Search results: asier

Sort order

475 models

P
PrintablesHD_Creator

Miniature Vise 2.0 (much easier to assemble and 100% printable)

History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…

Downloads
24,102
Likes
4,212
Rating
4.85
P
Printablesjtuckwitz

T-Rex Chicken Arms modified for easier printing.

T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…

Downloads
2,602
Likes
269
Rating
4.83
P
Printablesdym801

Casiers Bosch L-Boxx 136

Différents casiers pour meubler une L-Boxx Bosch taille 136mm. Particularité : il faut imprimer 2 coins tels quels et 2 coins en mode symétrie . Impression simple en PLA ou autre, en 0,2mm sans support --------------------------------…

Downloads
1,023
Likes
195
Rating
5
P
PrintablesGraloth

Neutral Dude easier printing

The original model would require a lot of support, which would lead to worse surface quality. Using Prusa Slicer 2.6.0 (alpha 5), I split the base of the Neutral Dude from his body, and made them connectable via plugs. This way the only…

Downloads
164
Likes
13
Rating
5
P
PrintablesJim

Shaver protective cap for traveling // Rasierer Schutzkappe für Reisen

I used PETG as the material because it is not so tough but more elastic. PLA can break more easy. If the protective cap doesn't fit to your razor, try changing the dimensions in the slicer. I have made 2 versions. The one with both ends…

Downloads
36
Likes
7
Rating
5
P
PrintablesUnshodpen85088

Spatula with corners for easier removal of supports

This spatula have got special corners for easier removal of supports. Tested with PLA

Downloads
30
Likes
3
Rating
5
P
PrintablesStefan R

Holder for Razor / Halter für Nassrasierer

After dropping the razor in the shower again and again I was tired of this and made this very simple but effective holder. Printed fast and does its job. ----------------------------------- Nachdem ich mir der Rasierer gefühlt das…

Downloads
18
Likes
3
Rating
0
P
Printablesbatman

Dummy 13 (Beta) On Runners (Easier to print)

I was interested in printing the Dummy 13 but found that without the runners found on the Easy/Mini I had a hard time getting the parts to stick. I realize that the parts are “Beta” and @soozafone plans to make runners eventually but I…

Downloads
40,232
Likes
4,208
Rating
4.86
P

Bat Cat Batman Mask Even Easier

I just gave it a flat bottom so it sits flush on the build plate. All credit goes to the original creators. My cat was not willing to model it for me

Downloads
34,207
Likes
3,396
Rating
4.91

Flashforge Adventurer 5M (AD5M) - simpler, easier, faster drag chain termination at hotend (v1.0)

NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…

Downloads
4,511
Likes
526
Rating
4.88
P
PrintablesEcholalia

Tweaked Cat Key Hook (stronger, easier to print)

I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…

Downloads
3,915
Likes
755
Rating
4.85
P
Printablesbatman

Lucky 13 On Runners (Easier to print)

After realizing how much easier it was to print the 13 family of prints with runners, I decided to make a runner for the Lucky 13 since I had struggled to get that print to stick (which resulted in some interestingly misshapen ball joints…

Downloads
3,707
Likes
628
Rating
5
P
PrintablesDL

Echo Dot 4 Stand Alexa Mount Hippo, NEW divided version for easier printing

Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…

Downloads
3,348
Likes
524
Rating
4.77
P
PrintablesSkeletalPrints

Hollow Knight - Easier Printing

Cut off some parts for easier printing White - Jessie White PLA Gray - Galaxy Silver PLA Black - Jessie Black PLA Category: Sculptures

Downloads
2,630
Likes
339
Rating
4.9
P
Printablesbubo_bubo

Easier Print - Ancient Guardian from Zelda Breath of the Wild

Remixed for easier printing. No supports needed. Prints well with both 0.4mm nozzle/0.2mm layers and 0.6mm nozzle/0.3mm layers. Looks especially snazzy in coextruded silk PLA.

Downloads
2,627
Likes
420
Rating
5

Flashforge AD5M Enclosure Hinge - remixed to be easier to open and use (print-in-place Door Hinge) v1

NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…

Downloads
2,397
Likes
153
Rating
4.92
P
PrintablesPavel Brych

Venusaur - modular for easier print (Venusaur - modulární pro snazší tisk)

Venusaur pokémon has intricate flower on his back, which is quite hard or impossible to print on FDM printer in one piece (you would need soluble supports). Especially when printing smaller size figure. I used Venusaur body from…

Downloads
2,143
Likes
253
Rating
4.88

SpaceMouse Mini - Slim profile, with easier assembly and various improvements - v3

For a lot of helpful details/info please consult the main Teaching Tech listing here: https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix This final assembly video explains all about my remixes in this set:…

Downloads
1,853
Likes
720
Rating
4.86
P
PrintablesZkaza

Cat Water Bowl (Gravity Feed) + Easier Print + Legs

Even more slightly improved Cat Water Bowl, with just added legs for stability. Thanks to mitchell_cj for the original model and minar for improved one. Print instructions Printer brand: Creality Printer: Ender 5 Rafts: No Supports: No…

Downloads
1,675
Likes
283
Rating
5

Flashforge AD5M Enclosure Hinge - remix - easier to open, better door placement (print-in-place Door Hinge) v2

NEW VERSION v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the added…

Downloads
1,660
Likes
150
Rating
4.88
P
Printablessoundbylaura

HSW - Easier Inserts & Fasteners

Easier to insert into your Honeycomb Storage Wall. If the No-Tabs version is too loose, try a One-Tab version. As always, your mileage may vary. Includes: "Fasteners and parts for attaching hooks and objects" & “Parts for attaching…

Downloads
1,490
Likes
267
Rating
4.75
P
Printables3dPrinttsy

FIDGET POINTING PENCIL TOPPER FINGER, FOR EASIER LEARNING, PERFECT UNIQUE COOL GIFT FOR KIDS, BOOK PAGE TRACKING

Do you find it difficult to concentrate when reading a book and mix up sentences you read? We have something you will absolutely love! This is the brand new reworked and redesigned pencil topper which will help you concentrate while…

Downloads
1,484
Likes
184
Rating
4.8
P
PrintablesBrophet

Annoiying Gift Box - Easier Thread Printing

Original Text by @DAKUE1999 I've always wanted to make a gift box that's a bit annoying for the recipient. I saw an advertisement on YouTube for a similar box for €20 and thought I could make it cheaper. The box is 10x10x10 cm in size.…

Downloads
1,325
Likes
163
Rating
4.67
P
PrintablesJay Peero

Samurai Mask Model 3 Easier Print

Same mask as original creator just easier to print. I figured I would upload these changes after struggling to print the teeth. I am sure I am not the only one. Split the teeth model into two pieces. Original had teeth floating in…

Downloads
1,319
Likes
466
Rating
4.88
P
PrintablesStranula

K2 Plus CFS Holder - Easier to Print and Stronger

READ FIRST : I provided two versions. I highly suggest printing the stronger version. When the CFS is fully loaded, the original version will sag. The stronger version stops this from happening. This is a recreation of @TozzEmak's K2 PLUS…

Downloads
1,278
Likes
177
Rating
4.89
P
Printablesbatman

Articulated Spider limbs on runners (easier to print)

I enjoyed the Articulated Spider by @soozafone but struggled with bed adhesion on the frame, joints, etc. This runner includes the fiddly-bits but you will still need the following from the original files: Carapace Eyes Abdomen

Downloads
1,060
Likes
189
Rating
5

EASIER BOX CUTTER V2.0 - TESTED

UPGRADED EASIER BOX OPENER - TESTED Easy to use, easy to print, all with less filament use! Upgraded with stronger tip!

Downloads
1,045
Likes
181
Rating
4.89
P
PrintablesRafa

Christmas Lantern - easier to print

What I changed: BASE: Added a hole for a 37mm candle. That should save some filament and allow you to turn on/off the candle without having to take it out of the print. This is a very minor change, so if you are not sure what is your…

Downloads
1,022
Likes
173
Rating
5
P
Printablesdaytrader

SRAM chain gap adjustment tool V2 - modified for easier print ;-)

The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs. Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)

Downloads
954
Likes
27
Rating
5
P
Printablesmaggyswaggie

Larynx in Parts Easier Print

The voice teachers asked if I would print them model larynx's to show their students and the existing models either didn't come apart or were too fragile to print so I made some edits and the teachers love them. I struggled to get the…

Downloads
909
Likes
95
Rating
4.5
P
Printablesmarkury

Naked Iris Compass (Easier Assembly!)

Edit: Added v4 lid which now has nubs for easier turning, as a few have suggested. I didn't see any remixes yet so I added this one myself :) I noticed that the original model had a tendency to come undone and you can't really see what's…

Downloads
905
Likes
188
Rating
4.92
P
PrintablesOdd Inventor

Horse Saddle (Easier Print)

If you, or someone you know could benefit from a model/print like this (especially if you don't have access to a 3D printer), please reach out to us at [email protected] and we'll see what we can do. If you're enjoying models like this,…

Downloads
904
Likes
55
Rating
0
P
Printablesdym801

Casiers Bosch L-Boxx 102

Différents casiers pour meubler une L-Boxx Bosch taille 102mm. Particularité : il faut imprimer 2 coins tels quels et 2 coins en mode symétrie . Impression simple en PLA ou autre, en 0,2mm sans support --------------------------------…

Downloads
857
Likes
177
Rating
4.83
P
PrintablesWinged Hussar

San Jamar N16 Key/Paper Towel dispenser/Toilet paper dispenser Key *Easier to print*

I recommend use 6 bottom layers and 6 top layers to increase the strength of the part.

Downloads
850
Likes
57
Rating
5
P
PrintablesDaniel Fischer

Aquarium Moss Dome Plant Holder (easier to print) remix

This is a moss dome to hold down and protect any plants you may have in your aquarium.

Downloads
849
Likes
134
Rating
4
P
PrintablesBrett Shaw

Baldur's Gate 3 Artefact - Split for easier FDM print

Baldur's Gate 3 Artefact by uprisingfx - just split into 2 halves so I could print it better on my FDM printer, then I glued the 2 halves together. I had some very small supports for a couple of the ridges where I had split it. It's not…

Downloads
839
Likes
133
Rating
4
P
PrintablesPeter Jordan

HSW: Easier snap in / pull out insert for honeycombwall - Easy Plug

As I had some problems with removing (and inserting without a hammer) different types of inserts, I made my own version. This version has to be inserted in the correct way as it has a top (the thick side, see arrows on the back of the…

Downloads
829
Likes
158
Rating
4.58
P
PrintablesLord Radford

Harry Potter Flying Keys Remix for easier print

I wanted to print 4 of the Key variations but in a large quantity and fast with minimal post processing. I simply imported the models into the slicer, split them into their separate objects, scales accordingly so they merged well then…

Downloads
794
Likes
215
Rating
4.86
P
PrintablesHervea

Gift/toy - Jouet - Marble Run 2 scaled, extra wall and easier winder

Marble Run 2 rescaled to 102%, with extra wall to avoid balls jump out and easier winder. For 8mm metal balls

Downloads
759
Likes
127
Rating
5
P

Snapmaker U1 Tool Tray - New! Design with Extra Storage, Easier Access, Flush

This tool tray mounts directly in the front of the Snapmaker U1 using the shipping screws. It holds the scraper, snips, cleaning brush, hex keys, spare spring, spare screw bags, and has two extra storage areas. Fits flush to the front of…

Downloads
653
Likes
69
Rating
5
P
PrintablesMarcElbichon

Big Hero 6 - Hiro's bot remix (Easier to print)

I had some trouble to print reverse dome, so I remix it to be easier to print You need : 16x 9mmx5mm magnet 6x arm 6x arm base 2x head 2x middle 2x bottom 9x pin a little glue (optionnal) Please post your make ! Print Settings Rafts: No…

Downloads
646
Likes
114
Rating
0

Flashforge Adventurer 5M (AD5M) - simpler, easier, faster drag chain termination at hotend (v1.1)

NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…

Downloads
583
Likes
39
Rating
4.67
P
PrintablesDireLlama

Easier to attach base clamps for Elegoo Neptune 4/4PRO Cable Chain

Clamps for the Neptune4/PRO cable chain with the innermost beaks removed

Downloads
569
Likes
48
Rating
4.67
P
PrintablestbkMAKER

Wahl Clipper Guard Remixed (Easier FDM Printing)

This model was originally uploaded as an STL provided by @Hi_Im_Dave . It was a near perfect fit. I took it into fusion to add add a custom designed brim/mouse ear and then i noticed that the model itself had a lot of issues. In fusion I…

Downloads
566
Likes
51
Rating
5

Dummy 13 "V1 Ultrakill" Easier Wings

-Remixed and easier to print wings for V1 Ultrakill (Also Dummy 13 Remix) -Tolerances (X-Y compensation) must be around NEGATIVE -0.002/-0.005 for it to fit and not snap-break. Also you could use this compensation for the general build of…

Downloads
526
Likes
85
Rating
0
P
PrintablesAKinferno

Dual Portal Desk Toy - Remixed Base/Top (Easier & Scalable)

Props to Ada Cohen for an awesome model found here: Dual Portal Desk Toy by Ada Cohen | Download free STL model | Printables.com And the printed bearing Ada made for people who don't have 608ZZ bearings:…

Downloads
497
Likes
94
Rating
5
P
PrintablesBLawl

LOTR Lamp for MMU/AMS - No Paint required - Easier print

Intro I already had some Silk Gold PLA and was able to fine tune it for ring shapes. So I tried using slicer based “painting” to change Jéjé's model to print a light yellow color for the letters and the gold for the outer area. It sort of…

Downloads
490
Likes
226
Rating
4

Side mount for improved and easier loading on the Qidi X-Max 3

Side mount for improved and easier loading on the Qidi X-Max 3. Compatible with the dry box. The box is rotated 45 degrees but the stays desiccant bag stays in place just fine. The bracket fits snug into the side handle. I printed this…

Downloads
459
Likes
58
Rating
4
P
PrintablesJohn S

Cable Chain with Rounded Corners for Easier Printing

remix of https://www.thingiverse.com/thing:11978 Just rounded some corners to minimize corner bulge and ringing so that I could print faster and still have a nice free chain movement. Print instructions Category: 3D Printer Parts

Downloads
449
Likes
19
Rating
4.5
P
PrintablesSpedi

Lego Head Planter - easier print

Over on Thingiverse, 3DJake uploaded a design of an enormous Lego Head Planter (https://www.thingiverse.com/thing:4907535). I tried to print it several times with no luck because I couldn't get the overhangs right. Even with support…

Downloads
445
Likes
95
Rating
5
P
PrintablesAndreas

Battery beer crate with additional cut-outs to make it easier to insert the batteries.

I just added some cut-outs to the dividers, based on a real beer crate design. This makes it easier to slide the batteries in. Thanks to CAD-Guy for the great design!

Downloads
406
Likes
46
Rating
4.92
P
PrintablesBittins

Slim Azul Tray with Easier Pickup

A slim tray to store the discarded tiles. Refilling the bag has never been easier! I wasn't a fan of the original tab used to pick up the tray, so I redesigned it from scratch and added a finger hole to make removing it from the box…

Downloads
403
Likes
57
Rating
5
P

Print-In-Place Folding Laptop Stand (Easier print remix)

The original model has a very small contact patch on the hinges and requires stronger bed adhesion than I could consistently achieve. This is a few minor changes to support the print in place hinges during printing. The small contact area…

Downloads
386
Likes
53
Rating
5
P
PrintablesAlzibiff

Shaun the Toilet Sheep - easier to print/use

My remix of a brilliant model by Koobj which made it easier to print for me.

Downloads
379
Likes
54
Rating
5
P
PrintablesFinn K

Rasierer Halterung

Rasierer Halterung fürs Badezimmer, am besten mit Doppelseiteigem Klebeband festmachen.

Downloads
378
Likes
25
Rating
1

Flashforge AD5M Enclosure Hinge & Handle FOR MINIMAL ENCLOSURE - remixed to be easier to open and use (print-in-place Door Hinge) v3

This v3 of the AD5M door hinge for DIY enclosure is expressly for the Minimal enclosure and its remixes. It repositions the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as keeping…

Downloads
376
Likes
44
Rating
5
P
PrintablesTobashadow

Popeye Statue Split for easier printing

Split for easier printing, muscle2a has meshmizer supports added. Category: Models

Downloads
366
Likes
31
Rating
5
P
PrintablesSemperDiscere

Voron 2.4 Panel Locks Easier Print 6mm

Same as the Voron Panel Locks, Larger separation (easier print in place) but for 6mm total thickness. Used for 3mm Acrylic + 3mm Foam. Corner Panel pieces may not fit on the front edges depending on your hinge location, use the straight…

Downloads
361
Likes
62
Rating
5
P
Printablesnzalog

Dog AirTag Collar remix - Easier to print with F3D file

Made some modification: tighten tolerances around hex nuts reduces bulk of back (to avoid back pressing on dog) made it easier to print (see image for recommended print orientation) tighter fit to my pup's Julius K9 harness. matched the…

Downloads
357
Likes
35
Rating
5
P
Printablesdesaster

Focusrite Scarlett 2i4 2nd Gen bracket (easier print)

Under-table mount for Focusrite 2i4 2nd gen audio interface This is a remix of the 2i4 bracket by DJERO . The design has been modified to be printable on the side, and require no supports. Printing on the side should also make the tabs…

Downloads
351
Likes
47
Rating
5
P
PrintablesMrKiryan

MultiBoard easier fit snap

If like me you are using the 8mn away from the wall version of the Multiboard, you might be worried to break a panel while adding a new snap. It happened to me twice already :( Therefore here is a slighly easier fit snap with which I had…

Downloads
349
Likes
40
Rating
5
P
Printablesadesir

Casiers pour rail T-Track

Casiers pour vis et petits outils qui s'insère dans un profilé T-Track (MFT Festool ou équivalent). Taille de 120 x 80, d'autres dimensions seront proposées si besoin, la conception d'origine étant paramétrique. 2021-01-07 : ajout d'un…

Downloads
344
Likes
80
Rating
5

Remix - Creality K1 D3vil Burner Knomi V2 - Easier to print

Slightly modded version to make it more easy to print

Downloads
342
Likes
34
Rating
5
P
PrintablesLockManipulator

K1/Max Stepper Motor Cover (remixed for easier printing)

Changed fillets to chamfers for easier overhang printing.

Downloads
339
Likes
32
Rating
5
P
Printablesscattercat_123

Gomboc. Scaled and easier to print

Infill - 100% layer height: 0.1 Dont know what is a gomboc? search it up. Thanks @MarcelBencek_3205250 for suggesting changes to the original model which i have improved by remixing. Also the scale of original was less than 1mm so i had…

Downloads
322
Likes
18
Rating
0
P
Printablesdivided joy

Improved holder for easier loading

Added a little handle for easier loading

Downloads
307
Likes
30
Rating
5

Flexi Guardian - Easier Print and Rotating Head (Zelda Breath of the Wild)

This is a remix that combines the features of the two remixes it's based on: Makes the head rotatable by hand Adds some structure so parts of the base don't detach so easily from the build plate I just merged things in Blender, credits go…

Downloads
300
Likes
23
Rating
4.33

Rolly Toys Kupplungbolzen/Hitch Pin (Modified for easier printing)

Slightly modified version of original, as that one would detach on my glass-bed equipped printer every time. Added a scaled cube with Blender that extends the bottom layers from 3 thin lines to one rectangular area.

Downloads
284
Likes
12
Rating
5
P
PrintablesNem

Easier/faster caps for "Pill Box / Outdoor Container"

Kudos to PointNemo for the original design - I love these little bottles! (Vielen Dank! Ich liebe diese kleinen Fläschchen!) A lot of folks are guilty of this, so I don't want to disrespect the original designer, but there is just no need…

Downloads
283
Likes
37
Rating
5
P
Printablesanilgunduz

Easier Hornet Needle

The original two-part needle assembly is quite hard. This is more easier to print.

Downloads
283
Likes
9
Rating
5
P
Printablesblaf77

Robot vacuum ramp, modular, stackable for easier storeage

Modular stackable robot vacuum ramp to override 25mm difference in floor height. Works as is, but could be improved-reinforced so stepping on it would not break it. Stackable to save space when not in use. First thing I ever printed.…

Downloads
274
Likes
32
Rating
0
P
PrintablesSteven

Wandering clock stand for Desk/bookcase with integrated wall mount -easier build - no ikea clock required - geneva drive

Important: pause at about 7mm when printing the frame to insert two M4 nuts as they are dropped into the cavity and then enclosed in the print This is a frame and stand for the wandering clock model:…

Downloads
266
Likes
72
Rating
5
P
Printablescodexmas

Cut up AMS riser parts for easier printing

Created with Orca Slicer 1.6.6 Layer height 0.28 Gyroid infill 8% Small amount of tree support for true overhangs. Added them after the first plat printed but had a lot of stringing.

Downloads
246
Likes
33
Rating
5
P
PrintablesDomLuck

Dissecant Spool Container, Fixed, Reinforced and Easier to assemble,

I was having a real hard time assembling the container so I increased the tolerances for the walls and also added reinforcement colluns to the walls because it was getting all scrunched up when I tightened the lid. I also fixed a weird…

Downloads
240
Likes
36
Rating
5

Yet Another D20 Dice - Easier FDM Printing

A basic D20 dice. Nothing super special. I did reference the proper design of a D20 dice, so the numbers are not randomly assigned. I did a re-design to remove the ridges and inset the numbers, I find this prints nicer on FDM machines…

Downloads
238
Likes
10
Rating
4.33
P
PrintablesJoe McLoughlin

Easier Christmas Card Tree

I added a Merry Christmas! to the frame, and added a .8mm fill on the spiral tree bits to make it easier to print. The whole model is also scaled to 175%

Downloads
233
Likes
45
Rating
4.75
P
PrintablesVSVlab

Storage box for pencils, felt-tip pens.../ Casier de rangement pour crayons, feutres...

EN Updated 27/03/2025: Modification of ‘CPF-BASIC’, ‘CPF-CG’, and ‘CPF-CD’ to add a foot for horizontal use. Addition of ‘CPF-Pied Storage box for 72 markers, pens, pencils, etc. Square slot, 1.5 cm square, with 6 rows of 12 slots. Parts…

Downloads
232
Likes
32
Rating
5
P
Printables3Dietzmann

Cheap, minimalistic razor holder/ razor stand // günstiger, minimalistischer Mühle Rasierhobel Halter, Ständer

The majority of razor stands are big, heavy and expensive to print. I designed a cheap and minimalistic one for my Mühle Rasierhobel/ Mühle razor plane. Instead of the original Mühle one, that costs around 25 Euro, my alternative costs…

Downloads
232
Likes
35
Rating
5
P
Printablesavcy

Eye of the Universe (Easier to print)

Remix of @Quarren42's model with the whole model reaching the build plate, prints easily with a brim. 3mf should be multi colored, made in Bambu Studio for the AMS. Mount with a command strip.

Downloads
229
Likes
25
Rating
5
P
PrintablesNikolaJesse

mini vuvzela, big sounding, less support material, faster and easier to print.

loud mini 3 piece horn. easy 1.5 hour print. 32 grams.

Downloads
229
Likes
13
Rating
5
P
Printablesoltas

Complete remix Sensorbox: E-Paper, LCD, better temperature, easier to assemble, no screws on front

Complete remix, no visible screws, easier to assemble, better temperature sensor placement, 2 LCD types and 2.7 E-Paper.

Downloads
224
Likes
44
Rating
4.83
P
Printablescncmike4

Blank key tags for easier easy printing.

How I do it in Bambu Studio! Keytag Blank: Font: Agency FB Size: 6.00 + Bolt Thickness: 0.40 --------------------------- Set key tag to center. Add text. Move text in Z to 0.6. Printer BBX1C Material PLA 3mf File included

Downloads
216
Likes
15
Rating
5
P
Printableschrisxbarb

Wahl Shaver Lever | Wahl Rasierer Hebel

Print it with supports on bed only. PETG worked best for me. You could use the 3MF file and adapt your own settings if needed. If you like it, give me a like and post your make! Enjoy and happy printing! :-)

Downloads
215
Likes
9
Rating
0
P
PrintablesFreestyleEngr

Modified Face Shield RC3 - Easier to print

I was having blobbing and other issues while printing. I removed the logos and added printing discs to increase bed adhesion. Print instructions Print at 0.28mm layer height, 3 walls, 25% infill.

Downloads
212
Likes
0
Rating
0
P
PrintablesDalvin

Deadpool bust MMU / File "fix" for easier assembly (I think)

When downloading and importing the files from the original model, I had a hard time arranging the models bcs Prusaslicer dropped them all down to the build plate and I have no way to disable this. So I loaded the files into 3D builder…

Downloads
212
Likes
13
Rating
5
P
PrintablesJosef Selinger

Gillette razor holder / Gillette Rasiererhalter / Držák na holicí břit Gillette

- easy print / einfacher Druck / jednoduchý tisk - no supports / keine Stützen / bez podpěr Just stick with double-sided tape / Einfach mit doppelseitigem Klebeband festkleben / stačí přilepit oboustrannou páskou

Downloads
209
Likes
10
Rating
0
P
PrintablesDeadCatAlive

XT60 Cap and Charge Indicator - ribbed for easier removal

This is an XT60 cap to prevent shorts when keeping LiPo batteries in a bag and to indicate charge. It's ribbed for easier removal, even with a tight fit. Also included is an STL as a regular cap instead of a doubled one. Pause the print…

Downloads
207
Likes
27
Rating
4.5
P
PrintablesMiccoPlast

Bart Schablone Rasierhilfe shave aid template

Eine Rasierhilfe/schablone mit Kamm um Bart Konturen schöner hinzubekommen.

Downloads
199
Likes
18
Rating
0
P
PrintablesSegan Designs

Noctua 120 to 140 Fan Adapter - Easier to Print

A simple remix to make the model easier to print. I removed the overhangs so it can print flat on the bed without support. I printed in PETG and it fits like a glove. Thanks Noctua !

Downloads
199
Likes
25
Rating
4.67
P
PrintablesBovideus

Frostmourne (easier print)

All credit to Blizzard Entertainment and HotCheeseSoup. All I've done is split HotCheeseSoup's model down the middle so it can be printed in 2 flat-bottomed pieces and then glued together. Note: Print with support so the horns print…

Downloads
199
Likes
17
Rating
0
P
PrintablesGariveda

Samsung Jet Accessory Hanger Easier Print

I guess I don't value extremely rounded vertices as much as everyone else. I flattened the top of this accessory holder so I could print it w/o the first few layers having extreme overhang that resulted in a messy print or lots of supports.

Downloads
191
Likes
23
Rating
2
P
PrintablesEmveor

Re-engeneered catbox for reliability and easier printing

V2 design: -Changed the lid design to add it some weight. -The base design MUST NOW BE INSERTED FROM THE TOP OF THE BOX. -The wall mounter has built-in supports that prevent it from falling off mid-print. theese 0.4 thick walls must be…

Downloads
190
Likes
27
Rating
4.5
P
PrintablesUli

Braun Series 9 Pro Rasierer Wandhalterung Reinigungsstation/Razor cleaning station wall mount

Ich benötigte eine Wandhaltung für meine Braun Reinigungsstation. Da ich die Kartusche nicht dauerhaft in der Reinigungsstation eingebaut habe, sollte diese außerdem über ein extra Fach dafür verfügen. Wer dies nicht mag, kann hier…

Downloads
188
Likes
15
Rating
5
P
PrintablesDeleted

Bamabu P1P Separate Armor Parts for easier printing

Not actually a remix but that was the only option for uploading that was close.

Downloads
175
Likes
25
Rating
0
P
Printablesjpoles1

Ticket to Ride Card Tray Organizer - Easier Print

This is a remix which is slightly easier to print than the original if your bed adhesion isn't immaculate. In the original, the individual rail ties of each rail in the base of the cardholder must be printed individually and in my case a…

Downloads
172
Likes
24
Rating
0
P
Printablesrbx;-)

Update - usb-C dust cover for Android smartphones - easier to remove

slimer, better fit and easier to remove Improvment to my earlier design: https://www.printables.com/de/model/783667-usb-c-dust-cover-for-android-smartphones-with-ultr There are some usb-c dust protectors on printables but they were too…

Downloads
172
Likes
21
Rating
5
P
PrintablesDeadCatAlive

XT30 Cap and Charge Indicator - ribbed for easier removal

This is an XT30 cap to prevent shorts when keeping LiPo batteries in a bag and to indicate charge. It's ribbed for easier removal, even with a tight fit. Also included is an STL as a regular cap instead of a doubled one. Pause the print…

Downloads
171
Likes
25
Rating
5
P
PrintablesMercur12

MMU3 CORE One Mod with standard top cover foldable for easier service

The model was modified to allow the stock cover to be opened. For this, the rear brackets were equipped with heat-inserts to secure the hinges. For the lid, I used the "Prusa Core One Magnetic Top Cover with Integrated Vent Handle"…

Downloads
168
Likes
60
Rating
4.86

Easier to print low poly snake

Low poly flexi snake

Downloads
167
Likes
13
Rating
5
P
PrintablesUlli

XT60 connector grip / handle for easier release of the plug connection

Printing in TPU provides the necessary flexibility when attaching the handle.

Downloads
166
Likes
37
Rating
0