LA-30A Reproduction Case

This model was created as a replacement due to the original being destroyed in shipping. You can watch the full process - including finishing - in the following video. Enjoy!

Downloads
143
Likes
52
Rating
0
P
Printablesthenickdude

Air scoop for Mecaplex canopy window

This is a replacement air scoop which suits Mecaplex aircraft canopies (like the one on our club's Twin Astir and Hornet gliders). All three STLs can be printed with the same settings: Filament: Transparent PETG. Avoid PLA because it will…

Downloads
142
Likes
4
Rating
0
P
PrintablesStigern

Mapleknoll Cottage

Mapleknoll Cottage – A Whimsical Woodland Home Tucked away in the heart of an enchanted grove, Mapleknoll Cottage is the perfect print for anyone who loves cozy fairytale vibes and detailed miniature architecture. Some supports are…

Downloads
139
Likes
33
Rating
0
P
Printablesblackjackbender

Staple Gun Holder - Wall Mounted

Wall mounted staple gun holder that attaches with two screws.

Downloads
137
Likes
14
Rating
0
P
Printablesjcgoette

Nailer/Stapler Wall Mount

A little too-designy, but functional, wall mount for nailers/staplers/etc.

Downloads
136
Likes
18
Rating
5
P
PrintablesPeter C

Golf - Golf Ball Stencil - Insert - Tree - Maple Leaf - Marker

The Moose Head golf ball stencil insert provides a fun marker friendly logo that stands out on any golf ball that works with the PrintSphere Golf Ball Stencil Holder ( hinged or unhinged ) or the Golf Ball Spray Paint Stencil Jig .…

Downloads
134
Likes
12
Rating
0

Staple, chain link

Detachable staple or chain link with a strong connection I tried different tolerances of the connecting part for printing the staple, I gave 0.15mm, after printing, the parts must be carefully loosened and moved, even the retaining rings…

Downloads
132
Likes
49
Rating
0
P
PrintablesMartin

Hot staple plastic welder storage box

Box model itself is based on Michal Fanta's amazing storage boxes system. Please refer to it to source additional hardware. Please note the box dimensions are 248x234 mm, so you'll need corresponding 3D printer bed size.

Downloads
127
Likes
18
Rating
0
P
PrintablesOliver Deleuran

Milwaukee M12 BST Staple gun - 3D SCAN

Milwaukee M12 BST Staple gun - 3D SCAN

Downloads
127
Likes
13
Rating
0
P
PrintablesTwirlygrlandMom

Maple leaf earrings - fall foliage, leaves, oversized greenery outdoors nature earrings with hole for post

Fun dangling earrings with oversized maple leaves. Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to make earrings or necklaces: We like this set…

Downloads
127
Likes
31
Rating
0
P
PrintablesDlteck2000

HSW stapler

Stapler holder for the Honeycomb Storage Wall

Downloads
124
Likes
18
Rating
5
P
PrintablesBotannik

Fully Printed Staple Remover

Best printed in a strong material such as PETG but I have printed in PLA and it works just fine. Print with a low layer height to keep the teeth from breaking. To use you slide the outer teeth under the staple as shown in the picture,…

Downloads
124
Likes
34
Rating
5
P
Printablesdanny6869

Toronto Maple Leafs Coaster

Toronto Maple Leafs coaster sized 11cm x 2mm. Perfect for printing with a multi-color system like the Bambu AMS (included .3MF build plate). The main coaster is 2mm, but I raised all of the colored sections by 0.05mm just to allow easy…

Downloads
122
Likes
9
Rating
0
P
PrintablesSkwiggums

Skwapler (Captain Slug Stapler Remix

The Skwapler is a remix of the grip and body panels from Captain Slug's stapler gryphon, adding holdster support and a grip which can contain a 950 mAh 3S battery. The Skwapler uses a manual pusher and dual stage trigger with a cherry…

Downloads
118
Likes
35
Rating
0
P
Printableschris

ryobi staple gun holder 18g

holds my staple gun check photo for model number. print with pla+

Downloads
118
Likes
21
Rating
0
P
PrintablesPeter Farell

Maple Leaf

Maple Leaf.

Downloads
117
Likes
28
Rating
0
P
PrintablesPrint@Hive

Maple Leaf Coaster

Maple Leaf Coaster Bring a warm touch of autumn into your home with this elegant Maple Leaf Coaster . Its clean geometric lines and leaf-inspired silhouette make it a perfect decorative piece for your table, desk, or coffee corner. The…

Downloads
116
Likes
37
Rating
5
P
PrintablesEduGomes

Maple Leaf Cookie Cutter - internal details

Maple Leaf Cookie Cutter - internal details Made it for my wife, didnt test yet on kitchen. Category: Kitchen & Dining

Downloads
116
Likes
8
Rating
4.5
P
PrintablesJohn Walker

stapler

stapler

Downloads
116
Likes
3
Rating
0

Staple, chain link

Detachable staple or chain link with a strong connection I tried different tolerances of the connecting part for printing the staple, I gave 0.15mm, after printing, the parts must be carefully loosened and moved, even the retaining rings…

Downloads
115
Likes
38
Rating
0
P
PrintablesJoseph

Gridfinity Stapler caddy

Holds a stanley bostich stapler

Downloads
115
Likes
14
Rating
4