Lada 2105 carburator velocity stack for 1.5l engine
Velocity stack for a Lada carburator. I recommend ABS/ASA/CF NYLON for printing.
- Downloads
- 199
- Likes
- 23
- Rating
- 0
14 models
Velocity stack for a Lada carburator. I recommend ABS/ASA/CF NYLON for printing.
This is a 4mm nut driver for tuning Stihl HL94 carburator. I suggest to print the handle at 20% infill and the rod at 100% by "modify settings for overlaps" / infill 100% inside the support blocker(in Cura). Print Settings Printer Brand:…
Yamaha XT600E Secondary carb butterfly valve needs 7mm opening in primary carburator slide prior to it's opening. This tool is to make synchronization adjustment easier. Just slide this tool under the carburator slide, obviously flat side…
Needed some velocity stacks to fit inside the airfilters of my Volvo The old airfilters are opened up and a wachable cartidge is sandwiched between the 2 covers with the stacks inside.
This friction-fit carb cover prevents the prop wash from interfering with the mid-range breather hole on the Walbro HDA-246 Carburator of the GP76 RC gas engine. It helps to smooth out the midrange when tuning the engine. It was…
Main and idle jet container, infinite expandable! I printed the containers from red TPU and the top and bottom out of PET-G. Both materials are resistant to fuel. Mainjet container is for 6mm hexagonal jets and the idle container is for…
This is an adapter for a motorcycle airfilter. The airfilter we had was 35mm inner diameter and the new carburator had a 40mm outer diameter. So, I whipped up an adapter for this. You can customize it to your needs. Print Settings…
Stand Supporto Carburatore Dell'Orto Vespa 50 16.16
This is a DIY tool i made which can be used for carburator tuning/synch. Parts Used: 2x 63mm Vacuum Gauge (DO NOT use a pressure(+) gauge, strictly vacuum one is easier to read/use) I used 0 to -1 bar 1.6 class gauges. 2x ¼" female to…
This push button allows to pump gas intop the carburator while i cannot use finger to fill the carb when turning the propeller Modified : 05.10.2019 : added a support to store the push button on the plane Print Settings Printer: HK…
make sure to measure for best fit, no support needed , use tpu and clamp , Note: cut a Sulfar Dishwashing Sponge in a bit of a over size circle and squeeze into model with rough green side first , the model will secure it into place and…
This is a gasket made to be printed with 100% infill in flexible TPU filament, or cut out of a true gasket material. It is to be installed as the topmost gasket in a Hitachi carburetor for a first-generation Subaru Justy/Trendy. I don't…
Hallo, mein kleiner Bruder hat eine Sachs ZZ 125 Baujahr 2015, der Choke hat gehangen und die Maschine drehte immer auf 5000 Umdrehungen/Minute. Bei näherer Untersuchung hat die Choke Nadel wegen Dreck gehangen. Das war auf eine defekte…
I made this adapter to use modern synchronisation tester on my old /8 W114 Since the original testers are very rare but you can get newer ones today, i custom designed an adapter which fits on top of the carburator and also fits for the…