Search results: brim

Sort order

222 models

P
Printablestuc0w

Ender 3/5 PLA Temp Tower (BLTouch + Brim)

Why I remixed it I remixed this one because of a comment I read from DERacing: "I get around the 220 mark and the part snaps away from the glass bed." and exactly the same happend to me and as I couldn't find any premade Temperature Tower…

Downloads
886
Likes
22
Rating
4.8
P
PrintablesMarius Bendsen

IKEA Shelf Support Pin (HEMNES/BRIMNES) - 110525

Bought a used HEMNES bed that was missing a bunch of these 110525 pins. Printed in two parts and then squezed together. Printed on Anycubic Kobra Neo with 0.4mm nozzle in PLA.

Downloads
151
Likes
20
Rating
0
P
PrintablesFreshPrints

Anycubic Kobra 2 Pro Bed Level First Layer Calibration Squares and Brim Test Also works with Kobra 2 / Kobra 2 Neo

This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…

Downloads
6,450
Likes
304
Rating
4.89
P
PrintablesFreshPrints

Anycubic Kobra 2 Max Bed Level First Layer Calibration Squares Aligned with Bed Screws and Brim Test

This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…

Downloads
4,939
Likes
194
Rating
5
P
PrintablesUnderfrog

Articulated Octopus Fixed - No Brim

The original articulated octopus is extremely hard to print, this one creates rings that act as a partial brim.

Downloads
3,822
Likes
415
Rating
4.94
P
PrintablesJon Blackford

Hat Brim Bender

A simple tool to bend your hat brim to hold a curve while steaming it!

Downloads
3,761
Likes
225
Rating
4.82
P
Printablesradicalreel

Gizo the Spider easy brim remove RMX Halloween

https://paypal.me/radicalreel Remix of MerganMcFergan's Gizo the spider. I'm not a fan of rafts so i made a Brim which is only partially conneced. I added slight support too source: www.thingiverse.com/thing:5044727

Downloads
3,644
Likes
776
Rating
4.94
P
PrintablesTeque5

Friendly Articulated Snail (ezbrim)

This Friendly Articulated Snail is a remix of thing:4847937 by Nebetbastet which is actually a remix of Isaiah 's Slug. This version just has the protrusion to allow the snail shell to attach. This blender remix allows easy printing with…

Downloads
3,127
Likes
720
Rating
4.4
P
PrintablesTeque5

Friendly Articulated Slug (ezbrim)

This Friendly Articulated Slug is a remix of thing:4727448 by Isaiah that allows easy printing with default settings by adding a simple brim that connects all the parts on the bottom and just peels off once you finish printing. I created…

Downloads
3,042
Likes
271
Rating
4.81
P
PrintablesGuido666

Updated Articulated Crystal Dragon by Saber3D (100% Size, 2 Colors, No Brim) - Fixed for XL 2T

"Articulated Crystal Dragon by Saber3D" had a few versions, namely the original and an "Updated" set of models that has better/thicker connecting rings. The "Updated" models would not load in PrusaSlicer with the correct multi-material…

Downloads
2,887
Likes
493
Rating
4.67
P
Printablesbasti30

Lucky13 easy print without brim

Connecting the small parts with a one-layer-high line. This helps to adhere the small starting surfaces to the bed. Much easier to remove than a brim. Prusa project files are available to customize further.

Downloads
2,184
Likes
387
Rating
5
P
Printableskmarty

Articulated Axolotl (added selective brims)

Just "discolored" remix with added brim on selected areas

Downloads
1,842
Likes
116
Rating
4.69
P
Printablesgeorgmierau

HSW dripping brim (remix)

A decorative "dripping" (or "melting") brim attachable to the original honeycomb wall by RostaP . It's available as a single solid piece (16 hexagons, 333×77×8 mm) and split in 2 parts (8 hexagons, ~170×77×8 mm each) fitting a regular…

Downloads
976
Likes
518
Rating
5
P
PrintablesKali

Sky Team Boardgame Sliders (thin brim)

I did some small changes on the design by Qualith . I did not change the internal dimensions, so you can also use the Knobs from the original design . Additionally I created a frame, so you can use the ice breaking module with the raised…

Downloads
734
Likes
90
Rating
5
P
PrintablesLolcio

Ender 3 V3 KE Screen Reposition Holder. No Support, No Brim. Less Footprint.

Model printed in PLA and PETG in Creality Print on the standard "Normal" profile. Layer height 0.2, nozzle 0.4, filling 15%. Brim and support disabled. Pins should be printed separately, Brim and support optional, but not suggested, with…

Downloads
704
Likes
93
Rating
4.25
P
PrintablesActionBowman

Gentleman's Hat Hook (Great for brimmed hats!)

I couldn't find a good hat hanger out there for a larger brimmed hat. Did a few variations so maybe something works for you - I found the one with a “catch” at the end to be best for larger cowboy style hats. Settings I prefer to do these…

Downloads
671
Likes
56
Rating
5
P
PrintablesMymif

Cap Brim/Bill Bender

A tool to keep your hat brim in place while you steam it.

Downloads
533
Likes
63
Rating
4.67
P

Flip-Up Brim Clips: The Sunglasses Cap Hack

Instead of throwing away a favorite pair of sunglasses after an arm snaps off, this model gives them a completely new, hands-free lease on life. This design allows you to securely mount a pair of glasses directly to the brim of any…

Downloads
486
Likes
464
Rating
4.5
P
PrintablesBaRoN30s

SIMPLE INCENSE STICK HOLDER - WIDER BRIM

This is a copy of another I download But noticed the brim wasn't as wide as it could be & the ash was falling all over the place. Also, the centre hole was too small for the cheap incense sticks I was buying. So redesigned it with a wider…

Downloads
471
Likes
43
Rating
5
P
PrintablesJelle

Ancient Guardian Articulated from Zelda BOTW (pre-brimmed)

I had some issues printing this model so I added some brims to the problematic parts.

Downloads
460
Likes
46
Rating
4.5
P
Printablesthall72
Downloads
412
Likes
49
Rating
0
P
Printablesthall72
Downloads
383
Likes
51
Rating
0
P
Printablesthall72
Downloads
335
Likes
44
Rating
0
P
Printablesscottg

Adjustable Hat Brim Bill Bender

I have a hat and I needed to bend the brim. So I made an adjustable hat shaper, bill bender, brim curver tool. Quick, easy print, works great, thought I'd share. 0.20mm layers 3 walls 8% infill, Triangles No brim, no support Print time 1h5m

Downloads
330
Likes
29
Rating
5
P
PrintablesBloblis67

Deburring Tool & Brim Remover

🟩 First and foremost: I’ve worked hard on this, so I’d love to see your creations, folks! 🙏😜 Have you ever lost your deburring tool right when you needed to clean up a print, only to realize a replacement from overseas will take weeks to…

Downloads
315
Likes
119
Rating
5
P
PrintablesRodi01

Hat Brim Bender for 59Fifty

Remix of the Hat Brim Bender with a softer curve, perfect for 59Fifty hats. Comfort and style in one design!

Downloads
296
Likes
16
Rating
0
P
PrintablesDeeDee

Brim Curler 12mm Hat Making Tool

Brim Curler 12mm Hat Making Tool

Downloads
282
Likes
17
Rating
0
P
Printablesfreiform

Card deck holder / table organizer - Shadows of Brimstone and others

Two versions, 6c holds 6 decks of regular, sleeved cards, 5c holds 4 regular decks and larger materials such as the hero and enemy sheets of Shadows of Brimstone. This has been inspired by the Hold-It! card organizer. If you have any…

Downloads
266
Likes
20
Rating
5
P
Printablesvoidbubble

Igneous Brim (Vase)

Billions of years of tectonic forces and magma flow in the making, culminating in your very own sandstone vent. Open source version of https://cosmicjubilee.com/designs/igneous-brim/ - available to buy now! The ridges on this vase are…

Downloads
258
Likes
77
Rating
5
P
PrintablesLeeMcFeathers

Gridfinity 2x3 Hollow With Brim

Gridfinity 2x3 Cell. This is the most basic unit of the Gridfinity system developed by Zach Freedman. This bin includes a tab for labels and a scoop in the internal angles for easy removal of hardware and small parts.

Downloads
243
Likes
6
Rating
0
P
Printablesnumber4please

Modern Gridfinity Case - Latches_Links_5x without brims

The original brims are very hard to remove so I got rid of them. All credits to Matthew @unrepentantgeek

Downloads
209
Likes
32
Rating
5
P
PrintablesPurchenZuPoden

FOOT FOR BRIMNES CHESTS/CABINETS | IKEA 153548 158568

This is a copy of the original IKEA BRIMNES Plastic Gliding Foot. I redesigned it because I needed different feet heights. If you have a uneven floor like me you can simply print higher or lower feet. I have added also the STEP-File if…

Downloads
194
Likes
14
Rating
5
P
PrintablesBl4x xun

Valoi 360 Film scanning mask for 35mm Film with paper brim

In the past, some photo labs put paper brims on negatives for easier holding. Sadly, this means they are not compatible with the default valoi 360 mask for 35mm film, so I designed this one. Printed on the side with supports, I've printed…

Downloads
185
Likes
9
Rating
5
P
PrintablesDeeDee

Brim Curler 9mm Hat Making Tool

Brim Curler 9mm Hat Making Tool

Downloads
183
Likes
14
Rating
0
P
PrintablesDuše

Sky Team + Turbulence - Kali's Insert with Brim

Kali's Insert with Brim in one piece

Downloads
178
Likes
20
Rating
5
P
PrintablesElphwrkz

QIDI X-CF PRO EXTRUDER CASE UPGRADE CELEBRIMBOR

Higher quality prints, quieter operation and easier to use. These were the main goals for this X-CF Pro extruder case upgrade. It uses the existing hardware with the exception of the 30x30x10 heat block fan is replaced with a 40x40x10…

Downloads
175
Likes
31
Rating
0
P

BrimHart Board Game Table Accessories

Created a few trays/accessories that are compatible with the BrimHart Board Game table slots. All parts designed to print on 225x225x280mm print bed but you can scale the width if you want bigger trays. Have only Printed Small tray and…

Downloads
160
Likes
24
Rating
5
P
PrintablesSvanne

Remote holder for IKEA BRIMNES bed

This is an easy remote crontrol holder for IKEA BRIMNES beds. It fits on the Side of the beds and also at the bed head. It fits not to tight at the bed edges. You can add some felt to not scratch the surface. Only one option to print it…

Downloads
160
Likes
32
Rating
5
P
Printablesmultilayers

NUMBERS AND LETTERS EBRIMA BOLD FONT

HOUSE MAILBOX DOOR NUMBERS AND LETTERS 150mm(height) X 110mm(width) X 2mm(thickness). Resize in slicer as required. Printed on ender 3, ender 3 s1 and bambu lab x1 using PLA Easy to drill into. Make small guiding holes if screwing in.

Downloads
156
Likes
13
Rating
0
P
PrintablesOnu_Heino

Celebrimbor

If you want my models early, please consider supporting me on patreon - patreon.com/onuheino

Downloads
152
Likes
27
Rating
5
P
PrintablesPhobos

Shadows of Brimstone Extendet Sidebag

I wanted an extended sidebag for token like grit, corruption, bleed and other status effects. There is also a compartment for cards that are not currently in use

Downloads
134
Likes
14
Rating
5
P
Printablesthall72

Lego Compatible (30167.dat) Minifig Hat Wide Brim Flat

This model is compatible with the lego system.

Downloads
130
Likes
29
Rating
5
P
Printablesbce.gatien

Mouse Ears (Brim Ears)

Those are simple models. 0.2mm thick mouse ears. You can import them in your slicer and position them in the corner of your project instead of using a brim. It is not as sturdy as a brim, but way simpler to remove.

Downloads
130
Likes
11
Rating
0
P
Printablesfubarbarian

Shadows of Brimstone Collapsible Side Bag & Town Token Holder

I wanted a token tray for a Shadows of Brimstone insert I'm trying to finish up. I only have 40mm of height left to work with so I altered BasHamer's design to make it collapsible. I also removed two of the token shafts, so the trays rest…

Downloads
129
Likes
16
Rating
5
P
Printables3D Printiverse

BRIM Line Test

BRIM line test for the thicknes and stability Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Notes: Set BRIM line in Cura or your slizer app for 10mm. The test is for your BRIM lines if its…

Downloads
122
Likes
3
Rating
0
P
PrintablesJobis

brim ear

a 20x0.2mm circle to put in the corners of your STL to keep it from warping up too easily. ex printing a box out of ABS. scalable but 20mm is usually enough. useful if your slicer doesn't have this feature or if the settings for it is…

Downloads
119
Likes
9
Rating
5
P
PrintablesAtome3D.com

MasterSpool Atome3D v2 ( No Support / No Brim )

MasterSpool Optimisée pour Filament Refill | Optimized MasterSpool for Refill Filament Design amélioré et léger sans compromettre la solidité. | - Improved, lightweight design without compromising strength. Impression plus rapide. | -…

Downloads
118
Likes
16
Rating
5
P
Printablesthall72

Lego Compatible (13788.dat) Minifig Hat with Wide Brim Down

This model is compatible with the lego system.

Downloads
116
Likes
17
Rating
0
P
PrintablesSylex3D

Cap Brim Bender

3D Printed Cap Brim Bender - V2 A simple way to make your hat fit better and more comfortably. Simply choose which bend you want (mild or aggressive), insert your hat, and leave for 24 hours.

Downloads
114
Likes
66
Rating
5
P
Printablesikverhaar

Turbo dart - thicker brim

(edit: see my updated darts here: More Turbo darts ) The original turbo dart with a slight modification to handle stronger elastic bands. It should also help decrease the wear and tear when using regular elastic bands. Have Fun. :)

Downloads
112
Likes
12
Rating
0
P
PrintablesBimpy

Greek Pillar Bookend with Brim

Brim for added support

Downloads
111
Likes
20
Rating
5
P
Printablesthall72

Lego Compatible (90538.dat) Minifig Hat Fedora with Wide Brim

This model is compatible with the lego system.

Downloads
110
Likes
24
Rating
0
P
PrintablesDarkreign69

Spool Brim for cardboard Spools

Spool brim for cardboard spools to reduce friction from certain spool holders X2 for each spool, and attach with 4 small drops of CA glue around the edge. When the spool is empty just pull off, scrape any residue off and reattach to new…

Downloads
102
Likes
17
Rating
0
P
Printablesthall72
Downloads
100
Likes
26
Rating
0
P
PrintablesPhobos

Shadows of Brimstone Gunslinger Six Shooter Template and Storage

I wanted a 6 shooter with storage for all the tokens and no accidental slipping of those. Assembled without glue. Print Settings Printer Brand: Prusa Printer: I3 MK3 Rafts: No Supports: No Layer: 0.15 Infill: 15 Filament: Fiberlogy PLA

Downloads
99
Likes
8
Rating
0
P
PrintablesJames Tate

Wall mount for Broad brim hat

The size can be adjusted with the parameters in fusion 360. Just measure the length and width of you hat's headband. After taking your hats measurements I recommend printing the size template in the downloads. Print this in vase mode for…

Downloads
98
Likes
19
Rating
0
P
PrintablesJan Vejtasa

R3C quadro with added local brim for supports

I made this to prevent the supports from falling.

Downloads
94
Likes
0
Rating
0
P
PrintablesAlcatrazz210

Brim Clip Pencil Holder

Got sick of carrying around my stub pencil behind my ear so I made this to get it out of the way

Downloads
93
Likes
3
Rating
3
P
PrintablesPatriana

Compact organizer for TV remotes, tab computer, pens and bits and pieces. 20 x 16.3 cm. No supports! Should use a brim, though.

I needed room and still easy access for the remotes and other stuff we need in a hurry. There's even room for a glasses spray and cleaning cloth! I am really pleased! The picture shows the one and only print I made. I have reworked the…

Downloads
89
Likes
15
Rating
0
P
PrintablesShynd

Flashlight Hat/Cap Brim Clip

Needed a clip for my flashlight (WOWTAC W1) to attach to the brim of my baseball-style hat for computer / automotive / electrical / etc work in dim places. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…

Downloads
88
Likes
11
Rating
0
P
Printablesgleonard3

Baseball Hat Brim Form

Not a fan of a flat brim. This forces the issue nicely. Leave it overnight, or longer.

Downloads
86
Likes
29
Rating
0
P
PrintablesEef

Precise Brim Ears preventing Warp

EDITED: A simple correction to the method I describe makes it much more easy: 1. After adding the brim ears, just merge them with the object to be printed. (All about negative part etc, can be skipped). 2. Even better solution: - place a…

Downloads
85
Likes
6
Rating
5
P
PrintablesJörg

IKEA Skadis - shelf with brim

Skadis shelf with brim for my solder station. You also need the support brackets from the original thing. https://www.thingiverse.com/thing:2811277 Inner dimensions 140mm x 115mm Print Settings Printer Brand: Creality Printer: Ender-3 S1…

Downloads
82
Likes
9
Rating
0
P
PrintablesRobrob

Large Cupholder for Brimhart Gaming Table

Recently purchased the Brimhart Board Game Table from Amazon and the first thing everyone notices is the “cupholders' are really ”can holders, which is fine and all, but for those that don't just pound canned soda and beer, I designed a…

Downloads
81
Likes
17
Rating
5
P
PrintablesFriedmutant

Shadows of Brimstone Exploration Token Holder

A holder to help protect your stack of Shadows of Brimstone Exploration tokens from getting knocked over during game play. Sized for exploration tokens that have been placed inside coin capsules. Bare tokens will probably slip right out.…

Downloads
80
Likes
6
Rating
0

Various Brim Ears for Sharp Corners

These are scalable ears for corners or small sections of your print. The unique designs allow you to put the ears in spots that can be easily removed. They are approximately 13mm in diameter (0.50") and approximately .5mm thick (0.02").…

Downloads
79
Likes
27
Rating
5
P
PrintablesFlops

Milk Crate with Brim

I always run out of these little crates, so i made an optimized version so they can be made en masse on my Creality CR-30. The crate features a little brim at the front to help with bed adhesion. You can add support to the front if you…

Downloads
71
Likes
13
Rating
0
P
PrintablesLeeMcFeathers

Gridfinity 2x2 Hollow With Brim

Gridfinity 1x1 Cell. This is the most basic unit of the Gridfinity system developed by Zach Freedman. It perfectly fits sticky notes and many other objects.

Downloads
71
Likes
3
Rating
0
P
PrintablesC Fink

Rolling Tray w/ Transfer Spout and Grinder Brim

I liked the size of the original tray but wanted a way to keep an herb grinder from sliding around, so added a simple circular ridge. As you can tell by the picture I did not need the full diameter of the ridge for my SLX grinder (62mm)…

Downloads
69
Likes
5
Rating
0
P
PrintablesHottoDogu

Insta360 Go Under Brim Hat Mount

The intent of this model is to better capture POV footage so that it is more inline with what your eyes are actually seeing. The stock hat mount that comes with these cameras is OK for this, but it situates itself so far forward on the…

Downloads
68
Likes
10
Rating
0
P
PrintablesTzana

Ikea brimnes handle for large furniture

I made an Ikea Brimnes handle to replace the one eaten by my dog. Size : 20cm, for large furniture

Downloads
66
Likes
13
Rating
5
P
PrintablesLeeMcFeathers

Gridfinity 1x1 With Tab, Scoop, and Brim

Gridfinity 1x1 Cell. This is the most basic unit of the Gridfinity system developed by Zach Freedman. This bin includes a tab for labels and a scoop in the internal angles for easy removal of hardware and small parts.

Downloads
66
Likes
5
Rating
5
P
PrintablesPrzemek 031

The Binding of Isaac: Brimstone Fridge Magnet

Are you ready to trade your heart containers for some serious laser power? This is a clean, 3D-printable model of the iconic Brimstone symbol (Leviathan Cross) from The Binding of Isaac . The back features two pre-designed circular…

Downloads
62
Likes
8
Rating
5
P
PrintablesJan Mader

No-Hardware IKEA Lack Side Table Extender 100mm with higher brim

Remix from: No-Hardware IKEA Lack Side Table Extender/Stacker - The brim is higher to better hold the top table.

Downloads
62
Likes
7
Rating
4.5
P
PrintablesBlindside_o0

Woah! Stencil With No Brim!

Notes: The part is thin enough (1.5mm) to cause warp if you peel it up too before the temperature goes down. The Gcode has a pretemp of 140° so the bed can reach temperature first. The Gcode provides a raised Z position to allow a moment…

Downloads
62
Likes
9
Rating
5
P
PrintablesWazanator

Shadows of Brimstone Small Exploration Token Holder

The exploration tokens in Shadows of Brimstone are kind of a key component but the stack of tokens is easy to knock over so I made this little token holder for them. I like a lot of the other token holders people have made but my group…

Downloads
61
Likes
8
Rating
0
P
PrintablesDed Makar

Glamour in a Wide Brim Hat

If you downloaded the model, it means you are interested in it. Don't forget to like it, please!

Downloads
60
Likes
5
Rating
0
P
PrintablesaRGiRob

brim test

brim test You can find all my models here , thank you who will appreciate with a download or with a like

Downloads
59
Likes
7
Rating
0
P
PrintablesRobo90

Brim Gap Test (Kenarlık Boşluk Testi)

This 3mf file allows you to test different brim gaps to find out which peels the easiest without detaching. The text is automatically not included in the final print. Bu 3mf dosyası farklı mesafede kenarlık boşluklarını kolayca test…

Downloads
59
Likes
4
Rating
5
P
PrintablesPeter Fields

Brimnes Bed Shelf Extender

I got fed up of having to get up or lean out of my bed to put my phone or airpods down so I designed this BRIMNES bed shelf extender. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15%…

Downloads
58
Likes
15
Rating
5
P
PrintablesMihovecDesign

Brimstone Keycaps Valorant (Multiple Designs - Variations) Bundle

Custom Brimstone Valorant Keycaps for Cherry Mx Profile (mechanical keyboards). Make your keyboard more unique! Bundle includes 20 keycaps with different designs. Round type: -4 ability keycaps (outwards) 3D profile (flat surface) -4…

Downloads
57
Likes
11
Rating
0
P
PrintablesDr Stache

brim cutter - adjustable - millinery

adjustable brim cutter using a slider that locks into place with holes on the side of the cutter and slider. i use a long nail, but a piece of strong wire would work as well with printing, i stopped at the layer just below the level of…

Downloads
56
Likes
6
Rating
3
P
PrintablesProto Squirrel

IKEA Brimnes Nightstand Handle

The handle on my Nightstand split, so I printed a new one and I thought I'd share it here. I think I printed it with 25% infill. Support is not needed. The holes aren't quite deep enough, so a power screwdriver or drill is necessary to…

Downloads
56
Likes
9
Rating
5
P
PrintablesWazanator

Shadows of Brimstone Town Organizer

I liked Razorheads daily town event box but I wanted something that could hold the unwanted attention tokens and the devils head as well. So I designed a new one! Mine has two slots for cards, the bigger one fits the town deck sleeved…

Downloads
53
Likes
3
Rating
0
P
PrintablesPeuqui

Brim Ears for better bed adhesion

I noticed, that the inbuilt brimears in some slicers are far too weak. So I designed some more durable, which can be merged with the model. Included are versions with 0,4 and 0,6 mm height. I recommend the lower one, it is strong enough…

Downloads
52
Likes
4
Rating
0
P
Printablesm_collectable

Sport Ball Hat Cap Brim Attachable Charms - Tennis Volleyball Baseball Soccer

Attach a sports ball charm to the brim of your baseball hat 🧢. Choose from the following sports: 🎾 Tennis ⚽ Soccer (European Football) 🏐 Volleyball ⚾ Baseball Printing Tips: Supports are needed A brim is also needed to have enough bed…

Downloads
51
Likes
23
Rating
0

Brim calibration

brim gap from 100um to 200 um. Make first layer concentric

Downloads
51
Likes
3
Rating
0
P
PrintablesFriedmutant

Shadows of Brimstone Town Location Token Storage Tube

Storage tubes for Shadows of Brimstone Town Location tokens, for tokens that are held inside 48mm coin capsules. Town Locations Tube - holds the 12 tokens from either Frontier Town or Feudal Village. Barter Locations Tube - holds the 6…

Downloads
50
Likes
3
Rating
0
P
PrintablesFriedmutant

Shadows of Brimstone Enemy Faction Clip

This is a super simple model that goes really well with my vertical Shadows of Brimstone Enemy Sheet holders . This keeps all those faction, tribe, trait, and other similar cards connected to their respective Enemy Sheet, making it much…

Downloads
49
Likes
9
Rating
0
P
PrintablesMaxyboy2404

EZ Pass holder for tesla model 3/Y brim holder

This 3D-printable E-ZPass holder is designed specifically for mounting your transponder on your Tesla's windshield, keeping it discreet, easily accessible, and out of the way on the windshield. Perfect for drivers who prefer a clean…

Downloads
48
Likes
8
Rating
0
P
PrintablesWoodenDavid

Drawer Pull for IKEA BRIMNES bed

I kept bruising my shins on the sharp wooden drawer pulls of the drawers of my IKEA BRIMNES bed. These replacement drawer pulls are smoothly contoured so they won't hurt me. Lightly edited from https://www.thingiverse.com/thing:3911914 My…

Downloads
48
Likes
6
Rating
0
P
PrintablesGM

Gridfinity - 2x2 bin with/without brim - stackable with magnets

This bin is a 2x2 gridfinity bin with a brim. I designed it so it better holds my collection of rubber bands. For that reason it also supports using magnets at the top for better stability when stacking other gridfinity objects or to hold…

Downloads
48
Likes
14
Rating
0
P
PrintablesVSP

IKEA bed pin for BRIMNES and HEMNES bed (part no.: 110525)

Bought a used BRIMNES IKEA bed for my son, upon putting it together realized, that a few of the pins holding the bed slats were missing. While IKEA would send these small parts for free, it would have taken two weeks to arrive from…

Downloads
47
Likes
4
Rating
0
P
PrintablesRinjamin

Brim Ears (with settings)

Just import the file into prusaslicer. Settings are included. Place one into each corner.

Downloads
45
Likes
8
Rating
0
P
PrintablesDiego López

Ikea brimnes cable holder

Ikea Brimnes Bed cable holder

Downloads
44
Likes
12
Rating
5
P
PrintablesMatěj Groman

Cable insert for IKEA BRIMNES

One of the frustrations with the IKEA BRIMNES bed headboard (https://www.ikea.com/cz/en/p/brimnes-headboard-with-storage-compartment-white-60228712/) was that the charging cable kept falling behind the bed and it was really hard to get it…

Downloads
44
Likes
12
Rating
5
P
Printablesiloosion

Ikea Brimnes Bed Spacers

These spacers are made to raise the bed off the floor by 25mm, enough so that the storage drawers can be easily used when you have carpets/rugs around the bed. Additionally, they allow the underside of the bed to aerate/breathe,…

Downloads
42
Likes
11
Rating
5