Search results: carcass

Sort order

253 models

P
PrintablesSaddamCZ

Customizable board game (Carcassonne) tile grids

My remix of a board game tile grid by garyacrowellsr with extended customization and minor bugfixes in the SCAD. Original version here: https://www.thingiverse.com/thing:25158 As is, the STL fits 45 mm Carcasonne tiles but can be easily…

Downloads
1,989
Likes
283
Rating
4.97
P
PrintablesHonex

CARCASSONE KARAK card dispensing tower

This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…

Downloads
1,059
Likes
136
Rating
4.9
P
PrintablesJan Vejtasa

Ultimate Karak & Carcassonne tile grid holder

Catacombs of Karak is a great game full of emotions. Sometimes these emotions turn into dangerous movements and can distort cards on the table. This 4x4 grid helps with that. And oh yeah, its **stackable** and **connectable** too! You can…

Downloads
731
Likes
92
Rating
5
P
PrintablesDianeC

Carcassonne Meeple Button

A simple fun Meeple button to sew for the Carcassonne lovers. The regular size is 25mm x 24.28mm x 2mm, then it is good for pants or jackets, actually even some fleece shirts too and bags/pockets with flaps. I've added a smaller size,…

Downloads
133
Likes
67
Rating
5
P
PrintablesFelixTeutsch

Everydays 042 – Stackable Carcassonne Meeple

Today’s design is a playful twist on a classic: a meeple inspired by the board game Carcassonne , redesigned to be stackable and balance-friendly . The proportions and geometry were adjusted so meeples can be stacked on top of each other…

Downloads
83
Likes
17
Rating
0
P
PrintablesCelta

Carcassonne: Hunters and Gatherers Insert

Are you tired of fumbling through bags and boxes during your "Carcassonne: Hunters & Gatherers" adventures? This meticulously designed 3D printable insert brings order to your game, making setup and teardown a breeze! Features…

Downloads
58
Likes
20
Rating
5
P
PrintablesAlCheMaker3D

Erweiterung 3 - Burgfräulein & Drache - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Downloads
56
Likes
7
Rating
5
P
PrintablesAlCheMaker3D

Erweiterung 10 - Manege frei - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Downloads
47
Likes
6
Rating
5
P
PrintablesAlCheMaker3D

Erweiterung 6 - Graf, König und Konsorten - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Downloads
46
Likes
8
Rating
5
P
PrintablesAlCheMaker3D

Erweiterung 8 - Brücken, Burgen und Basare - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Downloads
45
Likes
7
Rating
5
P
PrintablesAlCheMaker3D

Erweiterung 5 - Abtei und Bürgermeister - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Downloads
41
Likes
6
Rating
5
P
PrintablesAlCheMaker3D

Erweiterung 4 - Der Turm - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Downloads
38
Likes
8
Rating
5
P
PrintablesAlCheMaker3D

Erweiterung 7 - Das Katapult - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Downloads
37
Likes
7
Rating
5
P
PrintablesAlCheMaker3D

Erweiterung 9 - Schafe und Hügel - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Downloads
35
Likes
6
Rating
5
P
PrintablesTheJoi88

Carcassonne Ghost (duchové)

Carcassonne ghost grid. For new big card - you need only one for this card. next grid could be from original KARAK - tiles grid

Downloads
30
Likes
7
Rating
0
P
Printablesmegakadidlo

Carcassonne game insert (Expansion box compatible)

This game insert is designed for Carcassonne and fits perfectly into an expansion-size box with outer dimensions of 19 × 13.8 × 6.5 cm . The insert can store: Carcassonne base game Multiple expansions, including for example: Traders &…

Downloads
29
Likes
6
Rating
0
P
PrintablesHamry

CARCASSONE KARAK card dispensing tower - REmix

Věž upravena tak, aby spodní karty byly povysunuty o několik milimetrů a snadněji se vyndávaly. Další karty v pořadí se také automaticky povysunou. Víko lze použít původní od #Ctihy ( @Ctihy_2822890) . The tower has been modified so that…

Downloads
28
Likes
3
Rating
0
P

Carcassonne box inset

Carcassonne box inset for basic game and 1. (Inns and Cathedrals), 2. (Traders and Builders) and 5. (Abbey and Mayor) expansions. It is made to be compatible with Carcassonne grid tiles ( link ).

Downloads
28
Likes
5
Rating
0
P
PrintablesPavel Novák

Děti z Carcassonne - podložka pod kartičky / Children of Carcassonne - card mat

Jedná se o podložku pro hru Děti z Carcassonne, na kterou lze umisťovat kartičky. Jedna varianta je obyčejná, druhá nabízí možnost si přidat do hry pro zábavu, popřípadě pro hraní s dětmi, branky. Pozor, verze nejsou kompatibilní. K oběma…

Downloads
19
Likes
0
Rating
0
P
PrintablesPavel Novák

Děti z Carcassonne (Carcassonne Junior; Kids of Carcassonne, The)

Jedná se o jednoduše tisknutelné soubory. Lze je vytisknout bez podpěr a při standardním nastavení. Prototyp byl tištěn z PLA při 220°C/55°C (0,2mm speed).

Downloads
13
Likes
2
Rating
0
P
Printablestimqui

Carcassonne / Karak / Isle of Skye Tiles Grid

I had bad results (too tight & too small joints) with the other one's tiles grid… made my design. Easily snaps together with big L-shaped joints to grow the board in any direction as necessary. It helps when the board has to be shifted if…

Downloads
3,437
Likes
632
Rating
4.98
P
PrintablesKatarn

Carcassonne Meeples/Figures - Complete Set!

All Carcassonne figures available (including expansions) to replace the ones you have lost or to create full player sets to be able to play with more friends. The figures are separated into two large groups, those that belong exclusively…

Downloads
1,145
Likes
137
Rating
5
P
Printableskap42

Carcassonne Tile Tower

The Ultimate Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a version with…

Downloads
1,120
Likes
195
Rating
4.94
P
Printablesflow_241

Carcassonne storage and sorting boxes

Space-optimized the original thing ( Carcassonne Boxes by conlan89 - Thingiverse ) to fit more of these boxes in the box of the base game. Every box is designed to have the space needed by the parts + 3mm clearance. Also added some more…

Downloads
834
Likes
161
Rating
4.79
P
Printablesflow_241

Carcassonne Meeple Score Scoring Flags

Created some scoring flags for carcassonne meeples. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: DasFilament PETG/PLA Various Notes: Print with 1 perimeter to…

Downloads
831
Likes
149
Rating
5
P
PrintablesCtihy

Karak / Carcassonne 4x4 tiles grid / mřížka

U původní mřížky byly zámky na můj vkus až příliš volné, upravil jsem tedy přesnost zámků, těsnost políček pro dlaždice a trochu snížil výšku oddělujících křížků. Díky moc za původní model, který jsem jen lehce dotvořil ke své…

Downloads
792
Likes
78
Rating
5
P
PrintablesKaxna

Carcassonne/Karak tile grids and holder

My remix of https://www.printables.com/cs/model/29030-customizable-board-game-carcassonne-tile-grids Thinner - low material, still stable, faster print.

Downloads
740
Likes
72
Rating
4.82
P
Printableskap42

Double Carcassonne Tile Tower

The Ultimate Double Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a…

Downloads
688
Likes
78
Rating
4.83
P
Printablesolivvybee

Carcassonne Big Box (2021) Insert

This is a box insert for the white Carcassonne Big Box released in 2021 (sometimes called Big Box 2022, the White Big Box, Big Box 7, or Big Box v3.0). The main feature is the meeple storage, which fits all the meeples of each colour into…

Downloads
665
Likes
145
Rating
4.8
P
PrintablesJoão Jordão

Carcassonne 3D tiles

One day after work I got invited to a friend's house for a dinner and games night. It was then, that I discovered the Carcassonne tile game. At first, it seemed a lot like dominoes. However, it was hidden and not seen at first sight the…

Downloads
609
Likes
177
Rating
5
P
PrintablesMartin

Holder for Karak/Carcassone tiles grid

Holder for this model: https://www.printables.com/model/107941-karakcarcassone-tiles-grid Height is for 11pcs of grid. It is a minimalist holder for tile grid. I printed with PLA, 0.4mm nozzle, 0.2mm layer height.

Downloads
580
Likes
107
Rating
5
P
PrintablesKyle Katarn

Carcassonne Tile Dispenser SPLIT Tower (Remix)

I redesigned the split towers by "Tquacken" for the Carcassonne game tile dispensary and added couplings or fasteners to the ends to make it easier to assemble. Here you will only download the redesigned towers. View the original design…

Downloads
440
Likes
69
Rating
5
P
Printablesdaveh_dev

Carcassonne Magnetic Tile Grid and Box Organizer

I tried out a few of the other existing printable Carcassonne grids, and most of them worked great. But I wanted a version that would fit inside the game box. So I designed my own grid from scratch (though it's definitely inspired by some…

Downloads
427
Likes
91
Rating
4.8
P
PrintablesJoppe

Custom Carcassonne meeple set

Set of different shaped meeple for your Carcassonne boardgame mods or meeple replacement.

Downloads
403
Likes
41
Rating
5
P
PrintablesAngus L

Carcassone Meeple / Abbot replacement

This is the most dimentional / shape accurate possible Abbot and basic Meeple models, please use them responsible , do NOT USE THIS MODEL FOR PROFIT, also do not publish it as your's, I have no rights over the design , only did the model,…

Downloads
390
Likes
45
Rating
5
P
PrintablesSomeJW

Double Sided Carcassonne Meeple Scoring Flags

Feel free to buy me a pizza if you want. Contributions appreciated but never expected. Love the original flags but it bothered me that the numbers were backward for the opposite side so I created these flags with the score on both sides.

Downloads
380
Likes
75
Rating
5
P
PrintablesKarel

Carcassone - náhradní figurky

Náhradní figurky do hry Carcassone

Downloads
331
Likes
43
Rating
4.9
P
PrintablesCtihy

Držák mřížek / Grid holder - Karak / Carcassonne

Držák mřížek pro hru Karak / Carcassonne - kompatibilní je s touto mřížkou (pojme 16 kusů): https://www.printables.com/model/1150222-karak-carcassonne-4x4-tiles-grid-mrizka Tisknul jsem na MK3S+, 0.20 Quality, PLA silver.…

Downloads
318
Likes
28
Rating
5
P
Printables4noxx

Carcassonne Tower

Carcassonne Tower

Downloads
308
Likes
49
Rating
5
P
Printablesjanek

4x4 customizable Carcassonne tile grid

In the Carcassone is a game requiring players to build a custom map by laying tiles one next to another. This grid helps keeping the map in case of any "accident" - perfect for playing with children. The model is fully customizable (with…

Downloads
274
Likes
26
Rating
5
P
PrintablesLonelyCowboy

Customisable tile grid for tabletop games such as Carcassonne, Karak, Isle of Skye, Alhambra and many more...

Prelude I stumbled across OpenSCAD while looking at another tile grid design. It was a tool I hadn't come across before and it piqued my curiosity. This first design was intricate and complex and proved to be a steep learning curve. When…

Downloads
246
Likes
37
Rating
5
P
PrintablesVoxel3D_NL

Carcassone big box meeple organiser

Meeple and character box/organizer. This model organizes all meeples from the big box set up to 2 colors/teams. For the Carcassonne Big Box, you'll need 3 3D printed boxes for all 6 colors. You can now grab a box per 2 players and don't…

Downloads
234
Likes
44
Rating
5
P
PrintablesAndré

Nemesis Intruder Carcass Tokens

8 tokens are in the core game, so print 8 of these, I guess? I made them oval, as the human corpse models that came with the Kickstarter-edition. alien_head.stl is the first one. nemesis carcass.stl has a base that matches the space…

Downloads
222
Likes
24
Rating
5
P
PrintablesFabNera

Counting trays Carcassonne

[fr] Alvéoles pour comptage Carcassonne Ne perdez plus vos marques à cause d'un geste brusque. Positionnez votre carte de comptage de points entre le cadre et la structure alvéolée. Les deux pièces sont divisées en deux pour être…

Downloads
220
Likes
64
Rating
4
P
PrintablesShadowLink

Carcassonne Tile Grid Holder Tree

A "tree"-style holder for the excellent Carcassonne Tile Grids at https://www.thingiverse.com/thing:25158 It can probably hold about 30 of them (I have 28). We play with the base game, first expansion (Inns & Cathedrals), and second…

Downloads
218
Likes
44
Rating
5
P
PrintablesHankoTom

Carcassone/Karak Card holder

This model is for the Carcassonne game. It is 4 merge tower for 320 cards (4 x 80), dimension of card: 45 x 45 mm. Overall dimensions are cca 200 x 200 x 60 mm. I modified the model, for supportless print

Downloads
216
Likes
32
Rating
5
P
PrintablesMaFy

Kids Carcassonne Meeple

Meeple for kids version of Carcassonne game - origin name My FIrst Carcassonne

Downloads
212
Likes
18
Rating
5
P
PrintablesWurflie

Carcassonne Insert for Big Box (V3.0) Content

This insert is made for the original Carcassonne base game box (V3.0) and will hold all the contents of the Carcassonne Big Box (V3.0). The original Carcassonne Big Box is much bigger than it needs to be and is a pain to carry around.…

Downloads
209
Likes
41
Rating
5
P
PrintablesCeasar

Carcassonne Meeples & Pope

Just a simpel model of the Meeples and Pope from Carcassone, the Meeple have been on a diet and is a tiny bit slimmer but is correct in rest measurements. Will add some variations for the fun of it with some hats and body styles. Print i…

Downloads
188
Likes
18
Rating
5
P
PrintablesAlice Jacka

Carcassonne Meeple

I traced this in OnShape from a picture. https://cad.onshape.com/documents/58c7322e8014ff54fe8fbf56/w/e5eb89e05b7b0418a7bc01da/e/bfa30cb4cbbe1b594eb95a32?renderMode=0&uiState=67878e365fb96b0b0e8a4d96 THIS DOES NOT APPLY TO THE STL ON…

Downloads
186
Likes
13
Rating
5
P
PrintablesDT

Locking Carcassonne tiles

I loved the tile set but the tiles can easily shift around and change board placement - especially when people add tiles. This adds some locking tabs to the sides to prevent the tiles from moving around. Thanks to Martin for the original…

Downloads
185
Likes
20
Rating
0
P

Carcassonne Castle

Custom 3d castle piece for the Bridges , Castles, & Bazaars expansion of Carcassonne. Includes a hole to place the meeple in the castle. Print 12 to have enough The original is a little fragile and tight-fit. Use the stronger carcassonne…

Downloads
165
Likes
16
Rating
5
P
PrintablesQuin

Carcassonne Game Piece

Print game pieces in your favorite color

Downloads
156
Likes
29
Rating
5
P
Printablesmarek štěpka

Carcassonne tile grid

This tile grid supports 45mm pieces and its connectible. Printed on Ender 3 V2 at 200°C from PLA.

Downloads
156
Likes
26
Rating
5
P
PrintablesMartin Dravecky

Carcassone & Karak tile grid

Grid for board games like Carcassone or Karak. Grid is 4x4, but snappable to smaller sections like 2x4 etc. Extending sections during game is simple even with tiles already in place. Shape is optimized for printing with 0.4mm nozzle and…

Downloads
144
Likes
17
Rating
5
P
Printablesrasmus

Carcasonne tile grid for Ghosts Castles and Cemeteries / Mist over Carcassonne

The tile grid from timqui have been modified to contain the large 2x2 tile for Ghosts Castles and Cemeteries / Mist over Carcassonne

Downloads
138
Likes
17
Rating
0
P
Printablesebarnes

Box for Carcassonne tiles (4x4) with tiles

Wanted to do the 4x4 grids and the box but the original box only did 3x3. I had to shrink the box and lid to fit my Prusa Bed and I break the box into separate parts so that I could do a multi material print but ended up just doing a…

Downloads
134
Likes
19
Rating
0
P
PrintablesAnordil

Carcassone 20th Anniversary box organizer

A set of organizers tailored for the 20th Anniversary edition of Carcassone. Features: - a box with a lid for the base tiles - a box with a lid for the river expansion - 5 boxes that fit on a frame for the meeples It all fits snuggly in…

Downloads
130
Likes
35
Rating
3
P

Carcassonne Card Box

Carcassonne game card organiser

Downloads
130
Likes
20
Rating
5
P
PrintablesMarc Bres

Carcassonne Boxes

I've been checking all the Carcassonne box organizers, but finally decided to design my own ones. I've created 3 boxes to store the base game which holds 24 tiles each, and then started creating boxes to store the expansions, getting the…

Downloads
128
Likes
44
Rating
5
P
PrintablesMaker_Me

Kartentürme für das Spiel Carcassone

Damit die Spielfeldkarten beim Carcassone spielbereit gelagert werden können stehen diese Türme mit Karten bei uns griffbereit im Regal.

Downloads
125
Likes
24
Rating
0
P
PrintablesSerathian

Carcassonne - Better Big Box + More!

Compact Carcassonne box that fits all the big box expansions plus more! There are two files for the main box available: STL file (With or without text) that fits the following: Base Game - The River - Inns & Cathedrals - Traders &…

Downloads
122
Likes
25
Rating
0
P
PrintablesPosix

Carcassonne 20th Anniversary river tile grid

This is a remix to hold the Carcassonne 20th Anniversary starting river tile, which is doubled in length. For printing, use the settings of the original model.

Downloads
115
Likes
23
Rating
0
P
PrintablesBulldogBite

Carcassonne 3x3 Tile Grid & Holder

There are already a lot of grid solutions for Carcassonne - but either I didnt like the design or I read about problems regarding the tolerances. The Grid: As I wanted to play Carcassonne and not for countless hours with my 3D printer I…

Downloads
115
Likes
7
Rating
5
P
Printablesplachytomas.cz

Top Cover for Karak/carcassonne card holder

Top cover for textured card holder from https://www.printables.com/cs/model/100702-karakcarcassonne-card-holder 0.2 layer, printed from PLA

Downloads
108
Likes
15
Rating
5
P
Printablesbernieke

Carcassonne Tile Grid Holder

Not a remix as such, but an accessory to store the grids in. Holds up to 18 grids. I've also included the freecad file, so if so desired you can easily make this taller or shorter by adjusting the length of the padding of the legs.…

Downloads
106
Likes
33
Rating
5
P
PrintablesLa Robottega

Meeple Box for Carcassonne

A simple Meeple box, with the right dimensions to house the eight base meeples per player you need to play Carcassonne! I suggest you to print them in clear plastic, 0.3 layer height. Very classy. Otherwise you'll need as much filament…

Downloads
105
Likes
32
Rating
5
P
PrintablesriksuFIN

Carcassonne Organization System

So, I have Carcassonne board game (Big Box version, which is base game and most of small expansions), which came in nice, big box and okay-ish slots for organizing… Well, most stuff.. And absolutely no room for any seperately-bought…

Downloads
95
Likes
25
Rating
0
P
PrintablesLukynovoCZ
Downloads
92
Likes
13
Rating
5
P
PrintablesMKT-007

Carcassonne Pieces

If you have lost a Carcassonne piece, or just want a new color, look no farther! If you like this, check out some of my other designs here: https://www.printables.com/@BuckyKatt129 Happy printing!

Downloads
91
Likes
23
Rating
5
P
Printablesvhotspur

Karak/Carcassonne tile grid box

Simple box for Karak/Carcassonne tile grid. Model created for OpenSCAD, easily customizable for different height etc. Latest source at my GitHub repository: https://github.com/vhotspur/3d-things/tree/master/games The files are for the box…

Downloads
86
Likes
19
Rating
5
P
PrintablesBogdan Jadamus

Karak, Carcassonne - stojan, card stand

Stojan na karty her Karak a Carcassonne. Stojan je 14,7 cm vysoký ze se přesně na šířku do krabice rozšíření karaku. Karak and Carcassonne card rack. The stand is 14.7 cm high and is exactly the width of the karak expansion box.

Downloads
86
Likes
13
Rating
4.5
P
PrintablesRyCoFX

Carcassonne Tile Organizer

Before : After: Prints fine on a Prusa Mini. I suggest changing the filament colors 2 times to get outlines on the top and bottom. To save on filament and print time there is .3mf file that removes the bulk in the middle.

Downloads
83
Likes
25
Rating
0
P
Printablesemirikol1984

Carcassonne Meeple Keyring

Keyring with Carcassonne meeple form, designed to print with a flexible filament like ninjaflex or smart flex, designed as a gift to my wife. You can print it in a non flexible filament at your own risk, flex will help to improve ring…

Downloads
79
Likes
19
Rating
4
P
Printableskifreak

Carcassone Grid River double tile

The model is the same than the original (so, please follow the instructions in the trimqui post) except I remove a couple of dividers in the middle to works with the double tiles in the 20 Anniversary with the mini-expansion the River.

Downloads
77
Likes
9
Rating
0
P
PrintablesSen044

Carcassonne Big Box +

Całość mieści wersję Big box, pozostawiając miejsce na dodatkowe kafle.

Downloads
77
Likes
21
Rating
0
P
PrintablesTheJoi88

Carcassonne tower (ghost)

For ghost version you need 3 times 20pcs need to use organic support for tower carcassonne_cover_V2 - is more strong and with the text

Downloads
77
Likes
11
Rating
0
P
PrintablesM3D

Carcassonne Replacement Game Figures

Are you missing any game pieces for your beloved Carcassonne board game? This design offers a collection of replacement figures for many of the game's components. While it doesn’t yet include every piece, it's a great starting point for…

Downloads
76
Likes
15
Rating
4
P
PrintablesSimeon Kavander

carcassone boardgame figures

just needed another set of caracters in to the game and modeled these

Downloads
76
Likes
6
Rating
0

Meeple-shaped box | Compatible with Carcassonne

Store your meeples or other small accessories with this cute 2-piece meeple-shaped box! Great decoration for your desk or board game shelf too! Easily fits 10 meeples (more with some arranging) Need meeples? Check out the meeple board…

Downloads
75
Likes
22
Rating
0
P
Printableskap42

Carcassonne Farmer City Counters

When scoring the farmers at the end of Carcassonne it is easy to lose count of which cities you have scored. By using these meeples the scoring will be simpler, and more correct. For each city, you count, place one of the meeples on it.…

Downloads
71
Likes
19
Rating
0

Basic carcass of rural cottage in 1:160

THIS IS A WORK IN PROGRESS. A basic carcass of a rural cottage in 1:160 without window or door furniture which I find is best added printed on clear film. The dividers and floor can be added to separate the rooms if required ( for…

Downloads
71
Likes
5
Rating
0
P
PrintablesAlCheMaker3D

Grundspiel - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Downloads
69
Likes
11
Rating
0
P
Printables3DLYX

Carcassonne Tile dispenser

Took the tile holder, added some slots and a bank to make it as dispenser. You can now pull out the cards from beneath the stack in the dispenser. Features a counter on the backside and a lockable lid an top. Wich is optional of course.…

Downloads
69
Likes
23
Rating
0
P
PrintablesSte_98

Meeple Case Box - Carcassonne Big Box

Case box for all meeples in Carcassonne big box. You can use every color you want to print it. Dimensions: 71x70x29. Printed with PLA.

Downloads
67
Likes
19
Rating
3
P
PrintablesTweako

Carcassonne river tiles holder

Carcassonne river tiles holder Category: Toys & Games

Downloads
64
Likes
16
Rating
5
P
PrintablesMFBocka

Carcassonne / Karak / Isle of Skye card box

Simple box for Carcasonne cards with separator.

Downloads
63
Likes
11
Rating
0
P
Printablessomeoneonly

Carcassonne compact organiser/box

Fits the base game with river one expansion. Takes about 8 hours to print at 0.3mm layer height. I designed it to use as little material as possible but still be strong/thick enough to support it(hopefully). It can be easily carried to…

Downloads
63
Likes
20
Rating
5
P
PrintablesOGPattison

Magnetic Tiles | Karak, Carcassonne, Isle of Skye

This 3D-printed adapter is designed for board game tiles (45x45mm) like Karak, Carcassonne, Isle of Skye, providing a press-fit system for securely holding the tiles in place. It features slots for 8 neodymium magnets (2x2mm) that…

Downloads
62
Likes
11
Rating
0
P
Printablesbernieke

Dual Tile Tower with lid - Carcassonne

Joined two instances of the original tower (print up to the required height), and made a lid for it. The lid has sloping walls on the inside for a good friction fit. Print Settings Printer: p3steel Rafts: No Supports: No Resolution:…

Downloads
62
Likes
6
Rating
4.5
P
PrintablesFoxhill

Carcassonne booklet placeholder for Big Box

If you are like me, it has annoyed you that the booklets in the big box are not in a fixed place. This placeholder with the nice Carcassonne logo fixes that. And it adds a nice 3D-logo in the center of the Big Box. I have included a .svg…

Downloads
62
Likes
7
Rating
5
P
PrintablesUri Mikhli

Obelisk Meeple for Carcassone

The original obelisk https://www.myminifactory.com/object/3d-print-obelisk-in-ghent-belgium-17375 was too tall and broad, but I like how it looks. I scaled the height down to 30%Z and the X and Y scaled down to 55% So now its the right…

Downloads
62
Likes
8
Rating
0
P
PrintablesDavid V.

Carcassone - Guard Meeples

Figurka strážného do Carcassone duchové

Downloads
58
Likes
5
Rating
5
P
PrintablesKaxna

Carcassonne gold bricks box

Small organizer for large Carcassonne box. It's for golden bricks, bridges, witches and wizard. Nozzle: 0.6 Layer: 0.2 mm Perimeters : 3 Material : PLA or PETG

Downloads
57
Likes
10
Rating
0
P
Printableshoweln

Carcassonne Magnetic Tile Grid (thicker with additional magnets)

Due to the conversion from stl to an editable file, the size scalled up by 10x. So printing will need to be scaled down to 10% to be the same size as the original grid. The file name lists scale 10.1, this % will produce a slightly larger…

Downloads
56
Likes
10
Rating
0
P
PrintablesKaa

Carcassonne Big Box 6 - small storage

This is a box to hold all the content from the Carcasonne Big Box 6. All expansions have their own slot, and everything fits easily. This box is much smaller then the original one, and because the height is limited you can move the game…

Downloads
54
Likes
5
Rating
0
P
PrintablesAlCheMaker3D

Erweiterung 2 - Händler und Baumeister - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Downloads
52
Likes
6
Rating
0
P
PrintablesD.L.

Carcassonne Tile Holder

This print is intended to provide storage while also allowing tiles to be easily distributed to players. Printed in PLA, fits inside original game box.

Downloads
52
Likes
15
Rating
5
P
PrintablesPlasticNinjas

Carcassonne: hunters and gatherers insert

Органайзер для новой версии (дизайна) игры Каркассон: Охотники и собиратели. ATTENTION: the organizer was designed for the INTERNAL dimensions of the box 188* 271 (Russian version of the game). Measure your box before printing, there is a…

Downloads
52
Likes
16
Rating
0
P
PrintablesP Reardon

Carcassonne Magnetic Organsiser 3x3

I have seen many similar variants on here but they were all 4x4 grids which my printer was unfortunately too small to print Magnet holes are for 2x1mm magnets ( FINDMAG 50 Pcs 2 mm x 1 mm Mini Magnets, Fridge Magnets, Small Craft Magnets,…

Downloads
51
Likes
14
Rating
5