Search results: cill

Sort order

Counting matching models…

P
PrintablesChris D

Oscillating Triangle Sandpaper Holder

Oscillating Triangle Sandpaper Holder: This is a remix of a design I found on Thingiverse. However, I completely redrew it and added the following: Increased wall thickness/rigidity from 1mm to 3mm Made stackable with posts on lid and…

Print approx. €7.45–€9.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
212
Likes
27
Rating
4.75
P
PrintablesAnde

Multitool (oscillating tool) blades holder wallmount

Wall mount for multi-tool (or ocillating) tool blades holder. Should be pretty universal.

Print approx. €15.60–€19.06 excl. taxPreliminary estimate for one variant

Downloads
188
Likes
21
Rating
5
P
PrintablesGreg Jacobs

Oscillating Multi Tool Blade Holder For Wall Control

This is intended to be used with the DDD Wall Control System . TLDR: Your build plate should be: This model 1 x of the 2x0 Flat Left 1 x of the 2x0 Flat Right Multi tool blades are universal, so this will hold any blades you have,…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant

Downloads
148
Likes
29
Rating
0
P
PrintablesErl

Holder for Oscillating Multi-Tool blades

A quick and easy holder for the blades for oscillating multi-tools. Uses a shock cord to hold the blades in.

Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant

Downloads
143
Likes
28
Rating
4

Bauer Oscillating Tool Wall Mount

This is just a small modification of the tool hanger made by @Eightbit. All I did was expand it to about 70mm in width. It fits the oscillating tool made by Bauer but likely fits other tools that have a wider handle. No supports required.…

Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
18
Rating
0
P
PrintablesZdeněk

DSO138 Oscilloscope Box Case (Krabička na osciloskop)

Introduction This oscilloscope is sold either assembled or as a kit. Whatever the case, you might want to enclose it in a box. Original acrylic boxes were sold but I gave them a pass when they were available, and now I just printed my own…

Print approx. €5.40–€6.60 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
3
Rating
0
P

Oscillating fan

This fan has driven by a tiny DC motor, which includes a high ratio gearbox. A 3v power supply or two-AA battery pack can drive it. The mechanism is a classic rotary to linear design, modified to oscillate the fan back and forth around a…

Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
0
Rating
0
P
PrintablesCowlick09

Oscillating Fan Link

The oscillating links in both of my Holmes 18" Stand Fan HSF1810 fans broke. Reuse the fasteners original to the fan. Slide the nut into the slot and align with the screw hole before assembly. Don't overtighten the lower screw. My…

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2
Likes
1
Rating
0
P
PrintablesKomitadjie

Ridgid Oscillating Belt Sander 4" Dust Shroud

This is a two-part print that provides a close-fitting shroud to replace the stock shop-vac size 2.25" dust collection system with an intake for a 4" dust collector. It requires minor assembly (epoxy or thick super glue) and minor…

Downloads
1,027
Likes
104
Rating
5
P
PrintablesJohn L.

Oscillating Blade Storage Box

Got some the of the "on sale" oscillating blades at Home Depot and wanted a good way to store them. Made a couple of different ones for different brands. Got the pin model from…

Downloads
961
Likes
298
Rating
5
P
PrintablesAkum.cl

Simple quill pen - lapiz pluma sencilla

Adapter for Bic pencil with old style of pen to write Recommendations: Print with layer height 0.10mm Activate raft to avoid Glue both pieces together with craft glue Gcode is for MK3 printer, generic PLA and layer 0.10mm, brim 3mm…

Downloads
942
Likes
280
Rating
5
P
PrintablesOZRIDERS

Lotus flower earring cutter for polymer clay, cookies or crafts - Cortador en forma de arete flor de loto para arcilla polimerica, galletas o manualidades

Lotus flower earring cutter for polymer clay, cookies or crafts-Cortador en forma de arete flor de loto para arcilla polimerica, galletas o manualidades

Downloads
883
Likes
212
Rating
0
P
PrintablesDivideby0

Wall mount for DeWalt DCS356 Oscillating Tool

Wallmount for DeWalt DCS356 Oscillating tool

Downloads
798
Likes
130
Rating
5
P
Printableszack753

Packout oscillating multi tool blade tray

So you went to put away your new Milwaukee oscillating multi tool blades for your new Milwaukee oscillating multi tool in your new Milwaukee Packout modular storage bin, only to find out that the blades are longer than any of the…

Downloads
751
Likes
159
Rating
0
P
PrintablesAncillary

Ancillary Steam Frame Controller Strap Mod 5.0 (official)

(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…

Downloads
719
Likes
76
Rating
5
P
PrintablesOZRIDERS

Heart-shaped cutter for polymer clay, cookies or crafts - Cortador en forma de corazon para arcilla polimerica, galletas o manualidades

Heart-shaped cutter for polymer clay, cookies or crafts - Cortador en forma de corazon para arcilla polimerica, galletas o manualidades

Downloads
713
Likes
127
Rating
5
P
PrintablesMadeByJ

Packout divider, m18 oscillating tool

This divides and holds the Milwaukee M18 Fuel Oscillating tool model 2836-20 in a Packout Compact organizer. Designer with print in place springs to hold various size cutters on bottom half and sandpaper with mount in top half. Added…

Downloads
662
Likes
152
Rating
5
P
PrintablesOZRIDERS

Harry Potter cutters for polymer clay, cookies or crafts - Cortadores de Harry Potter para arcilla polimerica, galletas o manualidades

Harry Potter cutters for polymer clay, cookies or crafts - Cortadores de Harry Potter para arcilla polimerica, galletas o manualidades

Downloads
631
Likes
99
Rating
5
P
PrintablesOZRIDERS

Pet shaped cutter for polymer clay, cookies or crafts - Cortador en forma de mascotas para arcilla polimerica, galletas o manualidades

Pet shaped cutter for polymer clay, cookies or crafts - Cortador en forma de mascotas para arcilla polimerica, galletas o manualidades You can scale it according to your need Puedes escalarlo según tu necesidad

Downloads
589
Likes
141
Rating
5
P
PrintablesAncillary

Pimax Dream Air Ancillary Gasket (MAX FOV)

(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…

Downloads
567
Likes
23
Rating
4.5
P
PrintablesBlinkinlabs

Oscilliscope probe organizer

Tidy up your electronics bench, and keep your oscilloscope probes handy with this oscilloscope probe organizer. Designed to sit under a modern digital scope, this organizer features drawers for 4 probes. Slots in the door fronts allow the…

Downloads
532
Likes
94
Rating
4
P
Printablescptjellybeans

Ryobi Power Tool Pegboard Holders - Circular Saw, Oscillating Tool, Grinder

Standard pegboard (25.4mm) battery post style mounts for additional Ryobi Power Tools beyond what @theamzngq provided here , which is remixed from @AimeBuilder_329593's Universal Peg Board Peg System . Pegs are the version from…

Downloads
512
Likes
72
Rating
5
P
Printablesthree-spot

oscilloscope probe holder

oscilloscope probe holder Double sided tape is required for fix.

Downloads
497
Likes
70
Rating
4.86
P
PrintablesOZRIDERS

Leaf-shaped marker stamp for polymer clay, cookies or crafts - Sello marcador en forma de hoja para arcilla polimerica, galletas o manualidades

Leaf-shaped marker stamp for polymer clay, cookies or crafts - Sello marcador en forma de hoja para arcilla polimerica, galletas o manualidades Marker or stamp for use in polymer clay or cookie crafts, you can scale it to your need!…

Downloads
469
Likes
111
Rating
5
P
PrintablesLyrkan

Rugged case for ZT-703S / ZT-702S Oscilloscope/Multimeter

This is a remix with added inserts of the excellent parametric rugged box that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories. The two grids have to be glued in…

Downloads
434
Likes
84
Rating
5
P
PrintablesOZRIDERS

Marker cutter in the shape of Homer Simpson drinking beer for polymer clay, cookies or crafts - Cortador marcador en forma de Homero Simpson tomando cerveza para arcilla polimerica, galletas o manualidades

Marker cutter in the shape of Homer Simpson drinking beer for polymer clay, cookies or crafts - Cortador marcador en forma de Homero Simpson tomando cerveza para arcilla polimerica, galletas o manualidades Cutter and marker for use in…

Downloads
399
Likes
65
Rating
5
P
PrintablesAncillary

Ancillary Steam Frame Controller Strap Mod (WIP) UPDATE 4.0

New version using official cad data!!! (If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have…

Downloads
376
Likes
59
Rating
4.5
P
PrintablesLali

Marcille

A chibi model of Marcille, one of the leading characters in the manga/anime Dungeon Meshi , or Delicious in Dungeon . Two versions with different eye parts uploaded, one is blank and the other is modeled. Printing Tips (for default size)…

Downloads
373
Likes
111
Rating
5
P
PrintablesPrintingStuffs

Window blocker / Oscillo battant

Windows at my place do not have this nice feature of remaining locked half open. I have therefore designed this particular item which does the trick. Printing a bunch of these was way cheaper than having all the windows replaced (and…

Downloads
343
Likes
110
Rating
2.5
P
PrintablesYangorang

Blade Holder for Milwaukee Oscillating Multi-Tool Wall Control Pegboard Mount

Hanger that I use to hang my multi-tool blades off of Wall Control pegboard using well nuts. There is a small recess for the well nuts such that the holder will be perfectly flush against the panels. The cross shape of the holder allows…

Downloads
337
Likes
61
Rating
4.75
P
Printablestlisek

Multiboard Makita Oscillating Multi-Tool Mount

Printed at 0.2mm layer, 3 walls, 40% gyroid infill for strength

Downloads
333
Likes
34
Rating
4.5
P
PrintablesThomllama

Oscillating Tool Blade Holder

very simple but wicked handy little bracket to hold blades and pads and such for many oscillating tools. (major inspiration from “yangorang” who has a nice design already, but only fits some of the blades, this should work with most if…

Downloads
323
Likes
42
Rating
3
P
PrintablesAlexY

Retro Oscillating Fan - Redux

Overview This is a mini retro-styled desk fan that has a functional oscillation mechanism. The design is a complete rework of my older oscillating fan model. It uses a common 130 size brushed hobby motor and incorporates an 18650 battery…

Downloads
320
Likes
324
Rating
5
P
Printableskmccon

Oscillating Steam (Air) Engine - 1941 Popular Mechanics Magazine

In April of 1941 Popular Science Magazine had an article on how to build an oscillating steam engine. This model is a reproduction of that engine using the part details in the article. I tried to stay true to the parts in almost all…

Downloads
316
Likes
40
Rating
0
P
PrintablesSubBass100

Dewalt Oscillating Multi-Tool Wall Mount V20 Max

Wall mount for a Dewalt DCS356B Oscillating Multi-Tool. Spacer included, just level and use 2 screws. Can be printed with PLA / PETG / ABS. I prefer PETG on this mount. Check out the oscillating blade wall mount holder here:…

Downloads
315
Likes
50
Rating
5
P
Printablesv3li

Oscilloscope FSCOPE-500K & DSO-500K

Krabička pro osciloskop FSCOPE-500K a DSO-500K https://oscilloscope.fhdm.xyz/

Downloads
314
Likes
19
Rating
5
P
Printableskvn5x4

Oscillating Tool Blade Storage - Gridfinity

12/9/2025 UPDATE Added variant that eliminated the built in storage bin and shifted post by 10 mm to allow for longer blades. Original Created this to easily store your oscillating multi-tool blades. Added a separate section to store the…

Downloads
303
Likes
47
Rating
0
P
PrintablesBrien

Oscilloscope Probe Holder

I have a 4 channel Oscilloscope and this helps me keep them out of the way. I print multiples of them and mount them side by side so I can hang multiple probes, hats, etc…

Downloads
271
Likes
35
Rating
5
P
PrintablesOZRIDERS

Kawaii avocado shaped cutter for polymer clay, cookies or crafts - Cortador en forma de aguacate kawaii para arcilla polimerica, galletas o manualidades

Kawaii avocado shaped cutter for polymer clay, cookies or crafts - Cortador en forma de aguacate kawaii para arcilla polimerica, galletas o manualidades

Downloads
270
Likes
76
Rating
0

DS213 Oscilloscope Rugged Box (+ Stand)

I wanted a box to store the DS213 pocket oscilloscope that had the same size & shape as my TS101's box. I also made a stand, this can fit under the probe tips, it prints in one piece mostly, but there are two small “cubes” that can be…

Downloads
257
Likes
59
Rating
5
P
PrintablesAdrián

Boton oscilador de ventilador (Oscillating Fan Knob)

Repuesto para el boton que hace oscilar el ventilador de pie con eje de 7mm de diametro. Oscillating fan replacement knob for pedestal fan with a 7 mm diameter shaft.

Downloads
247
Likes
13
Rating
5
P
PrintablesLali

Spell Casting Marcille

A chibi model of Marcille , a character in the anime Dungeon Meshi . Two versions with different eye parts uploaded, one is blank and the other is modeled. Printing Tips (for default size) It's supposed to be printed in 30 degree backward…

Downloads
235
Likes
72
Rating
5
P
Printablesdoragasu

Stackable Gridfinity Holder for Rigol PVP2150 Oscilloscope Probe

I have uploaded Revision 2. The first model is the yellow one in the photographs. Revision 2 is the red one in the photographs. It has additional structures to place the oscilloscope probe tools.

Downloads
234
Likes
44
Rating
4.88
P
PrintablesJH3D

Multi Tool Wandhalter (Oscillating tool)

Das ist ein Remix des Wandhalters https://www.thingiverse.com/thing:4916446 Ich habe die Länge auf 40mm angepasst. Der kleinere Halter hat eine Länge von 20mm. Die Dateien müssen auf 95% reduziert gedruckt werden, damit die Werkzeuge…

Downloads
230
Likes
37
Rating
4.5
P
PrintablesDanny Hermans

White Wagtail (Motacilla alba alba) bird house

There are a lot of bird houses already on Thingiverse, but none specifically for Motacilla alba alba (white wagtail in English, kwikstaart in Dutch) which needs a totally different entrance hole compared to the normal round ones - so I…

Downloads
229
Likes
53
Rating
0
P
Printablesarminth

Cover for ZOYI (ZOTEK) ZT-703S Oscilloscope ports

Not much to say else. Just print it no supports needed in any filament type you like. Choose between text and no text version. OpenSCAD File included as ususal. Have fun!

Downloads
222
Likes
29
Rating
5
P
PrintablesKlave

Clips to hold oscilloscope probes to side of scope

To hold my scope probes so they don't clutter my workspace I made a clip that fits to the left-hand side of my Hantek DSO2D15 oscilloscope. Can be used for other scopes too, it fits the Hantek's PP150B probe and the P6100 probes commonly…

Downloads
216
Likes
27
Rating
5
P
PrintablesSimon

Cover plate for KORG Nu:Tekt NTS-2 Oscilloscope

The oscilloscope is well made, but the screen is not well protected, being surface mounted on top of the unit. Bigger buttons are also nicer to press. You can fit a thin screen protector under the bezel for additional protection (I used…

Downloads
215
Likes
23
Rating
0
P
PrintablesOZRIDERS

Bear-shaped mold and cutter for cookies or polymer clay - Molde y Cortador en forma de oso para galletas o arcilla polimerica

Bear-shaped mold and cutter for cookies or polymer clay - Molde y Cortador en forma de oso para galletas o arcilla polimerica You can make a scale according to your need from your preferred laminator

Downloads
213
Likes
52
Rating
0
P
Printablesnoe919

Cortador Flor Arcilla (clay flower cutter

Cortador de 30 mm con corte central

Downloads
213
Likes
41
Rating
0
P
Printableskrazyderek

Ryobi 18v HP oscillating multitool wall mount

This is a stretched and cut up version to fit the Ryobi HP oscillating multitool. The tapered sides to save some filament and make the overhangs a bit less reliant on supports. Printed with Spectrum Sulfur Yellow PCTG (pictured) 0.6mm…

Downloads
211
Likes
28
Rating
5
P
PrintablesBaloo 3D

Clay stamp for playdough featuring Cub Scout symbols / Sellos para arcilla o masilla con simbolos de lobatos Scouts

Clay stamp for playdough featuring Cub Scout symbols / Sellos para arcilla o masilla con simbolos de lobatos Scouts

Downloads
211
Likes
45
Rating
0
P
PrintablesOZRIDERS

Long leaf-shaped marker stamp for polymer clay, cookies or crafts - Sello marcador en forma de hoja larga para arcilla polimerica, galletas o manualidades

Long leaf-shaped marker stamp for polymer clay, cookies or crafts - Sello marcador en forma de hoja larga para arcilla polimerica, galletas o manualidades Marker or stamp for use in polymer clay or cookie crafts, you can scale it to your…

Downloads
211
Likes
69
Rating
0
P
PrintablesOZRIDERS

Kwai whale shaped cutter for polymer clay, cookies or crafts - Cortador en forma de ballena kwai para arcilla polimerica, galletas o manualidades

Kwai whale shaped cutter for polymer clay, cookies or crafts - Cortador en forma de ballena kwai para arcilla polimerica, galletas o manualidades

Downloads
210
Likes
72
Rating
0
P
Printablesskarfacegc

Gridfinity Test Lead / Oscilloscope Probe stand

Enough room to hold two pairs of oscilloscope probes or larger test leads / multimeter leads. The two smaller holes hold smaller clips or test leads. Turned out better than I was expecting. Have been looking for a solution other than a…

Downloads
207
Likes
31
Rating
5
P
PrintablesOZRIDERS

Rabbit shape cutter for cookies or polymer clay - Cortador forma de conejo para galletas o arcilla polimérica

Rabbit shape cutter for cookies or polymer clay - Cortador forma de conejo para galletas o arcilla polimérica You can scale it to the need you have!

Downloads
206
Likes
50
Rating
0
P
PrintablesRod

Rigol Oscilloscope Cover

A travel cover for Rigol DHO8xx series of oscilloscopes. Designed-in support allow printing on any printer with a build volume ≥ 250mm x 250mm x 210mm, i.e. MK3S, Bambu X1C, P1S, etc. Many thanks to Slant 3D for the support tip that…

Downloads
205
Likes
18
Rating
4.5
P
PrintablesSteedMaker

Oscillation Sculpture Trophy

An abstract sculpture using simple torus shapes melded together and twisted into an oscillating shape. It could act as an artistic design, a trophy or award. This model was NOT created with any use of AI. It is designed to print without…

Downloads
200
Likes
55
Rating
4.5
P
PrintablesSubBass100

Oscillating Tool Multi Saw Blade Holder

This wall bin holds oscillating tool blades. you can fit many of them in here without issue for easy access. Print with any filament. Check out the Dewalt Oscillating Multi Tool wall mount here:…

Downloads
191
Likes
36
Rating
0

Clip for StarLock Oscillating Multi Tool Blades (Bosch etc.)

Clip for StarLock Oscillating Multi Tool Blades ☼ Variants for 2 - 6 blades capacity. ☼ For StarLock blades (Bosch / Fein / Festool / Makita / Shark etc.) ☼ Wall-mounting onto a nail or screw Orient the print as shown in the images, and…

Downloads
190
Likes
59
Rating
4.5
P
PrintablesPinnacle Prints

Dewalt DCS355 Oscillating Tool Hook - Multiboard

This is a multiboard holder for the Dewalt DCS355 oscillating tool. This is a remix of the drill holder for multiboard by @andrepadua, which is a really nice sturdy drill holder I use for my Dewalt drill and impact driver. I wanted to…

Downloads
190
Likes
22
Rating
5
P
Printablessuromark

Enclosure for DSO138 digital oscilloscope

An enclosure for the DSO138 oscilloscope with room for a 9V battery. Print Settings Printer: TronXY X5S Rafts: No Supports: Yes Resolution: 0.25 Infill: 15% Filament: Generic PLA Any Category: Electronics

Downloads
187
Likes
19
Rating
4.8

Oscillating Multi-Tool Blade Cases

I bought a bunch of oscillating multi-tool blades and found there were not a lot of options for holding a lot of blades in a compact case, so I designed one. There are three different spacers to help hold the blade end up so they don't…

Downloads
185
Likes
80
Rating
5
P
PrintablesMark.uofu

80mm Triangle Sandpaper Tray for Oscillating Tool

A tray to hold 80mm triangle sandpaper for oscillating tools. This version is remixed to 100mm in length for smaller collections. Included the divider tags for convivence though they have not been altered from original.

Downloads
180
Likes
21
Rating
0
P
Printablesjonnybergdahl

Oscilloscope Probe Holders

This is a holder for oscilloscope probes. I have them screwed to a shelf above my workplace. Fusion360 design file included for easy remixing.

Downloads
180
Likes
16
Rating
5
P
Printablespoprhythm

Makita Oscillating Multi-Tool mount for Wall Control

This uses the DDD Printable Wall Control System ( github ) to mount the tool. I've designed this using the Makita XMT03Z , but it may fit other similar oscillating tools. The mounting dimensions are 18.2mm wide and 6mm thick which support…

Downloads
179
Likes
19
Rating
5
P
PrintablesNullSense

Rigol DHO800 Oscilloscope Probe Holder

This custom-designed probe holder is made specifically for my Rigol DHO804 oscilloscope. It should work with any DHO800 series scope and possibly DHO900 series (need to verify). It provides a secure and convenient storage solution for…

Downloads
172
Likes
14
Rating
0
P
PrintablesOZRIDERS

Kwai rabbit shaped cutter for polymer clay, cookies or crafts - Cortador en forma de conejo kwai para arcilla polimerica, galletas o manualidades

Kwai rabbit shaped cutter for polymer clay, cookies or crafts - Cortador en forma de conejo kwai para arcilla polimerica, galletas o manualidades

Downloads
172
Likes
61
Rating
0
P
Printableszhollis21

Oscillating/Multitool Blade/Attachment Holder for Honeycomb Storage Wall

Oscillating/Multitool Blade/Attachment Holder for Honeycomb Storage Wall. Disclaimer : They fit my Milwaukee blade set and should fit most other blades, but I'm sure there are a couple that might not work with it. Leave a like and a make…

Downloads
169
Likes
49
Rating
4.75
P
PrintablesOZRIDERS

Mold and Cutter in the shape of a Buddha with lotus for cookies or polymer clay - Molde y Cortador en forma de buda con loto para galletas o arcilla polimerica

Mold and Cutter in the shape of a Buddha with lotus for cookies or polymer clay - Molde y Cortador en forma de buda con loto para galletas o arcilla polimerica You can make a scale according to your need from your preferred laminator

Downloads
168
Likes
36
Rating
0
P
PrintablesAdorgu

Marco sencillo

Simple frame to replace the original of a mirror that I had at home. The maximum dimensions of the mirror itself are 149mm x 203mm For the back cover I used a sheet of MDF.

Downloads
161
Likes
9
Rating
0
P
Printableskvn5x4

3-1/8" Oscillating Multitool Sandpaper - Gridfinity

Three variants based on how much you would like to store (3U, 6U, or 9U). Photo shown is a 3U. Model also includes finger cutouts to easily remove units as needed.

Downloads
159
Likes
24
Rating
5
P
Printablesthree-spot

oscilloscope probe clip holder

oscilloscope probe clip holder

Downloads
158
Likes
31
Rating
5
P
PrintablesStefan

DSO154Pro oscilloscope case

This is a case to cover the sides and back of the Zeeweii DSO154Pro portable oscilloscope. It's meant to be pressure-fit, so you may need to adjust dimensions by 0.1 or 0.2mm depending on your printer's tolerances. There's also a small…

Downloads
155
Likes
15
Rating
5
P
PrintablesOZRIDERS

Kawaii mango shaped cutter for polymer clay, cookies or crafts - Cortador en forma de mango kawaii para arcilla polimerica, galletas o manualidades

Kawaii mango shaped cutter for polymer clay, cookies or crafts - Cortador en forma de mango kawaii para arcilla polimerica, galletas o manualidades

Downloads
153
Likes
59
Rating
0
P
PrintablesKyleTW

Oscilloscope Probe Holder Clips

These probe holders are deisgned to hold oscilloscope probes in place for debugging and testing. Use with 1/4oz adhesive wheel weights to help keep them stable along with 9mm OD rubber bumpers. The source design files for SOLIDWORKS and…

Downloads
149
Likes
37
Rating
5
P
PrintablesMarcin

DSO152 FNIRSI oscilloscope box (120x200)

Many thanks for Yanev for making such a grat box! Hovewer, after trying to customize it to fit FNIRSI DSO152, it occured to me, that minimal height of the bottom and the lid are 15mm each, a little to much for that small oscilloscope. But…

Downloads
148
Likes
31
Rating
5
P
Printablesp1mrx

Sandpaper Adapter for Oscillating Multitool

This is an adapter for holding sandpaper with an oscillating multitool. I designed it for a DeWalt DCS356, but it may fit other brands/models with the same blade interface. The Everclamp grid with sqwasher plate and thumbscrews lets you…

Downloads
148
Likes
25
Rating
0
P
PrintablesOZRIDERS

Star-shaped marker and cutter for cookies or polymer clay - Marcador y cortador con forma de estrellas para galletas o arcilla polimerica

Star-shaped marker and cutter for cookies or polymer clay - Marcador y cortador con forma de estrellas para galletas o arcilla polimerica You can make a scale according to your need from your preferred laminator

Downloads
146
Likes
52
Rating
0
P
PrintablesDerKipo

Scoppy Oscilloscope Casing

Takes a raspberry pi pico on a breadboard (the standard small size ones, 35x45x10mm) in the back, standard 6mm banana-plugs in the front, and a phone up to 13 mm thick.

Downloads
145
Likes
11
Rating
0
P
PrintableschiptronCZ

Oscilloscope probe holder / Držák osciloskopických sond

Several models of oscilloscope probe holders. Version for gluing or screwing and the height of the holder is 12mm. The holder is designed for probes with a diameter of 10mm. ---------------------------- Několik modelů držáků…

Downloads
143
Likes
12
Rating
4
P
PrintablesJames Chadwick

Pack de Llaveros Sencillos

LLaveros Impresos en PLA con una impresora Ender 3, relleno 15%

Downloads
142
Likes
22
Rating
0
P
PrintablesIgnacio Vidal

Tuxedo Sam Pencill Top / topper / Adorno Lapiz

Hi, mi kid want to have a special school start this year so he ask me if I can make some pencil topper for him and his friends. So I decided to make a series of characters from models that can be remixed. This is a Tuxedo Sam . I've scale…

Downloads
134
Likes
21
Rating
0
P
PrintablesDub MFG

3.5in Oscillating Tool Pad Storage

3.5in Oscillating Tool Pad Storage, prints in about 2hr with .25mm layer heights on most printers (0.4 nozzle). Tilted at a 20deg angle, finger hole for access, and hidden fasteners.

Downloads
134
Likes
30
Rating
5
P

Oscillating blade box

A simple box to store and organize blades for a oscillating multi-tool/fein.

Downloads
134
Likes
24
Rating
0
P
PrintablesKeiEich

Dungeon Meshi Marcille's familiar cookie cutter

3 types of Marcille's familiar. Use the back of a toothpick to add eyes.

Downloads
133
Likes
27
Rating
5
P
PrintablesRyukyuD

Honeywell Oscillating Tower Fan Stand / Base

2mm walls with 7% grid infill were adequate to print this. I used 3x 30mm M5 socket head bolts, but the hardware required may vary depending on manufacturer/model: I've seen other models with the same bolt pattern use wood screws. The…

Downloads
130
Likes
12
Rating
0
P
Printablesxiphmont

Replacement Feet/Pads for Tektronix TDS 500/600/700 series oscilloscopes

Feet and rubber pad inserts, universal across the Tektronix TDS500/600/700 oscilloscope family and possibly other Tek equipment from related lines. This is a near-identical copy of the original with a few changes to take FDM printing into…

Downloads
127
Likes
4
Rating
4
P
PrintablesBubble O Bill

FNIRSI 1013D Oscilloscope Cover

Front screen cover for the FNIRSI 1013D Oscilloscope to protect the touch screen while in your backpack or tool bag. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15 Filament: PolyMaker PLA Notes:…

Downloads
126
Likes
12
Rating
0
P
Printablesken830

Rigol MSO5000 Series Oscilloscope VESA Mount

This is a VESA mount adapter for the Rigol MSO5000 series Oscilloscope. Mounting the scope above your work surface increases flexibility, frees up space, and puts the scope at eye-level. Tool-less mounting of the oscilloscope,…

Downloads
126
Likes
22
Rating
5
P
PrintablesOZRIDERS

Scandalous bear shaped cutter for polymer clay, cookies or crafts - Cortador en forma de oso escandaloso para arcilla polimerica, galletas o manualidades

Scandalous bear shaped cutter for polymer clay, cookies or crafts - Cortador en forma de oso escandaloso para arcilla polimerica, galletas o manualidades

Downloads
126
Likes
38
Rating
0
P
Printablesseanmurf

FNIRSI oscilloscope case (138-pro)

This case attaches with slightly longer bolts in the rear of the oscilloscope. Keeps all pcb layers, just added to rear and provides side covering. Much easier to use and hold now.

Downloads
120
Likes
5
Rating
5
P
PrintablesUilHurtUrself

Tektronix TDS Oscilloscope Feet

Printed in standard PLA with low layer height (0.8mm height took 1 hour) and 55% infill. Tight fit. Print two so they match!

Downloads
119
Likes
4
Rating
0
P
PrintablesKarlos

Knob for Rigol oscilloscope

Replacement knob for broken one on Rigol oscilloscope. 6mm shaft. Printed in white filament PM. Print instructions: Layer height 0,1mm, no supports.

Downloads
119
Likes
5
Rating
0
P
PrintablesEdward

earring Barbie / Zarcillos de Barbie

barbie B earring with color changebarbie B earring with color change

Downloads
116
Likes
53
Rating
0
P
PrintablesWes C

Stand for Continental Oscillating Pedestal Fan

As a beginner in modeling for functional parts, I was super proud of this print. My lovely daughter somehow broke the part that connects the legs of her standing fan. Glue didn’t work, so I thought I’d try my hand at modeling it. It…

Downloads
115
Likes
4
Rating
0

Rugged box for safe storage of multitool / oscillating saw blades

Rugged box for safe storage of multitool/oscillating saw blades.

Downloads
115
Likes
23
Rating
0
P
Printablescmpxchg

Oscilloscope probe tweezer 4mm

One-handed differential probe for two-channel oscilloscope with math function. With dual acupunture-needle handle holes for alternative or additional pins pointing to same probe tips center location. With adjustment screw, M3 hex nuts and…

Downloads
115
Likes
35
Rating
5
P
PrintablesGregMM

Rigol DS1054Z Oscilliscope Probe Holder (Under Shelf)

Printed in PETG Printed on its Side Uses #4 Screws to mount

Downloads
111
Likes
25
Rating
5