1 / 9
John McClane - Christmas Bauble / Ornament / Decoration — zdjęcie 1
1 / 9

John McClane - Christmas Bauble / Ornament / Decoration

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Christmas ornament / 100x100x100mm cube

Ocena
5 / 5
Polubienia
24
Pobrania
56
Wydruki
1
Wyświetlenia
296
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I just created a funny Christmas decoration, reminiscent of a scene from the movie Die Hard. 

According to the photo, you probably remember John McClane in the ventilation shaft :)

 

My model is a cube with dimensions of 100mm on each side, and a weight of 200g, if you want it lighter, just use the "scale" in your slicer and reduce the number as needed.

 

Warning: there are bridges and overhangs in my print profile, it won't be the easiest print.

If you don't want to print the bridge, you can just turn on full supports, but in this case, by the way, there will be too many unnecessary supports inside the object.

 

My print settings: PLA , 0.16mm layers , 8-10% gyroid infill, 28° automatic tree supports - disabled the roof supports, just created a line on the edge around the head to make it easier to create a bridge (pic below).

Just use my profile :)

 

 

 

 

Happy printing:)

Tagi