408 models
A simple print to allow you to insert a small round hygrometer into the lid of a Chef's Path brand cereal container for use as a filament drybox. The insert fits inside the top lid seal (since you won't be pouring anything out from this…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Inspired by Michael Brill 's Kenwood Chef Blade Holder , I wanted to attempt to build my own version and take the opportunity to experiment/learn more of OpenSCAD. The first blade counting from the left is facing a different way from the…
Print approx. €5.60–€6.85 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €9.76–€11.93 excl. taxPreliminary estimate for PETGSource material: PET
This is a stand for the dicing discs / knife blades of a Kenwood Chef dicing attachment or food processor attachment. The stands can be plugged together. Update 12.03.2020 I split the part to avoid the support structure needed so far.
Print approx. €11.43–€13.96 excl. taxPreliminary estimate for one variant
A useful print to hold indicating desiccant. When the desiccant changes color and has absorbed all the water has held it needs to be dried out. This typically involves laying it out on a cookie sheet and putting it in the oven for a…
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for PETGSource material: PET
Say bonjour to tiny Chef Remy! 🐭👨🍳✨ Tiny model of Remy from Ratatouille. Handle with care - he’s so tiny, he might get ripped off the printing bed - added a brim setting that keeps this chef firmly in place. (The first attempt came off…
I DO NOT technically own the rights to the original character (Uzi in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE…
Halloween (2018) Replica Knife Based on the hero weapon from the movie Halloween (2018), a 8" J.A. Henckels International Chef's Knife, I have modeled a replica of Michael Myers' weapon of choice. Assembly I designed this with ease of…
I love my kitchen knives, Henckels, Wüsthof, Shun you name it, however, at the end of the day “there can be only ONE” (sorry I can't help myself)… ONE favorite knife, for me it's my Shun 8" DM0706 Damascus steel chef's knife. I only use…
The handles on the ice maker basket broke so my wife asked me if I would make a replacement. The original is overly complicated so some of the geometry is simplified, but it works just the same. Print with the basket standing up just like…
I DO NOT technically own the rights to the original character (N in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE buying…
It's a knife. Has two handles. One that is split, one that is not. In any case, it has to glue together.
Chef hat screwable on my cute mini octopus remix ! Here is the link to the octopus remix : https://www.printables.com/fr/model/334508-modular-cute-mini-octopus-to-ad-differents-types-o Add supports for print but check if there are…
This playful knife set is designed for little chefs who love to pretend they're cooking up a storm. It includes three classic knife types: a Santoku knife, a bread knife, and a small paring knife—each modeled to look realistic but totally…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D This octopus isn’t just cooking up food – he’s cooking up vibes. 🐙🔥 Meet the Octochef – an articulated octopus with a flair for the kitchen…
Needed a chef's knife for a Halloween decoration and wasn't happy with what was available. Scale as needed. The tip widens slightly to make it a little safer but please be careful especially with children! It can be printed in pieces and…
This is a replacement cap for the Chef's Path Airtight 135.2 oz. Cereal Storage Container that will allow the addition of a Hygrometer and a PC4-M6 or PC4-M10 Pneumatic Fitting. to make a Filament Dry Box Container. The hole for the…
Kenwood Cooking Chef Mix Tool Stand This is a stand for the mixing tools of the Kenwood Cooking Chef. We need to organize all the tools of this great food processor. So i decided to create a stand for all the mixing tools and the spanner.…
Note: I accidentally had two ⅔ marks on the outer ring in the original model. That has since been corrected but I haven't had a chance to print out a replacement, so the pictures still have the typo How to use Pick a measurement disk with…
Simple chef’s hat in two sizes. The play chef’s hat can be adjusted to fit any doll or character they have. The life-size one should fit a small child or look realistic.
A friend needed replacement cubes for their kids' kitchen playset, so I figured while I was at it I'd model an appropriate cube tray. It's a very easy support-free print at whatever settings you feel are appropriate. The cubes look very…
This is a set of pieces that can be used to recreate the Chef figure at 500% scale. This figure was introduced as part of the Main Street set released in 1980 and appeared in 3 more sets between 1982 - 2003. All of the stl files needed to…
Takové ocenění pro každého kdo umí dobře vařit tak jako ve slavné soutěži master chef :) Dole pod nápisem master chef je místo pro štítek kde si můžete napsat jméno obdarovaného. Print instructions výplň 10% výška vrstvy 0.10 detail…
I DO NOT technically own the rights to the original character (Doll in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE…
I DO NOT technically own the rights to the original character (V in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE buying…
CAD > Freecad Printer > Artillery Genius Filament > Sunlu White PetG No cooling Rafts > Yes Infill > 15% Supports > No Plate adesion > 15 Brim Retraction > 5 mm, 15 mm/s Speed > Inside 60, walls 40, first layer 30 mm/s Temperature >…
Sometimes the accessories for the Kenwood Cooking Chef (XL) are screwed too tightly. These are then somewhat unwieldy and difficult to loosen. For this I have now created a remedy with which it is easy to loosen the parts. Print…
This rack holds up to 6 discs of the additional food processor attachment of Kennwood Cooking Chef XL. Hence my cutting discs just were thrown in a box, I wanted to keep them more organized and better accessible. This is a pretty big…
This model is compatible with the lego system.
A blade cover I initially made as part of a gift. I've removed the monogram from the stls but have included the 3mf file so you can put your own in.
I took the original Open SCAD file and modified it so the D shaft was rotated 90 degrees so the knob would line up with the original knob. The Open SCAD file has two options added. One to adjust the wall thickness of the shaft, and one to…
A tray / organizer for all your Genius Nicer Dicer Chef accessories. Took a whole day to print mine, but my printer ran out of filament, so on my photo the print isn't finished 100% :-). But it worked good enough, so I kept my failed one.…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is a 2 part Gridfinity holder for a 14inch (104cm) chef knife.
Adorno para colgar de Mickey Chef con soporte para colgar
I DO NOT technically own the rights to the original character (N in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE buying…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles Kirby inspired, Chef Kawasaki, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
space-saving holder for seven knife discs (Ø160mm)
Just glue 15x5x3 magnets to the back of the print and it works great! Included print file has a filament change if you want to have two colors.
Printed in two parts and glued together. The other half is the same part mirrored.
Make it easy to hold the bowl and get the dough scraped out. Fusion360 Editable files included.
Print with the top upside down. Use filament with a little flex like PETG or ABS so the knob just snaps into place. Scale to your needs
This model is compatible with the lego system.
These helpful bears are ready to assist in any baking, cooking, stirring, chopping, spicing, slicing or dicing you need! I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
A simple solution to keep those lovely chef knives from getting damaged from drawer storage. Category: Kitchen & Dining
The retaining nut on my Chefs Choice food slicer broke. I originally tried (for 3 years) to get a new part from the manufacturer with no success. I was about ready to send it to the landfill. I then purchased a 3d Printer and found the…
Chef's knifes holder in gridfinity format to hold up to 4 - 250mm blade-long knifes. Takes a 8x2 gridfinity footprint
Whisk, Beater and dough hook holder. The tool holders have a diameter of 13mm.
I DO NOT technically own the rights to the original character (Tessa in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE…
Pasta / Dough Roller for Kenwood Cooking Chef 4x Hex Bolt M5x45 8x MR105 M5 Washers M5 Nuts M3x35 Bolts + Nuts Changeable rolls with 2 diameters, should be printed with a food-safe filament, I used PETG for everything, PLC should be fine,…
Replacement foot for Kenwood Chef food mixer. With through hole for metal pin to fix foot to mixer (alternatively just glue in place).
I bought toy vegetables for by 2,3 yo twins, but there was only one knife, so I made this model and printed two toy knifes so they both have the same toy knifes to cut these toy vegetables. I tried to make this model as safe as possible,…
I misplaced the blade fastening screw for my Chef's Choice 615 Electric Meat Slicer. I made a replacement part to match based on measurements (I did not have the original part to compare to). So this is not a 100% exact match but it…
This is a protective sheath for your Huusk knife. Once printed, you insert the blade into the sheath and the attached cylinder will pop into the finger hole on the knife. To remove, you simply push the cylinder out of the knife and the…
Objects should import in correct print orientation. Ensure the build plate has cooled before attempting removal - you do no want to put any bend in the blades. Glue the knife halves together and screw into the handle. Ensure they are…
I have more than the standard accessory which where included in the basic Nicer Dicer Chef set. So I need a bigger organizer.
This model is compatible with the lego system.
Bring a bit of kitchen whimsy to your keychain with this adorable, multi-material print keychain replica of the iconic Tupperware Super Chef! Perfect for fans of 90s nostalgia, chefs of all ages, or anyone who loves a touch of playful…
The Three Musketeers - Rochefort (Christopher Lee) - 1973 3D printable model.
General Info I am experimenting with exporting traditional polygonal models for 3D printing. I found an excellent otter model on Sketchfab that I wanted to share for others to print. I've added a base platform to the model because the…
Having purchased some Chef's Path containers to help store my open filament spools. I opted to add some colour changing silica gel beads into each container to help ensure moisture wasn't going to be a problem. However, using the…
Is for MIYABI ARTISAN 6000MCT series 8-INCH, CHEF'S KNIFE Sheath
A holder to store the disk blades of the Kenwood Chef kitchen machine. Printed out of PLA in 6 hours.
Not much to say on this one. It's my quick and dirty take on the Masterchef trophy. I made it to surprise and thank a lady who generously invites several loose-end neighbours for Christmas dinner every year, and whom I know to be a huge…
Náhradní ovládací knoflík pro Tefal mixer. Originální se nám zlomil po týdnu používání. Tak kdybychom náhodou nebyli jediní :) EN: Replacement control knob for Tefal blender. The original one broke after a week of use. Just in case we…
This is a spool holder for the Chef's Path cereal container (https://www.amazon.com/gp/product/B081F6X2W2). I switched to these after Rubbermaid stopped making their transparent Zylar 21cup containers. You will need 4x 608 bearings. The…
The original knob broke, so I made a replacement as well as an alternate design which might last better. If you like my design, you can buy me a coffee !
Head chef of a renowned French restaurant
I DO NOT technically own the rights to the original character (Nori in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE…
Halterung für die Scheiben Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Notes: printed in pla Category: Kitchen & Dining
These helpful bears are ready to assist in any baking, cooking, stirring, chopping, spicing, slicing or dicing you need! I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
Update 2021-02-24: If you're looking for an 88mm height, take a look at Sharkoctopus's remix at https://www.thingiverse.com/thing:4754084 which locks the pieces to each other all the way up. Update 2020-09-23: francisesmodewhite found it…
Surprised no one else made it already so I made a simple replica. The trophy looks 3D printed already in the show with its vertical layers and translucent tip. The handle is thinner in this design as I incorporated more traditional knife…
Rock Tumbler | polishing machine for a Kenwood Chef kitchen machine. you need two 608zz ball bearings Print instructions Category: Hobby Summary Rock Tumbler | polishing machine for a Kenwood Chef kitchen machine. you need two 608zz ball…
Save money and print your own adjustable feet for Camp Chef stoves or any stoves with 1.25" legs. The nut press fits into the bottom of the leg and the screw adjusts the height. Recommend to print in ASA or ABS but PETG may work well. 25%…
NEW UPGRADE FOR THE ORIGINAL PRUSA I3 MK3 IS HERE TO CHANGE YOUR LIFE Follow the article: https://www.prusaprinters.org/new-upgrade-for-original-prusa-i3-mk3-is-here/ New features: Scrambled eggs preparation Soup stirring Dough roller…
Hi, my moms quick chef handle was broken. So i decided to draw a new one based on the original.
I bought the Kenwood and I needed a vertical disc holder. I designed this support that has the disks staggered to optimize space. The strange shape is to save time and material during printing, but in the end it also gives character to…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
The handle to my wife's Pampered Chef mini serving spatula cracked, so I designed a replacement. I printed with TPU, so it would be soft and comfortable, but there are fillets to help with comfort even if you use a harder plastic. I…
I really liked the compact design from overflow_7049. However, the newer version of the food processor has an adjustable cutting disc, which does not fit into the standard slots as the others. Furthermore, it is a bit “side” heavy due to…
I really liked the chef's slide rule created by tux2603 so much so that I printed it a half dozen times trying to get it perfect since it was for my wife. Everything about the original printed fine for me except those numbers on the top.…
Simple wall attachable holder for Kennwood Cooking Chef XL (and compatible) stirrers. Just use two screws to attach to wall.
There are many many food dehydrators on the market that are basically clones of the commercial chef model that this model is based on. Any food dehydrator with a 9-5/16" (233mm) inside diameter tray base will work. Print with the smaller…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Hell's Kitchen - Michelin Star Chef Gordon Ramsay - Since 2005 3D printable model.
My Tupperware Quick Chef stopped working, so i designed a new sturdier gear. Printed in 0.2mm layer, Prusa PETG Jet Black, 4 Perimeters, 40% infill with supports.
I recently got a 10" chef knife off of Amazon. It does not fit in my knife block so I decided to make a simple sheath for it.
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
I got tired of opening the shared utensil drawer at work and almost cutting myself with the big knife, so I was inspired by the printables challenge to solve the problem. Simple, quick 3d print. I used PLA use whatever you have on hand.…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Replacement Gear for Kenwood Chef blender Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 200 Infill: 50 Filament: Taulman Bridge Nylon Natural Notes: Print with large circle at the base and use…
A toy chef's knife based on the real thing. Scale to whatever size you are looking for. The “blade” has a full tang. Assemble by gluing the scales and pins to the tang. It's probably worth keeping it a color you can easily distinguish as…
printed at 100% fill + 0,1mm layer, 0,4mm extruder, PETG, print wiht base supports, works well
Replacement top cover for Kenwood Chef Major Classic. Beware: The tabs are fragile
The baskets that come with the ice makers break easily. This is thicker and more durable. I rebuilt it in Onshape so I could tweak the dimensions. Created in Onshape:…
