Counting matching models…
Lots of fun with a bubble straw that produces a ton of bubbles for the kids. Use: Make sure the tip of the straw is submerged in the bubble solution for best performance. See the photo with the red line. I've included the .3MF that uses…
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
If you wish to be a distinguished gentleman, this is the bubble pipe for you! Created at my brother's request. My goal was to try and make a bubble pipe that could produce larger bubbles, instead of the standard heap of tiny bubbles that…
Modern 80's themed pot and planter for your house and garden plants (mostly inspired by bubble gum) Print settings: Vase mode (best to print in 2 or 3 layer vase mode [regular vase mode just with more outter layers]) Used materials:…
Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :) pug original model: https://www.printables.com/model/266115-pack-pug
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
HAPPY BIRTHDAY glasses with funny bobbling letters. Fits on Prusa MINI (see the last picture). If you want “MERRY CHRISTMAS” glasses you can find it here https://www.printables.com/model/669553-bobble-merry-christmas-glasses. Short…
Remixed using Bearded Skull by Rogi Studios and Bobble Head Sping and Base by 3DPrinty Updated skull model You can use any base and spring made by 3dPrinty, you can look at some of them here:…
Bobble the head of your favorite leader of the heroic Autobots! I wasn't able to find the source for the head model I used for this bobblehead. I found similar ones, but not this exact one. If you find it, please let me know. All I did…
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
tlač 1:1 pre male postavičky tlať 1:1,2 pre vačšie postavicky. vznikne vnutorný priestor 4,5cm dlhy vid fotka šroby: 3x10 4ks 3x25 1ks infil 20 perimeter 2
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Bubble letters Set up the 3mf so the letters are individual .obj so you can use the ones you need and easily duplicate.
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Bobble the head of your favorite treacherous Air Commander of the evil Decepticons! Get the rest of the needed parts (spring and base) from the linked original Bobblehead models, or use my 3MF file, or print the provided gcode appropriate…
What I have learned thus far from using AI to design. Basic Observation: Organic Models work way better than hard surface geometric models. If you want straight lines – FORGET IT. but --Curvy amorphous, organic… YOU are good to go. Skulls…
Bobble the head of your favorite Decepticon Military Operations Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with…
Downloaded from https://www.thingiverse.com/thing:2456869 (author Willem Knapen - https://www.thingiverse.com/wknapen/designs) and remixed for using on the Prusa MINI+ printer. Bylo downloadováno z…
There is no particular recomendation for the print. If you want you can add superglue to reinforce the piece.
Bobble the head of your favorite Decepticon Communications officer! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of…
My "Zero Ducks Given"-Patch, now as bobblehead for display on your desk, car or wherever you want it. Printed in PETG; 0,2mm layer hight. If you want your print-bed surface for displaying the letters, just mirror the “Bobblehead”-file…
Bowling Pin Bobblehead Assembly Use the “stiff spring” from: https://www.printables.com/model/224836-emoji-printer-bobbleheads I suggest using some super glue on the spring ends. Printing Instructions Infill: Lightning at 20% Do not use…
Bobble the head of your favorite tyrannical leader of the evil Decepticons! I got the Megatron head model from this set of parts on Thingiverse: https://www.thingiverse.com/thing:2373072/files All I did was scale it appropriately, and use…
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Bobble the head of your favorite friendly little Autobot pal! This model includes a remix, with permission, of the head from the Toymakr3d G1 Transformers Bumblebee. If you like Bumblebee, that print is a lot of fun to print and build, so…
Stores a Logitech Pebble M350 on a Skadis system
This is a set for children to make large and small soap bubbles. Of course, it goes without saying that soap and water has to be provided seperately. :) Printing: From my experience support for the ring itself is not needed, but support…
Bobble the head of your favorite Autobot Leader! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of my son's model for a…
Printed with 0.4mm nozzle and layer thickness 0.2mm. No supports. It is the first published model that I have given some extra color by painting. The woodpecker and the spring are own designs, the tree trunk is a remix from Vegetation B -…
Thanks to Vlado Turek and 3DPrinty for their models for this remix! Get your chosen base and spring from the 3DPrinty Bobblehead files, or use my 3mf.
Fallout4 stand for all 20 bobbleheads. Designed especially for the Prusa MINI+ 3D printer (or for another such small printer). “Podstavec - standardni” … can be used for any version of the figures “Podstavec - alternativni” … is intended…
Bobble the head of your favorite City Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
Bobble the head of your favorite Autobot Special Operations Agent! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of…
Meet Lani, your charming hula girl bobblehead, perfect for adding a touch of Hawaiian spirit to your space. This minimalist design features shoulder-length hair and a straight skirt, capturing the essence of island elegance in a sleek and…
This is a small profile, economical, strong, easy to print and assemble spool holder for the MK3S & MK3S+ with 608 bearings for smooth rolling. Each side has a retainer to prevent spools from jostling around, which also lends strength to…
Hotfix for Z axis wobble (Anet A8 Plus) With the factory parts, the Z rods of the Anet A8 Plus are wobbling terribly. There are two parts per side in the game. On the bottom is the motor mount which includes the 8mm diameter hole for the…
Copied the 3D Printy's base and spring. Made a simple two-finger welcome for placement on the car's dash, refrigerator door, etc. The 6 x 3 mm magnets are inserted into the base to secure the assembly to a metal surface. Let me know if…
🛠 Materials & Hardware: 🧵 Silk PLA Filament (Pink) ➡ [ https://amzn.to/42ui233 ] 🔑 Keyring Split Rings (25mm) ➡ [ https://amzn.to/41RZ3zh ] "LOVE YOU" BUBBLE KEYCHAIN Spread affection and carry a little love with you everywhere! This…
I printed it with a layer height of 0.2mm with 10% infill. It could be done without infill, but it has not been tried yet. Enjoy it
Simple hexagonal box for your circular cards. OpenSCAD model included so you can adjust dimensions to your needs. Recommended print settings Resolution: 0.15 With higher layers the thread will get a bit rough. With lower it will be…
Genghis Khan Funk@ P@p Bobblehead. zero post op. NICE.
Rick Sanchez bobblehead designed in Blender. printed with Prusament Galaxy silver on Prusa Mini+. Layer height 0,3mm and nozzle 0,6mm. I am sure that the result with 0,25/0,4mm would be much better! check print file of head to see…
This is a remix of the Mr. Sparkle Wall Art created by ImaginaryTragedy. The files containing Mr. Sparkle's head/face are exactly the same. What I did is create a 3D image of the text bubble that is on the Mr. Sparkle box. I am brand new…
Want to print a text? Throw some text on the bubble!
Overview Pokémon fans unite with this playful Oddish bobble! Enjoy watching Oddish bounce to and fro with the addition of 3D Printy 's bobble-head springs. Printing I printed using PLA on the Prusa i3 MK3 with variable layer height to…
Salut , Voici une impression pour créer une bouteille à bulle de savon à partir d'une simple bouteille (Compatible avec les filetages "pco1810"). 2 pièces à imprimer et à coller ensemble J'ai créé une pièce "Validation_Filetage.stl" qui…
Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…
Bobble the head of your favorite Decepticon agent of Espionage! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the…
Bobble the head of your favorite Decepticon Psychological Warfare specialist! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with…
Made in blender, this wobbly vase looks pretty cool. This was printed in vase mode using the default 0.4mm nozzle, match the settings in the pics or use the g-code file to get started. (vase mode with 0.8mm as extrusion widths, I tried…
I designed this to be a quick (<30 min) and easy Z wobble test to print on any printer where Z wobble is suspected.
This bobblehead moves as shown below. Enjoy the thrill of not seeming to fall. 以下のような動きをするボブルヘッドです。落下しそうでしないスリルをお楽しみください。 Parts to be used 使う部品 Base: Use a standard one that matches the size of the magnet. Since the magnets I had on hand…
Thanks to 3DPrinty and Sango for the great models to mash up!
I had a dream I was a spy and I used this to save the world. There were mutants and alien machines and this lady with 3
End cap for PowerXT 24" level (YT24A00). One cap was missing on mine & the exposed metal was a bit sharp. This printed PLA part press fits tighter than the original. Print with the exposed end facing up. Full supports underneath since…
This is a 15x15x40mm bubble level holder for Vixen-styled dovetail bars. And the hole pattern fits dovetail bars made by MoreBlue. p.s. A slim version V2 is added.
Replacement part for the Fru Blu bubble gun (I'm sure it's sold under other brands too) for connecting the bottle with the bubble fluid. The original bottle connector is thin and can be damaged if dropped.
Do you love 3D Printy's bobbleheads or one of the many models that use his baseplates and springs ? Do you lament your inability to mount one of these fantastic bobbleheads to your camera? Well this is the print for you! OpenSCAD OpenSCAD…
I print from the STLs for either the dino bubbler (2pcs) or the costco bubbler (1pc) and then use Zip ties to secure. Dinosaur Bubbler Fusion Files https://a360.co/3Jgikki Costco Bubbler Fusion Files https://a360.co/3H77pZJ Snow Princess…
Creative Pebble Pro mounts designed to fit onto an RSeat P1 simrig. Use 3M foam tape to mount the speakers to the brackets. You will need 6 M3x10 socket head cap screws. They will cut threads into the plastic and are plenty strong enough…
🫧 Baby Bubble Blowing Box 🫧 Tiny box, many bubbles, endless joy! Do you also have a forgotten 5V axial fan in your workshop? Turn it into a whimsical bubble-blowing machine with this compact and clever print! The Baby Bubble Blowing Box…
Funk@ P@p Jesus made with LumaAI. UV displacment in Blender Fixed and prepared in MS3dbuilder. Sliced in Prusaslicer.
Use this test tower to test for Z banding/wobble. This print aims to be simple, as quick to print as possible and and use minimal filament. Recommended print settings: 0% infill 0 top layers Z seam at rear If this model is too tall…
As Ender 3 v3 SE/KE has a rather unstable structure, the additional weight placed on top makes it even worst. I designed a handle to transfer the filament to the bottom of the printer. As a result, the prints are noticeably higher…
pebble from the hit game on roblox dandys world!1!111! (btw if you actually print this leave a review) also idk how to fix the position of the model so uhh yeah. you do that
Using a flexure spring and an over-center mechanism to create the classic toggle switch in an interesting way. Shouldn't need any lubrication, but like all mechanical prints, it can benefit from a little oil, wax, or soap in the joints,…
The Hubble space telescope , the largest single big metal tube currently in Earth orbit, has been gazing into the cosmos since 1990, taking some of the most influential photographs of our time. The first in a new series of model kit cards…
You can scale this down and cut the height down to what you need. I print these at a .5mm to .6mm external parameter and they look great with thick layer lines. Inspiration from UAU project.
Customizable 3D printable springs for bobbleheads and similar designs. https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ How do I customize this? This is an OpenSCAD project. OpenSCAD is a script-based modeling software…
Jack-o'-lantern bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/5cWb99a7tlI https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ Printing Pumpkin heads may require supports (around the exterior…
Emoji themed bobbleheads for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/3HwXJQMGgsQ https://youtu.be/y7rcWTLWsCM https://youtu.be/5cWb99a7tlI Printing Base and spring can be printed without supports. Emoji heads…
Simple test for testing your Z axis
Say hello to Nibbles , the cutest little bunny just in time for Easter! This adorable 3D print is designed to be quick and hassle-free, completing in just 30 minutes. With its big, expressive eyes, chubby cheeks, and charming little…
When I bought my 3D printer, I knew I wanted to print a Vault Boy bobblehead, but I couldn't find a model that looked exactly the way I wanted with the classic Vault Boy thumbs up pose. After some searching I ended up finding this nearly…
************* UPDATE: V2 smoother/better version available here ************* Original model from rhcreations over at Sketchfab was made in Blender, which looks great in rendering software but when you export it the actual geometry was…
You can use the pause function to change the color as I did or simply print a single-color vase! This vase can be used for dried flowers, you can place a glass inside and use it for fresh flowers holding them in water, or simply as a…
Ghost bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/5cWb99a7tlI https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ Printing Base, head, and spring can be printed without supports. Ideal line…
Hello, here a wobble track for a marble run. Here a Video Here a other Video from someone else on youtube I would be happy to see some makes from you. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No…
***NIBBLER2 WITH HELTEC V4 SUPPORT AND A POWER SWTICH IS AVAILABLE FROM MY WEBSITE HERE *** Say hello to Nibbler, the tiny HeltecV3 or Heltec T114 “pocket” Meshtastic powered node. THESE PRINT FILES INCLUDE BOTH VARIANTS OF NIBBLER,…
I made this little clip for extra support for the original Side Spool Holder since without it it tends to bend after a couple weeks. Works with: https://www.printables.com/model/776235-ender-3-v3-seke-side-spool-holder-less-gantry-wobb…
This is a Princess Bubblegum crown I designed based on the refence screenshot show in the images. The model can be scaled up/down to fit your head size. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
A keychain with your or your family/friends first name, written in individual letter beads. The beads are connected flexibly with rings and move after printing. Its also nice for fidgeting . Note that this model is print-in-place, so no…
моделька с отдельной головой и местом под пружинку от шариковой ручки
This is a bobble-head Gnome toy. This toy uses a 3D printed spring and base. Supports are required only for the Gnome body and you can use minimal infill for all parts (10% is fine). This was made from a couple of different things. First…
A cute and tiny Christmas tree with wobbly legs. (40mm tall & multi-color -profile available!) The perfect Christmas gift or decoration accessory for your house! Works right off the print plate! (may need some wiggling to loosen the legs…
Inspired by bobble heads, this is a fun gnome Christmas decoration that can wobble side to side. There are two gnome designs to pick from: detailed and simplistic (each design uses the same spring and feet parts). The bobble head prints…
Printing time is approximately 106 hours (Pursa MK3s) with default print settings. Make sure you can print in TPU. TPU printing is intended for FIBERFLEX 40D, but any TPU with a Shore rating of 40D should do the trick. You can visit this…
This new version has much smoother surfaces when 3D printing since it uses Quad Meshes. I've also tweaked each letter shape while converting them so that they don't have any strange divots or creases.
A very quick to print edge protector for the raised edge on the pebble time 2 screen. Scale the model up or down slightly to get the best fit. Pictures show galaxy black PLA using a 0.6mm nozzle, and orange and matte blue PLAs using a…
Fed up with getting the mop out every time you clean the washing machine filter? I designed and 3D-printed a small, cust. It is made in PLA in two interlocking parts. Samsung Eco Bubble WF70F5E0W4W
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.3-0.6mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Barney Rubble, from the Flintstones cartoon show by Hanna-Barbera. The Flintstones cartoon takes place in a romanticized Stone Age setting, depicting the lives of the Flintstone family and their best friends and neighbors the Rubbles.…
Enhance your decor with this elegant bubble vase, designed specifically for printing in vase mode. Crafted to showcase delicate bubbles and intricate details, this vase adds a touch of sophistication to any space. Perfect for displaying…
“I finally printed something my wife loves!” ~ every guy with a 3d printer ever Add some eye catching and customized art to your living space! You could include your family's last name, all of your family member's names, and even Fido!…
Jerkbait Fishing Lure Description: Discover the innovative Jerkbait fishing lure, specially designed for discerning anglers like you. This lure allows you to adjust the casting weight and balance individually – easily through the Bambu…
Remix with increased height, more premade STLs, fixed mesh and better stand without a slope. Use the 3mf file and just scale the Z height of the “Z_wobble_Test_Tower” object in Slicer. Print in an grey-ish filament and not white, since…
Pebbles, from the Flintstones cartoon show by Hanna-Barbera. The Flintstones cartoon takes place in a romanticized Stone Age setting, depicting the lives of the Flintstone family and their best friends and neighbors the Rubbles. No…
This was made for my niece who love playing with bubbles. The bubbles it makes regularly exceed a foot in diameter. It seems to work best when waved in the air. The wand measures 100mm wide (about 4"). The bowl has a pour spout to make it…
If you'd like a commercial license to sell physical prints of this model (It's a best seller on Etsy), please join my paid Club membership . An adapter that clips a Fitbit air pebble to a normal watch band. Enables wearing the fitbit air…
![Princess Bubblegum Crown [Adventure Time]](https://media.printables.com/media/prints/111194/images/1095733_77537fad-a847-425f-acfa-a31bfcfc07f0/20210829_091348.jpg)
