John McClane - Die Hard funko POP!
Print & acrylic draw
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
- Downloads
- 176
- Likes
- 50
- Rating
- 0
284 models
Print & acrylic draw
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
Sneaky Golum from Clash of Clans
Print approx. €19.78–€24.18 excl. taxPreliminary estimate for one variant
Archer Queen : Clash of Clans
Print approx. €16.34–€19.97 excl. taxPreliminary estimate for one variant
Update 2026.10.28: Added a "V2" folder to make the insert compatible with the "Underworld" expansion. The challenge is to fit the small fabric bag inside without adding a lid lift. Any ideas ? ^_^ Todo: Complete the documentation. For…
Dude from one of the best Christmas movies :) www.patreon.com/wekster
Warrior Cat. Riverclan Hawkfrost.
Scale print to your liking. This model is very fragile so make sure to lower the support density. PLEASE CHECK OUT MY OTHER PRINTS
Dê vida a um dos personagens aéreos mais amados dos games! Este modelo detalhado do Bebê Dragão captura sua aparência br
There's no turning back with Clancy (unless Hank orders him to). He's fully embraced his fake crustacean life and will do anything for his comrades.
Within the cultural tapestry of the Red Sith, the ceremonial flint knife holds a pivotal role as a revered artifact in the intricate rites of passage known as "Vein Racing." or in some family lines as “Sithlume Ascension” This ceremonial…
Enhanced LRM20 missiles Wolf head decal in cockpit Raised and lowered features. Cut the model in parts Added magnet holes for torso twist and arm rotation.
This is the electronic spirit of Clash Royale SUPERCELL, I decided to make all the characters I like from the game and share them with you. I've left files in different formats for those who want to print them to choose from, files with…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
So wanted to do a Wu Tang Project as i've been on a old school kick for awhile, and they really dont fit the rockmetal guitar picks too well. may still happen. Well Its 2022, its the 30th Anniversary of The Wu, 25th of The Album Forever.…
This is the Heal Spirit of Clash Royale SUPERCELL, I decided to make all the characters I like from the game and share them with you. I've left files in different formats for those who want to print them to choose from, files with the…
Logo twenty one pilots clancy Pro mmu/AMS. Size: 80 x 80 x 1 mm
This is a support free Omni Wrench build. You can print it in color and pieces or just simply split in half version to get it done in 1 go. Glue required in both cases. Lazy version, no support :) Blue parts Black parts (brim reccomended)…
Remixed a great design for my Clank use. Sitting at the end of the table has been difficult to read the cards in the market rows. This solves that with a slight angle. I shrank the sizes and made one of them 1 card holders. Also made sure…
Organize your cards and optimize your deck-building games! This 3D card holder is designed for deck-building games like Clank or Dune. It allows you to position your cards vertically, side by side, for better visibility and easy access.…
This is a John McClane (Bruce Willis) from Die Hard Christmas Tree Decoration. Die Hard is an action movie from the 90's and is considered as a Christmas Movie, then what's better to have that iconical character in your Christmas Tree?…
MAIN FEATURES -No lid lift -Individual player trays -Supports both vertical and horizontal storage -Fit following into 1 box: Clank! - Base game The Mummy's Curse Sunken Treasures Expeditions: Gold/Silk Expeditions: Temple of the Ape…
I recommend downloading the .zip file not the individual files These 3d models can be used to print bracers similar in style to Ursa Wren as seen in her Rebels episode. On parts such as the Right arm side attachment, there are holes sized…
The mask for Yiga Clan members. I included STLs to print it in 3 parts, but you can also use the 3mf file to slice it however you want. Once you print it, you'll need to glue the pieces together, sand (optional), and paint them. This was…
Mandalorian Clan Symbol, Should look quite cool on your wall Tony, Cheers Jace
Print & acrylic draw!
So after printing Sven's Omniwrench I had to design some of the collectibles in the games to add to the Omniwrench. I'm in the process of making a stand for the Omniwrench too and will upload when its ready. I have provided the bolts in…
For the record, this was my first attempt at making something like this and it shows. Files are all pretty self-descriptive, and I didn't really do anything specific with settings. If you do want to put this together for some god awful…
This is a remix of some of the components for the board game Clank in Space by Clank! In Space Organizer (incl. both expansions) by Fabmaszter - https://www.thingiverse.com/thing:4578598 It fits the base game, the Apocalypse expansion,…
This is a re-uploaded model of a Level 1 Golem from Clash of Clans by Daniel Schunemann . I have added the necessary seam/support settings for easier and cleaner-looking prints.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is an organizer for the boardgame Clank in Space. It fits the base game, the Apocalypse expansion, and the Cyber Station 11 expansion. The design works with sleeved cards (I used perfect fit penny sleeves, if you are using premium…
This is a part of our June release! 40% discount on STLs for all Patrons and Tribers! patreon.com/dakkadakkastore myminifactory.com/users/DakkaDakkaStore?show=tribe Try before you buy: download free models, bases and bits → HERE ←. The…
Wu-Tang Clan Spider-Man Face Shell 1.-Sizing - The Helmet may need to be sized for your needs, as it is roughly sized to fit a Average male I recomened using my FREE Heads for Sizing here ----- https://www.thingiverse.com/thing:4885210…
These inserts fit into the Clank! basebox and holds the components, including boards, for the base and atleast two expansions; Clank! Expeditions: Gold and Silk Clank!: Adventuring Party These are the expansions we currently own. There is…
Print 2 each of the Player Decks and Player Tray files. Player Trays are stacked 3 on top of 3 with the cutouts on each row designed to hold 3 of the character boards. The “backfill” pieces serve to fill the remaining space and have a…
Simple and efficient printing. Wu-Tang Clan Christmas cookie cutter for the coolest gingerbread ever. Dedicated to my love Michalka Don't forget to follow my profile so you don't miss anything. It costs nothing and made me happy. Thanks…
Clash of Clans Gems, Gold, and Elixir.
I just made two tiny changes to NoahColly's original design. You will replace the two small spacers with a smaller one and an additional smaller card holder.
"A Clan of Two" is a sculpture by Irish artist James Heffernan (1785-1847). Not originally known to have been made by the artist, it was discovered by a construction crew working on the foundation of a building near a known workshop of…
CLASH OF CLANS TOWN HALL 1 I'VE GOT UP TO TOWN HALL 5 - REST WORKING ON THERE ARE XBOWS - CANNONS - DOUBLE CANNONS - MORTAR'S - MULTI ARCHER TOWERS - REST WORKING ON. UP TO TOWN HALL 5 WILL BE FREE - TO GET REST OF COLLECTION GO…
Français : Travail inspiré par Johnny Vegas qui a réalisé la chose "The Division" https://www.thingiverse.com/thing:1287651 , et du travail que j'avais déjà effectué https://www.thingiverse.com/thing:3387467 . Toutes les parties ont été…
Print 2 of the feet. The tolerances are generous so the holder should be easy to push down the slot. Easy to take apart for storage in the box. Designed for sleeved cards.
Clank Dashboard to organize your play area. Included are deck and card holders that connect to the dashboard. Additionally, they stack fit to hold cards for storage. The dashboard cover is optional and will be a way to keep all of the…
Clanck! Catacombs insert to help set up game faster that with tens of plastic bags ! Don't hesitate to put a like if you download it :-) For certain lids, I printed without top and bottom layer so it make a grid that permit to see…
This is an organizer for the boardgame Clank! In! Space! I used the awesome design by mivinther ( https://www.thingiverse.com/thing:2732444 ) as a template for the player boxes, thanks for that!! The main idea was to keep the existing…
This is a remix of a great design, just wanted a lightweight and quick to print version (and without text in the boxes). I used the exact dimensions of the original and modified the walls to be 2 shells thick at 0.48mm extrusion width…
It's really not Christmas without John McClane crawling through a ventilation duct at Nakatomi Plaza. The included photo is sized to 4"X6" to send to your local photo processor. The 3 images on the photo are 41.5mm X 81.5mm Shameless…
I made this 3D model but all rights belong to Warrior Cats and Working Partners LTD. This is the “Art Deco” clan icon used on the official necklace, bracelet, and badges. As per their terms and conditions, you may not use any of their…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
"Tonight I dine on turtle soup!" Relive the glory days of the Technodrome with this definitive figurine of the original 1987 Shredder. This model captures the classic animated aesthetic, featuring his iconic purple cape, grey-and-black…
.2mm layer height no supports no raft
Francais : . Remix du beau travail de Johnny Vegas. J'ai recoupé avec Slic 3R, pour pouvoir imprimer sur multimatériaux en Dual Extrusion. English . Remix of the beautiful work of Johnny Vegas. I cut with Slic 3R, to be able to print on…
This is a variation of the awesome John McClane (Die Hard) Christmas tree ornament by Frikarte3D . The eye of the ornament has been remodeled to be stronger and look a bit smoother. Colors @ 0.2 mm layer height are: Gold (layers 1-13)…
Scorpion Clan Family Mon as pictured by L5R Wiki Category: Games
Quick and simple wall art of the Tzimisce clan symbol from the World of Darkness, Vampire the Masquerade, VTES, etc.
Basic 45 record adapter, with the Wu-Tang Clan logo
Warrior Cats - 6 CLAN patches, 2-3 color NO AMS
"Must... destroy... Turtles!" Every master villain needs an army, and now you can build yours with this classic Foot Soldier figurine. Based on the 1987 animated series design, this model captures the sleek, robotic look of the Foot…
Intended to showcase the Clank! market cards, this adds an extra slot in the back to accommodate a special type of card which is unlocked in Clank Legacy 2: Acquisitions Inc. (Back only shown in photos to avoid spoilers.) The card can…
Wu Tang Clan Lightbox I used 1.04 flow rate for this lightbox. 04 Nozzle @ 20% Adaptive Cubic Infill Use Textured Plate Face Down Printed with a Bambu X1C with AMS and Bambu Filament
A request from http://www.thingiverse.com/tweekownz/about Sorry this was all I could srcape together. Hmm, unfortunately will need hollowing out. Print instructions Category: 3D Printing Tests
This model has NOT been tested so print at your discretion. It should theoretically work though.
Here is the files for McClane Bear. McClane is a good friend of Barry, and like his friend he seems to just want to be your friend too, do you have space for McClane? maybe he can keep Barry Company. I have included 2 versions of the…
Welcome, and thank you for choosing my model. I made a detailed statue of the one and only Giant from Clash of Clans You will need supports to print the Barbarian King. Happy printing!
Kabeltülle Cable cland inner 7mm outside 10mm inTPU
Some tokens for replacing exisitng tokens in Clank! Legacy. I've added sources in the list, but I cannot see them anywhere with this new design. My only design is the "Best employee" file, which function is only for bragging purposes on…
Replacement parts for Clank! board game expansions. Print at least with 30% infill to add some weight. Category: Toy & Game Accessories
I made this bust of Clank, from Ratchet and Clank. You must be carefull when you retire the supports in the neck. Hope you like it!
If Thul is the clan's patient soul, the Ice Vintners are its brutal fist. These are the lads whose job is to harvest the ancient, thousand-year-old glacial ice for the boss's big brew. And the tool for that job? A bloody great ice-pick…
The Wu letting you know you rollin! Protect ya neck with this killer bee of an add-on. I printed it from Matter3D Basics sun yellow PLA: https://www.matter3d.com/products/basics-series-pla?variant=42420619772081 0.40mm nozzle 0.15mm layer…
The 14 major clan logos ov VtM V5, in lithography form, created through; https://tool.itslitho.com/CreateModel They're in a weird standing formation, so put them on their backs when printing, probably. They're all 100 mm diameter, so…
Now the connection links between the letters are level with the letters. So it is easier to print and you get a smooth finish from both sides. Print Settings Rafts: Doesn't Matter Supports: No **Resolution:** 0.2 Infill: 20% Category:…
If used as an coaster print it completely solid so no liquid leaks inside it
Took most of these from other inserts and modded them a bit. Goal was to store Clank Catacombs, Adventuring Party, Upper Management, and C team in one box. Whats included in the files: * A dungeon row card holder (print 2 copies), super…
I made as a birthday gift and taught I share it. Hope you like it.
Made these for Clank! In! Space boardgame, but I will probably print more and use them for netrunner as well. Print in two parts and glue them together. I use ABS and then solvent weld them together with acetone slurry so it becomes one…
Here's a tip for you: never try to break a Frost-Still shield wall. You'll just break yourself. The Tundra Guard are the unyielding core of that crew, and they are stubborn as a frozen-shut door. They march into battle with massive casks…
Foot Clan Member from Teenage Mutant Ninja Turtles I don't have the link to the website where I found it, it was a long time ago
Who doesn't love some... ratty space ships? I love rats and their aesthetics in scifi wargames, so why keep it on the ground and not lift them up in the sky? You now have all the ships to print your own ratmen clans army for Grimdark…
This is the organizer for Clank!: Catacombs board game. Keeps the original cardboard inlay but adds boxes to organize the components that otherwise would be stored in baggies.
I just created a funny Christmas decoration, reminiscent of a scene from the movie Die Hard . According to the photo, you probably remember John McClane in the ventilation shaft :) My model is a cube with dimensions of 100mm on each side,…
Inferno Tower for single color printers. Better print center parts with 97% - 98% scaling or it might not fit. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Resolution: 0.2mm Infill: 0-15% Filament: eSUN PLA+…
Welcome, and thank you for choosing my model. I made a detailed statue of the one and only Barbarian King from Clash of Clans You will need supports to print the Barbarian King. Happy printing!
Phoenix Clan Family Mon as pictured by L5R Wiki Category: Games
Level 12 mortar defense from Clash of Clans. V2 version points at an angle as if it was defending. Thank you for downloading my design. Remember to like the model if you download it! :) Please consider offering me a beer if this helped…
Toji and maki lithophanes
This is a very minimal stand that will hold the 6 market deck cards, the 3 reserve decks, and the standard monster (Goblin). These models stand upright so that the cards are easier to see. These stands will easily fit inside the box. This…
I printed this on my Bambu Labs X1 Carbon and did the first layer in black then the rest in red.
Once again, I couldn't find an insert matching my needs for Clank Legacy 2, so I made my own! The pictures don't spoil anything, but the tokens insert could give hints about what it will contain, so that's why I marked this model as…
Bonegrip Gunner is a heavy enforcer of the Ashmaw Clans , a brutal wasteland faction that survives among the dead refineries, rusted scrap-fields, and poisoned frontier ruins of Vorrakai Frontiers . Hardened by scarcity and constant…
This is a slanted deckbox I made for the cards in the boardgame Clank! and the Sunken treasures expansion. It fits all the adventure cards and the market cards. I keep the 4 starter decks in separate baggies so they are not made to fit in…
I made this 3D model but all rights belong to Warrior Cats and Working Partners LTD. This is the “Art Deco” clan icon used on the official necklace, bracelet, and badges. As per their terms and conditions, you may not use any of their…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Builder Hall from Clash of Clans' Builder's Base (Level 2) Thank you for downloading my design. Remember to like the model if you download it! :) Please consider offering me a beer if this helped you! PayPal: @giovannicolo //…