1 / 5
Mikuni / Sachs ZZ Carburator Choke Cable Bowden Seal Rubber — image 1
1 / 5

Mikuni / Sachs ZZ Carburator Choke Cable Bowden Seal Rubber

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Das ist das Gummi für den Choke Bautenzug von einem Mikuni Vergaser Choke Bowden Bowdentube

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
43
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Hallo, mein kleiner Bruder hat eine Sachs ZZ 125 Baujahr 2015, der Choke hat gehangen und die Maschine drehte immer auf 5000 Umdrehungen/Minute.  Bei näherer Untersuchung hat die Choke Nadel wegen Dreck gehangen. Das war auf eine defekte Schutzhülle - Schutzgummi zurückzuführen. Diese Hülle gibt es meiner Recherche nach nicht einzeln zu kaufen, so dass ich die einfach schnell selber gezeichnet habe und aus Geeetech TPU 95a Schwarz selber gedruckt habe. Ich bin mir Sicher, dass dieser Schutz auch bei anderen Motorrädern verbaut bei Suzuki  ist. Ich habe es mit Freecad 1.0.2 gezeichnet, die Datei habe ich angehangen. Viel Spaß damit. Bei Fragen gerne melden. Viel Spaß Dabei

Hello, my little brother has a Sachs ZZ 125 built in 2015. The choke was stuck and the engine always revved at 5000 rpm. Upon closer inspection, I found that the choke needle was stuck due to dirt. This was caused by a defective protective cover—protective rubber. According to my research, this cover is not available for purchase separately, so I quickly drew it myself and printed it from Geeetech TPU 95a Black. I am sure that this protective cover is also installed on other Suzuki motorcycles. I drew it with Freecad 1.0.2 and have attached the file. Have fun with it. If you have any questions, please let me know. Enjoy!

Translated with DeepL.com (free version)

Tags