14,900 models
A se of vacuum hose attachments of different shapes. There are 7 different nozzle shapes, each at three different angles. They are all repeated for all common hose sizes. Each size has an option of Outer Diameter measurement or Inner…
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
This is a brass brush nozzle scrubber with a bucket for Voron 2.4. It has 2 parts which connect together with standard 6x3 Voron magnets. Printed without support. Designed to fit 300mm Voron 2.4 but could be used in 250mm or 350mm Voron…
Pure OpenSCAD remix of the Russian Doll Maze Puzzle Box by RevK All credits go to Adrian Kennard www.me.uk Remixed from https://www.thingiverse.com/thing:2410748 Released under licensed under the Creative Commons - Attribution license…
Elephant is 14 cm long, 10 cm high, and 6 cm wide. Designed to Print with PLA Z=0,2 Suggest to set Bottom layers to 10 Some of them need a brim. See the picture. (I placed them on the left side.) It should look like: Set selective brim…
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
Labyrinth puzzle box Outside diameter is 44mm, and 122mm tall The inner space of the puzzle is 30mm wide and 107mm deep This model can be printed without supports EDIT: V1.1 The parts are oriented for printability and without supports.…
With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need to grip the…
This is deceivingly hard 8 piece durable puzzle box designed to be difficult to solve and simple to print. Any rigid material should work. However 2, 5mmX1mm circular MAGNETS ARE NEEDED. Other than that and a little glue it's ready to…
UPDATED: see the new and improved print here: https://www.prusaprinters.org/prints/103948-sliding-number-puzzles-print-in-place-15-puzzle These are my 3d printed version of the classic sliding 15 puzzle. I've also included a 3x3 8 piece…
This wiper has been superseded by a new revision with several improvements: Improved dimensions for precise fit A right side version Slim profile for unobstructed LED status bar visibility Improved silicone pad position allows wiping on…
There are 363 ways to fit the 16 pieces into the frame. Good for all ages. Hint: The solution is engraved in on the backside, so you can't lose the solution. :-) Enjoy your time! Print instructions Print at least from two colors.
No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…
Printer not dialled into a tee? Struggle with print-in-place hinges? Good news! A long-awaited update is available - the Puzzle of Evil 2.0 ! This updated version includes a simple hinge utilising a section of filament, and a switch to…
A ready-to-solve twisty puzzle box. No glue, no hardware, and no assembly! https://youtu.be/FJXxZtWEMqw https://youtu.be/qvjMhq8SCBg Printer Requirements This is not a difficult print, but it does require a fair amount of accuracy. All…
Ones assembled, the Death Star is locked and can only be disassembled with a trick: Spin it really fast! Size: 45mm - DO NOT scale - won't work well. Comment if you want another size or if it's too tight / loose :) Print takes about 3h,…
This is my 3D-printed version of the classic sliding 15 puzzle. I also included a smaller 3x3 8-piece puzzle along with a larger 5x5 24-piece puzzle. These are fully print in place, so the pieces all interlock straight off the printer.…
Here is my holder for my E3D V6 Nozzles. It is designed so that the nozzles can screw into the casing to keep them nice and secure. This case will also hold and M6x1 nozzles such as clones. Enjoy! Print instructions Print at 0.1mm layer…
This cartridge nozzle set includes three different nozzle designs for 1K cartridges , allowing clean and controlled application of adhesives and sealants. The nozzles screw directly onto the cartridge and cover a range of use cases — from…
With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need to grip the…
NO software modification are required if you have a K1C Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws. Now you can use whatever plate you want. I have included a brush mold…
Designed 3D puzzle of 9 parts. Two parts need support. i used organic and for enforces only (part 6 and part 8) Suggest to use brim for part 4
Insert holder for 7mm socket wrench ideal for unscrewing the printer nozzle…
This update to the Treasure Chest Puzzle Box is easier to print, assemble, and remix! Printing All parts can be printed without supports. Use a brim if you have bed adhesion or curling issues. Print the Axle with at least 50% infill. The…
A compact tool designed to clean caulk and silicone cartridge nozzles after use. The spiral tip helps remove leftover material inside the nozzle, preventing silicone or sealant from hardening and allowing repeated reuse. Simple,…
3 identicle parts that slide together in a satisfying way to create a cube. Once assembled it needs to be held and moved in a specific direction to seperate. clearance between the parts is around .3mm allowing for smooth movement without…
with this nozzle you get circular flow in the pool instead of just straight in. It helps to keep the pool clean.
The box is symmetrical. You can draw the path to the exit on one of the sides. See image for solution (see my board game collection : https://www.prusaprinters.org/social/38889-djedje_zr7/collections/72597 )
Used Poly.cam to scan two cats affectionately nuzzling each other sculpture. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans…
A small model I've customized to be cute and fun. The large blank space can be used to add custom text or a logo with the negative volume feature of PrusaSlicer. I usually print out a few with extra filament and carry them around so I can…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Os presento el Cali Nozzle , un archivo 3D pensado para poner a prueba nuestras máquinas y saber si están imprimiendo correctamente. No hace falta escalarlo, al tamaño real ya es suficiente para poder evaluar los aspectos más importantes…
Yet another set of vacuum nozzles for 35mm adapters (most common in Europe) as I couldn't find suitable models on Thingiverse. Number one is a " Desk Cleaner ", i.e. it was designed to remove dust from areas where a normal vacuum nozzle…
Remix of "Wave Puzzle 7" by ThinkingPegasis. ( https://www.thingiverse.com/thing:3739933 ) Changes and/or improvements over the original: Thicker pieces Pre-flipped a few of the tiles to not give the solver a hint based on the surface…
On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented (heat at 250 degrees for 5…
It's a box for your 3D printer nozzles. Specifically, it's made for E3D v6 compatible nozzles, like those used in the Prusa printers. It fits 14 nozzles, 2 each of: 0.25, 0.3, 0.35. 0.4, 0.5, 0.6, and 0.8 mm. (These are the sizes that…
Yet another puzzle maze. I figured I'd try my hand at making one. The “Cap” will need to be reoriented to sit on its top. Should be printable without supports. A solution pdf is attached. EDIT: I realized that the solution picture somehow…
This simple tool helps find the proper offset for your Cartographer probe in relation to your nozzle tip. Having a 2.6-3mm Z offset is critical for reliable operation of Cartographer Touch (nozzle probling). The Y offset ruler is just a…
Used to pull set / hardened caulk from a used nozzle. Simply remove the nozzle from the tube, wind the unblocker tool in and pull out the old caulk. Used to restart a tube with nozzle that hasn't been used in some time. Printed with 0.2mm…
🔥 Cover up that boring lighter! Always have a flame on hand with three different styles to match your vibe or your mood! TIL: The name Kanik comes from Greenlandic origin, and it means Blood. I used fuzzy skin on these models, and they…
Please Note: This Design is not being developed or maintained, and is now obsolete, please go for either the REDUX or the PRO DIY Steam Machine: REDUX DIY Steam Machine: PRO If anyone would like to support me and my work, please feel free…
nozzles and cap for caulk, sealant, glue cartridges ( thread ∅15mm p=2.5 )
Background As many of you have found, it is easier to swap MK4 Nextruder nozzles in-place rather than to disconnect and swap out the entire heater block. Problem In-Place Nozzle Swaps pose some amount of risk in that you have to hold onto…
Some months ago, my brother and his wife had their third baby. Obviously, as the coolest uncle ever, I had to give a spectacular gift to the little guy. So, I thought hard. Both parents are science fiction nerds. My initial idea was a…
V2 Design - Please leave comments with feedback how to improve the design! You may also like my other Design: Fishing Rod - Sharky - optimized for fishing while snorkeling or diving! → Also on MakerWorld with files for Bambustudio ←…
A challenge for your brain and your printer! As well as being a fun brain-teaser, you can use this file to benchmark tolerances on your printer. Included are two files with different tolerances. The original file is also included with…
Re-mix of the same concept from David - but with Clip-on mounting and it prints easier / lower warpage. Clip-on mounting Shroud Easy on / off without removing screws No supports needed Smooth bottom No airflow restriction only 3.6g /…
With this spray can attachment, the chain can be evenly sprayed on all sides. The attachment can be mounted onto standard spray heads and extension tubes. Inside the attachment, the liquid is distributed through channels to 6 nozzles .…
Buzz is a lifeguard at the Velocirapids water park and a real stickler for the rules. He clearly enjoys wielding the tiny bit of authority he has to the greatest degree possible.
Update: There's been a few iterations since this one with more focus on print-ability: Deconstructed Puzzle Cube (several options) Lament Configuration Puzzle Box (simplified) This Hellraiser themed puzzle box, The Lament Configuration or…
A tricky tower with a secret compartment and modular maze. https://youtu.be/VesEei_Eg8Y Printing No supports required Add a brim if curling or bed adhesion is an issue Requires accurate printing within +/- 0.2mm, or sanding may be needed.…
This is a Remix made in Bambu Slice from Bugman_140 's Barry Bear with Fuzzy Skin. These are Ready to Print Files, made in Bambu Studio ( Don't know yet if they work on different Machines, please tell me if you tried ). Files are Sliced…
Basically prints without support and brim, but I'd recommend a 5-10mm brim (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or…
Caulking Gun Nozzle Unblocker - without support
This original design puzzle box, with hidden latches, sliding panels, a mystery dial, and covered with runic symbology, is the perfect place to keep your most valuable keepsakes safe (from anyone without a hammer). It requires just the…
Ones assembled, the Cube is locked and can only be disassembled with a trick: Spin it really fast! Size: 35mm - DO NOT scale - won't work well. Comment if you want another size :) Print with: No supports Elephant foot compensation: 0.2mm…
ATTENTION!! Always keep in mind that the generate torque will slightly varies depending on the used filament brand. The original piece was printed with Prusament PETG Galaxy Black, so a filament with similar or better quality should…
This compact and efficient cleaning nozzle (drain jetting nozzle) is designed for use with standard Gardena connectors. Perfect for cleaning gutters, channels and narrow drains. Fair word of warning: don't plug on a hose and turn on the…
A ready-to-solve twisty puzzle box. No glue, no hardware, and no assembly! Update (Sept 27th 2023) The “Print-in-Place Difficult.3mf” file has been updated to fix an internal collision with the core. https://youtu.be/FJXxZtWEMqw…
🦎 Tom the Lizard – The Ultimate Dashboard Drama Queen! 😂 SOMEBODY HIT THE BRAKES!!! 🚗💨 Meet Tom, the world's most terrified passenger! With his eyes popping out, tongue flying, arms stretched wide, and mouth screaming for dear life, Tom…
Wichtig! Jegliche kommerzielle Nutzung meines Designs ohne mein Einverständnis ist untersagt!!! Der Abstreifer kann ab sofort bei der Firma Just Printing gekauft werden! Diese Abstreifer werden vakuumentgast und im…
Y'all know that FDM printers are not ideal for printing minis but hey, it's possible, and you can get pretty damn good prints if you tune it correctly. Main things I've noticed made a difference were : Layer Height, of course The printing…
V1.1 V1.1 has some minor updates based on some feedback. All models have been tweaked to ensure there's plenty of clearance for the build plate, there have been reports that some users find that the wiper pushes up the corner of the build…
Stack all 12 hexagones and connect them with 13 pins (dowels). This requires a lot o thinking! . Each hexagon is different, and to win every hole on every slice has to be filled with a dowel. Great for kids, however, just as appealing for…
Tutorial I've made a detailed tutorial on how to design such a puzzle that you can find HERE ! Description These puzzles are a great way to spend some time and learn a bit of geography! Additionally the 3D texture makes them accessible to…
A print-in-place puzzle box with a mysterious hexagon glyphs! https://youtu.be/MZP2tb3nzbc Customization The project comes in a multi-color and single-color variants. Both versions work the same way, the multicolor option just makes it…
designed in fussion there are holes to hang them on keychain, pendant or everywhere else. I include 3 profiles. 3 colors, 2 colors, single color. The multicolor prints are printed in one plate with by object print sequence. The single…
This is a Nozzle Wiper Arm with Purge Bin for the Prusa CORE One /+ that uses Bambu Lab A1 silicone nozzle wiper pads. It's available for both left- and right-side mounting. This is version 2 , an iteration of the popular version 1 , and…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
Are you looking for an unusual gift idea? Or a unique toy for someone special? Do you like solving puzzles? For a truly multi-functional object, 3DFabXYZ.com is proud to present our new line of 3D mazes. They can be used as a gift card…
Edit July 2nd 2022: uploaded new version without unneeded hole supports . I found several other snake toy models online but none of them lived up to my hopes and dreams. I wanted one that didn't require extra hardware and had a satisfying…
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
This Evil Puzzle will keep you busy for many many hours! Simply place the four puzzle pieces within the available space. Sounds pretty easy, doesn't it? With both an easy and a hard option, no matter your ability, you should find some…
A fun and challenging puzzle. It is not easy as seen. There are a few ways the solve this. Even if you try to keep the solution in mind, you will not succeed. That's why I'm adding the solution below :) Also, you can print the solution…
This is a holder for your HotEnds / Nozzle and spare Extruder, as well as some necessary screws/Mounts. The last of the top row holders is for a fully assembled Hotend/Nozzle with fan & silicone sock. Update 12/23/22: Added new version…
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
The Design Here's a set of 4 stylish Baubles. They have a diameter of approximately 60mm Let me know if you experience any issues and i can try to help Printing Please make sure the print bed is clean as adhesion is very important.…
MODEL DETAILS A clip-on nozzle holder compatible with the MK3 range of printers. Designed for RapidChange Revo Nozzles. A second model is provided with adjusted tolerances and alternate geometry for printing with flexible filaments.…
Key Trap Interlocking puzzle by Christoph Lohe Assemble the various pieces into the lock shape shown in the cover photo. The key is looped around the shackle so that they are permanently bound together, but can move freely against each…
nozzle for the Milwaukee 2724-20 M18 FUEL Blower there's one thicker one and one thinner one
Can you solve this 3d puzzle? It consists of 18 parts, so seems to be pretty easy. In original size each cube has an edge length of 8 mm (little smaller because of some tolerance), so the whole ball has a diameter of 8 cm. The last two…
Box for nozzle set AD5X optinal pause in print to add 4 x 8mm magnets
I changed the shape of the lid and the most outer maze.
MODEL DETAILS Modular, customisable nozzle holders for RapidChange Revo nozzles. Mounting options for different printers can be found on our Printables profile. Size Information: Each Revo Nozzle is engraved with its size. It can be found…
I've seen an interesting puzzle from Youtube ( https://www.youtube.com/watch?v=j6D1ie94y4M ) so this is it. Print 12 pieces of this to create one set of this puzzle. Category: Puzzles
Description: Recently, I’ve been working a lot with construction adhesive, and every time there was a problem with glue drying inside the nozzle. To solve this, I came up with the idea of making a simple tool that helps clean the nozzle…
A ready-to-solve twisty puzzle box. No glue, no hardware, no assembly, and more difficult than ever! https://youtu.be/qvjMhq8SCBg https://youtu.be/FJXxZtWEMqw Printer Requirements This is not a difficult print, but it does require a fair…
Stargate Puzzle This is an easy to print basic Stargate Themed puzzle. The parts concist of the main stargate frame (that can be printed in 3 colors if you prefer) and 23 pieces that fit within the frame. I printed my frame in Inland…
A high level puzzle box 70 moves to open, but only if you don't hit a blind end of the maze. Made in Burrtool, xmpuzzle file is included and contains the solves and the parts. I added a 0.15 offset between the maze parts and 0.2 between…
Akaki's Picnic is a series of small but tricky packing puzzles. Pack the pieces into the basket 🧺. The 17 different puzzles use the same basket. You can print a basket to go with each puzzle, or use one common basket. The goal of each…
Beefore you start This is an assembly kit that you have to make by printing separate parts and fitting them together. If you want to make it sturdy use some glue but in my experience, I did not need it. I will feature your prints on my…
We would like to create a new line of small flexi animals that are easy to print (print-in-place) and without supports. The number 26 is this cute bear grizzly 🐻, how does it look? 🐻 Toy, Keychain and Magnet version 🐻 | Print-in-place, No…
This Gridfinity compatible holder has one large space and three small spaces, in a 1x1 holder. It stands 12 units high. This fits a nozzle brush, an L-shaped wrench, and some nozzle cleaning pins perfectly, so I always have them handy…
REVISION HISTORY 2023-09-13: v1.02 - Added the option to create nozzles with wings 2023-09-11: v1.01 - Modified the code to allow customizing the skirt height , adding a needle and/or stem to the nozzle 2023-09-10: v1.0 Released…
With this holder for a cleaning brush, you can automate the cleaning system of the Ender 3 V3 KE and Ender 3 V3 SE before each print, achieving a perfect first layer. It's important to modify the startup GCODE according to the brush's…
I have made this model to get all instruments following with FF ADV5M PRO: side cutter, screwdriver, Allen wrenches, glue stick, grease, nozzle cleaning pin, extra hot-end/nozzle assembly and USB stick, also a place for the printable…
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
Simple Puzzle box I designed while learning to use Fusion360 *I have read the complaints of the not so tight tolerances. I will address that with a new version. Thank you for the ones that have enjoyed it so far.
Overview The Gridfinity box is intended to hold any M6 nozzles. There are options for stackable and non stackable and also options for internal or external magnets. Printing Instructions Print in low infill (5-15%) and high layer height…
