1 / 9
John McClane - Christmas Bauble / Ornament / Decoration — image 1
1 / 9

John McClane - Christmas Bauble / Ornament / Decoration

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Christmas ornament / 100x100x100mm cube

Rating
5 / 5
Likes
24
Downloads
56
Makes
1
Views
296
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I just created a funny Christmas decoration, reminiscent of a scene from the movie Die Hard. 

According to the photo, you probably remember John McClane in the ventilation shaft :)

 

My model is a cube with dimensions of 100mm on each side, and a weight of 200g, if you want it lighter, just use the "scale" in your slicer and reduce the number as needed.

 

Warning: there are bridges and overhangs in my print profile, it won't be the easiest print.

If you don't want to print the bridge, you can just turn on full supports, but in this case, by the way, there will be too many unnecessary supports inside the object.

 

My print settings: PLA , 0.16mm layers , 8-10% gyroid infill, 28° automatic tree supports - disabled the roof supports, just created a line on the edge around the head to make it easier to create a bridge (pic below).

Just use my profile :)

 

 

 

 

Happy printing:)

Tags