Search results: arrma

Sort order

314 models

P
Printables3D color print

Arrma Outcast 6s - Bumper and Front Skidplate

Bumper printed with CPE HG100 from fillamentum PrusaSlicer has a fillament preset but you can only see it with: “Original Prusa i3 MK3S & MK3S+ MMU2S Single” you need longer screws M3x30 M4x16 Zunge and Skidplate PETG Prusament

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
8
Rating
0
P
PrintablesPaul C

Arrma Shim for Axels 2.3MM for 3MM shaft

These are small shims that always seem to disappear and are hard to find to replace. Take less than a minute to print and match the Aroma original well. 2.3MM thick and made for 3 MM shafts

Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
13
Rating
0
P
Printablesthe guy

Arrma grom trailer hitch

You can now pull trailers behind your car. You will need your own nut and bolt. works very well.

Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
3
Rating
0
P
Printablesclarktheshark

Arrma RC car wall hanger

Should work with many other models of RC car but i can confirm for sure it works on Typhon and kraton 6s models. You'll wanna use drywall screws and anchors. This seems to work totally fine with PLA and 3 walls. Havent had one break even…

Downloads
901
Likes
98
Rating
5
P
PrintablesJRosello

Arrma RC car wall hanger Remix

Simply remixed this wall hanger to free some material in the central part. The original one: https://www.printables.com/model/298079-arrma-rc-car-wall-hanger Print setttings: PLA // 205C // 65C // 4 perimeters // 20% Gyroid infill // No…

Downloads
732
Likes
118
Rating
5
P
PrintablesGeddysburg

Arrma Kraton 6S V6 - Wing Mount

This took a while and a lot of filament to get right, and I’m posting it for free. If it has benefitted you (OEM wing mount is $17!), please consider posting a make or buying me a beer to say “thanks guy!”. Anything is much appreciated.…

Downloads
575
Likes
54
Rating
5
P
Printableswehrenseb

Rear Mudflaps for Arrma Kraton 6s RC Truggy

Arrma Kraton 6s Rear Mudflaps These mudflaps fit beautifully on the rear control arms of the Kraton 6s with the existing screw holes (you need to put a little longer screw into the hole which connects the stabilizer rods ) I printed them…

Downloads
500
Likes
51
Rating
5
P
PrintablesBenLandel

Stand for 6S Arrma differential

With my kids playing around the workshop, the risk of an impact on the workbench is very high. This simple stand prevents the differential of 6S Arrma vehicle from tipping over while doing maintenance, when you fill it and let it rest for…

Downloads
468
Likes
54
Rating
4.9
P
Printableswehrenseb

1:8 RC Car Shock Stand Refill Jig for Arrma

Use this jig to hold the shocks of your 1:8 RC Car while you refill them and let the bubbles rise :-)

Downloads
390
Likes
62
Rating
5
P
PrintablesIatraliptes

Arrma Notorious, Outcast 6S RC Car Wall Mount

Why? I needed space under the stairs :-) This is the third model in a series of wallmounts I published and am willing to publish in the future. Features: Stable wall mount to grab the front inferior wishbones Rc cars suspension locks the…

Downloads
389
Likes
46
Rating
5
P
PrintablesKeks_gxo

Arrma Kraton 6s EXB arm front

This is a 1:1 replacement for the ar330656, Arrma Kraton 6s EXB heavy duty front suspentioonarm

Downloads
384
Likes
37
Rating
0
P
PrintablesEndersen

ARRMA Logo Multicolor

ARRMA Logo Multicolor

Downloads
378
Likes
43
Rating
5
P
PrintablesplationiX

Upgraded Mudguards for Arrma Kraton 6S (V6) EXB

I designed these improved mudguards for the Arrma Kraton 6S (V6) EXB. They also fit other models, such as the Outcast 6S EXB — I use the same set on both. The original design I tried was too fragile for my needs, so I modified and…

Downloads
343
Likes
33
Rating
5
P
PrintablesDžino

ARRMA Kraton 6S Rear Mud Flaps

ARRMA Kraton 6S Rear Mud Flaps, 3D print PETG Prusament or Carbon fiber 1,5mm created by dzino

Downloads
343
Likes
23
Rating
0
P
PrintablesLarry Kalis

Arrma grom Drift, road, pin tires

All Arrma Grom tires can be printed with supports only on the build plate. Drift tires printed in PLA will be the most slippery. Print the road tires in TPU for better traction, though they remain quite slippery. Pin tires can be printed…

Downloads
314
Likes
26
Rating
0
P
PrintablesLeon

Arrma Big Rock Überrollbügel

Überrollbügel für Arrma Big Rock

Downloads
304
Likes
21
Rating
5
P
PrintablesNorman Barksby

Arrma Mojave Grom 30 mm Fan mount

I wanted to mount and not just double sided tape a 30 mm fan in my Mojave Grom since they are know to overheat.

Downloads
298
Likes
24
Rating
5

Skidplate Arrma 6S

Das Skidplate passt auf mehrere Arrma 6S Modelle (Typhon, Karton, Limitless,…). Ich habe das Skidplate so konstruiert, dass möglichst wenig Einschraubtriefe des Gewindes verloren geht.

Downloads
296
Likes
43
Rating
0
P
PrintablesSnail

Arrma Senton 3d Scan (body)

Arrma Senton 3s Blx body 3d scan.

Downloads
273
Likes
22
Rating
0
P
PrintablesPureDeath

Arrma Infraction Rock deflector/ Wheel wells

Please share the link back to this thing when you share your builds! Its part of the attribution license I shared this under, Thank You! Side skirts fit on a cr-10 size bed, wheel arches fit on smaller printers. Split skirts coming soon…

Downloads
252
Likes
30
Rating
5
P
PrintablesAlcore23

Paddle Tires and Rims for ARRMA Typhon Mega

Paddle Tires and Rims for ARRMA Typhon Mega. Wheel hex size: 17mm Tires printed with Overture TPU Black. 0.20mm SPEED. 5% Infill (Increase if you need or want a more rigid tire). No supports needed. Rims printed with Polymaker PLA Pro…

Downloads
243
Likes
39
Rating
0
P
PrintablesRifester

Arrma Grom Typhon Servo Arm

***Updated - The last version was flawed. This one should be a lot closer to the original. You have to put the arm on first, then a tiny spring, and then the screw. I'm not sure if it will hold up over time, but for me, so far so good. If…

Downloads
242
Likes
29
Rating
5
P
PrintablesGavin

ARRMA Infraction Dirt Guards

Dirt guards for the ARRMA Infraction. You lose 2mm of travel and can put a 2mm spacer on the shock shaft to limit it if you want. No supports required. You will have to mirror the parts in your slicer to print the right side.

Downloads
241
Likes
26
Rating
0
P
Printablesaless

arrma 3s Front Steering Hubs

ARRMA Front Steering Hubs

Downloads
232
Likes
30
Rating
5
P
Printablesgoofyman23

Arrma 35mm Fan Adapter Plate and Cover

I wanted to be able to run a high speed pinion without the need to replace the entire motor heatsink. This is currently on my Fireteam using the stock Spektrum FIRMA 2050KV and 15t gear. The plate is printed in ABS and attaches to the…

Downloads
229
Likes
21
Rating
5
P
PrintablesQrome

ARRMA Syle Retainer Clip RC Car Shell

This is the R-Clip or retainer clip with a retaining tab that mounts into a 3mm hole in the body of the car. This is similar to the ARRMA body clips. Printed with TPU: https://amzn.to/3YqlCrc Flexible filament required. The hole is 1.2mm…

Downloads
212
Likes
48
Rating
4.5
P
PrintablesMuxoid

Arrma Outast 4S Drive Shaft (ARA311065)

I have designed a drop-in replacement of the Arrma outcast drive shaft (ARA311065) I think it is a stronger design as it is not hollow and is cheap to make if you have a 3D printer. I have tested it on multiple materials and layer…

Downloads
206
Likes
15
Rating
0
P
PrintablesGeddysburg

Arrma Typhon Grom - Honeycomb Street Bumper

UPDATE 1/8/25: It appears I uploaded the older version of this bumper. There is a newer version that has been reinforced with more connective material towards the flex point that should prevent any eventual tearing. This is now uploaded…

Downloads
203
Likes
25
Rating
5
P
PrintablesChris

Arrma Gorgon - Hobbywing Quicrun 10BL120G2 ESC Mount

This is a mount for a Hobbywing QuicRun 10BL120G2 ESC to be mounted in the stock ESC mounting holes for the Arrma Gorgon. Using the Stock mounting holes for the ESC this mount will allow the Hobbywing QuicRun 10BL120G2 to mount into the…

Downloads
202
Likes
18
Rating
0
P
PrintablesMufFiNzS

ARRMA 6s EXB Talion & Outcast Bumper spring ARA320628

This was made with the intention to printed out of 95a TPU with an infill of 100%. Just in case you want to use a different filament then TPU or have a softer spring, The one without supports in the middle might work better. Special…

Downloads
187
Likes
21
Rating
0
P
PrintablesGonzoStrange

35mm replacement fan blade Hobbywing Max6 / Arrma

35mm replacement fan blade for Hobbywing Max6 and Arrma 35mm fans I made this a complete replacement vs a slide on design because I wanted the maximum amount of blade. A few millimeters matter when you need maximum cooling for something…

Downloads
184
Likes
13
Rating
0
P
PrintablesPrinter

Extended Battery Tray for Arrma Outcast 8S

This model is for the left side. Use your slicer's mirror function to replicate for the right side. I recommend using an impact-resistant filament like PETG, PC, or nylon. Print with supports. High wall count and high infill. This design…

Downloads
180
Likes
13
Rating
0
P
PrintablesXalies

Twist lock clipless Arrma Typhon Mounts (+ Universal RC Version)

Set of clipless mounts that will fit a Arrma Typhon 6s. Not perfect but they were a quick design and seem to work fine. They simply just push and twist into place. The rear mounts just are a drop in replacement. I wasn't sure how these…

Downloads
179
Likes
23
Rating
0
P
PrintablesMike81622

Arrma Mini Kraton Rear Wing Protector

TPU rear wing protector for the Arrma Mini Kraton, to give the wing a little extra protection from getting knackered when landing upside down. The geometry is pretty much spot on, as you can see in the last pic where I printed test pieces…

Downloads
178
Likes
23
Rating
5
P
PrintablesLu123

ARRMA Vorteks rear mud guard

Need to drill two holes on the stock side shield to attached, or just glued.

Downloads
165
Likes
23
Rating
0
P
PrintablesGeddysburg

Arrma Kraton/Outcast 4S V2 Mud Guards

I recreated these mudguards based off a set I purchased, with some small tweaks and added Arrma branding. The Arrma ‘RR’ model was borrowed from https://www.printables.com/model/114281-arrma-logo-multicolor You will require 6 screws to…

Downloads
163
Likes
16
Rating
5
P
Printablesbutch708

ARRMA Talion Desert Mod

Arrma Talion v3 Desert Mod (other models possible, not tested) Here I present you my modded Arrma Talion. For this mod all you need is the Reely RE-5690550 Cage, some m3 screws for assembly, the linked files and a low profile wingmount…

Downloads
162
Likes
39
Rating
5
P
PrintablesMike81622

RC Car Wall Mount 170 mm / 6.7 inch Tires (Arrma Kraton 6S, Outcast 6S, Notorious 6S ...)

Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 170 mm / 6.7 inches. I made the bracket for Arrma 6S Trucks e.g. Kraton 6S, Outcast 6S, Notorious 6S, ...…

Downloads
154
Likes
20
Rating
5
P
PrintablesKeks_gxo

Arrma Kraton 6s EXB heavy duty shockrodend

!!!DO ONLY PRINT IN VERTICAL POSSITION!!! otherise they won't get perfect because they will sag. Also , choose the thinest layer hight and if possible print one at a time so you get the best quality. 100% infill is necessary These are…

Downloads
153
Likes
28
Rating
0
P
PrintablesChris

Arrma Gorgon - 35mm Fan Adapter mount

This is a 35mm adapter mount to be mounted into the fan location on the Arrma Gorgon. Using the stock mounting holes intended for a cooling fan on the Arrma Gorgon, this mount will allow you to mount a 35mm fan to the existing mounting…

Downloads
153
Likes
14
Rating
0
P
PrintablesGonzoStrange

The Last Arrma Mojave bumper mount

Front and rear bumper mounts for the Arrma Mojave. These should only be printed in a flexible material like TPU.

Downloads
151
Likes
26
Rating
0
P
Printablessquirrelf3d

ARRMA 40mm Motor - 4010 & 4020 dual fan mount (for RC cars)

For a ARRMA 40mmØ motor (62mm long) fan mount used in some remote controlled cars. dual 4010 and dual 4020 mount Print should not need any print support. PETG or better for the clip part, since I assume it's on a hot motor. Clip itself is…

Downloads
148
Likes
30
Rating
0
P
PrintablesBizkit83

Arrma Notorious Mudguard

Mudguard for Arrma Notorious 6S v5. For the other side mirror this file. You can mount thin mudguard with cable ties or screws.

Downloads
148
Likes
10
Rating
0
P
PrintablesDeeps

Arrma Infraction, Limitless and felony GNSS mount relocator

This mount is for the SkyRC GNSS rear shock tower mount. It allows you to run the mount backwords and have it put between the rear diffuser mounts to keep CG as low as possible for speed runs.

Downloads
146
Likes
17
Rating
0
P
Printablesfermit

Arrma Typhon Grom bottom protection

When jumping with the Arrma Typhon Grom the bottom hits to ground, causing some severe use and tear. These pieces are to be mounted on the bottom front and rear, over the existing piece. Just undo the 4 screws and mount this with them.…

Downloads
144
Likes
21
Rating
5
P
PrintablesSpongeinside

Car stand for Arrma Grom Mojave

I've made this small car stand for my 1/18th scale Arrma Mojave Gromblx, to keep the wheels off of the ground (to prevent flat spots while the vehicle is stored away and as a display and work stand. Other Arrma vehicles on the same…

Downloads
142
Likes
6
Rating
0
P
PrintablesReese Boisse

Arrma Felony Front Splitter

Front splitter for Arrma Felony, made specifically for the Bittydesign VPR body. Includes full and split files for smaller printers, and also SVG file so you can use the inside curve and bolt holes and design your own outside curve. Print…

Downloads
142
Likes
12
Rating
0
P
PrintablesChilihead

ARRMA 5mm Turnbuckle Wrench

Picked up an ARRMA Typhon but didn't have a turnbuckle wrench. It's designed to be a close fit so it doesn't strip. You'll have to press it on the first time. Maybe even take a few swipes of sand paper. I printed it out of PLA at 100%…

Downloads
139
Likes
12
Rating
5
P
PrintablesJulezzz

Arrma Kraton Threaded Body Mount

After losing a body clip I decided to make a threaded mount that would eliminate the need for clips. I printed this in CF nylon and it had been indestructible so far. Print Settings Printer Brand: Anycubic Printer: Kossel Rafts: Yes…

Downloads
135
Likes
15
Rating
0
P
Printablesamish_rabbi

Arrma BLX 3s Motor Support

Based off the motor support by hyperion917 on Thingiverse I wanted to make some changes to both for printing and function improvement I got rid of the tab for the 4mm screw so it could print flat and made a new way for the zip tie…

Downloads
134
Likes
24
Rating
5
P

Arrma Vorteks Mud Guards Set

I took the original file and mirror the right side guard to make the left side and uploaded it. So now you can get a set

Downloads
132
Likes
16
Rating
0
P
Printablespandaym

Arrma 4S V2 Shock Rod End (Kraton/Outcast)

Can be printed in different materials, depending on what you want to achieve. I have printed them in Polymaker PolyFlex TPU95 and Prusament PC Blend. Currently testing to see what works best. Custom supports are drawn directly onto the…

Downloads
132
Likes
7
Rating
0
P
PrintablesReese Boisse

Alternate Wheel Wells for Arrma Felony/Infraction

Rear wheel well fully redesigned from new sketches to match side skirt mounting holes on original design. More strength, and allows more room fore and aft of the tire to prevent rubbing. Front deflector includes additional mounting point…

Downloads
129
Likes
19
Rating
0
P
PrintablesGeddysburg

Arrma Kraton/Outcast 4S - Wing Mount Support Brace

I had a TPU wing on my Kraton 4S but the screws ended up pulling through the mounting holes. This piece connects the two screws to prevent against this happening again, while allowing me to still use the wing with the widened mount…

Downloads
127
Likes
22
Rating
5
P
PrintablesChristos

Arrma Mini Kraton Wheelie Bar

To assemble this wheelie bar design, you will need the following hardware: 1x M5 × 80mm Screw 1x M5 Nyloc Nut (Nylon-insert locking nut) 2x 15mm Washers 2x M3 × 10mm Screws 2x M3 × 16mm Screws

Downloads
124
Likes
19
Rating
5
P
PrintablesCartman

Arrma Shock Cap Tool

Usefull tool for disassembly and assembly of the shock caps of the Arrma AR330551 shocks. The shock caps (AR330450) can be quite challenging to remove. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…

Downloads
122
Likes
19
Rating
5
P
PrintablesBoo_Ray

Arrma 1/5 kraton,outcast 8s rear arm

Two versions of rear arms.. -I recommend atleast 3 or 4mm walls/bottom/tops with vertical printing.. For best durability make 100%infill.. This is rear right arm. For left arm - mirror this part. It is a perfect fit. -it doesnt have holes…

Downloads
121
Likes
20
Rating
0
P
PrintablesTechMagic3D

HD Middle Skid Plate for Arrma 6s Kraton / Typhon / Outcast / Fireteam / etc

I had printed some other center skid plates for my Typhon 6s but none of them were as durable as I would have liked, especially as I wanted an ultra strong one for my Fireteam as well. Thus, I made this one which uses 4 M4x12 BCS screws…

Downloads
117
Likes
16
Rating
0
P
PrintablesGamer Unknown

ARRMA Mojave GROM Flag Mount

Hey guys, since the 4th of July is coming up, having little flags on RC cars seemed like a fun thing to do, so I created a mount for the ARRMA Mojave 4S. After recently getting the ARRMA Mojave GROM, I decided to make a flag mount that…

Downloads
115
Likes
23
Rating
0
P
PrintablesDjPatubeer

Arrma Granite roof reinforcement

Hey! This is a roof reinforcement for the Arrma Granite rc car. With this reinforcement the roof is much sturdier than before. This prevents the actual body/case from getting scrached up or bending too badly if the car flips around. You…

Downloads
114
Likes
17
Rating
0

Arrma Granite/BigRock/Typhon 3S Wing Spacer

These should work with the Arrma Typhon 3S wing mount and the upper is modeled for fitting the Typhon 6S wing and Kraton wing. I have not fitted it to the Typhon 3S wing. There is a 10 and 16mm variant. The 10mm works with the granite…

Downloads
114
Likes
15
Rating
0
P
Printableseg_design

ARRMA FIRMA 150 FAN MOUNT [40MM]

Don't just bash, blast it ! This removes the existing 35mm fan and shroud with a 40mm for more cooling opportunities. Screw holes are undersized for thread forming with M3 hardware. BOM [1] 40mm fan (4010, 4020, 4028) [4] M3x15 SHCS [4]…

Downloads
114
Likes
20
Rating
0
P
Printablesbossed.nl

ARRMA Notorious Mudguard

ARRMA Notorious Mudguard with ARRMA logo. Is a variation on a model, but not a remix. Still great inspiration from @Bizkit83.

Downloads
113
Likes
11
Rating
5
P
Printablescoffeeandubuntu

Arrma Granite Voltage Front Bumper

I looked everywhere for an Arrma Granite Voltage front bumper. Couldn't find one to 3D print so I designed my own. I created the front hanger and mount points myself. I used the front design found here:…

Downloads
106
Likes
19
Rating
1
P
PrintablesNoMatter

RC Wheelie Bar ARRMA

Print in some durable material, such as PC or PLA-CF. Tested with PLA-CF. No supports needed. ARRMA_Wheel_Frame - Print twice, 1 mirrored. ARRMA_Wheel - Print twice, 1 mirrored. ARRMA_Wheel_Frame_Spacer and ARRMA_Bearing_Frame_Spacer,…

Downloads
103
Likes
21
Rating
0
P
PrintablesMike81622

RC Car Wall Mount 130 mm / 5.1 inch Tires - 2 Versions (Arrma Gorgon, Granite, Big Rock, Quake, ...)

Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 130 mm / 5.1 inches. 2 versions normal version is recommended for regular tires with foam inserts e.g. Arrma…

Downloads
103
Likes
11
Rating
0
P
PrintablesGizmotoy

Foam replacement for Spektrum SLT3 and Arrma ATX101 transmitters

I really dislike the foam feel of RC car radios. I decided to design a replacement for the SLT3 used with my Arrma Typhon 3S. This part will fit any SLT3 transmitter, which comes on most all of Arrma's 3S line (Typhon, Granite, Senton,…

Downloads
103
Likes
24
Rating
3
P
PrintablesRinzl3rs

Arrma Grom Typhon Lower Shock Cap

My daughter lost her lower shock cap on the Arrma Grom Typhon 2s and I refuse to pay $18 for a new one. Made this quickly in Fusion360. Printed as follows .16 Layer height 100% infill ABS or PETG Support only in middle

Downloads
102
Likes
19
Rating
5
P
PrintablesLeon

Arrma Big Rock/ Granit Schlammschutz

Schlammschutz für Arrma Big Rock/Granit

Downloads
101
Likes
7
Rating
0
P
PrintablesBLMaker20

Arrma Rear Lower Suspension Arma 148MM (ARA330654) | 3D Scanned

I 3D scanned this Arrma part and edited the holes a bit so it's printable. It is a little bit rough on the surface. The printed one is on the left. It fits without any problems, screw holes are a bit tight but it won't strip your screw…

Downloads
101
Likes
20
Rating
0
P
PrintablesMike81622

RC Car Wall Mount 66 mm / 2.6 inch Tires (Arrma Mojave Grom, ...)

Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 66 mm / 2.6 inches. I designed the bracket for the Arrma Mojave Grom. For mounting use 2x 4,5mm Spax screws…

Downloads
100
Likes
12
Rating
0
P
Printablesjovo0911

Arrma Granite 3S BLX Front Shock Protector

Front Shock Protectors for My Arrma Granite After destroying the front shocks on my Arrma Granite for the second time, I decided to create protectors similar to the ones I use on my TRAXXAS Slash . Assembly is quite simple: You only need…

Downloads
97
Likes
19
Rating
0
P
Printables3DprintingDad

Arrma 6s shock ball bushing

I made this design due to losing the originals while making a repair. these were designed to be a temporary fix, but the fit well and i may run them a while to see how they hold up! printed with PETG with %100 infill and a brim. my qidi…

Downloads
97
Likes
15
Rating
0
P
PrintablesLarry Kalis

Arrma 4x4 BLX 3s Pivot ball larger ball

Should fit any of the 3s Arrma models. credit to resu13 took his design and made slightly larger ball part to fit my sloppy arms. Most of mine "clicked" in place. In Cura right click multiply to the number you want. Print Settings Rafts:…

Downloads
95
Likes
11
Rating
0
P
PrintablesLeon

Arrma Big Rock/ Granit Winterräder

Winterräder für Arrma Big Rock/ Granit

Downloads
95
Likes
16
Rating
0
P
PrintablesLeon

Arrma Big Rock Spiegel

Spiegel für Arrma Big Rock

Downloads
95
Likes
10
Rating
0
P
PrintablesSilverBullet126

Arrma Infraction - SkyRC GSM020 GPS Rear Mount

This mount for the Armma Infraction puts the SkyRC GSM020 GPS on the outside of your truck where you can see it. It will sit horizontal with no angle and is held down by 3 zip ties per side and one on cross brace so it won't slide down.…

Downloads
95
Likes
9
Rating
5
P
PrintablesVpetr27

Arrma Gorgon/Fury/Vorteks 540 Motor Spacer

Print in PETG or ABS for heat resistance. 2x M3 X 12 Countersink screws to attach the spacer to the motor and 2x M3 X 16 screws to mount the motor are required. Fitment tested with a Castle 1406 motor in a Gorgon and should work with most…

Downloads
95
Likes
5
Rating
0
P
PrintablesDoubleC

Arrma Mojave 6s / EXB Mudguards

Mudguards for the Arrma Mojave 6S V2 / EXB. Two versions: One pair with "Mojave" print and some blank ones. Works with Scorched RC Fenders. Print in TPU, use M3x6 or M3x8 to attach them. Send it! Print Settings Printer Brand: Creality…

Downloads
92
Likes
5
Rating
4
P
PrintablesMike81622

Arrma Mojave Grom Mud Flaps

There are already some mud flaps for the Mojave Grom around on other platforms, but none of them really satisfied me, so here's my take on them, hope you like it :) Mud Flap Mount: Re-use the original screws, or replace them with 2x M3x16…

Downloads
92
Likes
20
Rating
4.5
P
Printablesltlowe

Arrma Mojave 4S Center Shaft Cover

A cover for the center shaft of a Arrma Mojave 4S XXLWB chassis. I made this because so I don't have to worry about battery wires or anything else getting caught in the shaft. In addition to covering the center shaft, it also slots over…

Downloads
90
Likes
10
Rating
5
P
PrintablesVuLcAiN

ARRMA Wheelie bar

Design Concept The design focuses on durability and stability, ensuring that the Wheelie bar withstands high-speed stresses. Perfect fit for ARRMA QUAKE & ARRMA GORGON. Purpose This Wheelie bar is tailored for ARRMA vehicles, aiming to…

Downloads
89
Likes
7
Rating
0
P
PrintablesOptikks

Arrma Mojave 4S Max8 Esc Holder

Für alle die eine Max8 in den Mojave 4s einbauen wollen. Wer den ESC kleben will nimmt nur die untere Platte, in Verbindung mit der oberen Platte lässt sich der ESC verschrauben. Könnte evtl auch für den Kraton 4S passen aber mangels…

Downloads
88
Likes
7
Rating
0
P
PrintablesMike81622

RC Car Wall Mount 105 mm / 4.1 inch Tires (Arrma Senton, Fury, ...)

Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 105 mm / 4.1 inches. The bracket is optimized for Short Course Trucks, e.g. Arrma Senton or Fury, to give…

Downloads
86
Likes
16
Rating
0
P
Printablesevd

Arrma Rear Mud Guards for ARA-1606 (Granite V4, Senton, Fury, etc)

Basic mudflap design shaped to not interfere with the chassis much. A lot of the designs currently are for older arms. Fits my Granite 223S V4 and going by the site a few others that use the ARA-1606 rear arms: Gorgon Fury Senton Vorteks

Downloads
85
Likes
16
Rating
5
P
PrintablesLarry Kalis

Arrma 3s Rod ends with pivot ball

Arrma 3s rod end with pivot ball built in. Print using supports. Paint on might be necessary use PETG or ABS Note: I have not tested this. Please leave feedback and rate

Downloads
84
Likes
10
Rating
0
P
PrintablesRusteh101

Minamilist Shelves for 1/10 Scale RC Car Stand by Chad - with Arrma Grom sized shelf too!

This is a more minimalist shelf design for the already excellent design by Chad. The shelves also have a 6mm wide channel with allows self adhesive draft excluder foam to be inset which adds a grippy surface -…

Downloads
84
Likes
10
Rating
0
P
PrintablesBoo_Ray

Arrma 1/5 kraton,outcast 8s front arm

This is a rough model of front arm for kraton 8s. I haven't tested it! For rear arms I had best results while printing it at 45deg angle with ABS plus and high temps.. Arm held for normal bashing and some big jumps - but failed at landing…

Downloads
83
Likes
16
Rating
0
P
PrintablesVuLcAiN

ARRMA Quake/Gorgon +20mm Wide kit

Design Concept This model is designed as a customizable upgrade for ARRMA RC cars, offering both aesthetic appeal and enhanced performance with its robust frame. The coolest way to add +20mm Wide to your favortie ARRMA car! Usage Ideal…

Downloads
80
Likes
18
Rating
0
P
PrintablesMike81622

Arrma Grom and Mini Kraton Shock Stand

Really liked Ludolg's shock stand, the 1/8th base works great for Kraton 6S shocks, but I also needed something for my Grom's and the Mini Kraton, the 1/10th base was too large, so I quickly made a new one that would fit my needs. Just…

Downloads
77
Likes
11
Rating
0
P
PrintablesChris

Arrma Gorgon - Radiolink R4FGM Mount

This is a mount for a Radiolink R4FGM receiver to be mounted in front of the rear shock tower on the ARRMA Gorgon. The mount uses the existing mounting holes for the rear shock tower mount. Once mounted the receiver sits in a tray and is…

Downloads
76
Likes
13
Rating
0
P
PrintablesTomasino

Arrma Senton Wheelie insert and wheelie

Print from PETG wheels 5 walls 15% +filling Insert full perimeter Need 2 pcs 4mm x 40mm Screw

Downloads
75
Likes
12
Rating
0
P
PrintablesAndrei Gakh

arrma mojave 4s ARA320740

Для печати отлично подходит ТПУ 95А. При необходимости отверстия пройти сверлом. Печать без поддержек со 100% заполнением.

Downloads
75
Likes
13
Rating
0
P
PrintablesMindCTRL

Arrma Kabelmount

Ich habe eine Halterug für die Mittelstrebe gezeichnet um 5mm Kabel schöner zu verlegen.

Downloads
73
Likes
16
Rating
0
P
PrintablesMike81622

RC Car Wall Mount 91 mm / 3.6 inch Tires (Arrma Mini Kraton)

Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 91 mm / 3.6 inches. I made the bracket for Arrma Mini Kraton. For mounting use 2x 4,5mm Spax screws or…

Downloads
73
Likes
12
Rating
0
P
PrintablesBizkit83

Arrma Notorious Wheelybar Wheel

Wheel for the wheelybar of a Arrma Notorious 6S v5 Print in TPU and no Supports

Downloads
72
Likes
10
Rating
0
P
PrintablesHolger Averes

Arrma Mini Kraton 3S - Mudguards

German Mein Design dient als Ersatz für die originalen Mudguards (ARA-3293). Es funktioniert beim Arrma Mini Kraton 3S. Ich habe die Mudguards in TPU mit 100% Infill gedruckt. Ich denke, dass es nur Sinn macht die Mudguards in flexibelen…

Downloads
71
Likes
9
Rating
0
P
PrintablesTechMagic3D

Velcro-compatible SkyRC GSM-020 Mount for Arrma Infraction

This is a remix to allow mounting the GPS with just Velcro or another similar material instead of clips. Cutouts are on both sides to allow easy removal, and it's also possible to charge the GPS with a low profile USB-C cable. Print…

Downloads
70
Likes
9
Rating
0
P
PrintablesHolger Averes

Arrma Mini Kraton 3S - Piston Protector

German Mein Design sorgt dafür, dass der Kolben des Dämpfers geschützt wird. Es funktioniert beim Arrma Mini Kraton 3S. Ich habe es in TPU mit 100% Infill gedruckt, damit es eine gewisse Flexibilität und Stabilität hat und nicht so…

Downloads
70
Likes
9
Rating
2
P
PrintablesPureDeath

Arrma Talion Mudguard

2018 Arrma Talion rear Mudguards, uses the 2 spare M3 screw holes in the rear A-arm to mount the mudguard. Versions Normal: Mk5: Vertical only ribs for ease of cleaning and rigidity. Mk6: Vertical and horizontal ribs for extra rigidity.…

Downloads
69
Likes
12
Rating
0