7,089 models
🤨 Update 3/1: WE GOT THE GRAY TROPHY LET'S GOOOOOOO (seriously somehow I've had a lot more trouble getting one of the gray ones than the gold one) Update 2/16: v2 has been added! This one is a little more stable. Also, now I have a…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
BIG RED BUZZER / EMERGENCY BUTTON (Grobhandtaster / Not-Aus) I always wanted to have one of these "big red buttons". Print instructions Material: For the bottom half of the base, I used black PETG from "Das Filament", for the upper half I…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
I was working on a project where I needed to mount 2 buttons and I realized that I only bought 1 breakout board. Since I didn’t want to order another one and wait for it to show up, I designed a small mounting plate. The dimensions are…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
button aid - helps close buttons for people with arthritis or limited use of their fingers. prints in 30 minutes no supports
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
I needed a simple way to mount 12mm pushbutton for a recent project ( foot switch ), so I made this. There are 2 versions (with 2 screw holes and 4 screw holes), each for m1.6 , m2 and m3 screws. I printed mine out of PLA and didn’t have…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
One version with holes and one without.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
After slacking/slaving away all week long in my T-shirt and jeans, I like to dress up in my stiff collar shirt with cuff links. Don’t we all?! So you’re going to want to use this ready-made cuff link base design for all your wonderful…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Printed without support with cylindrical pins (3mm diameter, 14mm length) you can connect multiple of these units together. CAD Model…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
JEEP Lovers. you were not forgotten Here's your button
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Safety cover for M22 Eaton box. I printed from ASA and the strength is great. It is equal to the original.
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
My plushie needed some eyes. These eyes are just right! Diameter: 35mm Total Thickness: 5mm You could totally use these as regular buttons too if you want!
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Remixed to add holes so that buttons can be pressed intentionally, but are still protected from accidental activation. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 80+ Supports: No Print…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Our kids love their Dyson toy vacuum. So it gets used quite often and from time to time looses its buttons. Most of the time we find them and put them back in, but lastly one got lost, so I made this replacement which fits very nice and…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Love my BunkerKings CTRL loader for paintball, but spacing between the button on the shell and the board made it harder to press. I designed this small spacer to fit inside the shell membrane and it activates the board power much easier.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant
button, coaster, dripper (two colours)
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Recommended print settings: Material: PLA or PETG Layer Height: 0.1 mm Infill % : 15+ Supports: No Print Orientation: Default as modeled Raft: No Brim: No Add a color change at layer 3 for contrast in the text.
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for one variant
The contact is designed in the same way as 505DA002 or 505DA001, and can therefore be inserted into an LK FUGA frame Baseline 50.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Button designed as a Deathly Hallows symbol. Quick and easy to print with no supports and no bridges. If you were interested in commercially using my models you can check out my Patreon. patreon.com/3dprintree
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
If you want to use your lego men as buttons this is the tool for that. Print this tiny button legman holder and sew it on your Cap or close. Then you are ready to attach the log man of your choice.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Introduction and Use Case I am replacing some of my wall light switches with Zigbee scene controllers. One of the controllers I use is a “ Tuya ZigBee Smart Home Button Scene Switch Smart Linkage Smart Switch Battery Powered with Smart…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
Popis CZ: Upravená náhradní díl pro otočný ovladač stmívače LED světla. Tiskové parametry: Podpěry : bez podpěr. Filament : PETG, nebo PLA. Výška vrstvy : 0,15 - 0,2 mm. Infill : 100 %. Postprocesing : Není nutný.…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
Lid button for my favorite 64Hydro/Embrava water bottle broke, so I had to make new one. Printed in PETG with 0.4 nozzle and 0.1 layer height
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
This innovative model is specifically crafted to enhance the Xiaomi Round Button by adding a functional and aesthetic glow-in-the-dark attachment. Perfect for those who need to locate their device in low-light conditions, the attachment…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
I needed a way to attach the gold greeble "button" to the 89 Sabers Skinnyflex being able to remove it later with little work involved. This is designed to have a 6mm x 3mm magnet for the center. You need to glue the magnet in to where…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
An extended version of my remix to fit the wise words of Reddit user SGrim01 “WTF is the *%*&% MMU doing now?” Added a blank version as well. I did not test this at all, so good luck.
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for PETGSource material: PET
A 20mm diameter button with a flat face, a filleted edge, and the PS:1 logo on the face.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Do not use Prusament PVB. I use it because I don´t have Prusa Orange PLA, only Prusa Orange PVB.
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
I recently got a soldering kit for Christmas, and I thought the buttons were a little bit boring. So I thought I might as well design my own. I modeled them in FreeCAD and then printed them on my MK4S with a few color swaps here and there…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Replacement push button for the Icy Dock MB982SP-1S 2.5" to 3.5" hard disk adapter cage. The original part is made of fairly brittle plastic, and due to the heavy swinging door often hitting it with force in a particularly nasty way, the…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
The button off my Lezine light is broken. I remplace it by a 6x6x7 push button (see pictures). Ask for more question. DjeDje
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Zanuzzi oven Button protector Designed by R_vdk Application / Functions As my kid (1.5y) keeps pushing the buttons of my oven (and installing alarms at random times, which scare the hell out of us), I made a quick bracket which blocks the…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
This is a small but very useful printout for resetting a small opening button that is missing on an umbrella. I just glued it to the metal part of the mechanism.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
We needed a button for our drink-randomizer game built using my LED-Drink-Coaster-Puzzle . I had this button, so I designed this box. Here you go :-) Printing any nice material, e.g. Prusament Galaxy PLA support: yes but with bigger…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
High powered rocketry requires use of rail buttons to retain the rockets to the guide rails. The rail buttons are either affixed using wood screws into the rocket body or with weld nuts that don't mount flushly against the inner rocket…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Valentýnská brož na připnutý spínacím špendlíkem.
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Glow-in-the-dark base for Smart Button This base is compatible a Smart Button that is 45 mm in diameter). It should make finding the button on your night stand easier in darkness. The base is not designed to stick or be mounted to…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
Simple button to make removing the PTFE tube from the AMS buffer a little easier. There are 2 versions. One is a permanent install, and the other slips over the tube so it can be removed.
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
Print-in-Place Fidget Button A compact, stress-relieving gadget designed for endless tactile satisfaction. This fidget toy is perfect for anyone who enjoys clicking, pressing, and fidgeting to stay focused or calm their nerves. The…
Raspberry Pi 5 Case Inland Filament Used: Raspberry Red PLA+ Raspberry Red PLA+ on Amazon Printer Settings: Nozzle Temp: 220° Bed Temp: 60° No Supports 15% Infill Print Time: 1 HR 15 Mins Speed: Standard Bambu Settings Measures 92mm x…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the older style of AMS feeding funnel that has a slim press button.…
Another satisfying fidget toy. All parts are printed with 0.4 mm nozzle and 0.2 mm layer height no special settings are required. I simply used pieces of filament for the axes of the moving parts. Assembly The image below shows all the…
Print-in-place model to hold button-style or cylindrical batteries. Some example models are included, and the OpenSCAD source code is provided, for full customization. Instructions below are for button-style batteries. The version for…
This is a 2-state click button with an internal mechanism similar to that of a retractable pen. This can be used with or without a long M3 bolt to transfer the click action into a secondary linear or rotary motion. Use the case with holes…
This is a super satisfying fidget with an even more satisfying mechanism Simply print out the 3 parts and assemble them and GET CLICKING!
My remix of the AMS button. I added back the angled part to make it easier to push, still accepts the PTFE tube to protect against wear.
First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…
Like the original model, it's printable without generated supports, though you can choose to enable supports to avoid sagging bridges. I printed with a brim, but the brim may not be necessary if you have good bed adhesion. After printing,…
I designed this print in place button as a challenge, to see what was a good way to do it with 3D printing. It turned out more fidgety than I thought :) The button prints in less than 30 min and its pretty addictive to play with. Have fun!
This fidget toy is based on a common toggle switch mechanism. Assembly requires no hardware. https://youtu.be/zfiyeE8l3-0 https://youtu.be/0txw6uiIqhg https://youtu.be/lhFLaZz_SOo Printing All parts can be printed without supports. Print…
Please refer to the main entry for complete descriptions and credits. The list of CRxxxx holders were split out from the main entry to facilitate search and download. Holder Label Capacity / Size 1x1 2x1 CR123A 4 8 CR2 5 10 CR927 24 46…
Different sizes and types of Basic Simple buttons for your needs. 100% Infill For strength 25mm, 20mm, 15mm, 12mm Holes are 2.5mm No supports
An easy to print snappy fidget toy. https://youtu.be/HrO0uZ5QgzI Printing All parts can be printed without supports. Add a brim if your printer has any difficulty with curling around sharp corners. The Button caps can be printer either…
cap for 12x12x7.3 mm button switch
This remix of the AMS button cover added back the angled part to make it easier to push, still accepts the PTFE tube to protect against wear. Smooth around the side. Adding a Bambu lab logo.
A small power button for the 2024 Mac mini M4. Just push the base gently into the fan slots. This keeps it attached without the need for tape or else. Commercial use is prohibited, this also includes the photos.
Notice! This is only compatible with original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the newer style of AMS feeding funnel that has a thicker press button.…
So the power button of our Apple TV Remote dropped out. Went to the Genius Bar to confront Apple with the bad design, but they said it was not repairable. A freaking button! Talk about being a super sustainable company! Anyway, I've made…
The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…
Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…
Minimal back button (M1, M2) replacements for the ROG Ally. They are designed to stay out of the way and only be pressed deliberately, as the original buttons can be quite bulky. Please lower your speed settings on the top as it contains…
Storage boxes for coin cell / button batteries Also included customizable Fusion360 parametric model (battery size & quantity) Printed on modified Ender 3 at 0.2mm height
My crocs broke. So I designed a repair kit to fix them. The design is based on the original part. Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Resolution: 0.15mm Infill: 50% Notes: About 10 minutes print time…
a small fidget button that is free for everyone to use or sell
Some simple shoulder buttons I found online.
here are some of the parts rotary encodors x3 PEC11H-4015F-S0016 Bourns Inc. | Sensors, Transducers | DigiKey push buttons x5 Amazon.com: ESUPPORT 12mm Black Waterproof Momentary Round Toggle Switch ON Off Reset Push Button Pack of 10 :…
List of buttons Geometric buttons : round , square, triangle and hexagon Japanese video games buttons : acorn, leaf, mushroom and star Dimensions of the stl file width : around 17 mm Height : 3 mm Thread Holes : 2 mm Print Settings…
This snappy fidget button is extremely satisfying and a pleasure to hold in your hand, and easy to print and assemble, the required force can be set in 9 steps, does not require any additional parts, just a few drops of lube to start…
The Snap Button works like the metal ones except it has to be sewed on instead of being crimped. For the first “assembly” you have to apply quite some force on the button. This ensures the safe fitting of the two parts. Prints well with…
I have not FDM printed this model yet, but did have good results with a ps3 button I did years ago. I SLA printed this model out of ABS-like Prusa Resin for a custom project I did and thought the base file I made might be handy for…
Fidget toy in the form of a simple button. The button springs back and provides tactile feedback and a clicking sound when pressed. The button consists of only 3 parts, which are easy to print and require no tools for assembly.…
Hi Friends, Today I have more of a mechanical model. I have been wanting to get back into the mechanical side of 3D Printing and away from the more free form designs. This is a remix of a file designed by the very popular 3D Printy. The…
*update 4/8/24: Added a version 2 and 3. Version 2 uses Chamfers instead of Fillets to make it a little easier to print. Version 3 is just a straight up box haha. I've also included a .STEP file for the box design without my logo, as well…
This is a magnetic button that takes about 30 minutes to an hour to print. YOU WILL NEED GLUE TO PUT THE CAP ON! (I recommend super glue, but I think any sort of glue would be fine.) I recommend neodymium magnets, but I think the cheap…
It's just a little button that kind of resembles a mechanical keyboard button. I'm still working on testing it so a fully tested version that is tweaked and fine tuned will be published once I have repaired my printer. UPDATED: Version…
Update February 20, 2024 Added new models that incorporates a printable spring. If desired, you can also have your button squeak with this noise maker . You don't have to get the 120 pack, but the size you'll need is 35mm in diameter.…
This update to the Mini Super Toggly Fidget Button uses a stronger central post and an optional external case for a 100% glue-free assembly! https://youtu.be/YYyJ1ec0tcE https://youtu.be/lhFLaZz_SOo Customization This update is compatible…
I removed the gap in the switch cap, so it's easy to print upside down.
Crown Celebration Collection 12 variants and 6 of them are customizable with age buttons! If you like it --> press like it :-) The inner diameter is 190mm which should fit to adults, for kids try 170mm. I added a test scale that you can…
Thissimple mod replaces the top part / lid of yesimjess' Paintbrush cleaner. I found the screw-mechanism quite timeconsuming. So I replaced it with a leaf spring and push button assembly. No additional hardware is needed for assembly. The…
Created for the keycap contest, this cap fits standard red Cherry MX switches. The design is based on the buttons found in the popular Portal franchise. The provided sleeve is optional and may not fit your specific keyboard (use the…
This is designed to guard against accidental button presses or knob knobbings. Mounts using the existing belt clip hold on the back and keeps the ability to mount the belt clip over top. Retains access to all functions and buttons of the…
Please refer to the main entry for complete descriptions and credits. The list of LRxx holders were split out from the main entry to facilitate search and download. The holders here are labelled with LRxx. If you prefer AGx label, please…
This mini version of the the Super Toggly Fidget Button also supports multiple toggles and expressive buttons. https://youtu.be/YYyJ1ec0tcE https://youtu.be/lhFLaZz_SOo Customization Before printing anything, decide if you are going to…
This is a case for button cell / coin cell batteries. It's a remix of the parametric Small-Battery Case by George F with various improvements: Slider rails Windows on the side to check how many batteries you still have A locking mechanism…
Don't you just hate it when you keep accidentally switching off your light pad? Fear no more, this power button cover will spare your frustrations! This can be printed in place, face down on the bed. Recommended layer height 0.2mm. Pro…
Having some pairs of Croc in heavy rotation, it is common to break the heel strap connector. So I tried most of the connectors already available, but found no one working to my expectation. Either you had to glue it or the clips were…
Hey there! Chances are, you're the proud new owner of the Pulsefire Saga or Pulsefire Saga Pro (or maybe even both!). We wanted to provide you with the STL and STP files for your mouse's out-of-box parts as well as some bonus shapes and…
The Latching Button Fidget Toy has a piston that can be pressed in. It remains hidden until the button is pressed. The button releases the piston and it snaps forward with a satisfyingly loud "click!" Simply, press the piston until it…
The Red Button - Now you can be the destroyer of worlds - Smash that button whenever you like, but please don't if you are the Officer on duty on 26 Sep 1983, at the Serpuhov-15 bunker near Moscow which houses the command center of the…
This is a super easy to print toggle switch that prints perfectly every time a always has a satisfying *click*
Jeff Geerling's Youtube video:
Place the dinosaur on the printing plate and the button upwards so that you get a nicer surface. Use organic support and no brim.
One of the triggers was broken on my PS4 controller, and I decided to 3D model some new ones instead of replacing them with generic replacements. These are flat replacement L2 and R2 buttons for the first gen PS4 controller (CUH-ZCT1).…
For my entry to the PrusaPrinters button contest, I decided that I would make my entry entirely within PrusaSlicer. Using the built-in shapes, I was able to make 7 different buttons featuring different holes, colors and even made one that…
The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…
