LayersFactory
Report model
1 / 3
XIAO ESP32-C5 Case – Insert lid, Switch or No Switch, Keychain / Quick Clip DIY Biscuit — image 1
1 / 3

XIAO ESP32-C5 Case – Insert lid, Switch or No Switch, Keychain / Quick Clip DIY Biscuit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

NÄRD

NÄRD

@antonionardella

Compact insert lid case for the Seeed XIAO ESP32-C5 with a 5x25x35 mm 3.7 V LiPo. The onboard antenna sits in the lid.

Rating
0 / 5
Likes
1
Downloads
12
Makes
1
Views
106
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsFiles (13)Makes & comments (Makes: 1) (Comments: 4)Remixes (0)Collections (2)Related

A small, tool-free case for the Seeed Studio XIAO ESP32-C5 and a 5x25x35 mm (502535-type) 3.7 V LiPo battery. It is designed for portable projects like trackers, scanners, sensors and wearable gadgets.

Features

  • Fits Seeed XIAO ESP32-C5 plus a 5x25x35 mm 3.7 V LiPo

  • Friction-fit plug lid closure with no screws or glue

  • The original onboard antenna sits in the lid, so no external antenna is needed

  • Available with or without a power switch

  • Mounting options: keychain ring, or Quick Clip Gen 3 base on top or on the side

  • Source files in FreeCAD and Blender

Variants / files

Variant

Switch

Mount

Plain

No / Yes

None

Keychain

No / Yes

Ring

Quick Clip, top

No / Yes

Quick Clip Gen 3 base on top

Quick Clip, side

No / Yes

Quick Clip Gen 3 base on the side

Each variant comes as a body and a lid (STL). Source files are in the Sources folder (.FCStd and .blend).

What you need

  • Seeed XIAO ESP32-C5

  • LiPo battery 5x25x35 mm, 3.7 V (check polarity matches your XIAO's battery pads before connecting)

  • Optional: Slide switch  (repurposed a 12x5 switch)

  • Optional: Quick Clip Gen 3 Buckle, printed separately from the original model

Assembly

  1. Solder the battery to the BAT pads on the XIAO (or the switch in series with the positive lead, for the switch version).

  2. Insert the board with the USB-C port aligned to the opening.

  3. Place the battery in its pocket and tuck the wires away.

  4. Press the lid on.

Print settings

  • Material: PETG

  • Layer height: 0.2 mm

  • Infill: 15–20 %

  • Supports: for keychain and quick clip version

  • Orientation: body opening up, lid flat on the bed

Credits
The Quick Clip mounting variants are designed to work with the Quick Clip Gen 3 Base Starter Kit by TaylorSteinf_1252185 (https://www.printables.com/model/587654-quick-clip-gen-3-base-starter-kit).

That model is not included here. Please download it from the original page and respect its license.

Tags

caseclipenclosurebatteryfitsnapkeychainiotlipoantennawearablequickseeedbiscuitxiaowdgwars