716 models
Lots of fun with a bubble straw that produces a ton of bubbles for the kids. Use: Make sure the tip of the straw is submerged in the bubble solution for best performance. See the photo with the red line. I've included the .3MF that uses…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
If you wish to be a distinguished gentleman, this is the bubble pipe for you! Created at my brother's request. My goal was to try and make a bubble pipe that could produce larger bubbles, instead of the standard heap of tiny bubbles that…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Modern 80's themed pot and planter for your house and garden plants (mostly inspired by bubble gum) Print settings: Vase mode (best to print in 2 or 3 layer vase mode [regular vase mode just with more outter layers]) Used materials:…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.3-0.6mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Print approx. €15.69–€19.17 excl. taxPreliminary estimate for one variant
"BEST MOM" BUBBLE KEYCHAIN Celebrate the wonderful mothers in your life with a sweet and modern keepsake! This "Best Mom" Bubble Keychain is a key addition to our Love & Mom Collection . It features a modern "puffy" or bubble-letter…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.3-0.6mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Print approx. €18.98–€23.20 excl. taxPreliminary estimate for one variant
Bubble letters Set up the 3mf so the letters are individual .obj so you can use the ones you need and easily duplicate.
Print approx. €5.94–€7.27 excl. taxPreliminary estimate for one variant
Use your PET bottle to blow bubbles with a Bubble Wand cap. Bubble juice information can be found at the following link: https://soapbubble.fandom.com/wiki/Bubble_Juice_Basics
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
🛠 Materials & Hardware: 🧵 PLA Filament (Multiple Colors) ➡ PLA Green -> [ https://amzn.to/48kWvNJ ] 🧶 TPU Filament (Flexible) ➡ OVERTURE GREEN -> [ https://amzn.to/49bm6sS ] 🔑 Keyring Split Rings (25mm) ➡ [ https://amzn.to/41RZ3zh ]…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Snowboard made as a desktop fidget toy on principles of bubble head figures. How to print: it is necessary to print spring with 100% infill tested on PLA
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
This is a set for children to make large and small soap bubbles. Of course, it goes without saying that soap and water has to be provided seperately. :) Printing: From my experience support for the ring itself is not needed, but support…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
ver. 1.0 the arrangement of the internal air flow and the associated greater weight load to prevent floating you need: layer 0.2mm nozzle 0.4mm support under intake pin 100% infil
Print approx. €6.72–€8.21 excl. taxPreliminary estimate for one variant
This is a small profile, economical, strong, easy to print and assemble spool holder for the MK3S & MK3S+ with 608 bearings for smooth rolling. Each side has a retainer to prevent spools from jostling around, which also lends strength to…
Print approx. €4.51–€5.51 excl. taxPreliminary estimate for one variant
🛠 Materials & Hardware: 🧵 Silk PLA Filament (Pink) ➡ [ https://amzn.to/42ui233 ] 🔑 Keyring Split Rings (25mm) ➡ [ https://amzn.to/41RZ3zh ] "LOVE YOU" BUBBLE KEYCHAIN Spread affection and carry a little love with you everywhere! This…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
LOVE & MOM COLLECTION: "LOVEYOUMOM" BUBBLE KEYCHAIN Celebrate Mom with a gift as sweet as she is! This "LoveyouMom" Keychain is the flagship piece of our new Love You Mom Collection , designed specifically for Mother's Day. It features a…
Print approx. €0.36–€0.43 excl. taxPreliminary estimate for one variant
This is a remix of the Mr. Sparkle Wall Art created by ImaginaryTragedy. The files containing Mr. Sparkle's head/face are exactly the same. What I did is create a 3D image of the text bubble that is on the Mr. Sparkle box. I am brand new…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Salut , Voici une impression pour créer une bouteille à bulle de savon à partir d'une simple bouteille (Compatible avec les filetages "pco1810"). 2 pièces à imprimer et à coller ensemble J'ai créé une pièce "Validation_Filetage.stl" qui…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for PETGSource material: PET
Print in vase mode, preferably with a translucent filament. The minimal surface connecting the edges of a cube has three stable states. Each has a square in the middle, but the square can be perpendicular to the X,Y, or Z-axis. The…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
End cap for PowerXT 24" level (YT24A00). One cap was missing on mine & the exposed metal was a bit sharp. This printed PLA part press fits tighter than the original. Print with the exposed end facing up. Full supports underneath since…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
This is a 15x15x40mm bubble level holder for Vixen-styled dovetail bars. And the hole pattern fits dovetail bars made by MoreBlue. p.s. A slim version V2 is added.
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
Replacement part for the Fru Blu bubble gun (I'm sure it's sold under other brands too) for connecting the bottle with the bubble fluid. The original bottle connector is thin and can be damaged if dropped.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
🫧 Baby Bubble Blowing Box 🫧 Tiny box, many bubbles, endless joy! Do you also have a forgotten 5V axial fan in your workshop? Turn it into a whimsical bubble-blowing machine with this compact and clever print! The Baby Bubble Blowing Box…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
You can scale this down and cut the height down to what you need. I print these at a .5mm to .6mm external parameter and they look great with thick layer lines. Inspiration from UAU project.
************* UPDATE: V2 smoother/better version available here ************* Original model from rhcreations over at Sketchfab was made in Blender, which looks great in rendering software but when you export it the actual geometry was…
You can use the pause function to change the color as I did or simply print a single-color vase! This vase can be used for dried flowers, you can place a glass inside and use it for fresh flowers holding them in water, or simply as a…
This is a Princess Bubblegum crown I designed based on the refence screenshot show in the images. The model can be scaled up/down to fit your head size. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Fed up with getting the mop out every time you clean the washing machine filter? I designed and 3D-printed a small, cust. It is made in PLA in two interlocking parts. Samsung Eco Bubble WF70F5E0W4W
This new version has much smoother surfaces when 3D printing since it uses Quad Meshes. I've also tweaked each letter shape while converting them so that they don't have any strange divots or creases.
Enhance your decor with this elegant bubble vase, designed specifically for printing in vase mode. Crafted to showcase delicate bubbles and intricate details, this vase adds a touch of sophistication to any space. Perfect for displaying…
This was made for my niece who love playing with bubbles. The bubbles it makes regularly exceed a foot in diameter. It seems to work best when waved in the air. The wand measures 100mm wide (about 4"). The bowl has a pour spout to make it…
My friend upgraded her hermit crab enclosure so I upgraded my original pool model with a bubbler attachment. I still no nothing about hermit crabs so let me know if theres a way to improve it!
A pencil tube with a bubbles design and screw top. Great for school Easy to print, no supports @3DPrintBunny
Every grand kid has to have their own bubble wand! It's the law!
Introducing an enchanting bubble texture design plant pot. Elevate your indoor oasis with this contemporary twist on traditional plant pots. The captivating bubble texture adds depth and intrigue, making it a standout piece in any room.…
I had some issues with printing these in spiral mode, so I just printed the two in the photos with zero infill, no top layers, with 5 parameters.
check https://soapbubble.fandom.com/wiki/Soap_Bubble_Wiki for fluids Water Glycerin Corn syrup Dish soap Washing soda or baking soda (small amount pH dependent )
Basic bathroom basket with bubble design and draining holes.
A simple Reusable Bubble Tea Boba Straw to satisfy your bubble tea addiction. We are able to print it like a leaning tower with the slanted side touching the print bed. If you decide to use it as a straw, remember to print with food grade…
Bubble Crab 🦀🛀 Fun toy for creating lots of bubbles. Attach the eyes to the crab with glue. It is not necessary to glue the tube if you want to remove it. Pour a little soapy water into the crab's mouth and slowly blow into the tube…
This airstone is easily printable and can be adjusted to your needs Printing: In order to be safe in your fishtank, i recommend using PLA. Print all parts in the given orientation. No support needed. Layer hight of 0.2 (or finer)…
This is a cute Fake Bubble Candle for decoration
To prevent the bubble level from getting trashed, which comes with every Ubiquiti Unifi Access Point, i designed this carrier thing for the bubble level to snap in. Print it with the slide-opening looking upwards with your most liked…
Printed in PLA+. For the fan I printed it on its face using Support W as an interface material. You'll need two bolts and some washers and nuts to assemble this version. Here's a video: https://vimeo.com/860332009/291d8b5e1e?share=copy…
Bubble Cup from my Bubble Bathroom Accessories Series. Can store Brushes, Pencils or Flowers, anything you want :) Looks extra cute in matt and pastel PLA. Check out my other matching designs such as the Bubble Soap Dish or the Bubble Bowl.
Inspired to this video. If you like this project, take a moment to buy me a virtual coffee … If you are interested in other content like this, contact us in chat. Follow us and contact us for other requests:
Small set of bubble vase models. Intended for printing with vase mode. Printing tips: 1/ You can create many variations in the slicer itself. Try different scaling in X, Y or Z. Try cut the model and then scale etc. 2/ Try to increase…
Hi everyone ! This is my version of an automatic bubbles machine. The objective of this project is to practice some Arduino coding and to (of course) make some bubles. Please enjoy and have fun! Please don't forget to check the video of…
A miniature of bubble milk tea. It has no particular usage. The “Tea” (MMU parts) and the “Cup” (Vase parts) are separated. The MMU parts are mean to be printed together with MMU or other multi-material printing techniques. The Vase parts…
Air injector to add air to fertilizer supply tank for hydroponics Video link https://youtu.be/dntHLFqrS6Q Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament:…
A very simple holder for (spirit or bubble, however you want to call them) levels for HSW. It fits levels up to 22mm in depth. Printing settings (Honestly a bit overkill) Layer height: 0.2 Perimeters: 4 Infill: 20% Supports: Yes (I used…
Note: Please download zip. file with individual letters and place on buildplate as you desire. Tip: https://buymeacoffee.com/uniquedude See more stuff: https://cults3d.com/en/users/UniqueDude/3d-models
This is a fully customizable Comic Sign/Speech Bubble with optional magnets you can have 1 or 2 lines of text in any of the pre-seleceted Fonts. The sign can be in customized in many ways. Preview colors can be defined separately for…
Print it with your normal settings.
Bubble Pencil holder with a vertical line patter do trick your brain and hide the layer lines. Print instructions (This are the parameters that was used for the printed part in the photos) Nozzle: 0.8mm Layer height: 0.15 Print speed:…
This model is compatible with the lego system.
Any type of bubbles. Created on tinker-cad so you don't have to run to the store to get one
Axolotl Bubble Tea Key Chain - Fun and simple print. Simple keychain with an Axolotl
Beim mixen von 2K Massen habe ich immer wieder das Problem, dass dabei viele Luftbläschen eingerührt werden. Durchs Vakuumieren wird es deutlich besser, aber ich wollte einen Rührstab der weniger Luft ein mischt. Deshalb ist dieser sehr…
3d benchy turned into an aquarium bubbler printed hollow then drained so that it sinks Category: Pets
Vaso decorativo stampabile in 3D con design organico a fori circolari stile bubble/voronoi. La forma arrotondata e la struttura traforata lo rendono ideale come oggetto d’arredo moderno, portapenne, contenitore da scrivania, coprivaso o…
this prints very easy with no supports. It looks much better if you iron the top.
hello World this is my frist project on Printables! this is bubble wands designed by me on autodesk tinkercad! here is link to remix it: https://www.tinkercad.com/things/epElVTgY8Ao-bubble-wands-design-challenge you can also find me on…
This is Bubble from "The Amazing Digital Circus" as a Penholder
Simple sponge filter parts with a printable bubbler. Needs cell sponge to complete.
Welcome to my slightly overengineered soap bubble wand called “ THE BLACK HORNET p1 ” (approx 10cm diameter) ( Please refer also to “THE BLACK HORNET p2” which is an addition to this). This soap bubble wand came to life by a request of…
“Introducing the Bubble Vase — a custom 3D-printed design that explores the intersection of texture, form, and material. Both the cylindrical and cubic versions feature a distinctive tactile surface achieved through the use of the ‘fuzzy…
Decorative Vase, designed to be printed in Vase mode. Like it? This Model is part of a batch of vases I released. Find the other vases here
This model is compatible with the lego system.
The GI Joe Classified Trubble Bubble was lacking a flight stand, so I made a little attachment that fits on the bottom and has a hole for a 6mm peg compatible with Mezco flight stands. Now fly, my pretties!
Part of my Bubble Bath Baskets collection A basket intended to hold a bubble bar and keep it in place beneath a bathtub faucet. Bubble bars are often purchased from stores such as Lush and are used to make bubbles for bubble baths. There…
This is a replacement bubble wand for Fubbles Bubbles no-spill bubbles. I made the opening a bit larger so its easier to blow a bubble.
This is an improved version of the original heliochronometer sundial base design. It allows one to level the base and make true north adjustments without any additional hardware. It is also compatible with the original heliochronometer…
Printed in Eryone TPU which has a 95A Shore hardness. It should work even better with a slightly softer TPU. Printed without supports.
For the aspiring artist, use this speech bubble template in your blocking. Features two sizes of standard bubbles, and three auxiliary shapes for thoughts, transmissions and dread. Post pics in the comments!
This cute bubble bowl can be used to store and organise items, or simply be placed to decorate your home. I use it in my bathroom to organise my shampoos :) More design variations are coming soon, stay tuned.
This is a simple "bubbler" style dual-chamber airlock for home brewing. Note: still having trouble with getting prints to reliably hold liquid. I'm pretty sure it'll work if I print in PETG, but with PLA it's giving me trouble. Update…
A thin and functional bookmark inspired by the Star Trek Insignia.
a wind powered bubble machine. for table or bike. or moped?. or car? Category: Mechanical Toys
👋 Hi! I design 3D mold boxes for silicone molding, perfect for creating candles, pastry pieces, resin figures, soaps, and more. ✨ Join our Discord (https://discord.gg/ACuzkKFaRE) to meet other mold makers, get tips, and stay updated on…
A friend of mine needed a hermit crab pool, so I designed this. In order to make it water tight I would suggest using PETG with a wall width of 1.4mm. Try to make your layer levels as thick as you can. This will give water less spots to…
Free model I whipped out for my Thangs. *For commercial license STL files, check out my Thangs and subscribe. I will be updating Thangs consistently, while only my free models will be available on Printables (non-commercial).
This model pays a sincere tribute to the CERAMIC BUBBLE LETTERS HANDCRAFTERS , traditional artisans and sign painters. Collection of 3D letters with a puffy, fun design and a glossy finish, optimized for hassle-free 3D printing. This…
Ubiquiti Unifi Bubble Level keychain
Blow Perfect Bubbles—Every. Single. Time. The ultimate bubble tool for parties, weddings, and kids of all ages — from toddlers to grandparents — this clever little gadget makes bubble magic effortless. Two 3D‑Printable Designs, Endless…
This model imitates the feeling of bubble wrap! It might be a little stiff for some printers at the start, but with a bit of force it will go. Have fun!
If you like this project, take a moment to buy me a virtual coffee … If you are interested in other content like this, contact us in chat. Follow us and contact us for other requests:
Blank slightly wider speech bubbles (3)
Simply rotate the level slightly to insert it in the top mount. Then lower it into the bottom mount. Reverse this sequence to get it out. Attach with your chosen method. If you need drywall anchors, try these.…
Whether you’re a fan of classic milk tea or adventurous fruit blends, this charming Boba Tea (Bubble Tea) keychain is the perfect way to carry your favorite drink everywhere you go. Designed for bubble tea lovers and collectors, this fun…
This is “ THE BLACK HORNET p2 ”an addition “ THE BLACK HORNET p1 ” (a bubble wand with approx 10cm diameter) The wand structure consists of four parts ( please refer to the colored picture above): Part One and Part Two - upper ring…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Lost the applicator to the scrubbing bubbles fresh gel toilet bowl cleaner. Made a replacement. Supports required.
In case your bubble stone is damaged and you need a quick replacement I've made this one. It's designed to fit onto standard air tubing but I provide also original OpenSCAD file so you can modify it to your needs. Modifications allow…
Modern Bubble Planter Pot A stunning silhouette and beautiful finish make the Bubble Pot a very interesting flower pot. Printer settings: Massive Layers on top: 0 Perimeter: 3 Infill: 0% Additional notes If you like this design, please…
![Princess Bubblegum Crown [Adventure Time]](https://media.printables.com/media/prints/111194/images/1095733_77537fad-a847-425f-acfa-a31bfcfc07f0/20210829_091348.jpg)
