323 models
Ich habe für mein Abarth 595 eine Verlängerrung Erstellt, damit Flaschen/Dosen besser halten. Die Verlängerung passt perf Passt für die Fiat 500/Abarth ab bj. 2009-2017 (bis Gen.3) Erstellt habe ich es mit Solid Edge 2024 und stelle hier…
Print approx. €6.41–€7.83 excl. taxPreliminary estimate for one variant
Bartmannkrug : Beard Man Mug Bartmann jugs were very popular, not only in Germany, but also abroad in the 16th and 17th centuries. They even reached the New World.
Print approx. €17.76–€21.70 excl. taxPreliminary estimate for one variant
A modified and simplified version of Cathedral SV. Bartoloměje (Pilsen). Sliced for all Prusa filament printers.
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
The Simpsons, Bart, Homer, Lisa - wall art, easy to print
You can keep this stuck in place with a small dab of Sticky Tack
Meet Bart in his natural element — mid-graffiti mischief! This playful and dynamic figure captures the spirit of everyone’s favorite troublemaker from The Simpsons . With his signature slingshot backpack and spray can in hand, Bart is…
I've remixed this nice model to convert it into a nice planter inspired in the chids tale “Manuelita” (He's Bartolito) It was printed on a Artillery Hornet. with prusa slicer 2.5. (using prusa profile Hornet 0.16) Flament : PLA 3n3.…
Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…
Support needed, infill 15%, no brim, no rafts.
Compatibility Ph3 horizontal or Ph4 vertical oem fiat 500/595 vents. Print Print one with vertical symetry to get the 2nd side. Use ASA or ABS for hot days… For phase 4 only, you will need to apply a scale multiplayer because the oem…
These letters can be printed in a multitude of colors from the iconic green-white-red to a more simplistic all white. Switching colors during printing is required to obtain color difference. Letter mounts are placed on the back of the…
Standing Bart Simpsons model. Prepared for handpainting 0,16 layer, 5% gyroid infill, 2 walls, organics/tree supports
The version with the hole for the magnets can hold four 5x1 round magnet stacked on each other, but i included the .f3d file if you want to modify it to fit other sizes. Be careful if you want to size it down because i don't think the…
This desk or bookshelf art can be held in place with a small dab of Sticky Tack.
This model of Bart is 7mm deep and has built in hook mounts. I printed mine with the front in black and the rest in glow-in-the-dark. I also added support for the hook mounts, these are fairly small and easy enough to remove but you can…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Esta es una fiel recreación en 3D del icónico rebelde de Springfield, Bart Simpson .
Bart Simpson on skateboard Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Bart Simpson's Punisher Skull Keychain EN: I used ABS filament for printing (You can use any filament). For best printing results, use the 0.2 mm nozzle and enable ironing in the slicer. The color change is done with the M600 command. CZ:…
Bart Simpsom Mooning. Printet om Prusa MK3s-MMU2s Number of tool changes = 60 Great way to test MMU2s Print instructions Category: 3D Printing Tests Summary Bart Simpsom Mooning. Printet om Prusa MK3s-MMU2s Number of tool changes = 60…
Note: I forgot to update but the thing need an hole/cable pass-through on the top of the tray or the top won't close. Here's all the 3D printed part I used to do this mod. There's are some part I used like the PCB for splitting the +5v…
Bart Simpson Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
The emblem from my car fell, so I printed another one. You can swap filament at the required layer.
This model is compatible with the lego system.
You can insert the usual gift cards or other cards in check format into the side of the presenter. Insert the presenter obliquely into the stand. Material change has been stored in the g-code
I recommend printing with organic supports with a minimum fill of 25%
BART - SPRAY CAN - SIMPSONS - WALL ART
If you want to get this template without subscribing, write me in chat! - SideSilhouette
Easy to print, its already hollowed, have fun ;) the grey one on the pictures have a print error, its not the model, it was the first print i tried and i had some issue with my printer.
Hello, Welcome to my profile, full of models and miniatures :-) I have Bart Simpson for you. Very cool characters. It is suitable for coloring. My kids absolutely love it :-). Important: If the character does not stand and somehow…
Just a simple Cookie Cutter of the character Grantelbart from The Secret World of Santa Claus / Weihnachtsmann und Co KG. If you want to support me creating new models, please consider buying me a coffee .
Bart Simpson Lesezeichen / Bookmark
Re-uploaded with a simpler filename for anyone looking for an Abarth logo to print.
It's highly versatile; you can use it as wall décor, table décor for the kids' room , or anywhere else. Use it for anything your mind can imagine. Hope you enjoy Hey everyone, first of all, it would mean a lot to me if you could download…
A mini of Bart Simpson for painting. The included of photo is the model painted with acrylic markers.
Looks cool if you ad some colorchanges to it. Got this idea while watching a YT video about drawing the simpsons. Thougt it might look funny on some gear
Note: The files don't have the "Moshi's Arcade" text at the top of the machine. It's your machine if you print it, after all :) BOM (Bill of Materials) LCD: Waveshare 7 inch LCD. Option 1 , Option 2 4x Sanwa OBSF-24 buttons (push-in type,…
A new 3D figurine generated by AI, a Chibi Urban Bart Simpson. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
This repository contains everything to rebuild the simplyRetro D8 . The D8 is my first attempt to build a small custom bartop from scratch. Warning This is a quite an easy build to print and assemble, but some of the screws are very hard…
Abarth - Keychain - Portachiavi - Porte Clès - 钥匙链 From Wikipedia, the free encyclopedia: Abarth & C. S.p.A. (Italian: [ˈaːbart] ) is an Italian racing- and road-car maker and performance division founded by Italo-Austrian Carlo Abarth in…
BART - GRINGING - SKATE - SIMPSONS - WALL ART
My friend gave me a broken abarth back seat release handle. I have 3d scanned it but do not have skill to design it. maybe somebody will have. there are revoscan project files in zip archives.
This is a magnetic smartphone holder designed remixing this thingiverse simple base plug for the Fiat 124 spider / Mazda Mx-5 cupholder slot https://www.thingiverse.com/thing:2108802 . It is intended to be printed in a heat-resistant…
I saw no one made these and they are simple to design so i made it so who wants to make kurt cobain style martin d18E
UPDATE: Newly posted as of Oct 12, 2024: FluidDial CRADLE v2.0 - for LowRider v4 (attaches to YZ plate on X-min side) - https://www.printables.com/model/1037601-fluiddial-cradle-v20-for-lowrider-v4-attaches-to-y …now back to your…
This is a remix of PiCade-HAT Based 10" HD Mini Bartop by Zurkeyon https://www.thingiverse.com/thing:2099016 which is a remix of malopezn's Arcade Cabinet http://www.thingiverse.com/thing:768663 . The aim was to simplify the build and use…
I made a 3D scan from a statue of the “world” famous Bartje from the Drenthe region in The Netherlands. More info about this character to be found on: https://en.wikipedia.org/wiki/Bartje
Enthält bisher Nr. 7 & 8. Schlüssel wurde erstellt da der alte abhanden ging und eine Tür noch heute geöffnet werden musste. Gedruckt mit PLA Meta mit Tree supports. Der Schlüssel hat gehalten und wirkte stabil genug um ihn zu benutzten.…
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- Made this stand to organize my bartender kit. It's too big…
Eine Rasierhilfe/schablone mit Kamm um Bart Konturen schöner hinzubekommen.
This model is remix of two models from thingiverse, abarth wheel cover 43mm and abarth scorpione. I remix it to made it more detailed and filled logo of scorpion on the top of car wheel cover. First version ( abarth_cover_lower ) has…
Some cover to hide the chrome. Pair them with plastic dip paint to get a nice black matt finish.
Remix con distintas actualizaciones y modificaciones del diseño original de Gustavo Mendelez. Link original: https://www
Bart Simpson with a slingshot Sticky Tack will help keep this stuck to your desk or shelf
Mini 13 Bart Simpson 4 Files included, yellow frame, red armor parts, blue armor parts, and his head to print in yellow (use supports for this part). Use the basic printing and assembly instructions from soozafone's Mini 13… I liked him…
Bart Simpson Funko Pop – The Mischievous Icon in Collectible Form! Add a bit of Springfield's troublemaker to your collection with the Bart Simpson Funko Pop ! This figure perfectly captures Bart's rebellious spirit with his classic…
Die Füße minimieren Geräusche und Vibrationen des Druckers. ich habe sie aus TPU gedruckt. The feet minimize noise and vibration from the printer. i printed them from TPU.
LISA HUGGING BART - SIMPSONS - WALL ART
Need to be printed with vertical symmetry to get the 2nd side. Better use ASA or ABS.
simple 2D design i'ts a tight fit , im also adding bart without the ad for the stand
It is common for the tabs on the back of the 130mm centre cabs to break during removal. This glue-in insert can repair a broken tab and extend the life of the cap. Ideally print in ABS and use a solvent cement to glue the required amount…
Print & acrylic draw!
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
simple but yet effect Abarth logo
A mischievous keycap inspired by Bart Simpson from The Simpsons. With his trademark grin and spiky hair, this design perfectly captures his rebellious and fun-loving personality. Great for fans of classic cartoons and collectors who…
A new version of my previous boost gauge. This one is more deep and provide a little cap to avoid sun reflection.
Here is a Dwarven or Human Bartender variant of my recent "Stupid Fat Hobbit". I had a Beer Stein in my backlog so I slapped it into his hands. I sculpted the fine details on the original model and had to adjust the beer stein. It was…
Bart Simpson Punisher Wall Decor
Per gli amanti dello scorpione italiano e della 500 Abarth,personalizza e stampa la tua 500 da mettere in una parete, Sostieni i miei piccoli progetti
Die Original Version war mir doch etwas zu langweilig. Daher hab ich mir meine eigene Kreation erstellt. Wieder mit eigenen Felgen und getrennten Reifen. Die Reifen müssen in TPU gedruckt werden. Da Sie sonst nicht über die Felgen passen.…
Found the Abarth shift knob cover from Weverett1997. Had some time so I added the scorpion logo. Print the cover as is and fill the scorpion emboss with paint or print the scorpion logo separately in a different color and glue in place.…
Model made in Fusion 360 by myself… copied from an image found online of the wheel, then just made my own similar version of it,,, it isn't exact, but a nice representation of that type of wheel design from a special edition Fiat 500…
RASTA-BART-STONER - WALL ART
The free version doesn’t have arm articulation, the head comes fixed, and it’s not painted for multicolor. You can get all those features on Patreon or by grabbing the paid version. We’re all-in on making every one of the 9000+ Simpsons…
Hi! This is an Arduino Game System in Bartop Format . It's compatible with Arduboy ( http://www.arduboy.com ) and uses a modification of the recently uploaded Mini Arcade controller ( http://www.thingiverse.com/thing:2293054 ) Components:…
He's a real wonder behind the bar, able to serve up your whole party at once! This is a 28mm fantasy miniature, scaled to fit on a Medium (1 inch / 25.4mm) base, suitable for tabletop roleplaying games such as D&D, Pathfinder, etcetera.…
Logos for Miller Electric, Lincoln Electric, Hobart Welders and Forney Industries. Let me know if you're looking for a particular logo and I'll do my best to track it down for you.
Beautiful and very easy to print. A unique Abarth key ring
Color Change: 0.0 - 2.0 white pla 2.2 - 2.6 black pla If you rescale, turn off uniform scaling and put z value back to 100%, otherwise the color settings will change. COMMERCIAL LICENSE ACCESS is available through a patreon membership…
Simple Leg Bartop 25mm with leveling we can use it with other application but for me i use it for my bartop Happy Printing Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament:…
This is a printable Abarth 500 DRL delete. Use 100% infill and print out of PETG, ASA, ABS I used a mix of hot glue, super glue and black high temp silicone to secure the insert. I did shave away some plastic on the inside so it will sit…
Maverick - Bret Maverick (James Garner) and Bart Maverick (Jack Kelly) - 1957 3D printable model.
Je l'ai imprimé face contre le PEI texturé afin d'avoir ce rendu sur le logo. Le modèle peut être réduit jusqu'à 70% de sa taille originale en activant la détection des parois fines (modèle test que j'ai imprimé). J'ai mis a disposition…
HueForge Bart Simpson Nirvana Cover Picture (2 color version) You can resize the model, keep X und Y in the same relation, BUT KEEP Z AS IT IS! Model is 150x112mm in size Model is 200x150mm in size Same instruction for both models: Print…
Bart Simpson causing on a skateboard
Bartkamm Perfekt für den Geldbeutel mit 0,4 Nozzel drucken.
My Fiat 500 tailgate handle remade in ABARTH version. The scorpion is press fitt to the handle, no glue needed. I used a hammer to gently knock the scorpion into position. Print w-out support, at least 5 wall loops and 30 infill.
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
