3,295 models
From the well received GREATEST Towel Hook V2 now an Remixed Version that can be hang on a door without using tape or screw I really liked the original model but i didn't want to attach it with tape or screw, so i remixed it to be hang on…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Wooden Crates and Lumber Even in the future, people need materials to build with. Plants, wood as the backbone of many a backward planet's building strategy. Wood is use to make exquisite furniture, paneled walls, and more. In the lower…
Print approx. €5.28–€6.45 excl. taxPreliminary estimate for one variant
Overview: Easily replace your old or broken outlet covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations for standard…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
I designed an extensive set of round-corner templates for woodworking. They can either be used to mark corners with a pencil or as a template with a flush-trim bit. There is a wide range of radius sizes from 5mm up to 200mm and 0.5" to…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
A bust of Socrates. Includes a base with his name. One of my first 3d models, any feedback is appriciated.
Print approx. €5.54–€6.77 excl. taxPreliminary estimate for one variant
Rank plate for ACH Helmet NVG mount for when no NVG mounted
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
2 gang box is 4.5x4.5 cutout so conduit box can mount low current box cutout for single gang snap-in box
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Distance plates for vesa 100 mount
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for PETGSource material: PET
13 different sized radius templates. This is used for creating radiuses from 0-3 inches using a trim router on wood, aluminum or plastics. The template gets traced with a trim router and tracing bit as shown in the pictures. I attached 2…
Print approx. €6.85–€8.37 excl. taxPreliminary estimate for PETGSource material: PET
Colored plates for Bergeron720's dishwasher sign . Supports single nozzle; no MMU required. Parametric. You need to download and print the base unit from Makerworld, then use this design for the insert plates. Customize You can customize…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant
Set of HotWheels and Matchbox logos. Use a pause in height to change color. STEP logo files are included and can be edited. For non-commercial use only. Printer setup: Nozzle diameter 0.25/0.4/0.6 10% infill Layer height 0.20mm no supports
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
Print resolution at 0.10. Print with PLA. gray for the first 0.7 mm, gary for the next 0.7mm, white, and red for the final 0.7mm. I used Sunlu PLA. These templates are the same dimensions as the official ones. Please check out my other…
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
Basic sewing patterns for barbie dolls (original size). If you want, add for example pleats, fastenings and slits for better fit. You can also add decorative beads, buttons, frill, lace, bow, pocket…I recomend an elastic fabrics. Cut the…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
The part of the etagere must be printed both and screwed together
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
Hellou, # Design Concept The tools and plates are designed specifically for the Traxxas TRX-4 Defender, enhancing its aesthetic while ensuring practical storage aboard the model vehicle. Attention to detail and scale assures the…
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for one variant
Overview Easily replace or upgrade your old or mismatched wall plates with these precise, 3D-printable combination covers , designed to fit standard electrical boxes. This collection includes 2-gang and 3-gang configurations for toggle…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
The main reason why I made these plates was to learn FreeCAD - I wanted to learn and make something useful at the same time! These plates compatible with: * Fast-Operation Vise by…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Background I picked up a Hardinge dividing head and it only came with one dividing head plate. To get other divisions I modeled four of them based on the factory indexing hole count specifications and measurements from my single dividing…
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix that uses the scad file provided but the original designer to make a template for every Frosthaven class. I added the Gcode for a .25 nozzle and noted the color I use for each character in the filename. note some…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
A place to store a large number of earrings. The five plates can be easily removed, swapped, and replaced, allowing you to customize it however you like with a variety of plates. You can organize by color-coding the plates, or by using…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
Now with sliding attachable sides! Now with Extension plates. New Coordinate frame plate I made this modular plate so it is possible to snap plates together with the peg-in-hole snap method. They can be used to quickly make todo list on a…
Print approx. €5.12–€6.26 excl. taxPreliminary estimate for one variant
Volodymyr Zelenskyy Plates - dedicated to an outstanding and heroic individual in these tough times. // Printed with .4 mm nozzle, details will probably better with smaller nozzles though (great print to make use of the revo). // Say no…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
The adapter allows the existing hook and loops, and mounting to be removed intact, should you wish to refit at a later date. The mounting hole has been re-positioned, as per Kadee 832 requirement, and this version requires both gearbox…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
HPLC vial rack with plates the same size as Waters UPLC sampler plate. By moving the ground plate, it is possible to let the vials fall directly into the sampler plate. Printed from PETG, 0.4mm nozzle, 0.2mm layer. The size of the sides…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
***WARNING*** I recently discovered that some of the turn and bank templates do not match the official AMG of FFG standard template. Also to note that you should not use these templates for official organized play. I will endeavor to…
Print approx. €5.79–€7.07 excl. taxPreliminary estimate for PETGSource material: PET
The corner routing template can be used to route a corner of a shelf precisely, there there is an extrusion profile is placed. You can use a router bit with a bearing to trace the shape of the template to the shelf. The drilling guide is…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
This model allows you to mount a Turtlebot3 waffle plate on your WaveShare Jetbot robot. This then allows for the mounting of additional sensors includeing lidar, imus etc. Designed to print without the need for support. Source:…
Print approx. €5.60–€6.84 excl. taxPreliminary estimate for one variant
I've had the phaser for about 30 years, but had lost the plastic door for the battery compartment a long time ago. I just bought my first Prusa (And first ever) printer, and I am teaching myself fusion 360. Here is my first design with…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
WARNING! This is not an easy print, this does NOT just go to printer and be fine. READ THE TEXT. Now with more models!
Print approx. €10.33–€12.63 excl. taxPreliminary estimate for one variant
Tortoise celebrates New Year
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
I fixed the part with small wood screws.
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
EN: Box for 10 different stamp motifs. Material : Stamp handle: PLA, PETG Layers : Stamp handle: 0.3mm, 0.2mm as desired Supports : no Motifs : smiley-2c smiley-2b smiley-2a smiley-1 flat-ist-borin Stamphandle: Stamphandle…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
This is a trapezoid shaped wallplate for North American decorator switches/outlets. It feels fairly mid-century and is a fun addition to a house or room. The rounded edges struggle as overhangs, so I recommend printing it face-up with…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
Les fichiers Freecad sont fournis pour pouvoir modifier les dimensions des tubes.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
This is a backer for the Ultimate Picture Frame (UPF) by Kat Creates. The UPF is a fantastic project that enables you to build picture frames of any size. Learn more here: https://katzcreates.com/ultimate-picture-frame-shop Faye offers…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
These educational plates are designed to help students easily distinguish between hard Y and soft I in spelling exercises. They serve as a simple yet effective learning tool for recognizing the correct usage of each letter, making them…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant
100x160mm sign, advertising ACME Rocket Skates, as seen in cartoons. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
The Infinity Cube is an open cube frame lamp balanced on one corner on a round base. An RGB LED strip runs inside the edges behind a diffuser, so the whole frame glows. An ESP8266 NodeMCU runs it with open-source firmware. Features Full…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
Bust of Socrates: Socrates (c. 470 – 399 BC) was a classical Greek philosopher credited as one of the founders of Western philosophy. He is known primarily through the writings of his students Plato and Xenophon. Key aspects of Socrates'…
Print approx. €19.61–€23.97 excl. taxPreliminary estimate for one variant
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic baseplates using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you…
From the well received GREATEST Towel Hooks now an improved Version 2! With improved attachment area, greater holding strength and fillet corners. Update 13/09/2025: Added versions with screw mounting holes These towel hooks are an…
Inspired by RJ Design's Impossible Vortex and Pyramid, but redesigned from scratch here with my own pitch, lobes and external shapes and models. ALL of these are my own design from OnShape with no measurements or copies or work taken from…
My dimmer knob kept breaking so I made one myself along with the wall plate. Modeled a couple other plates as well and just kept going! The size of these covers are modeled to be midway size. Many to choose from. If there is something…
Replica of the Pirates Of The Caribbean Gold Coin This model imported from Thingiverse. The model is based on javialam and remixed by cyclone . The remix includes two sided versions and a necklace holder. Other models which are very…
Gridfinity is the ultimate organizer for your whole workshop! Zack originally posted all the Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Frame: https://a360.co/38FBsJz Weighted Plate: https://a360.co/3uCJ2gR…
This is a low-profile bed scraper designed for safely removing 3D prints from build plates. The ergonomic handle provides a comfortable grip while allowing precise control during print removal. The scraper features a wide, thin blade that…
By downloading this item, you agree: 1) Not to distribute the files 2) Not to sell prints of this item. You ARE permitted to print this item as a gift. Only Merchants with an active License may print & Sell FatesEnd items. • 🔗MMF:…
Remix of a remix of the Hotwheels curve track piece with adjusted clip sizing. Changes were made to the legs to clean up geometry and artifacts. Sharp edges where smoothed where possible and slot openings where adjusted to fit the latest…
v3 UPDATE NOTES: This will likely be the final iteration of this project. The biggest change with v3 is that I have optimized the files to allow for the use of threaded heat inserts. Everywhere that screws previously threaded into…
Hexagon plates for K1/K1C Unibody Riser Frame . It is a two parts print that should be gluwed together. The plate has clips so you do not need to glue it onto the Unibody Ricer frame. Update 2024-09-28 : I made it easier for you to create…
Re-mix of the same concept from David - but with Clip-on mounting and it prints easier / lower warpage. Clip-on mounting Shroud Easy on / off without removing screws No supports needed Smooth bottom No airflow restriction only 3.6g /…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE February 24th-Added optional side handles that are…
Gridfinity baseplates completely remodelled from scratch, designed to minimise print time. Designed for PLA and other materials with good first layer adhesion. You may need to add a brim to print with ASA/ABS. Sizes 1x2 to 5x5.
When I was looking for templates for printing coin roll paper for private use, I noticed that there were no templates to be found anywhere. So I quickly created some myself. These are print templates for private purposes, so the sizes are…
Gridfinity base plates with adapters to lock to honeycomb wall. Be aware of weight of load of lager baseplates. This project is based on https://gridfinity.xyz/ If you want to support me, please buy me some filament .
Spell Templates to measure distance and Area of Effect for Tabletop Games like Dungeons and Dragons or Pathfinder. The template makes it easy to see which monsters/players get hit by an AoE Spell. No more counting squares or moving minis!…
This is a remix of the gridfinity baseplates by josh.hall - https://bit.ly/JHGridfinityBaseplates who did an awesome job with his version of the baseplates. Versions The modular baseplates come in two versions: Baseplates that can attach…
Edit: I just found out that @jerrymk_985120 made the OG Clickfinity . That's where all the magic happened. Sorry I didn't acknowledge all your hard work earlier, Jerry. I couldn't have done what you did. Recently found NoWarrenty's…
edit: this File now exists on cnc kitchen's site: https://www.printables.com/model/342075-extrusion-test-structure CNC_Kitchen_Extrusion_Test_part_with_Volumetric_Flow_Rates CNC_Kitchen is not me! only wanted the file an it didn't exist…
These are lego compatible brick plates. The models here are only a selection for convenience. All x*y sizes can be configured on the Perfect Printable Bricks website . If these don't fit quite right with your legos you can fix that with…
Valentines Day addition Post Malone fans check out my new Stanley topper and coasters!!! Updated 2/17/2025 I have updated the original name plates 30 & 40 oz to fit better. Also added a few more designs: Flower plate - Just like the name…
Here's a fun design that is super entertaining to play with! This is one of my fidgets in the nested set. Be sure to check out my Three-Legged Nested Fidget and this Little Guy , too! Pro tip: Do not print this with a raft or brim. You…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Simple and easy to print stress ball. I recommend printing this model in 95A TPU or harder. i Printed mine with Amolen glow in the dark 95A TPU. this model is scaleable. If your print has any stringing, use a lighter and slightly melt the…
Hello guys!! I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated…
When stacking several bins on top of each other it can be a bit tedious to access the lower bins. Especially when you place the bins in a box like in my IKEA Samla Gridfinity series (…
If you are here, you know what this is for! Its stable, allows the use of magnets and does not Waste Filemant. I Printed it with 2 walls, 3/4 top/bottom and 25% infill in PLA+ Ps: i mounted the honeycomb wall 90° rotated, so there is also…
Automatically generate Gridfinity templates of any size in FreeCAD , the free and open source parametric modelling software available to anyone at no cost. Check www.freecad.org . The models correctly implement all features included in…
It's an accurate (with fillets and holes) 3D model of the Elegoo Neptune 3 Pro/Plus/Max and 4/4 Pro build plate to be used as a custom background in PrusaSlicer, SuperSlicer or Cura. I've added an embossed Elegoo-logo for a slightly…
This 3D printable model is a stylized pirate ship, designed for use in ‘Lying Pirates’, scaled perfectly for the game board. Whether painted or left in its natural finish, this model brings a captivating, tangible element to the 'Lying…
These Superlight Baseplates , whilst printing fast and clean, lack weight and slide around easily outside of drawers such as on desks and shelves. I've taken the aesthetic of the base from the Mini HSW x Gridfinity Organiser and made…
With Mother's Day coming up, what better way to celebrate that special lady in your life by presenting her with an acknowledgement of all she's done to turn you into the 3D printing individual you are today, in the form of the World's…
I have designed these PS5 skates for a buddy of mine. He was super happy about them so I am assuming they fit well enough
Le adapte vanas ruedas a los pies del DUMMY 13 unas ruedas
Official Reference CAD Envelopes for Logitech Keyboards Provided as part of Logitech’s Adaptive & Accessibility Initiative , this package contains simplified 3D reference models (dummy CAD envelopes) for three of our flagship keyboards:…
(Buy me a coffee if they are useful to you thanks :-) Tip Me Here 7 Pcs Set Radius Jig Router Templates, Router Templates for Woodworking "Only 6 in the photo but you will get 7 files" Corner radius jigs allow for easy and repeatable…
JERRARI3D.com The Essential Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies HERE, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with an…
Mini boxes in 4 different sizes. Use for decor or organization. They are easily scalable for bigger dimensions
Warhammer 40,000 11th Edition Terrain Area Footprints This collection contains printable terrain area footprints specifically designed for use with Warhammer 40,000 11th Edition. The set follows the official terrain footprint sizes used…
After a bit of hunting I decided to make my own build plate caddy. This one provides support at the top & the bottom so that if bumped or knocked over the edges of the build plates don't risk getting bent. You will need 8 M3x20 screws to…
These are a few fundamental Sashiko templates that I use for visible mending. Use a water washable marker (eg Crayola water washable marker) or heat erased pen (eg Pilot Frixion) to mark the lines onto your fabric or garment. I have also…
I cut the 7x10 grid baseplate that fits the IKEA Skinny Alex (9 drawer) into parts for smaller printers (like my Ender 3s). You will need to print 2 of each file for one complete drawer. All parts are interlocking and reversible.
🎃 Happy Halloween!!! 🎃 From talented designer Joel Ristol aka @1.6_3dart , here's a classic horror film location: the Psycho House to decorate during this holiday spookseason! This creepy house overlooks the Bates motel where the events…
These bridges give some new possibilities and can help save some spacers. Al files can be printed without any supports
Use Supports, Original Size of STL 30 Cm above. You can scale it if needed.
Designed a quick template for a temperature tower to see what the best temperature is for printing. I provided a blank one that you can edit yourself and PLA, PLA+, and a PETG as well. Print instructions Category: 3D Printing Tests
Let me help alleviate your stress. Did you know that stress is the leading cause of “early onset old-person death”?! It's true! You and I can remedy the situation with this easy-to-make print! I love this simple print; I've used 0% infill…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Guard plates for C1, C2, D1 and D2 printed face down and when completed installed a 5x2 mm magnet. I printed in PETG but original files are for PLA. Either will work. Gurad Plates B1 Front and B2 Front were split in 2 pieces so the main…
Designed to hold 4x 27cm and 4x 20cm Ikea Plates (I use FÄRGKLAR). No more noise in the camper!
This figurine set captures the many moods of the Kingdom Come: Deliverance II world through an unlikely observer: the humble bunny. Each model represents a familiar in-game state, instantly recognizable to anyone who has ever been…
Under body protection for the Omni Terminator from Rlaarlo. You can re-use the stock bolts. You have 2 options. The full ski protection or the just the sides plates (L and R). Recommended ABS/ASA, but works just fine in PLA. If you use…
JERRARI3D.com The GEN2 Classic Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies and slide your personalized faceplate in place. Lock in place with an optional M3 screw and nut. The GEN2…
Easy to print hitch covers. A blank template is included so you can add your own designs. A simple latch is included to keep everything in place. Other Hitch covers Printing PETG or better No Supports Orient with face up Suggest using…
2 sizes of crates that I created to be used as freight on a model train wagon note the little hole in the bottom is intentional, it allows you to put a toothpick in there and handle it more easely when painting. Designed for Prusa MK3s+…
Gridfinity baseplates with slightly smaller (6.5mm -→ 6.09mm) magnet holes. I use this jig and a hammer to add the magnets. No need to wait for glue, and you can poke the magnets out from the other side to recover the magnets when done!
I wanted to create a model of each US state so that I could use them in future projects when needed. Additionally, I created an outline of the United States while working on this task. Here's a video I made about this mini project…
Flashforge AD5X Spool Number Plates, shaped to the spool spindle ends. Useful to show spool number which is hidden if the spool is installed Just clips in to existing spindle hex hole at the end. Remove number support after printing with…
Side-mounted build plate holder for 6 build plates. Designed with holes for 10x2mm magnets, but can also be attached to the printer using double-sided tape. Slot sizes for build plates: 1. 1.00mm 2. 1.00mm 3. 1.00mm 4. 1.20mm 5. 1.50mm 6.…
