268 models
Case for Atari 1050 / XF551 floppy power supply unit. Krabička pro napájecí zdroj disketové jednotky Atari 1050 / XF551. Print instructions english text bellow ==== CZ ============ Napájecí zdroj pro floppy Atari 1050 / XF551 Jde o návrh…
I was fed up not being able to get reliable sized SIO plugs when I needed them. norm8332's was sized to print with ABS, piep3d's was sized just a little too small making the plug loose in genuine sockets and the crimps hard to get into…
Atari 2600 Video Game Console with Joystick. Please resize to your needs. I think I need to make the joystick into earrings.
CZ: Veškeré návody k výrobě i použití v češtině naleznete na této stránce: https://3d.odkaznik.cz/sdrive-max SDRIVE-MAX This version of case is completely re-designed from scratch. When designing and selecting the hardware, I solved the…
A support free, easy to print stand that holds 8 Atari 2600 Games.
Retro Gaming Light Switch Covers Transform your standard wall switches into a nostalgic homage to classic gaming consoles. This project includes three interchangeable designs: the Nintendo NES D-pad, the Sega Master System D-pad, and the…
Notes Fits my display stand for the Sega Game Gear in height and vertical angle.
Another request for a Ghibli character. This time it is Susuwatari aka Makkuro Kurosuke aka Dust Bunny aka Soot Spirit. I decided to offer this puff ball in three sizes 90mm, 70mm, and 50mm. I have been asked to include the Sugar Cookie…
A 3d printable top case for the Atari STFM, it comes in two variants. The first variant is an all in one (ish) that can be printed an large format printers or professional print houses, the long standoffs at the rear are still separate…
New case version for Rev. 2.2.0 USB. This is a case for SidecarTridge for Atari ST. Print it from PETG or PLA. Support and brim are not needed. Use a piece of clear filament as the light pipe for the RP pico LED. The top and bottom just…
Yep, that infamous 80s Atari 2600 video character!!!
This ring holder captures the essence of nostalgia, making it a must-have for any gaming enthusiast. But this ring holder doesn't stop at aesthetics alone. Inside the joystick replica, you'll discover a cleverly concealed storage…
In my attempt to find a way to organize my Atari games, I purchased an older CD storage tower. I was not happy with just stacking the games on the shelves, so I designed an insert with slots for the games so you won't have to worry about…
I designed these cartridge cover to stop dust from collecting in the Atari Jaguar's cartridge slot. The cover is slightly press fit to be held in place by friction without damaging the console's shell.
This is an Atari 2600 Paddle controller, designed to work with your computer to control volume, play/pause, and even add your own features. It is centered around an Arduino Pro Micro (clone board) and requires a rotary encoder and micro…
Since I started to play with Atari ST emulators, Aranym and Hatari, about 10 years ago, I always had the objective to build a computer booting an Atari system with the highest compatibility possible and with strong performances. The…
Podrobnosti česky najdete zde: https://3d.odkaznik.cz/sio-m The socket is used in all types of 8-bit Atari computers and their peripherals as an SIO bus connection point. The socket can be used to build modern peripherals or used as a…
Cover for Atari 800 XL PARALLEL BUS. Fits perfectly. Made according to the original cover. --- Krytka pro Atari 800 XL. Print instructions =====EN==== Cover for Atari 800 XL PARALLEL BUS. Fits perfectly. Made according to the original…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
This is a shell for the version 3 pcb of the Sidecartridge: https://sidecartridge.com/products/sidecartridge-multidevice-atari-st/ This shell only fits the version 3 pcb and assumes that you have flush solderied the Raspberry Pi to the…
Jde o návrh napájecího zdroje 5V pro počítače řady Atari XL/XE. Napájecí zdroj využívá nového průmyslového spínaného transformátoru MeanWell a běžně dostupných součástek. This is a design of a 5V power supply for Atari XL/XE series…
Atari XL Cart (ish) design to fit the OSS 4-in-1 (short) board on PCBWay https://www.pcbway.com/project/shareproject/OSSCART__OSS_4_in_1_Short_Cartridge_for_Atari_400_800_Computers.html Category: Computer
CZ: Informace v češtině můžete najít zde: https://3d.odkaznik.cz/sio2pc SIO2PC USB Adapter allows fast uploading of games and programs from PC to Atari. Print settings: Rafts:Doesn't Matter Supports:Doesn't Matter Resolution:0,2 Filament…
Items you need: 2 x “4mm x 30cm” paracord. *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). *2 x “12mm” wiggly eyes. Super glue (for the eyes and magnets). *If you do not have…
Another remix of the excellent Rugged Box this time for storing up to 20 loose HuCard / TurboChip games in their vinyl sleeves. I have included 2 lids so you can print PC Engine style or TurboGrafx 16 style boxes in multi-color glory. You…
Simplified Atari ST case suitable for FDM printing Please see my VGA32 case version for one with a PCB cavity https://www.thingiverse.com/thing:5242004 Category: 3D Printing
I designed this cart storage module for my limited cart collection, it’s handy for sitting next to my computer when playing. I sized the holes just big enough to fit the AVGCART so it will hopefully also fit SIDE 2&3. Normal carts…
Straight from the fire-scorched world of Lothric in Dark Souls III , Siegward of Catarina makes his noble entrance into your 3D printing lineup! Known for his unmistakable onion-shaped armor, his valor, and his unmistakable…
Print off the parts, and paint as you see fit. I've included a printable template to allow you to cut out a sticker from a woodgrain drawer liner if you want to give it that more authentic feel. You can find the video on the build here :
Visit Jerrari3d.com for more related projects _________________________________ The RETRO GameStack system is a fully customizable and modular storage solution designed specifically for your Atari 2600 game cartridges. Unlike pre-made…
Just a simple Atari Lynx Display stand. Works fine with PLA filament and don't forget to add structural support.
simple printable dragon from Atari's Adventure. Yellow Yorgle Green Grundle Red Rhindle
Cover for the 9pin Joystick ports on the C64. Could glue in bit of antistatic foam for tighter fit if needed. I tested this on a C64 breadbin and the Ultimate64. Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .20 Infill:…
STL VERSION RELEASED! - It is time (after 2+ years) for this model to be freed from my Patreon I grouped the three handle versions together because I couldn't stop them from laying on their side in the slicing software and it's a pain to…
Display stand for the Atari 520 ST FM. Used in pairs. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Infill: 20 Filament: Generic PLA Grey Category: Computer
Introduction This cartridge case fits boards similar to the A8 Pico Cart. The case is made such that it provides a comfortable grip and easy access to the reset button on the front. You're going to need 2 M3x18mm screws to assemble the…
3D printed in multiple PLA filaments, and painted with acrylic paints Recommended to print with 0.2 nozzle for better detail, but 0.4 nozzle should work as well. If your printer can't print the combined model, the keycap (upside down) and…
I designed this cover to give the Atari Jaguar's controller port area a cleaner look while the controllers are in storage. It's held on by just enough friction to stay in place and not damage the shell.
This is an Atari 8bit comuter (XL/XE) cartridge case designed to fit GRAND IDEA STUDIO Pixel Past PCBs . Botom part comes in two heights 9mm and 12mm, the later is to fit socketed chips. Print Settings Printer Brand: MakerBot Printer:…
My Patreon ----- https://www.patreon.com/Valda3DPrinting ATARI Logo as Lightbox lamp Choose your color scheme from slicer You will find each file named by color for an easy setting. Import them in Bambulab/Orca as single object with…
Atari 2600 Display Stand About This display stand is made to hold the Atari 2600 Console in an upright position while providing you with a slot to stow the hardwired cable and two slots to display cartridges in either an upright or…
This is an accurate clone of the real Tempest spinner knob that will fit onto the “Arcade Spinner for Arcade1Up” encoder. The hole will slot right over the spinner body's shaft and will either pressure fit or you can hold in place with a…
I had some parts spare so made a housing for it. Joystick is a Sanwa style. The flat round dust cap for the stick fits into a recess in the top housing and is fitted before the stick is mounted. The sleeve and ball are attached from the…
My own remodel of A remodel of the Atari ST/Falcon standoff for the floppy drive, fit exactly to the PCB. Designed with Designsparks Mechanical, STP file included.
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
Modified the original design to fit the Raspberry Pi Zero. The full project I made can be found here: https://imgur.com/a/8NWwu9x Category: Video Games
The original Atari ST PSU can easily be replaced with a MeanWell RD-35A . However, what I disliked was that the mains wires were not fixed, and the terminals were not protected from accidental touching. Read my blog article about the…
Please use TPU or some other flexible filament with no supports
This is a replacement optical wheel for a 4.5" Atari trackball used in several Atari arcade games from the 1980s. These include Missile Command, Football, Baseball, Basketball, Soccer. There are two versions of the wheel. The original…
3D Printable Atari ST Styled case for the VGA32 ESP32 Board Also are the two pieces separate for smaller printers. Category: 3D Printing
Yep, that infamous 80s Atari 2600 video character!!!
This is a merger of 2 models: Atari 2600 Console - Keychain by Demolition88 and a minimalist wallet by 3dWorkBench. Attributions are printed into the wallet. Instructions is mostly identical to my NES Cartridge card wallet.…
A chibi deformed model of Siegmeyer of Catarina, a famous storyline NPC in the video game Dark Souls. The model won't balance well due to big head. It needs assistance (e.g. double-sided tape or combine with a base) to sit steadily. Lower…
I was going to just clean up the couple of small issues I had with the original but Tinkercad refused to import the original or the PBI port door it was remixed from. I took the simple approach and just drew it again. I've done this in a…
I designed this cover to keep dust out of the Atari Jaguar CD's cartridge slot. It's slightly press fit and held in place by friction without damaging the shell.
Files to Print Required Print the appropriate files named "[region]_Display_Bottom" for the cartridges you want to display. Then for each additional cart, you can print the files named "[region]_Extension_Cartpiece", and simply screw them…
This is a little shelf/rack for holding Atari 2600 and similar-size (e.g. 7800, possibly others like Intellivision?) cartridges. I intended it to be easy to print and easy to stack/superglue together as needed. The default model holds 4…
I needed something to organize my cartridges, so I whipped this up in Fusion 360. I've included the Fusion 360 design files. There are two copies of the model in the file that I used to test the fit, and there's some slight interference…
Atari Joystick Box. Add your own booleans to make magnet holders. This is intentionally left unfinished so you can resize the joystick then add your own magnets to make top magnetically adhere to bottom. Feel free to post your…
The Atari 800 is my favorite of the 8-bit computers but they are more useful with modifications. Incognito and Sophia 2 are perhaps the best two currently. Both require additional controls like a DVI port or a button to change the…
https://lotharek.pl/productdetail.php?id=244 A case for this adapter, scale it in 0.5% increments until there is a pressure fit Category: Computer
Wall mountable Atari Flashback wireless controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) A v2 has been made due to this…
This is my reproduction Atari 2800 - Sears combined Joystick and Paddle controller. The video build guide You can find the PCB at PCBWAY But you will need to order 5. I will have a few on my store along with some parts if you're in the UK…
Update 04/08/25: After an excellent idea was put forward by Rainer (ArKay74), I set to work splitting some parts so that you could print the two tone colour scheme without owning a multi-colour printer. There are six new STLs with the…
Alternative case options for your 576NUC+ https://atari8bit.net/projects/3d-printing/576nuc-cases/
This prints as a single piece and then folds shut with a nice snap lock mech. Don't try to print this as separate pieces as you will never be able to put them back together again as the hinge has tight tolerances and is designed to be…
I designed these caps to protect Atari Jaguar controllers while they're in storage. The Atari Jaguar uses a common VGA like DB15 connector for it's controller ports. Unlike other hardware makers, Atari decided to have the male end of the…
Monster from the horror-themed, now barely functional MMORPG Requiem: Bloodymare / Memento Mori / whatever. Eight different poses. Blender is able to import animation files for most models from this game, so more poses are possible if…
Protect your console cart port from dust ect. Use supports, obviously. I do 3 walls minimum on all prints. 15% Infill.
This connector back shell fits around the guts from from a DB-9 female solder cup to create an Atari style joystick plug. The fit up is pretty fiddly, will need to scale or adjust sizes to match. Crimp style DB-9 connectors I tested were…
— english text below — Zařízení umožňuje připojit ke sběrnici Atari více zařízení současně - např. SDrive-MAX, magnetofon, floppy, tiskárnu a další periferie se SIO konektorem. Podrobnosti česky zde: https://3d.odkaznik.cz/sio-splitter…
Wall mountable Atari Flashback wireless controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) Check out all my other video game…
Lever for floppy drive Chinon FZ-502. Used also in Atari XF-551 Floppy (360kB) Spare part.
This is a recreation of the chassis for the classic Atari 850 interface module, described here: http://www.realdos.net/Atari%20850.html This model comes in two parts, and each requires supports to print correctly, due to the openings in…
A good friend of mine recently designed a replacement stick for the old Atari 2600 game console controller. https://www.printables.com/model/1033596-atari-2600-joystick-insert-upgrade The rubber boot for my old controller was in extremely…
This is a remix of the Ericsnis's Joystick Slot Cover. I jury-rigged the back clips in place with some drywall screws, so his site might have a better description of what you should actually use to hold it in place. I wanted something…
Krytka na video kabel pro Atari Jaguar
ATARI ST Mouse Kit is a shell that fits Wireless Mouse Components Kit 002 . There are 3 versions included. With Atari logo, no logo, and ZX logo ( LOL :) ) https://eu.store.bambulab.com/products/wireless-mouse-components-kit-002 Buttons…
I have made this design based off Atari 2600 console. Why? I wanted to feel a cool breeze now in winter of course. And also for drying up painted models :) Whole kit printed on PRUSA MINI+. Hardware used: Halfround M2x8mm screw - 4x (Used…
Printed with 3 walls, 20% infill and a modifier to iron only the top of the model. I had to increase the size to 102% to fit all but one of my cartridges and 104% for the Air-Sea Battle cartridge. Add support blockers on the sides but…
the River Raid is a nostalgic video game for Atari 2600 and released in 1982 by Activision. River Raid was one of the best selling-games of 1983 and the second best-selling Atari 2600 video game of the year(wikipedia) I have made a 30 x…
Vhodné pro tisk na MMU, ale da se vytisknout treba i jenom zakladni klavesa s embosovaným logem.
Susuwatari keyring I made for a friend and thought many people would like it here as well.
I style Atari ST case for your Gotek. Fit and stay on top of the computer case. FOR OLED DISPLAY 128x64.
The APC (Atari Punk Console) is some kind of noise toy. Its circuit was originally described in the early 80s but it was such a hit that it's become something of a go-to project for folks new to electronics and soldering! There are tons…
This is a simple knob to upgrade the knob on the gamestation go. It's pressure fit. I sized it so it wouldn't interfer with the buttons. Just carefully press over the existing knob. Should be able to pull straight up to remove with no…
As a kid of the 70s, I enjoyed playing games on Atari 2600 and Atari 800 computer systems using the joysticks that came with the 2600 systems. Fast forward to now with Retropie and emulators, I wanted the real game experience with the…
In an attempt to free more space on my retro games shelves, I have been finding these sorts of cartridge racks and printing them. Then I started making some. This is my Atari 5200 cartridge rack. It did free up some space on my shelves,…
Este modelo no refleja el original es solo un prototipo “Atari 800XL” Nota: Aprendiendo a usar Fusion 360. Saludos
Coaster set for Ken Mills' Atari Joystick - NO AMS I wanted to have some cool retro gadget in my gaming room, that is when I've found Ken Mills' Atari Joystick ring holder:…
An epic, highly detailed collectible figurine of the Sinister Blade, Katarina, from League of Legends . Rendered in a striking, vibrant orange finish with a subtle metallic sheen, this powerful sculpture captures the character in a…
This is a belt I made to repair my floppy drive. It must be printed from flexible material like TPU, possibly others, but TPU worked for me. It just takes a couple of minutes to print. Category: Computer
Alternative case options for your 576NUC+ https://atari8bit.net/projects/3d-printing/576nuc-cases/
Atari 65XE Display Stand modified by Siliconix
I made small modification to Atari SIO plug in order to fit in the FT232RL USB to serial board from ebay . The board dimensions are 26x16mm without pin header. In the Atari plug I used 3.96mm pitch contacts (for example ). To wire the PCB…
This was created as a birthday present for a friend. I took a model of a standard MX Keycap (row 1) and added an extrusion of an SVG of the Atari logo. Prints best a 0.1mm layer height. I printed this with a 0.4 nozzle, but it would…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
