Search results: bis

Sort order

1,818 models

P
PrintablesSASSy Design

Bismuth Crystal Plant pot and Planter - Vase mode design

A plant pot inspired by the perfect structure of bismuth crystals. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review…

Downloads
4,230
Likes
1,160
Rating
5
P
PrintablesFabianVeile

Tiny Fidget Toy (bistable)

Hi, this toy is tiny (19 x 32 x 3 (3.5) mm) and has a 3.5 mm hole on one side so that you can add it to your keychain. The switch in the middle has two positions, when you push the switch in upwards it snaps into its new position. If you…

Downloads
3,982
Likes
430
Rating
4.82
P
PrintablesBodo

Cableclips - Bistable Compliant Mechanism

Changelog 2024-12-21 v1.1 fine tuned print settings; cc 0.17; ct 0.18 2022-12-02 v1.0 initial public release Neatly organising the world of cables has lost a lot of hassle with these reusable cableties: The bistable mechanism quickly…

Downloads
3,215
Likes
1,551
Rating
4.84
P
PrintablesFabianVeile

Ultra Thin Pen (Bistable Compliant Mechanism)

Hello, this is my pen based on a bistable compliant mechnism. It is very thin (3 to 5 mm) and works with a standard BIC refill ( BIC Cristal). Its center of mass is located (approx.) on the first contact surface (seen from the actuating…

Downloads
2,455
Likes
818
Rating
4.38
P
PrintablesmoWerk

Small Trash Bag Dispenser / Holder for 35L rubbish bags / garbage bin liner

Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…

Downloads
2,027
Likes
425
Rating
5
P
PrintablesKLM1318

Bismarck Battleship

Now out! The HMS Hood that was sunk by the Bismarck! Get your model here: https://www.printables.com/model/776292-hms-hood (Printing and assembly instructions below) The German battleship Bismarck! Named after Otto von Bismarck and the…

Downloads
1,596
Likes
198
Rating
5
P
PrintablesMarianne657

Monstera and hibiscus - XL texture roller

Imprints clay with a beautiful Monstera leaf and Hibiscus flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed.…

Downloads
1,162
Likes
283
Rating
5
P
PrintablesDom Cis

Cubistic Prusa Pen

You will need to lead in the cartridge. The file contains 5 pens.

Downloads
1,038
Likes
271
Rating
4.5
P

Bishop Chess Piece detailed

This is a model of a detailed chess Bishop. I have also models for the other Chess Pieces and Pawns

Downloads
891
Likes
35
Rating
5
P
PrintablesFabianVeile

Bistable Compliant Keychain Gripper

Hi, this is a tiny but functional bistable compliant robot gripper. It's some kind of simplified version of my other Keychain Gripper . It's great for fidgeting or tinkering around with bistable mechanisms. In its initial position the…

Downloads
799
Likes
127
Rating
4.81
P
PrintablesDom Cis

Anubis - King of Egypt - MultiMaterial version

MultiMaterial Print instructions E1 Blue E2 Black E3 Gold E4 Orange

Downloads
779
Likes
170
Rating
4.86
P
PrintablesLoboCNC

Bistable Fidget

Click-click-click all day long on the chaise longue. The world doesn't really need another fidget toy, but hey, it's only 2 grams. Print in PLA using a 0.4mm line width. Insert the inner piece into the outer piece. Position the inner…

Downloads
526
Likes
109
Rating
4.46
P
PrintablesKutte

Pumpkin_Lamp - Halloween- Kürbislampe für elektr. Teelichter

Pumpkin lamp for table decoration e.g. on Halloween. !!Attention only use with electric tea light!! The tea light I use is 45mm by 45mm by 45mm in dimensions and fits easily. Works absolutely great and looks great. I uploaded two variants…

Downloads
490
Likes
35
Rating
5
P
PrintablesFabianVeile

Bistable Compliant Robot Gripper

Hi, this is a prototype of a bistable compliant robot gripper. Each side can be actuated individually by sliding the actuator in the centre. It is still in an early stage and will change in future versions. Its dimensions are approx: 42 x…

Downloads
384
Likes
84
Rating
4.9
P
PrintablesDavid Kisel

Anubis

Anubis

Downloads
382
Likes
49
Rating
4.67
P
PrintablesZhero

Bistable Fidget Button Compact

This is a remix of this model What I modified: Top Mod (see images): From Top.3mf Added the carved path of the arm Reduced the lower part to avoid scratching with the Arm Bottom Mod (see image) : From Bottom.3mf Added the carved path of…

Downloads
380
Likes
31
Rating
4.5
P
PrintablesDesign3D.JM

Caja con bisagra

Pequeña caja con bisagra para guardar herramientas o pequeños accesorios de nuestras impresoras 3D, como pueden ser: boquillas, pequeños tubos PTFE, llaves Allen o pequeños botes de lubricante para nuestras impresoras. Además, ¡lo puedes…

Downloads
375
Likes
20
Rating
0
P
PrintablesDom Cis
Downloads
355
Likes
65
Rating
5
P
PrintablesMrViddy

Mitsubishi Keychain

6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)

Downloads
330
Likes
37
Rating
5
P
PrintablesAA

Pen Gyroid + Cubic with Holder - Kugelschreiber Gyroid + Kubisch mit Halter

Pen Gyroid + Cubic with Holder Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini (with and without colorchange) Printfiles (G-Code) for MK3S and Mini (with and without colorchange) Simply insert the…

Downloads
324
Likes
97
Rating
5
P
Printables3DLabPrint

MiG 15 BIS

This are just test Gcodes (two) for more info (userguide) please look at: https://3dlabprint.com/shop/mig-15-bis/

Downloads
292
Likes
55
Rating
0
P
PrintablesAA

Spoolholder X2 (up to 4kg spools) - Filamenthalter X2 (bis 4kg Rollen)

Filamet spoolholder X2 The filament spool holder X2 for Prusa MK3 can hold any 1kg standard spool (also the 2kg Prusament PLA Recycled) as well as with the 2 different extensions spools up to 4kg or a maximum spool diameter of 350mm. The…

Downloads
288
Likes
48
Rating
5
P
PrintablesLomyr

Laptophalterung | Ständer für Laptops bis 21,5mm breite

Laptophalterung um den Laptop stehend am Schreibtisch zu positionieren. Das Hauptmodell habe ich von FizulNizam | Printables.com Wollte noch etwas Material und Zeit vom Ausdruck sparen und vielleicht noch etwas an 3D gewinnen. Breite…

Downloads
286
Likes
28
Rating
4.6
P
Printablespolmdm

Mitsubishi AC Remote Holder

Simple yet functional holder for Mitsubishi AC Remote. Double-side tape is required for mounting.

Downloads
230
Likes
8
Rating
4.5
P
PrintablesEFY

Basmalah Bismillahirrahmanirrahim Stencil Calligraphy

Özel bir hat sanatı yazısı ile bismillahirrahmanirrahim (Rahman ve Rahim olan Allah'ın adıyla başlarım) yazısını sizin için stencil haline getirdim. İnşallah işinize yarar. Yorumlarınıza göre geliştirebilirim

Downloads
227
Likes
20
Rating
2

Cannabis leaf - flexi

As in the topic at the top. Key ring for keys or anything else. Key ring can be printed PLA, PET-G for sure as you can see in the pictures. The maximum reduction is 45 mm in height. The ones visible in the photos are 55 mm high. They are…

Downloads
217
Likes
51
Rating
5
P
PrintablesCSConde

Mannesmann 215 - Bisagra

Bisagra para el cierre de la maleta de herramientas Mannesmann 215

Downloads
189
Likes
7
Rating
0
P
PrintablesAA

Pen Holder POLYGON Gyroid + Cubic - Stifthalter POLYGON Gyroid + Kubisch

Pen Holder POLYGON Gyroid + Cubic (2 Diameter) Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Version 80 inside diameter (corner to corner): 82mm Version 100 inside…

Downloads
178
Likes
35
Rating
4.67
P
PrintablesBandit

Mitsubishi RALLI//ART

This is a RALLI//ART keychain. Letters and stripes are offset in layer height so it is possible to set the colour to match the original logo. I got the best result if the keychain is enlarged to 150%.

Downloads
166
Likes
18
Rating
0
P
PrintablesSuperstar7277

Mitsubishi Eclipse Seat Back Panel Hook Replacement

I created this model because I took the seat out of a 06 Eclipse from a junkyard to put on my sim rig, and the seat back panel was being held on by a couple pieces of strings. When I took it off, I found that every hook(there's 5) that…

Downloads
156
Likes
4
Rating
0
P
PrintablesNicolas

Halter für 1/2" Nüsse bis 19mm

Halter für 12 Nüsse mit !/2" Antrieb bis ca. 19mm. Mit Rastfunktion. Anfangs etwas schwehrgängig, aber das gibt sich, Print instructions Infill 10%, PETG, 150%

Downloads
130
Likes
12
Rating
0
P
PrintablesPeter Farell

Bishamonten, Guardian of the North, 13th C CE

Bishamonten, Guardian of the North, 13th C CE "Bishamonten, Guardian of the North, 13th C CE" (https://skfb.ly/oLBnS) by Minneapolis Institute of Art is licensed under Creative Commons Attribution-ShareAlike…

Downloads
129
Likes
25
Rating
0
P
PrintablesGFS

Keychain with logo. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota.

Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…

Downloads
118
Likes
5
Rating
0
P
PrintablesMadeinSwabia

Bayerisch-Schwäbische Brezel

Hello friends from all over the world :) This is a piece of art. Handmade in a craft bakery. By the way, there are several types of "Brezen”. This is the “bayerisch-schwäbische Brezel” You can find it in Schwaben, in the west of Bavaria…

Downloads
93
Likes
2
Rating
0
P
PrintablesLucky

Emporte pièce Biscuit Pac Man Père Noel

Pac man pour pâtisserie maison… Emporte pièce 89x63 mm EP 17 mm Fichiers impression en pièce jointe.

Downloads
90
Likes
17
Rating
5
P
PrintablesFilPyr

Bissell pet hair eraser charging station

Bissell pet hair eraser charging station. Print instructions Category: Tool Holders & Boxes Summary Bissell pet hair eraser charging station. Print Settings Printer Brand: Prusa Printer: I3 MK3S </div> Rafts: No Supports: No </div>…

Downloads
83
Likes
3
Rating
0
P
Printablesbsprange

Bissel Vacuum Adapter for D shaped nozzel to 32mm or 1 1/4 inch

I was frustrated with not being able to use standard vacuum attachments with my Bissel vacuum since it has a proprietary ‘D’ shaped nozzel. This adapter changes the nozzel to a standard household vacuum nozzel of 32mm or 1 ¼". The…

Downloads
83
Likes
5
Rating
0
P
PrintablesWatchmakerT

Adjustable Feet for Furniture up to 15cm / Einstellbarer Fuß für Möbel von 9cm bis 15cm

Ein einstellbarer Fuß für Möbel, dieser wird mit 3 Schrauben an dem Möbelstück befestigt und kann dann mit der großen M30 Schraube in der Höhe eingestellt werden. Lässt sich einfach drucken mit PETG oder PLA. Das Innenteil ist 3% kleiner…

Downloads
79
Likes
9
Rating
5
P
PrintablesLumanieri

Helpful Bin Signs - Recycling, Rubbish, Return & Earn

Hello. For ages, my partner and I kept putting the wrong things in the wrong bins in our kitchen in our new place. We eventually got use to it, but then we noticed that whenever we have guests over, whic is a few times a month, they will…

Downloads
73
Likes
17
Rating
0
P
PrintablesMatthew Schultz

Signo Mitsubishi UNI Uni-ball Gel Ink Pen (0.38 mm) Stand

I needed a stand for my Signo Mitsubishi UNI Uni-ball Gel Ink Pen (0.38 mm) set, so I designed one. The top and base print without supports. The struts have minimal and easy-to-remove supports. The tolerance for the press-fit struts is a…

Downloads
51
Likes
11
Rating
5
P
PrintablesPeopleware

"Wallbox" für Typ 2 /Schuko Lader für Mitsubishi Eclipse Hybrid

Mit dieser Halterung ist der Typ 2/Schuko Ladeaadpater aufgeräumt nd gleichzeitig wird Last von der Steckdose genommen, das ist vor allem dann wichtig, wenn ein Zwischenstecker zur Verbrauchsmessung zum Einsatz kommt. Ich habe das Teil…

Downloads
46
Likes
6
Rating
0
P
PrintablesHuf
Downloads
44
Likes
5
Rating
0
P
PrintablesMadeinSwabia

Schwäbische Brezel

Hello friends from all over the world :) This is a piece of art. Handmade in a craft bakery. By the way, there are several types of “Brezen”. This is the “Schwäbische Brezel”. You can find it in the west of southern Germany, in the east…

Downloads
33
Likes
5
Rating
0
P
Printablesoltas

Adapter Duotone Wing für elektrische Luftpumpe bis 25 PSI.

Die elektrische Luftpumpe bis 25 psi hatte keinen Adapter für meinen Duotone Wing. Ich habe einen konstruiert und gedruckt. Er funktioniert prima. Vieleicht kann ihn ja der eine oder andere auch gebrauchen. Gedruckt in PETG oder PLA. Die…

Downloads
29
Likes
4
Rating
0
P
PrintablesBlacky51

Zahlen Zwirbel 0 bis 9. V2.0

PLA Füllung 20% Schichthöhe 0,3mm ohne Stützen, mit Rand (zusätzliche konische Achse, damit Achse zu allen Löchern passt)

Downloads
29
Likes
5
Rating
1
P
PrintablesAlex_P

Mitsubishi Starion logo for the rear spoiler (multicolour)

If you miss your 3rd brake light for your Starion or you want something extraordinary, you can print these parts. First you have to print the “starion-adapter.3mf” which is mounted in the slot of the 3rd brake light. Then you can either…

Downloads
26
Likes
2
Rating
0
P
PrintablesNikoG00110

The Cubistic Vase

This is one of my favorite vase designs. This vase cannot be printed in vase mode. The presliced gcode is 180mm x 180x 60mm. The overhangs can be challanging but the presliced model has enough support material. I dont recomend removing…

Downloads
24
Likes
7
Rating
0
P
PrintablesOlaf

Bissell Featherweight Nozzle Holder

I think the model name says it all just snap it on and slide the attachment in and you're done.

Downloads
21
Likes
1
Rating
0
P
Printables3ric74

Ball Mount Raspberry Pi4 Kit Labists

J'avais besoin de fixer le boitier de ma Raspberry Pi4 dans la Prusa Enclosure. C'est un boitier de chez Labists qui a un insert de vis M6. J'avais déjà installé une rotule dans l'Enclosure : merci à InnesPort…

Downloads
20
Likes
1
Rating
0
P
Printablescmoi

bouton de vetement bis

voici un bouton de vetement PLA, 0.2, 100% remplissage.

Downloads
19
Likes
3
Rating
0
P
PrintablesJoergH

Scangrip Universal Halter für Manfrotto Leuchtenstativ - Nova R bis Nova SPS 6

Scangrip Halter für Manfrotto Leuchtenstativ - Hält Nova R bis Nova SPS 6 Wird lose aufgesteckt. Die Leuchte wird eingehängt und kann gut verstellt werden. Nova R hält am besten, da der Bügel gummiert ist. Fotos zeigen Nova R und Nova SPS…

Downloads
18
Likes
1
Rating
0

Jimothy the Seattle Raccoon Cookie & Biscuit Cutter Set — Bring Cookies to Your Next Jimothy Party!

You may have heard of Jimothy, the scrappy Seattle raccoon with a unique spinal condition. This printable set lets you bake your own tribute: square cookie presses with positive and negative embossing plus outline cutters for classic…

Downloads
16
Likes
7
Rating
0
P
PrintablesNÄRD

XIAO ESP32-C5 Case – Insert lid, Switch or No Switch, Keychain / Quick Clip DIY Biscuit

A small, tool-free case for the Seeed Studio XIAO ESP32-C5 and a 5x25x35 mm (502535-type) 3.7 V LiPo battery. It is designed for portable projects like trackers, scanners, sensors and wearable gadgets. Features Fits Seeed XIAO ESP32-C5…

Downloads
13
Likes
1
Rating
0
P
Printablesfanyn2289

bird fish /bish 3d image

Ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas ahlelele ahlelas…

Downloads
7
Likes
3
Rating
0
P
Printables3DLabPrint

Mitsubishi A6M2 "ZERO"

A6M2 “Zero” is the next of new LW Planes series designed for easy and cheap flying. The build is simple even for a beginner. It’s very low weight, easy assembly and fantastic flight characteristics makes this model an ideal plane for…

Likes
78
Rating
0
P
PrintablesR3D

Cute Pokémon Bulbasaur / Bisasam Planter

Update 2023-09-03: Uploaded additional variant without a drain hole This Bulbasaur Planter will decorate your window sill or sideboard or… every place! Fits: Scale 100%: Every standard 5-6 cm plant pot. Best to plant a succulent or smal…

Downloads
16,562
Likes
3,919
Rating
4.95
P
Printablessafpep

Bistable fidget button

Another satisfying fidget toy. All parts are printed with 0.4 mm nozzle and 0.2 mm layer height no special settings are required. I simply used pieces of filament for the axes of the moving parts. Assembly The image below shows all the…

Downloads
4,667
Likes
1,427
Rating
3.87
P
PrintablesFreedomMaker

Egyptian Anubis low-poly Statue

Egyptian Anubis low-poly Statue It would really help me out if you could "like" and "download" this model. Thank you for your support. Semper Fidelis Support and Licensing: If you would like to help support more free models or get…

Downloads
4,247
Likes
896
Rating
4.75
P
PrintablesJAV3D

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Downloads
3,984
Likes
563
Rating
4.83
P
PrintablesJBoe

Wire Stripper / Cable-peeler / Kabel-Abisolierer

Object description: This wire stripper is as the title says, a tool which cuts in the outer insulation of a cable that you can easily peel it off. I made the experience that a lot of professional tools work with a spring mechanism and cut…

Downloads
2,900
Likes
445
Rating
4.84
P
PrintablesUFAB

Halloween Kürbis/Pumpkin

Ich habe für das Modell Glow-in-the-dark PLA Filament verwendet! Sieht nachts super aus! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa Slicer die maximale Druckgeschwindigkeit auf 80 mm/s eingestellt.

Downloads
2,879
Likes
601
Rating
4.97
P
PrintablesJohnny0518
18+

The source marked this model as adult content.

Downloads
2,871
Likes
371
Rating
4.67
P
PrintablesFabianVeile

Keychain / fully working compliant Robot Gripper (bistable)

This is a fully functional bistable compliant robot gripper for your keychain. In its initial position the gripper is closed, when you push the switch in the middle upwards it snaps into its new position. This opens the gripper. The…

Downloads
2,675
Likes
488
Rating
4.71
P
Printablesben4096

Bison Skull

I couln't do any specific work on this one due to a restrictive licence but it prints well. It should be easy to separate the horns if you want to be able to print it at ful size. 3dmf is what I think is an optimal orientation and setup…

Downloads
2,251
Likes
648
Rating
5
P

Biseokchigi - Flying stone (Squid Game 2)

Biseokchigi , in English Flying stone , is a game played in the 2nd season of Squid Game.

Downloads
2,211
Likes
75
Rating
4.86
P
PrintablesLopata_255

Stitch cookie cutter / biscuit cutter

Stitch cookie cutter from Lilo and Stitch Disney movie. I made 2 version of this design : "2 pieces Stitch cookie cutter". One stamp and one cutter. For me the easier to used. This version works with thin or high thick of dough. "One…

Downloads
2,119
Likes
301
Rating
4.82
P
PrintablesLyl3

Cannabis Cookie Cutter - Marijuana Leaf

This is a cookie cutter in the shape of a cannabis leaf. The shape isn't the most realistic because it's designed to make cookies that don't have any weak areas that would make them too fragile to be practical. Cookies made with this…

Downloads
2,109
Likes
293
Rating
5
P

Mitsubishi Lancer Evolution 4 / Evo IV Kit Card

Update 26.05.2024: Added version for 4-color multicolor print (AMS & MMU). Summary This is a model of a Mitsubishi Evo 4 (Lancer Evolution IV) in a kit / gift card style. Some characteristic details can be discovered. Equipped with…

Downloads
1,954
Likes
407
Rating
5
P
PrintablesBYU CMR

Bistable Compliant Switch

Summary This bistable switch is an example of a compliant mechanism with a four-bar mechanism pseudo-rigid-body model. A contact force is created by causing the contacts to connect before the second stable equilibrium position is reached.…

Downloads
1,936
Likes
192
Rating
4.27
P
PrintablesBondFire

Anubis

Egyptian statue Anubis! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire

Downloads
1,896
Likes
446
Rating
5
P
PrintablesPomeranč

Anubis pen holder

Anubis pen holder

Downloads
1,857
Likes
319
Rating
5
P
Printablesahaque

Bistable Auxetic Structure (Parametric with OpenSCAD)

Bistable Auxetic Structure Overview Structure expands to create dome and locks in place. Inspired by this video . The paper by Tian Chen and colleagues can be read here . Code linked here and available for download below. 3D Printing Info…

Downloads
1,848
Likes
231
Rating
4.75
P
PrintablesRoops

Broom holder - wall mounted bistable

As suggested from the audience, it seems what i made remix of some remix of THIS GREAT Model ! So take a look there too - maybe you'll find something more suitable there!!)) But please note that I did not steal that model. As a prototype,…

Downloads
1,794
Likes
604
Rating
5
P
PrintablesR3D

Pokémon Bulbasaur / Bisasam Planter

This Pokémon plant-pot has a lot of 3D surface detail and will decorate your window sill or sideboard or… every place! Updated Version: STL #2 is modified with an optional drain hole. Still I'm marking this as a reupload since changes…

Downloads
1,728
Likes
286
Rating
4.95
P
Printablesar3Dprints

Cannabis Leaf and Keychain

http://www.prusa3d.com/#a_aid=3090

Downloads
1,704
Likes
114
Rating
4.75
P
PrintablesJerryie

Mitsubishi Lancer Evolution kit card

Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…

Downloads
1,543
Likes
335
Rating
4.67
P
PrintablesMartin

Mothership of Anubis - Stargate

This is the mothership of Goauld Anubis. It has mechanism inside which allows it to retract the superweapons. All the moving parts are linked into that mechanism so one movement will do all. Appart from that, it comes with a fleet of 8…

Downloads
1,437
Likes
389
Rating
5
P
PrintablesKolbi

Halloween Cookie Biscuit Gingerbread Cutters 6 Pcs, Coffin, Ghost, Bat, Witch, Grovestone (Tombstone), Pumpkin, Scarry House ( Hounted House), Cat

Halloween Cookie Biscuit Gingerbread Cutter (approx 45-50 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…

Downloads
1,435
Likes
184
Rating
4.8
P
PrintablesKolbi

21 Easter Cookie Biscuit Gingerbread Cutters (butterfly, cat, egg, flower, hen, chick, rabbit, sheep, bunny, duck, duckling, goose, hen, chicken, lamb, rooster)

Easter Cookie Biscuit Gingerbread Cutter (approx 50-60 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…

Downloads
1,431
Likes
221
Rating
5
P
PrintablesMario

Gardena Combisystem Holder

I needed something to store my gardening tool, so I decided to print my own bracket for my garden shed. The purpose was to be able to screw the bracket against a wall with up to 4 screws if necessary. On the inside there is a hexagon to…

Downloads
1,429
Likes
219
Rating
4.93
P
PrintablesGraFabLab.com

The Cyber "Bishop" – chess piece

If you’d like to get this model or explore even more of our work, including full figurine collections, exclusive designs, commercial licenses, and other great perks, you can find everything on our Patreon—see you there:…

Downloads
1,387
Likes
256
Rating
5
P
PrintablesEnely

Cakes and biscuits

Cakes and biscuits in Sylvanian Families or Playmobil size. Read more at https://enelys3d.netlify.app/Cakes_and_Biscuits/

Downloads
1,297
Likes
271
Rating
5
P
PrintablesNagyBig

3D Hibiscus flower

Print the petals and shape them accordingly. I used my oven as a heat source here because I didn't have a heat gun at the time. Note that the petals on the middle of the print supposed to fuse a little bit together, I found this as the…

Downloads
1,290
Likes
209
Rating
4.75
P
PrintablesDeltaX_F

KMS Battleship Bismarck

I've been trying to make a model of Bismarck for years at this point, and I've never really gotten it quite right. That is, until now, because I finally sat down and actually put effort into it. The hull was challenging, to say the least,…

Downloads
1,166
Likes
133
Rating
5
P
PrintablesJaneo

Mitsubishi keychain

Mitsubishi car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 80% to make it more comfortable and less bulky.

Downloads
1,155
Likes
131
Rating
5
P
Printablesodonnell944

Bradley Smoker Bisquette Press

Video of this in action, with context: Check out online recipes for making the mixture, using sawdust, potato starch, etc. A PDF is also attached here in the files section, with the recipes from the linked video. This print is done in 3…

Downloads
1,029
Likes
30
Rating
5
P
PrintablesNic Randy

Buffalo / North American Bison skull

Best to print on resin printer, but can be sliced into pieces to print on FDM printers

Downloads
986
Likes
113
Rating
5
P
PrintablesSabu8

Mitsubishi lancer EVO Silhouette Wall Art

This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…

Downloads
968
Likes
175
Rating
5
P

Mitsubishi 3000GT / GTO VR4 Kit Card (1:24 scale)

Summary This is a model of a Mitsubishi 3000GT / GTO VR4 (Z16A / Gen 1) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts and spoiler ;-) After printing, the model can be assembled with…

Downloads
955
Likes
261
Rating
0
P
PrintablesSenki_86

Anubis

Thank you for downloads, likes… Enjoy !

Downloads
952
Likes
149
Rating
5
P
PrintablesBYU CMR

Bistable Compliant Mechanism

Summary This bistable compliant mechanism was developed by the BYU Compliant Mechanisms Research group (compliantmechanisms.byu.edu). This model shows the bistable behavior that can be achieved by using a single print compliant mechanism.…

Downloads
903
Likes
82
Rating
4.83
P
PrintablesDeltaprints

Low Poly Anubis Bust

Once again, I’ve given in to my love for Ancient Egyptian art and would like to share this Low Poly Anubis Bust with you today. :) In my opinion, Anubis is one of the most mystical and enigmatic figures of antiquity. This sculpture…

Downloads
899
Likes
174
Rating
5
P
PrintablesKadeen92

Hibiscus Earring

Arete con diseño de flor hibiscus. Esta diseñado para imprimirse a 3 tonos. El .gcode generado esta preparado para imprimir en una Ender 3, Ender 3 Pro.

Downloads
898
Likes
104
Rating
5
P
PrintablesKolbi

Christmas Cookie Biscuit Gingerbread Cutters (vykrajovátka na sušenky perník Vánoce) Part_02 13Pcs, Angel, Bell, Bow, Carp, Fish, Comet, Shooting Star, Horseshoe, Christmas Tree, Church, Pig, Roll Croisant, Snowman, Star, Anděl, Zvoneček, Mašlička, Kapr

Christmas Cookie Biscuit Gingerbread Cutter (approx 55 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…

Downloads
873
Likes
111
Rating
5
P
PrintablesJoel

Cannabis Leaf Keychain

Lock up your stash! This is a remix, modified so I could attach a set of keys. I thickened it up and extended the stem, then made a hole thru it for a keychain.

Downloads
853
Likes
116
Rating
5
P
PrintablesAlan Duggan

German Battleship Bismarck

German Battleship Bismarck from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.

Downloads
831
Likes
38
Rating
4.75
P
PrintablesRawlus
18+

The source marked this model as adult content.

Downloads
826
Likes
280
Rating
4.8
P
Printableslayer.works

Bistable Compliant Fidget Clicker

Full credit: these remixes are based on a Brigham Young University Compliant Mechanisms Research (BYU_CMR) Group design posted on Thingiverse . Check out their user page on Thingiverse or their webpage for other great compliant mechanism…

Downloads
801
Likes
110
Rating
4.73
P
PrintablesAndRey Zea

Print in Place Hinge | Bisagra print in place

Print in Place Hinge Print in Place Hinge with two countersunk screw holes on both flaps. No assembly required, print ready to use. 3 cm wide with an opening capacity of up to 180°. Bisagra impresión en el lugar Bisagra print in place con…

Downloads
788
Likes
51
Rating
4.5