Search results: asi

Sort order

5,570 models

P
PrintablesCardSlinger

Card Slinger 3.0 - for MTG / ManaBox App - For Sleeved and Unsleeved Cards - Easily scan in bulk quantities of cards by hand

Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…

Downloads
63,115
Likes
4,823
Rating
4.66
P
Printablesbatman

Dummy 13 (Beta) On Runners (Easier to print)

I was interested in printing the Dummy 13 but found that without the runners found on the Easy/Mini I had a hard time getting the parts to stick. I realize that the parts are “Beta” and @soozafone plans to make runners eventually but I…

Downloads
40,232
Likes
4,208
Rating
4.86
P

Bat Cat Batman Mask Even Easier

I just gave it a flat bottom so it sits flush on the build plate. All credit goes to the original creators. My cat was not willing to model it for me

Downloads
34,207
Likes
3,396
Rating
4.91
P
PrintablesHD_Creator

Miniature Vise 2.0 (much easier to assemble and 100% printable)

History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…

Downloads
24,102
Likes
4,212
Rating
4.85
P
Printablesjdegs

Basic Gridfinity Baseplates (CadQuery Customizable)

This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic baseplates using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you…

Downloads
21,747
Likes
2,709
Rating
4.97

3D Printing Bridge Calibration Test (Basic & Advanced)

🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…

Downloads
19,004
Likes
5,479
Rating
4.86
P
PrintablesDuke Doks

Chassis 1/10 Adaptable - DKS-Basic

UPDATES: 12/2021 "A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated…

Downloads
12,888
Likes
2,200
Rating
4.89
P
PrintablesPrusa Research

Basic Board + PSU Add-on Printable Parts

All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…

Downloads
12,656
Likes
420
Rating
4.88

Cylinder - basic geometric shape

Cylinder r = 100 mm h= 100 mm Can be used as skirt with 0% infill, 0% top and bottom layers and 1 perimeter.

Downloads
11,527
Likes
63
Rating
4.71
P
PrintablesCarlos Alberti

Basic Toolbox – Creality Ender 3 V3 SE

Basic Toolbox – Creality Ender 3 V3 SE This toolbox has been adapted for the basic tools that come with the Creality Ender 3 V3 SE 3D printer model

Downloads
9,863
Likes
2,783
Rating
4.6
P
PrintablesExtrutim

Ultimate Prusa Casing

Click here to check out the new version of this body kit for the MK3 and MK4! Description: After hours and hours of watching the printer printing, you've got bored with the Design of your Prusa? Give it a new look with the Ultimate Prusa…

Downloads
6,813
Likes
3,483
Rating
4.97
P
Printableswedgeworks

Improved Fruit and Vegetable Washing Basin now with Southern Hemisphere support!

***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…

Downloads
6,102
Likes
998
Rating
4.9
P
PrintablesFilliFuu

BASIC LUCKY CHARM BRACELET

Basic profile containing over 9 sizes, new improved links and lock, easy to print with no bridges in the links. This is the standard, non dragon or unicorn bracelets, completely new and improved, with new facial designs, link design and…

Downloads
5,970
Likes
1,566
Rating
4.6
P
Printablestoco_zg

Articulated Snake v1 by Onasiis

Articulated Snake v1 by Onasiis This is not my design, designer is Salvador Manceraonasiis • Spain I just wanted to share it with you.

Downloads
5,824
Likes
437
Rating
4.94
P
PrintablesMagmabow

Auto-Releasing Screw Holder

These screw holders hold a screw in front of a drill, and automatically release it once the screw head starts to enter the material. I recommend printing these from PETG or a stiff TPU e.g solid 68D Inspired and improved version of this…

Downloads
5,802
Likes
1,963
Rating
4.63
P
PrintablesHD_Creator

Self releasing geared clamp hook for towels

Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…

Downloads
5,742
Likes
3,273
Rating
4.76
P
Printablesjdegs

Basic Undivided Gridfinity Boxes (CadQuery Customizable)

This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic undivided boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so…

Downloads
5,484
Likes
662
Rating
4.85
P
PrintablesFestool

Festool Abrasive holder with positioning aid

Festool Abrasive holder with positioning aid - simplify your tool management Where do you currently store your abrasives? Print your own Festool abrasive holder with positioning aid and make your everyday work easier and more productive.…

Downloads
5,476
Likes
1,397
Rating
4.91
P
PrintablesSimin_03

CAN LID 500/330/250 ml STRONG BASIC

CAN LID – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 One-finger…

Downloads
5,204
Likes
1,154
Rating
4.93
P
PrintablesHogwing

Basic Skull for Dummy 13

I wanted a skull that kept the sharp robotic angles of the original head, so here it is. A basic spooky skull for the Dummy 13. I include two versions, one with the original jawline and one with a slimmer jaw.

Downloads
4,876
Likes
1,185
Rating
4.88

Flashforge Adventurer 5M (AD5M) - simpler, easier, faster drag chain termination at hotend (v1.0)

NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…

Downloads
4,511
Likes
526
Rating
4.88
P
PrintableseCrowne

4.7L Mini ITX case, easily printable (2 major pieces), sandwich layout, no extra thread inserts, standoffs or feet required

This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…

Downloads
3,977
Likes
589
Rating
5
P
PrintablesEcholalia

Tweaked Cat Key Hook (stronger, easier to print)

I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…

Downloads
3,915
Likes
755
Rating
4.85
P
PrintablesLittleNeutrino

iPhone 13 Pro Basic Case

Simple case for iPhone 13 Pro Prints easily with PETG or PLA

Downloads
3,862
Likes
100
Rating
4.83
P
Printablesbatman

Lucky 13 On Runners (Easier to print)

After realizing how much easier it was to print the 13 family of prints with runners, I decided to make a runner for the Lucky 13 since I had struggled to get that print to stick (which resulted in some interestingly misshapen ball joints…

Downloads
3,707
Likes
628
Rating
5
P
PrintablesNikaM

Yggdrasil - World tree

Very simple and easily adjustable model of the Yggdrasil - a tree that grows through all nine worlds. Use a piece of double-sided tape to stick it onto a wall or other flat surface. The 3mf file included is for printing on the MK3S…

Downloads
3,667
Likes
1,185
Rating
4.95
P
Printableswedgeworks

Fruit and Vegetable Washing Basin from Thingiverse # 5685812

NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…

Downloads
3,608
Likes
1,665
Rating
4.67
P
Printablesxtoys
18+

The source marked this model as adult content.

Downloads
3,504
Likes
206
Rating
5
P
PrintablesDL

Echo Dot 4 Stand Alexa Mount Hippo, NEW divided version for easier printing

Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…

Downloads
3,348
Likes
524
Rating
4.77

AIRSOFT ELECTRIC SPEED LOADER - BASIC VERSION

Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…

Downloads
3,297
Likes
360
Rating
5
P
PrintablesAllpa

BUILDfinity construction play for kids // Konstruktions-Spiel für Kinder [BASIC-SET]

I loved a similar wooden construction toy when I was a child. However, as more and more components break and my children show a lot of interest in building and constructing, I have started my own printable system. The files in this set…

Downloads
3,094
Likes
1,867
Rating
5
P
PrintablesEve

Basic M3 Screws

These models of high-detail metric screws with a 3mm diameter are available in various lengths of 10, 12, 18, and 20mm. These screws are very common and are also used to assemble Original Prusa Printers! Warning: Do NOT use these screws…

Downloads
3,050
Likes
127
Rating
5
P
PrintablesMrViddy

Basic Clamp - Print In Place

Recommend printing in PETG Personally I printed it Gyriod with 20% infill and 5 layered walls for extra resistance. FOLLOW Radical Maker’s instructions for more details. ***DO NOT put full strength into the clamp it will possible snap…

Downloads
2,869
Likes
973
Rating
5
P
PrintablesFAN 3d studio

Capuchino asasino

Italian brainrot

Downloads
2,735
Likes
79
Rating
4
P
PrintablesAlanBr

Basic geometric shapes 3D

3D Basic geometric shapes Shapes: - Cylinder - Prism_triangle - Prism_right_triangle - Prism_Pentagon - Prism_hexagon - Prism_star_5 - Prism_star_6 - Cube - Cube_hollow - Cube_rounded - Cube_rounded_hollow - Sphere - Semi-Sphere -…

Downloads
2,715
Likes
86
Rating
5
P
PrintablesminiShev

Mesh Basilisk

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…

Downloads
2,675
Likes
717
Rating
4.75
P
PrintablesAlveo3dPrint

Impression 3D de piège à frelons asiatiques

🌸 Le printemps arrive ! 🌸 C'est l'occasion idéale pour appuyer nos apiculteurs locaux 🐝. Nous avons lancé une initiative pour imprimer des pièges à frelons asiatiques. Cette pièce est un piège imprimé en 3D pour les frelons asiatiques,…

Downloads
2,669
Likes
56
Rating
5
P
PrintablesTHE MOC CHANNEL
18+

The source marked this model as adult content.

Downloads
2,657
Likes
1,381
Rating
5
P
PrintablesMake a Thing

Basic Wheel Chock

Wheel Chock for car. Should work for most car tires, not recommended for truck tyres. No supports required. Recommended to print at 0.35mm, resolution is not really important. Do not use this for safety.

Downloads
2,634
Likes
755
Rating
5
P
PrintablesSkeletalPrints

Hollow Knight - Easier Printing

Cut off some parts for easier printing White - Jessie White PLA Gray - Galaxy Silver PLA Black - Jessie Black PLA Category: Sculptures

Downloads
2,630
Likes
339
Rating
4.9
P
Printablesbubo_bubo

Easier Print - Ancient Guardian from Zelda Breath of the Wild

Remixed for easier printing. No supports needed. Prints well with both 0.4mm nozzle/0.2mm layers and 0.6mm nozzle/0.3mm layers. Looks especially snazzy in coextruded silk PLA.

Downloads
2,627
Likes
420
Rating
5
P
PrintablesJDO solutions

Marble track - basic tile v2 (Gravitrax compatible)

update 5th of April Finally, the highly anticipated update to the base tile! The two part improvement was easier to print, but needed glue for good usability. I have been looking for a better solution for a long time and I think I have…

Downloads
2,608
Likes
187
Rating
4.91
P
Printablesalloria

Basic Multi Material (MMU2) Tester

A nice simple test for the MMU2 (or MMU2s) which uses all five filaments. Gcode included for MMU2s and MK3s Print instructions I printed these at 0.2. Gcode included.

Downloads
2,606
Likes
91
Rating
5
P
Printablesjtuckwitz

T-Rex Chicken Arms modified for easier printing.

T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…

Downloads
2,605
Likes
269
Rating
4.83
P
PrintablesSimin_03

CAN LID CLICK 500/330/250 ml STRONG BASIC

CAN LID CLICK – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆…

Downloads
2,518
Likes
601
Rating
4.78
P
PrintablesMiniWorld3D

St. Basil's Cathedral - Moscow, Russia

🇷🇺 Добро пожаловать в Россию Welcome to Russia Important Note: Artemio García started creating this model for MiniWorld3D several years ago. When he finally finished it, the war between Russia and Ukraine had just started. We decided to…

Downloads
2,516
Likes
312
Rating
4.89
P
PrintablesDrKronos

INVASION! The electric tea light UFO

The 10mm diameter, 3mm height magnets to hold the two halves of the UFO together are optional, as a display piece gravity alone should be sufficient. Use a piece of wire to hold the UFO over the base at a height and an angle you like.…

Downloads
2,500
Likes
1,461
Rating
4.92

Flashforge AD5M Enclosure Hinge - remixed to be easier to open and use (print-in-place Door Hinge) v1

NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…

Downloads
2,397
Likes
153
Rating
4.92

Cone - basic geometric shape

r = 35 mm h = 100 mm

Downloads
2,397
Likes
31
Rating
5
P
Printables3D2H

Fruit and Vegetable Washing Basin

I liked the design and idea, but I definitely don't like supports and multi-part designs unless necessary.

Downloads
2,323
Likes
215
Rating
5
P
PrintablesJDO solutions

Marble track - 16 different tile insets (gravitrax compatible by using my 6 exits basic tile)

16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…

Downloads
2,241
Likes
289
Rating
4.94
P
PrintablesRithm3D

Nissan Emblem - Basic

There are many Nissan emblem designs from the CAD community but this one is mines LOL! *NOTE : When printing this design, you WILL NEED SUPPORTS for the “Nissan Emblem - Body”. For both the FDM, FFF, and SLA printers you will need…

Downloads
2,225
Likes
71
Rating
4.5
P
PrintablesPavel Brych

Venusaur - modular for easier print (Venusaur - modulární pro snazší tisk)

Venusaur pokémon has intricate flower on his back, which is quite hard or impossible to print on FDM printer in one piece (you would need soluble supports). Especially when printing smaller size figure. I used Venusaur body from…

Downloads
2,143
Likes
253
Rating
4.88
P
PrintablesRC_3DWorks

Universal wall mount - basic

Since a lot of people liked the incremental rotatable version, I made a basic version that rotates the full 360 °

Downloads
2,076
Likes
1,321
Rating
5
P
PrintablesJirka

Large massive screwdriver holder / Masivní držák pro šroubováky

Large semi-circular screwdriver holder, honeycomb pattern. Large, sturdy and universal holder for small and medium size screwdrivers. Relatively long but easy to print.

Downloads
2,058
Likes
823
Rating
5
P
PrintablesFoundry K41D

Dummy 13 250% Basic Armor and Frame - Female/Male

I always print the Dummy in 250% now that I did it once and loved it. It's basically Barbie sized and allows for so much more detail in both the Dummy and the accessories. I have been asked a number of times now about sizing of the Dummy…

Downloads
2,036
Likes
507
Rating
5
P
PrintablesBash-T

Top Hat DIN Rail / Cap Rail mount base plate / Basisplatte f. Hutschiene 35mm

This a generic mount for a 35mm top hat rail. This mount clamp snaps quite tight at the top hat rail and has a 10mm flat mounting base on top. You can easily attach different mounting cages to this base plate with glue. Update: I uploaded…

Downloads
1,982
Likes
66
Rating
5
P
PrintablesADAMCA.LAB

GoPro Mount (Basic Flat)

GoPro Mount (Basic Flat) - Print your own GoPro mounts cheaper (10g = $0.50/0.50 EU/ 12 CZK)! - TESTED: very resistant

Downloads
1,949
Likes
188
Rating
4.95
P
PrintablesMZ4250

Basilisk Updated

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
1,922
Likes
82
Rating
5

SpaceMouse Mini - Slim profile, with easier assembly and various improvements - v3

For a lot of helpful details/info please consult the main Teaching Tech listing here: https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix This final assembly video explains all about my remixes in this set:…

Downloads
1,853
Likes
720
Rating
4.86
P
PrintablesUdo's 3D World

Basic dice set for DnD

Since I started working on a dice generator, I would like to share one of my first creations from it. In the current state, it's still quite experimental, but the final dice generator aims to allow you to exchange every single side with…

Downloads
1,799
Likes
242
Rating
5
P
Printablesnazar-pc

Basic Micro ATX test bench

Source code (designed in SolveSpace): https://github.com/nazar-pc/matx-open-test-bench It only has motherboard tray and support for 4 expansion cards. No I/O shield or anything else, has cut-out on the back for easier cooler and back SSD…

Downloads
1,757
Likes
137
Rating
5
P
PrintablesSeeed Studio

Wio Tracker L1 Pro for Meshtastic Enclosure Casing

The Wio Tracker L1 Series is a low-power, scalable Meshtastic node featuring LoRa (862–930 MHz), an nRF52840 for efficient processing, and an L76K GPS for precise location tracking. The L1 Pro version is a fully integrated,…

Downloads
1,702
Likes
145
Rating
3
P
PrintablesColson

Heavily Tuned Amazon Basics TPU Print Settings

This project uses low temps, high extractions, slow speeds, and several other tweaks to remove oozing and major defects with this specific TPU filament. Make sure to have your tensioner screw as loose as possible and use a 0.4mm nozzle.…

Downloads
1,692
Likes
108
Rating
4.75
P
PrintablesZkaza

Cat Water Bowl (Gravity Feed) + Easier Print + Legs

Even more slightly improved Cat Water Bowl, with just added legs for stability. Thanks to mitchell_cj for the original model and minar for improved one. Print instructions Printer brand: Creality Printer: Ender 5 Rafts: No Supports: No…

Downloads
1,675
Likes
283
Rating
5

Flashforge AD5M Enclosure Hinge - remix - easier to open, better door placement (print-in-place Door Hinge) v2

NEW VERSION v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the added…

Downloads
1,660
Likes
150
Rating
4.88

Mini 13: Melee Weapon Set - Basic Swords 1

Mini 13: Figurine System Compatible Melee Weapon Set, includes 5 weapon designs: Scimitar Shortsword Longsword Sabre Katana

Downloads
1,648
Likes
152
Rating
4.67
P
PrintablesMiniWorld3D

St. Peter's Basilica & Square - Vatican City

🇻🇦 ¡Benvenuti in Vaticano! Welcome to the Vatican! The world has a new Pope, Leo XIV, and on this occasion, MiniWorld3D is bringing a major landmark of Rome and the world to our library. This entry is a highly-detailed model of St Peter's…

Downloads
1,634
Likes
271
Rating
5
P
PrintablesminiShev

Basilisk

More Basilisk here Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all…

Downloads
1,566
Likes
357
Rating
4.91
P
PrintablesJDO solutions

Marble track - hammer (Gravitrax compatible when using my basic tile)

Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…

Downloads
1,562
Likes
168
Rating
4.75
P
PrintablesJepod Designs

War Gaming Paint Racks - Basic Collection

Basic Collection This is a basic collection of a larger system available to be purchased here . I understand this system has been available for free for years. I greatly appreciate everyone's interest in this system and LOVE seeing…

Downloads
1,503
Likes
297
Rating
5
P
Printablessoundbylaura

HSW - Easier Inserts & Fasteners

Easier to insert into your Honeycomb Storage Wall. If the No-Tabs version is too loose, try a One-Tab version. As always, your mileage may vary. Includes: "Fasteners and parts for attaching hooks and objects" & “Parts for attaching…

Downloads
1,490
Likes
267
Rating
4.75
P
Printablesjs500

Tapestry Insert / Organizer - Fits All Three Expansions (Fantasies & Futures, Arts & Architecture, and Plans & Ploys)

This is an insert for Tapestry, including all three of its expansions (Fantasies & Futures, Arts & Architecture, and Plans & Ploys). Here are some of its features: Gives each landmark mini its own custom-shaped storage location. Supports…

Downloads
1,485
Likes
174
Rating
5
P
Printables3dPrinttsy

FIDGET POINTING PENCIL TOPPER FINGER, FOR EASIER LEARNING, PERFECT UNIQUE COOL GIFT FOR KIDS, BOOK PAGE TRACKING

Do you find it difficult to concentrate when reading a book and mix up sentences you read? We have something you will absolutely love! This is the brand new reworked and redesigned pencil topper which will help you concentrate while…

Downloads
1,484
Likes
184
Rating
4.8
P
Printablespeter m

Headband Brasil (V3)

This is the official design used by e-NABLE Brazil and if you are from e-NABLE Brazil's group please access http://e-nablebrasil.org/wp/cadaimpressaoconta/ to know how to print and assemble this device. This device has been tested and…

Downloads
1,405
Likes
5
Rating
0

Asimo Robot Print-in-place

I like this robot competition, I created another model, I really like the shapes and lines of the Honda Asimo robot , so I tried to model one as best I could. I used 4 different types of movable joints in the model - vertical, horizontal,…

Downloads
1,383
Likes
217
Rating
4
P
PrintablesMetikumi

Functional Washers for PETG/ASA – Various Sizes – LR Basics

This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…

Downloads
1,373
Likes
252
Rating
4.8
P
PrintablesMetikumi

Snap-in Pipe Clamp – Zip Tie Lock – 20-120mm – 0.8-5.5in - LR Basics

There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…

Downloads
1,361
Likes
148
Rating
5
P
PrintablesSolomoriah

Basic Fantasy RPG Pregenerated Characters

This collection of miniature figures, mostly around 32 mm scale (though Barthal may be a bit big for his kind), represents the standard pregenerated characters included in the BF1 Morgansfort multimodule for the Basic Fantasy RPG. It…

Downloads
1,331
Likes
201
Rating
5
P
PrintablesBrophet

Annoiying Gift Box - Easier Thread Printing

Original Text by @DAKUE1999 I've always wanted to make a gift box that's a bit annoying for the recipient. I saw an advertisement on YouTube for a similar box for €20 and thought I could make it cheaper. The box is 10x10x10 cm in size.…

Downloads
1,325
Likes
163
Rating
4.67
P
PrintablesJay Peero

Samurai Mask Model 3 Easier Print

Same mask as original creator just easier to print. I figured I would upload these changes after struggling to print the teeth. I am sure I am not the only one. Split the teeth model into two pieces. Original had teeth floating in…

Downloads
1,319
Likes
466
Rating
4.88
P
PrintablesBenjamin Faure

Basic Primitive 3D Shapes - Cube, Cylinder, Cone, Tube, Pyramid, and Sphere

Need a basic cube but don't feel like installing 3D software or firing it up to make one? Here you go. This is a small pack of 6 primitive shapes for whatever you may need them for. Whether it be test cubes, or stretching the cylinder…

Downloads
1,317
Likes
30
Rating
0
P
PrintablesMZ4250

Quasit Updated

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
1,306
Likes
55
Rating
4.5
P
PrintablesJDO solutions

Marble track - horizontal loop (gravitrax compatible by using my 6 exits basic tile)

A horizontal loop inset for the basic tile. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part to put the inset in:…

Downloads
1,293
Likes
161
Rating
5
P
PrintablesNaomi

Basic Cube - Blender

Literally just a couple cubes made in blender, one sized 1mm in X, Y, and Z, and one sized 10mm in X, Y, and Z. I have no idea how it took this long for someone to upload one. Category: 3D Printing Tests

Downloads
1,285
Likes
3
Rating
0
P
PrintablesVRaygel
18+

The source marked this model as adult content.

Downloads
1,282
Likes
265
Rating
5
P
PrintablesStranula

K2 Plus CFS Holder - Easier to Print and Stronger

READ FIRST : I provided two versions. I highly suggest printing the stronger version. When the CFS is fully loaded, the original version will sag. The stronger version stops this from happening. This is a recreation of @TozzEmak's K2 PLUS…

Downloads
1,278
Likes
177
Rating
4.89
P

ESP32-WROOM-32U Casing

ESP32-WROOM-32U Based WiFi Repeater Utilizes the ESP32-WROOM-32U module for powerful WiFi repeating capabilities. Enhanced signal strength with an external antenna (IPEX connector) for optimal performance. Firmware based on ESP32 NAT…

Downloads
1,240
Likes
83
Rating
5
P
Printables91d3on Mining

Linear Bearing Greasing Cap

Small cap for quickly greasing LM8UU (8mm), LM10UU (10mm), or LM12UU (12mm) linear bearings. The cap is designed to attach to a 3oz tube of Super Lube Synthetic Grease* and fits inside the linear bearing. Line up the holes in the cap with…

Downloads
1,228
Likes
207
Rating
4.97
P

Basic Shapes

This is a small sample of some of the simple shapes. This could be used for teaching children basic shapes. These models can also be manipulated to build other models. These are just made from the Tinkered basic shapes tool to save you…

Downloads
1,212
Likes
37
Rating
5
P
Printablesvidision

Basic Flat Shoe Inserts / Insoles / Filler

I needed 3mm flat inserts for a pair of boots to fill space under other third-party insoles. I made these and sized them to match the original inserts. Paired with the new insoles, the boots are a great fit. Now that I've started this, I…

Downloads
1,206
Likes
103
Rating
5
P
Printablesburkelarsen

Planter Pot Saucer/Coaster/Tray - Easily Scalable and Water-Proof

This is a simple yet very useful planter pot saucer I designed for use with round planter pots. Initially designed to be less noticeable and prettier than the deep plastic saucers that I can find at the garden store. I have seen other pot…

Downloads
1,202
Likes
178
Rating
4.92
P
PrintablesBubbleology

Watch Stand for Casio G-Shock

A 3D printable watch stand for Casio G-Shock watches and the like. It's easy to print and holds the watch securely. Features The watch stand takes inspiration from the existing model made by Alby312 . Starting from scratch I made mine…

Downloads
1,119
Likes
140
Rating
4.88
P

Sieve Set + Basin

Updated October 1 2023: Made a deep basin that will fit all of the sieves so you have a proper size container to sift into without making a mess. Added because as I've used the sieve with Walnut shell, tumbler shot, porcelain beads, etc…

Downloads
1,113
Likes
105
Rating
4.92
P
PrintablesWalnetto

Rocker Light Switch Cover Plate Basic

Fits standard Rocker light switches and Rectangle outlets Basic design with no embellishments for a single gang outlet Print your outlet's cover in your favorite material Don't pay 'big' light switch, another $0.75 ever again. Probably…

Downloads
1,098
Likes
102
Rating
4.86
P
PrintablesTiskarske stoly

Asiimov Karambit cs2

I used no supports. I split the model into two parts and then glued them together.

Downloads
1,097
Likes
251
Rating
0
P
Printableskjt270000

Basic Wind Turbine

A basic wind turbine design that can produce enough electricity to power a small LED light. I manged to print all of the parts on a stock Ender 3 using PLA, so it should print fine on any printer out there. How to print: Material: PLA,…

Downloads
1,090
Likes
443
Rating
0
P
Printableswimillie

Basic pla/tpu Bracelet

It be a bracelet A bracelet it be Turn your ears Listen carefully, This small bracelet Won't fit you If not made out of tpu! If you don't have tpu filament, the first version of this bracelet is not for you. Something very stretchy must…

Downloads
1,086
Likes
112
Rating
4.75
P
PrintablesGregO

ZWO ASI 78mm Astrophotography Cable Management Comb

A simple cable management comb for ZWO ASI cameras with a 78mm diameter. Fits snugly over the camera and provides support for cables coming off the back. Printed in ASA (or ABS) for the best fit and UV/temperature resistance. The inner…

Downloads
1,075
Likes
53
Rating
5
P
Printablesbatman

Articulated Spider limbs on runners (easier to print)

I enjoyed the Articulated Spider by @soozafone but struggled with bed adhesion on the frame, joints, etc. This runner includes the fiddly-bits but you will still need the following from the original files: Carapace Eyes Abdomen

Downloads
1,060
Likes
189
Rating
5