Ashtray Harley Davidson
Ashtray with a logo. Harley Davidson. Colorchange if you want it original.
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant
- Downloads
- 959
- Likes
- 136
- Rating
- 5
488 models
Ashtray with a logo. Harley Davidson. Colorchange if you want it original.
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant
Taschenaschenbecher mit Öse für eine Kette
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Minimalistic IQOS Ashtray
Print approx. €1.70–€2.07 excl. taxPreliminary estimate for one variant
Self-Watering RoboPot Pot for Herbs or Ashtray Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal https://www.paypal.com/donate/?hosted_button_id=EA4R2NXW5LM7E Support with ETH…
Print approx. €4.35–€5.32 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €2.35–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
This threads on to the top of a 2L pop bottle. The middle of the funnel features a pick to loosen stubborn debris.
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
I used Prusament PLA Prusa Galaxy Black for printing. It would be nice to use a different color for each part of the ashtray. width: 100mm height: 120mm
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Diameter about 10cm! No support needed. I recommend a brim…
ashtray for iqos all models. Popelník pro iqos
Portable Ashtray No supports PETG / ABS / ASA 68mm height
High quality scanned souvenir skull ashtray
Just place a beer bottle cap in the middle where you can put out the cigarette. In der Mitte einfach einen Kronkorken platzieren um die Zigarette auszudrücken.
Fits into the newer ashtray railsystem (after 96, i think.) modified some parts for better printing in PETg on Prusa MK3S: cupstand arms were strengthened because they broke easily on low res prints the front panel was split into 2 pieces…
Lockable ashtray for heated cigarettes.
I made this ashtray for my Friend who loves Porsches. All the parts do fit on a standard 220mm build plate but I recommend printing the lid separately and with a raft to avoid warping. The wheels and body support M4 bolts and inserts (I…
Wie der Name schon sagt habe ich einen Aschenbecher designt. Da ich nie einen für meine Gäste zu verfügung habe und jedes mal einen aus Alufolie basteln muss :D Now in English As the name suggests, I designed an ashtray. Since I never…
I took Fotis Mint’s Nazgûl model and resized it, cut out the sword and a cylinder down into it to hold a pen. I have that model uploaded as well. Then I took the one ring and sized it up. Added a floor and dropped in the Nazgûl figures. I…
Remember to hit LIKE on my design if you download it so I get credit, thanks! Yet another cigar ashtray! Check out all my ashtrays: https://www.printables.com/@geokscott/collections/1050149
Oriental styled ashtray with optional rain cover lid. Print without supports! Turn off “ensure vertical thickness” to save on filament.
Made this for my car to store my used heets. It fints in the cup holder.
I wanted a simple design that I could cast easily in concrete. this is what I came up with. I might have to modify slightly to increase the thickness of the bottom. We'll see. I'll cast another one and test the strength and get back to…
A sliding ashtray for cigar smokers inspired by an existing design with a beautiful cubatabacco logo on the front. The ashtray allows you to let the cigar rest and also catch the ash while it rests. Its not designed as a pocket ashtray,…
0.2mm layer, 3 walls, 15% infill thread opening printed with overhang supports
This is an ashtray I made to use with my Arizer Extreme Q vaporizer. The holes can fit a ton of different tools, but I use mine to hold things like a 510 battery, some extra pokers and a brush, and a lighter. Also included is a rolling…
Ashtray slider BMW E46 for bmw
Redesigned for a friend of mine who wanted this with an ashtray for 4 cigars. Simple edit. Enjoy! Category: Interactive Art
Je to můj první modlel, tak prosím o schovívavost :D Jedna verze je s dírama, druhá bez. Tiskl jsem to na PRUSA MK3S+ a MINI+. Z matného černého PET-G. Pokud máte funkční, správně seřízenou tiskárnu, tak se vám ani moc nezbortí převisy :D…
General Information I printed it on my BambuLab P1P using AMS. If you don't have multicolour printing, you can swap colours at 2.6-3.0mm layer height. Material I've used ASA and ABS, we've tried it with some cigarrettes and it didn't melt.
Ashtray sustained by a hand with a base, two pieces, no suports needed, printable in PLA/ABS with a minimum 25% infill
A remix of J4nm4Nn Ashtray with a slight draft and chamfer here and there. Main reason for the remix was to add text to the bowl. Fusion files are included in case you want to edit the text or number of cigars supported. The last sketch…
Symbol cannabis for use ashtray or decor, very nice
I printed from 0.75 PLA, but maybe it's better to print from ABS or ASA. 50% infill no support 0.4 nozzle 0.2 wall height with 2 lines
Easy and simple stoner's ashtray. For tobacco use only.
no supports, nozzle diameter 0,4mm, layer height 0,2mm, perimeter 2
I designed this cupholder for a VW T4 Transporter , maybe it also works for other models (NOT TESTED!!!) Tips & Tricks: To print this cupholder: It is needed to use SUPPORT!!! I doing my best to make the model printable. Material: 2x…
Cigarette / Joint Holder and Ashtray Short holder / Tall Holder attach to the ashtray base via 3x6mm magnets (or you could just glue them together). Magnets also can be added to the base.
The other day a friend had a serious bike accident followed by some CT and MR scans and eventually a brain surgery. He's kind of OK now BTW. However of course the first thing I had to ask was for his scans. Many were optimized to…
IQOS ashtray / IQOS popelník
Spike is removable as with time the spike will wear down with time. I recommend using 100% infill for the spike as otherwise it can break while screwing it into the bowl. Other than that I used .2 layer height and had no issues with the…
They say you must drink from the skull of your enemies, well how about smoke from them? This is a remix of a skull with a bullet hole, used to make a Cigar Ashtray ! Attribution: Hollow Skull w/ Shattered Occipital Bone by edoubleb (…
This is a smokeless ashtray printed in 2 parts. The bottom part is where the cigarettes are stored and a top part is the lid that covers and does not let the smoke get out. I printed it in pla+ with supports in place. Please let me know…
i remixed the customizable ashtray from here: http://www.thingiverse.com/thing:316440/ i just added an extinguisher to the center. works like a charm and makes the ashtray much more durable, because of less contact with hot ash. the…
I modified the model from @gauguerilla so it can be used with the original ashtray cover in the T4. This keeps the original look of the dashboard. It's best to glue the holder for the cover to the drawer, but it also works without glue.
Simple ashtray. I printed in pla and have some light burn marks but it works. If you dont want that i would probably print in petg or abs.
The source marked this model as adult content.
Ein Aschenbecher zm festklemmen für den balkon habe alles mit genügend toleranzen versehen der schwalbenschwanz solte perfekt passen habe alles auf einmal mit dem mk3s gedruckt aus petg für eine höhere hitzebestendigkeit am besten währe…
Made for my wife for VDay and her love of MJ. Printed on Ender 3 with PLA. No Supports.
I created this ashtray with rounded corners (Ashtray_rounded_off.stl) and another version with 90° angles (Ashtray.stl). You can choose what you prefer to print. Print instructions I used PETG and ABS Material I used ColorPrint of Prusa…
I printed with black CR-PLA on Ender 3 PRO. 0.4 mm nozzle, 0.2 mm layer height. 3 wall lines, 5 top and bottom layers, no brim/raft, support only for inside. BASIC ASSEMBLY: Put lid on ashtray aligning the hindge and place the pin through…
Enhance your smoking experience with our sophisticated ashtray, specifically designed to cater to cigar aficionados. Combining style and functionality, this ashtray is an essential addition to any smoker’s collection. Features: Elegant…
Round three-legged ashtray design for Iqos heated tobacco sticks. I found that the best finish on the rounded lid is achieved with 100% infil.
Upgrade your Volkswagen Golf 6's ashtray with a 3D printed wireless phone charging station. This design can be used for wireless charging, or simply as a phone holder. It should fit phones that are up to 165mm long, and 82mm wide. You can…
SMOKING KILLS!! Made these four different models of an ashtray try and quit smoking, but in the meanwhile dispose your ash with style I printed them with a 0.8mm nozzle works great and a fast print in about 1h. If your using a smaller…
This is my self-developed ashtray, which is ideal for indoors and outdoors. It has a large capacity and can be covered with an extra lid. Although it is advisable to make the ashtray from fireproof material, in my experience it is not…
I made this model as a gift for a friend. It consists of 2 parts, the main ashtray and the spinning roulette. You will need a small metal ball, such as a 6mm steel ball ring (as shown in the photo). It has 55 filament changess. Used 106…
Hatch for ashtray/compartment behind gear shift for Opel Astra J, there is place for 2mm magnets to prevent opening
I needed a cupholder in my new (old, used…) Wingamm Ibis 500 based on a VW T4 and couldn't find one I really liked and so I made an own one. My T4 is 1998 but should fit on other construction years as well. It replaces the original front…
Created this IQOS ashtray for my desk Main Dimensions with Lid on: Height: 83mm Width: 60mm There is a small gap for the lid - 0.15mm - make sure your printer is tuned so that it's a good fit Pictured Print settings: Ashtray: PLA-CF 0.3…
I used evanphi's design but altered it to fit a wider mason jar and to be able to be closed without unscrewing it first. Also included is the option to use a brad nail for the point instead of plastic. Print the lid without supports and…
A nice cigar ashtray with embossed "I Smoke Cigars and I know Things" saying. Should be used to make a mold and actual ashtray made from a non-burning material, or print in a very high temp material. UPDATE 12/9/2023: I centered the text…
This detailed 3D print features He-Man in his iconic pose – powerfully raising his arms to hold an ashtray (or small bowl). Perfect as a decoration for your desk, shelf, or as a unique conversation piece. The model is carefully designed…
Can hold up to 7 cigarettes at once. I loved this design but only thing i was missing was a place to extinguish the cigarette butt. So i added it. Printed from PETG i had no problems with melting or any fire hazards. Enjoy my remix.
Easy to print ashtray for tobacco pipe smokers. 2 cupped holders on the side to hold the pipes. The middle has a volcano shape for pushing a wine cork in, so you have the cork knocker for emptying a pipe. Printed PETG due to heat…
This ashtray design is perfect for fans of gothic, dark fantasy, or Halloween vibes! The skeletal spider body supports the ashtray, with bony hands gripping the rim for a dramatic and eerie effect. Standing firmly on a round base, this…
Made this few years back. Still intact till today. Drop a comment for feedbacks Printed in ASA 100% fill. ABS or others Enable "Detect Thin Wall"
The IQOS Ashtray is printed in 150% at the photos.
Replica Ferrari F355 OEM ashtray with reinforced areas that commonly crack or break.
I needed a simple cigar ashtray to carry while traveling which had a lid in case there wasn't a possibility to immediately dump the ashes. The lid flips and installs rotated to work as the cigar rest. I printed this in PATG with supports…
Volkswagen Kombi/Beetle Ashtray + Cup Holder --------------------------------------------- Version 2 Added: I was asked to make the cup holder compatible with Stanley cups and to make the connection between the ashtray and the cup holder…
Printed outdoor ashtray. Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 10 Filament: Winkle PLA Yellow Notes: You can print this with a larger layer height but…
So, let me tell you the story of how I came up with this simple ashtray in just 5 minutes. I don't smoke, but my dear friend does a lot. After moving to a new place, I couldn't find the ashtray that I usually give him to use. So, a few…
Yet another cigar ashtray. Check out all my ashtrays: https://www.printables.com/@geokscott/collections/1050149
Made a ash tray replacement lid as my 350z didnt come with one, saw something similar but the person never uploaded a stl and stopped selling on etsy so i knew i had to upload this for others. The box is really basic, i just made it as a…
Cigar Ashtray inspired by Les Fines Lames concrete ashtray . There is the standard version and a version with the adaptation to insert a cap (in my case in aluminum) to avoid burns and to completely remove the ash and avoid bad smells
Ashtray designed after Seth Rogan's houseplant ashtray's. This ashtray is printed from PLA wood.
This custom-designed replacement for the BMW E46 ashtray and storage insert solves the issue of the always-on 12V outlet. Normally the cigarette lighter/12V outlet remains powered even when the ignition is off. This insert includes a…
Another Cigar Ashtray. See the #2B of this version also. I offset the cigar rests a bit. Check out all my ashtrays: https://www.printables.com/@geokscott/collections/1050149
This is a remix of my original acessory-clip for the slots under the ac controlpanel in a VW Golf 3 I recommend printing it in PETG with tree supports. If possible use 100% infill to make sure the retaining clip has the best chance of…
Filament Brand: gst3d Printer: Ender 3 V2 Printed at 0.2mm layer height with 0.4mm nozzle 70mm/s Supports: No Edition: Tinkercad.com
Use suitable refractory filament only! No support structures needed. ************************************************************************************************ Feel free to cantact me if you have any questions or ideas for…
Designer eAshtray for iqos on heets and Terea cigarette butts Our eAshtrays of various shapes and colors are created for home production using 3D printing and will reliably decorate your home or office. All shapes and colors of our…
second Version of my Ashtray Ashtray_Lid_Bottom(x4).stl has 0.4mm wiggle to the lid hole same as v2 bottom
Designed this to fit into the ashtray mount of your Sequoia or Tundra. Product slides right in and is a tight fit so that it does not slide out. It will hold a phone on the bottom and fit an S23 Galaxy. The top will fit my trayvax wallet…
simple ashtray for model railway
Small ashtray for on the go. For the outdoors, while traveling. No bigger than a matchbox.
remix of Stoner's Ashtray replacable screw tip for better ash remove and if ash is hot and tip was melted you priit just tip not all the ashtray
Elegant 3D Model of a Cigar Ashtray – A stylish and functional ashtray designed for cigar enthusiasts. Featuring deep grooves for secure placement and a wide basin for ash collection.
Cone tip and a curved cone tip. No supports needed, really… you can if you want. it printed the overhang functionally enough that i dont have an issue screwing them off and on.
If you want to keep your ashtray tidy, I recommend this model
Mit den flachen Seiten nach unten drucken Direkt nach dem drucken (wenn der Druck noch warm und das PLA noch weich ist) schon mal zusammenschrauben, damit sich das Gewinde etwas “einschleift”. Gedruckt auf einem Anycubic i3 Mega S in PLA+