51 models
These files are intended for a system to make it easier to swap faces on the Bachmann Thomas. I'm using the Anniversary LBSC 70 Thomas seen in the 2015 movie The Adventure Begins, but a regular Bachmann Thomas should work just fine given…
I created this to fix the locomotive I owned. I used Siraya Tech Blu resin, 50 micron layer height, the gear printed vertically with light supports at each gear tooth tip and heavier supports on the bottom. Not sure about long term…
This configurable coupling generator (couplings_parametric.scad) is capable of producing an X8031 (Hornby/Bachmann), X9660 (Dapol/Hornby/Airfix) and Hornby dovetail (hornby's NEM socket socket), with and without hooks. Usually the real…
Nem tension lock coupler for oo gauge model trains Hornby bachmann
Should match the stock coupler housing, with spring and coupler. Haven't tested load strength or anything though N scale Print Settings Printer Brand: Anycubic Printer: Photon Supports: Yes Filament: Siriya Tech Blu V2 Clear Category: Hobby
First, I made the two top pieces: “Top Half A & Top Half B with 3-”Center Dowels" then glued them all together. I used “Glazing & Spot Putty” I bought from any auto parts store and hand spread it over the top but be careful not to get any…
Interior parts to make a chapel car out of a Bachman G-Scale coach Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: SunLu PLA Category: Vehicles
Update 7/14/25 - Changed the front end model to make it less dainty, changed to a underset shank coupler for easier printing, working on cylinders for next update. This is a work in progress and offered here for feedback and remixing.…
I would suggest using a somewhat higher infill and print right side up in one piece. Using PrusaSlicer, supports are fairly easy to remove.
the early Bachmann Thomas & Friends range is well-known for being clunky and often a hassle to maintain. while this has improved over the years with newer models improving maintenance, the older models need reworking. this is an upgrade…
We all know the interior Bachmann has in their business car is just horrid. Here is my take on a PRR style interior to replace that. It's based on car 180, that seems to be the closest match to the window pattern Bachmann copied from the…
I intend to at some point reverse engineer the entire cars to upload onto these websites so all of you can create your own and make them more accessible, as we currently only have a baggage car, combine car, and coach car that is reused…
Modifications for a Bachmann Spectrum 2-6-0 mogul. Headlight bases uses the existing top part of the headlight. Coal load for tender replaces the metal coal load. Original smokebox front fits on the extension. Holes are pre-made for Ozark…
Like the original replacement part thats not available anymore. Check the drawing for dimensions
Being in the United States, getting replacement parts for British model locomotives can be challenging, un-environmental, or impossible. but I found that the Bachmann Percy chassis shares a similar wheelbase to the 0-4-0's, and the…
Buffer/Bumper for Bachmann EZ Track. Has built in supports which you need to clip away (see difference between first and second buffer in picture)
the roof on the models is attached to the windows and slides out with some convincing. These are designed to sit on top of the weight molding and can slide right in. For the interior, I used luggage from…
This ultimately became a freelance design based on American rail speeders/motorcars. I designed this to resemble the one once used within Union Pacific. the most significant change I made was the sloped front. feel free to use it however…
About I had two Bachmann CONI powerstrips lying around whose mounts were broken. I also didn't wanted to mount them flush inside the desk, so I designed these mounts which replace the original sidecaps. The L-Clamp takes an M4 Nut and…
Drop-in interiors for the Bachmann HO Henrietta. The model comes apart with two screws on the underside and clips on the body and handrails. You will need to snip off the two plastic arms that the screws attach to (the model will still be…
Replacement Drive gears for Bachmann ON30 Side Rod Gas Mechanical 0-4-0 Locomotive. Printing: Printed Using 0.2MM nozzle for fine detail I printed these in PETG with 4 walls, 100% infill, and Arachne wall generator
My son got some new Bachmann G Scale train cars for Xmas. His train set had knuckle couplers and the ones he got wouldn't work. Ordered replacements but they were too high and didn't fit. Designed this print to lower the couplers and fit…
I found using the controllers free hand was fine for 1 or 2 but needed a place to hold them when it got to 5! Print instructions These were made in Tinkercad and designed to print with an Elegoo Mars UV resin-bath printer. but i have not…
This part replaces the swinging close coupling yoke with a Kadee style coupler pocket and adds some end details. Conversion is reversable should the modeler wish to use the original style coupler yoke. Should be useful when operating…
I had to mount the power strip to a panel and made this on the fly. Not my prettiest work but it gets the job done. If you print in PETG with 100% infill, it is surprisingly sturdy.
Load inserts for the 7 plank trucks in the Bachmann Thomas range: the troublesome trucks, the colored open wagons, S.C.Ruffey, etc. Blank one to make your own (full depth) Blank one to make your own (half depth) Blasting caps (based on…
Drop-in interiors for the Bachmann Thomas and Friends Red Coach and Red Brake Coach (and Toby's Museum coaches). The models used in the TV series were either 1st/2nd class coaches or 3rd class coaches. The season 1 brake coaches were 2…
Emily's coaches are based on GWR Clerestory coaches, but the Bachmann models are retooled versions of Annie and Clarabel. These interiors are drop-in and will fit between the window moldings. The windows are attached to the roof and come…
Replacement Center driver axle hub for Large scale Bachmann 4-6-0 "Annie" steam engine. These plastic hubs are prone to splitting on these engines, this is a replacement for a split axle hub Print Settings Printer Brand: Creality Printer:…
Generic Ho scale interior for Bachmann brand "ATSF 999628" caboose. May fit other cabooses but designed for that particular model and fits perfectly. I did not include stove so you can add either coal stove or gas stove as desired (stove…
N scale support for Bachmann E-Z track system, with various size legs to enable the builder to construct any size and shape track system. The track grip should be installed at the junction of two track pieces to provide support and…
Replacement Drive wheel center cap for a Bachmann Spectrum Mogul Category: Vehicles
Mounting plate for Kadee coupler body mount on Bachmann large scale boxcar Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: SunLu PLA Grey Category: Mechanical Toys
I hate not having tightlock couplers on passenger equipment. Not just for looks, but a Kadee 118/119/120 coupler really works keeping passenger cars coupled together on crappy module trackwork. So these models are drop-in replacements of…
This is a horizontal mount for a Bachmann STEP power strip. The clamshell distance that's aligned with the openGrid has been optimized for a single 5 outlet power strip. I'm not sure how this will align with e.g. 2× STEP 5s with regard to…
An oil bunker that fits on to the top of the 1st generation (and maybe other) 1:20.3 Bachmann Climax. It is hollow to add more internal space to allow batteries, RC and sound to fit completely in the tender. Print Settings Printer Brand:…
For Bachmann Smart 388272 3-port power strips (maybe also fits for other variants). Two are need for one power strip.
Hibiscus and Lavender are two estate locos made for the Bachmann Rheneas chassis.
Drop-in interiors for the Bachmann HO Henrietta. The model comes apart with two screws on the underside and clips on the body and handrails. You will need to snip off the two plastic arms that the screws attach to (the model will still be…
mounting block for a Kadee coupler to body mount on a Bachman flat car. it press fits nice and tight. Works with a medium offset Kadee. This is for the older style Bachmann cars with the solid underframe Print Settings Printer Brand:…
Bachmann NEM Snow Plough Removal Tool For use with Class 37/47 and others for removing the NEM pocket Snow Ploughs Insert in between rear of snow plough and NEM pocket and twist to pop the snow plough out.
Sand tanks to fit the rear of the tender on a Large Scale Bachmann Climax. Tabbed version fits the later version, untabbed fits the older version. Base glues on the bottom of the tank and a pied of brass rod is used for the feed pipe…
This is only for Thomas, for other locomotives scale to the faces
If you want to screw on the socket strip and do not have the appropriate washers for the wood screws at hand. Hole diameter is 5mm edit 16.03.2026 To create some clearance behind the power strip some parts added. - Upper/lower bracket. -…
Ein Remix eines Steckdosenhalters für eine Bachmann Steckdose.
This is a basic interior for a Bachmann off-center cupola Caboose, it really isn't PROTOTYPICAL, just something I threw together for fun. The extra parts just in case some of the ladders and stuff didn't print right on FDM. Will fit…
Custom Modules in BACHMANN POWER FRAME BACHMANN Custom Modules provide flexible integration of power, data, audio and video connections within POWER FRAME units. Their interchangeable design allows connections to be easily configured and…
When models are made, compromises are necessary, often so that the model can go around the tight curves of model railways. Bachmann chose to keep the wheel base to prototypical length, and so keep the pony truck at the correct distance…
The Bachmann 3F has a gap under the boiler where the in-between frame detail should go. This part will give a representation of the inside motion. Simply print out, paint and stick in place. It is a little tall, but you'd have to remove…
This is a wall mount for the BachMann 19" Alu 1U Powerstrip/PDU. (art: 333.001). Originally it is a 1U 19" Rack mountable power strip. But I need to mount this to my wall instead and the old 19"-bracket holders are long gone. Printed with…
This is only for Thomas, for other locomotives scale to the faces
