435 models
Ein einfacher Eiskratzer der jedes Eis bricht :-) A simple ice scraper that breaks any ice :-)
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
SHIP ABANDONED ICEBREAKER LOD LEDOBOREC
Print approx. €2.41–€2.95 excl. taxPreliminary estimate for one variant
peg remixed to hold posters etc… Hookbit almost everywhere! lite version weighting only 3 grams available here: https://www.printables.com/model/1395752-v2-lite-of-noticeboard-extension-hook-only-3-grams
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
I created an Icebear Maddog Fork Light Bar mount for my 2016 Icebear 150cc motorcycle. I based this on the 2016 Icebear Maddog but it more than likely fits all the other ones because the Maddog design has been around since the early…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for one variant
Introduction This is a simple PC mainboard frame/tray system intended for open-air or custom enclosure PC builds. The intent is to support a broad variety of mainboards from iTX to so-called EATX with modules that fasten together with M4…
Spacebar keycap made to work with cherry mx switches and a light-up keyboard. Edit: I've added files for a version with a flat top, meaning it will be a lot easier to print, especially with MMU. I've also edited the design to be a bit…
Check the difference section at the bottom for feature list! I really liked the original model. Thanks FreddyZ! I started just wanting to make it easier to print, but feature creep got to me. But the result is good, and it was a good…
Nyan Cat Spacebar Keycap for Cherry MX. Customization The current spacebar model should work fine for most cases. However, the design model has been included as a separate STL for those wishing to make your own custom versions. The…
This may be the lowest-quality model of the most famous iceberg in existence! Remixed from a lower resolution Titanic + Iceberg model by yugimoto I used Fusion 360 to clean up some edges and finalize the size (I was printing a 125% RMS…
Now that the cold season is slowly beginning again, it is very helpful to have an icebreaker in your fleet. Even if few of you will bathe in the bathtub at these temperatures, you can at least use ICE to push the foam away. Let your…
Spaceballs Eagle 5 Flying RV
Optimized for easy printing. No supports Printer setup: Nozzle diameter 0,4 Layer height 0.2mm 100% infill Perimeters - 2
This is my first creation with FreeCAD, a screwable feeder with holes that allows the bait to come out. I am attaching the FreeCAD file in case any adjustments are needed. If you like my designs you can invite me to a coffee:…
Looks like the Rusty Bucket from Ben 10 but it's actually Eagle 5 from a Star Wars parody - Spaceballs! Check out my other stuff in my patreon page www.patreon.com/wekster and on my youtube www.youtube.com/wekster
Screw-top iceberg/crystal container in Pearl White PLA. Just a fun box for a stash or something. Almost seamless. Sharp!
Been working on a Dark Helmet costume and was not satisfied with the files I found online. Originally planned this as a remix, but had to toss the original model and build a new one. The mask for this model is heavily based on a the paper…
Spaceballs, The License Plate Frame, two piece version and two piece with small lip to fit around the places. Fits on regular 230x230mm build plate of Ender 3.
Can you believe Spaceballs is 35 years old?!? And it's still all about merchandising! So here's Spaceballs the Coaster! Happy Printing!
Base spacebar to make your own :)
Just a bit of fun Scale it to yourself Probably just needs a hard hat liner Category: 3D Printing
Niceberg TPU squishy. If you like this model give it a heart! (If printed in TPU it will actually squish!) Designed to be like the real thing when printed in flexi fillement! Based on the popular squishy toys Needohs!
Start into the Year of the Dragon by decoration your mechanical keyboard with these Dragon Keycaps . The keycaps are a replacement for the ESC-key and the spacebar. They fit on Cherry switches and have an OEM profile. I have tested the…
Spaceballs, the Mel Brooks classic take on Star Wars. Print Settings Printer: Fusion3D Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Category: Signs & Logos
A rendition of the Lonestar Spaceballs Schwartz Ring.
I know, used keyboards are disgusting to take pics of, but its needed to get the idea of the print. Anyways, I redrew and extruded out the original design graphics so that the key can be used for multi-color and printed face down. I used…
"It's... the Borealis ?" "Good god." "What? The Borealis? It's real?" Well it sure is now. More exactly the version seen in Half Life 2 Episode 2, which is heavily based on the USCGC Healy icebreaker instead of the Polar-class ones. I…
SpaceBalls :We Ain't Found $hi+ A free sample from the MyClub Spaceballs Little Army Men Collection
5.75U spacebar The Logitech Pro is a wonderful keyboard that is decently priced and beautiful. Unfortunately, in their infinite wisdom, Logitech made the bottom row of the keyboard have irregular sizes. As such, it's extremely difficult…
This is the Icon of Facebook Logo. The model size is 100x100x20 mm you can scale at whatever you want! It's only the design, waiting for printing it, use your desired printing settings. There are 3 files for diferent post printing…
Space keycap with pcb style Fusion 360 (education licence) T3D_design 2023
Some friends were doing an Alien themed party and wanted to use https://www.thingiverse.com/thing:1057666 , but I didn't want to print it all as one. I also like flipping these kinds of models on their back to keep support gunk hidden. So…
Replacement spacebar keycap for Corsair K95 RGB keyboard. Non standard size spacebar. Printed upside down with brim and supports in both PLA and PC.
A simple to print iceberg crystal. Great for dioramas and DnD games or for testing your printer. Prefered print method is vase mode. I used PLA filamment. Happy printing!
SPACEBALLS THE BELT BUCKLE! Working on a costume for Dark Helmet and remade the belt buckle from various sources. I have also included my Blender file in case it is helpful for others who want to make edits. I have left the text and curve…
Print as you would on printers you own that have good success with details.
For use with a Dyson vacuum and spacebag vacuum bag storage. Make a solid connection when evacuating the air so you don't have to hold it like a gimp. Print instructions Print using a 3D printer.
kaelruland's original DSA files - https://www.thingiverse.com/thing:2172302
is my obsession with this 36 year old movie going to far? no. enjoy this! Category: Tools
With this model you can make snow or Iceballs with a hole for your sauna infusion. Drop some drops of aroma in the hole of the iceball and put in on the hot stones of your sauna. The iceball melted slowly and let the water and aroma…
Altough I CNC milled this part from aluminum, it might be useful or even work when 3D printed. Re-used the original mounting bracket and screws of the hoverboard chassis. Used the hub motors for a robot project in combination with VESC…
Spaceballs The Flamethrower, the kids love this one... PLEASE PLEASE PLEASE post a make with pictures if you make it. I do this because i like making others happy, your pictures make me happy. Thanks. All the parts are in the best…
Spaceball One from Spaceballs I really need to recreate the opening scene with this model in blender.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A buddy of mine bought some USB buck converter boards and was going to make an adapter cable and I had the idea of this box instead. It has one set of power poles in and 2 sets out, and then USB to power a PI, what have you. This box is…
This is a functional 3D-printed replacement or customization part for a keyboard, designed as a LEG0-compatible spacebar. Its unique structure allows LEG0 bricks to snap securely onto its surface, enabling creative, interchangeable…
I used a blank keyboard model to model a spacebar with keys so that your unnecessarily large keyboard can have even more keys! Fits Cherry MX style switches.
This is a simple, standalone enclosure designed for the RaceBox Micro. It is powered by a single 18650 battery cell, with charging and power management handled by a module like the one found here . Key Features: • LED Visibility: A hole…
Original file had a flat top. I attempted to round it off for my dainty thumbs so it's more like normal DSA profile. Category: Electronics
For the whole case you will need the following files from the original Star Wars design https://www.printables.com/model/483316-battlefleet-star-wars-rebels-vs-the-empire/ files: V2_battleship_STAR_WARS_case_bottom_1x.stl…
Spaceballs, the Mel Brooks classic take on Star Wars. Print Settings Printer: CR-10 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Category: Signs & Logos
Thanks logitech for making a spacebar with unusual sizing (5.75u lol) Modeled from scratch with my caliper and some eye measurement
Both layers are 0.8 mm (color change after 0.8)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A friend wanted a switch plate for a blower and a vacuum in his shop. He had no idea what he was in for. - Change from Black to silver/Grey @ 6.6mm - Supports required
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
he original space bar tends to have issues with its metal bar beneath as the connection clips bend and wear with time. So i had to make my own. It took some time to mensurę things correctly but it finalny works. Instalation: - Remove keys…
Here's one just for fun—a tribute to the great Mel Brooks. The size of the spring that I used was 7.5mm x 29.8mm. I just used what I had in my shop, so you will need to find them on Amazon. If you use a larger spring, you will need to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Easily printed in place. 80% to 100% infill required to make this float properly. Build plate supports only. Printed using light blue silk PLA.
Corrected version for the better seating. Still need some glue to avoid side skew when pressing hard
It is here, after your long search it is found. This print is very simple for Ludicrous Speed printing. Good luck and may the schwartz be with you.
This remix is something I wanted for my Voron 2.4's exhaust cover on my toolchanger upgrades. The intention is to make the wiring a little nicer with just the canbus routed down the back left 2020 extrusion internally. Fusion 360, step…
Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 This print uses 2 unique filaments Swap Instructions: Start with Black At layer #10 (2mm) swap to White for the rest.…
NASA Icebreaker car modified from American Car Foundry 50' 6" Boxcar in HO scale. For this model you will need to print the following amounts from the list. Decals are provided in a SVG and PNG with each showing the location of the decals…
Spaceballs, the Mel Brooks classic take on Star Wars. Print Settings Printer: CR-10 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Category: Signs & Logos
This keychain features an embedded NFC tag that connects to any URL you program it to. At layer, there is a print pause where you need to insert the NFC tag before continuing the print. The recess is designed for tags that are 25mm in…
Diagonal brace for the Ender 3 Clears stock components You will need: 1x 480mm M10 Threaded Rod (Measure before you cut!!!!) 2x M10 Cap-nut 5x M4x10 (Hex head) 5x M4 T-nuts 1x M5x20 (Hex head) M5 Tap With a glass bed I still get full…
Toujours à la recherche d'une lampe où la lumière joue avec les contrastes sur la surface de son abat jour. Celui-ci me fait penser à un iceberg et je lui ai donné ce nom. Pour le socle, j'ai joué la simplicité, cependant ses faces…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Designed for generic 5.8L ricebox with bottom size 195x97mm. Combined dessicant container and spool holder, and fully printable with no need for any other hardware. Just print and use. Despite the shrinkage of the material, it is better…
Spaceballs, the Mel Brooks classic take on Star Wars. Print Settings Printer: Fusion3D Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Category: Signs & Logos
Print flat on bed with recommended Voron print settings; pair with DIN mount clip from Voron files. Use M2 to secure to DIN mount clip.
No Support needed Recommended Print Settings Material: PLA or PLA+ Nozzle: 0.4 mm Layer Height: 0.2 mm Wall Line Count: 2–3 Infill: 10–15% (Gyroid or Grid)
Backpack for V2.4 or Trident converted to a tool changer. Based around the BTT CEB and a Power distribution board. Intended to be mounted via VHB tape to the back panel. Stealthchanger logo added since I am basing my conversion around SC.…
A Benchy lost at sea! This time we can blame the ICEBERGS, first the Titanic, then poor aul Benchy! The crew was rescued thankfully by another Benchy. 2 Models: One model with the “Icebergs Ahead” sign, and the other model without. I'd…
Nothing is more relaxing than combing the desert when you are supposed to be working. Here it is, Spaceballs the zen garden. comb the desert and see if you can find Princess Vespa of the planet Druidia. Or maybe Barf the Mowg, half man,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A simple mount to stick on flat surfaces like a car dashboard. The RaceBox Micro slides into the mount with a snug friction fit. This is designed for the clear case that is provided with Kickstarter release of the RaceBox. Should print…
A cover to protect the LEP lens of Acebeam Terminator M1. Great for when you throw it in your pocket or bag.
Lens cover for Acebeam Terminator M1 that creates a bat signal. For the LEP side. The LEP must be fully (or at least mostly) zoomed out for the bat to show.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
SPACEBALLS THE HITCH COVER! YOGURT APPROVED MERCHANDISING! Printed in PETG at .25 Speed. Supports definitely needed.
The Feather Holder is a small attachment that clips onto the spacebar of the Razer BlackWidow keyboard. You can add this part on the most Razer keyboards.
The IP5328P can be installed facing up or upside down (see "ud" in the filename), which makes it slightly smaller. The version with the IP5328P facing upwards is easier to install overall, but please note the picture showing the cable…
I broke the clips for the metal support bar during dismantling and decided to design some replacement ones. May require a bit of heat to get the metal bar seated properly and moving fairly freely. Model might need a bit of tweaking for…
This is a tribute to one of the very best movies of all times: SPACEBALLS !!! And is even special after the news that a new movie is aired for 2027! It can (pun intended) hold 66mm cans. V2: improved the handle. Of course i don't have any…
For all of you who have been put in Facebook jail or know a few who have, here is a way to celebrate. Nothing special. Just PLA with a couple of color changes on Prusa i3.
Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 This print uses 2 unique filaments Swap Instructions: Start with Black At layer #10 (2mm) swap to White for the rest.…
Funny Sign - "I dont know if facebook has ever caused the lame to walk, But it sure has caused the Dumb to Speak!!"- dual colour design, printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection…
Hello everyone, I have designed a stranded Benchy, no idea how he could have missed the iceberg! I hope you like it.
Here is Number 2 of my Spaceballs Bobbleheads. Dark Helmet. I have cut it and did the dowels for a reason. You have trouble with the arms and hands if they are facing down. If the arms and hands face up, you don't need to rely on supports…
Originally posted here http://reddit.com/r/Art/comments/ekurqd/we_respect_your_privacy_3d_print_myself_2020/ By reddit.com/u/musketon Category: Sculptures
A remixed version of the iconic Benchy benchmark boat in which Benchy struck an iceberg! As more and more 3D printers allow printing with multiple colors, I thought Benchy deserved a remix for learning and testing multi color 3D printing.…
Small floater for fishing bait Recommended PLA - No more than 5% infill to ensure it floats
"Merchandising, merchandising, where the real money from the movie is made. Spaceballs-the T-shirt, Spaceballs-the Coloring Book, Spaceballs-the Lunch box, Spaceballs-the Breakfast Cereal, Spaceballs-the Flame Thrower." - Yogurt And now I…
Recreated the Spaceballs logo for more merchandising! If you like this, check out the nameplate: https://www.printables.com/model/1190568-nameplate-name-plate-name-plaque-holder-titles-for
Bear on Ice Tissue Box TOP with Sea Waves, no support needed to print, ready to print. Tissue look like Iceberg. Just print and stick on tissue box or just place on a table. On pictures top 1mm printed with Clear PETG, bottom with Blue.
![Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]](https://media.printables.com/media/prints/35720/images/1199286_159f781c-d9e2-4896-be13-5668e22d36a3/eatxv3.jpg)
![Benchy Wreck at Sea - Iceberg Edition [2 Models]](https://media.printables.com/media/prints/932ce9ff-7cdc-46f2-ba75-0e6c118137df/images/10497024_853f83d4-175f-403e-b027-6a5b4b316b05_ec30e906-1824-4586-9da0-2751adbae339/img_9260.jpg)
