252 models
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
When toying around with Voron 3D Printers you usually endup having one or two spare extruders laying around in your tool drawer. This little gridfinity-bin holds your Voron Clockwork extruder firmly in place, always ready when you need…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
NOTE: This model is only published on Printables (here) and my Github repo , licensed under GPLv3 license. Any redistributed work should provide appropriate attribution and copyright notice. Large Gear Clockwork2 As title, it's basically…
I've made a modified version of clockwork2 extruder to use my nema17 stepper motor that was lying around. currently there is no option to attach wire cover or use pcb https://photos.app.goo.gl/kay8pqxwpjpPym6F9 video example of working…
Update 14.10.2023: As @adamclerk_238889 commented that the CW2 main_body has been updated in July '23 (the little nose has been shorted a bit - have a look on the pictures). The filament sensor main body is also updated now. It also seems…
A plant pot inspired by stacked clock gear - looks great in modern interiors. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
The latch on the Voron ClockWork 2 extruder has a very thin cross section in a spot where a large amount of force is applied in order to close the latch. This results in a very fragile and easily broken latch piece. This is a drop-in…
The Kickstarter is up to 97 unique creatures and 6 unlocked Patreon bonus minis 😵 Final stretch...so exciting, so much more to unlock!…
Remix of WouterE_ Ender 3 v2 Stealthburner mount. Modified to fit the stock Clockwork 2 files, spaced out to fit the HartK Stealthburner toolhead board, BL-Touch mount has been removed, and a groove has been added to the rear for the…
No explanation needed if you use the SB CW2. The original stealthburner lever design is thin and there's plenty of room for adding material. We call this the fat_finger mod. If you cannot print one because you only have one printer and…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I combined the best parts of two models to fit my use case. With credit to the original designers, features of this remix are: Compatible with the excellent Parametric Umbilical Gland (PUG):…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Update: I made the ECAS hole tighter with the anchor groove from 8.5mm to 8.3mm and added STEP file Switches are Omron D2F or compatible. Ball is 5.5mm Selftaping screws 2x10 or M2x8 Tested with TPE88 filament. If you want use both…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Parts should fit perfectly if printed with recommended Voron settings. For those who want to put in on Voron SW, you may need to edit or sand a bit of the carriage parts(to which you attach mgn12) as it may interfere with the stepper…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
made these for my Star Trek clock they are intended for these cheap movements or clockworks from e.g. china Print at 0.2 and… Arachne wall generation ON! biggest problem might be the second hand, so I made 3 versions from loose to tight…
This is an insert / organizer for Root. It supports all expansions released through Homeland (minus the Clockwork expansions), plus the deluxe clearing and deluxe frog clearing markers (see the detailed list below under “Which Content…
My take on the Clockwork Dragon uses trademarks and/or copyrights owned by Paizo Inc., used under Paizo's Community Use Policy ( paizo.com/communityuse ). I am expressly prohibited from charging you to use or access this content. My take…
This is a fixed flip lid cover for the Clockwork Pi's uConsole pocket computer. You will need longer M4 screws than the ones provided (the thread in the body is deep, you have margin) Print Settings Supports: Yes Notes: The cover needs…
This is a lightweight protective armor I designed for my Clockwork Pi uConsole. The enclosure is an exercise in adding additional durability and expansion while trying to maintain the device’s compact and portable nature. The design…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Tick-tock, tick-tock, tick-tock. What lies between the beats of time? Rythme. Satisfying to build, watch and listen. I was having a lot of trouble seeing the proper angles for designing a deadbeat escapement from scratch, so I started to…
I remixed the plate, because it didn't fit the ClockWork2 mod. the 2 upper stands were to high, the holes underneath were not deep enough and also the walls were too thin. You will find attached the STL and the STEP files of the…
The existing ECAS mods for CW2 didn't work great for me, so I quickly made this to allow me to run a Bowden tube from my CW2 to the ERCF unit I'm playing with at the moment :) ( If you have fitment issues with the ECAS, give me a shout on…
Was a bit nervous about the proximity of the AC1200 board with the solder points for the battery so designed this holder to ease my nerves.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is a snug-fitting cover for the picocalc that can cover the screen and keys when not in use, or be snapped into place in reverse, like a graphing calculator. Someone had already designed a cover for this thing, but it didn't snap…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
I wanted to create a steampunky clockwork robot for use in my upcoming Shadow of the Demon Lord game. I remixed Mechatronist's floating robot with some other bits and bobs to make this wheeled variant, which I then realised looks a lot…
UPDATE for the 2023-07-10 version : The upstream model by @nhchiu was updated with some fixes. I uploaded an updated main body STL for LGX gears and with the ECAS coupling because that's what I personally use in my extruder. The other…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
1-26-There is a new main body and a new cutting arm (to replace the cutting arm from filametrix). The standard cutter arm doesn't allow for enough movement to cut the filament with the larger guidler. This uses the latest model from the…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…
Putting it at 4000% size should make it easier to work with. This model turned out really well and even looks a bit more sophisticated than the picture. It sports a faceplate now, and doesn't have any areas that look warped or imperfectly…
This CAN bus cable retention clip is a reworked version of the v1.1 retention clip from the official BigTreeTech GitHub. I created it after finding that the original version interfered with the USB-C port and my extruder cables in a…
I am using this EBB SB2209 RP2040 can board from biqu and I noticed the driver tends to heat even when not using a door cover at all. the chamber was also open. NOTE: I didn't tested this. I eventually installed a g2e
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
This is the next evolution of using stealthburner on the BLV cube for me. Previously, https://www.printables.com/model/261349-voron-stealthburnerafterburner-mount-for-blv-w-orb, I had adapted an existing Orbiter 1.5 mount and designed my…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Maybe some one also wanna use this interesting Extruder with umbilical mod like me. :)
This mount enables you to mount the clockwork 1 from the front, so you can use Voron TAP or the Clockwork 2 x carriage. No more playing with the bolts behind the dragchain. Positions of some heatset inserts also changed, ex. guidler…
Something I made long time ago. Integrating the biohazard symbol in a clockwork for steampunk decor. I've drilled the center and actually put a clock behind it. FOUND A BUG! The cog screw heads in the corners is floating in mid air… Ver 2…
I took the Source model and spliced the top off to overlay with the most-recent update of CW2 (which had some geometry changes). I also took the stronger latch design (official) and remixed it with the cutouts for the ECAS
Voron Stealthburner Canbus Mellow SHT-42 Mount for LGX and Clockwork 1 incl. Stepfile Parts Needed: M12x1,5 Strain Relief 2x M3x25 4x M3x30 2x M3 Inserts Location:
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Clockwork Valentine Fidget Locket Make your loved one's heart spin this Valentine's Day! Working locket with spinning cog in the centre, working print-in-place hinge and removable insert. The spinning centre acts as a small fidget.…
Current (as of 9/23) version of the Clockwork 2 main body with a filament sensor added. I originally printed this model and discovered that the RC1 main body doesn't work with the current versions motor plate. I used the Omron D2F-L…
The RP2040 chip of the LDO Nitehawk SB toolhead board gets very hot with an enclosed chamber and is also mounted on the back side of the board facing the extruder motor which adds to its heat exposure. For a 55C+ chamber temperature I was…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
I did not find any display cover for my uConsole that I liked, so I created my own. V1 is a bit more rigid than V0, if you need that. There should be enough space to access USB interfaces with the cover on. Print it with the top side…
A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. SB2209 CAN (stm version) not compatible Based on user feedback, support for the…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Simple adaptation to be able to reuse a Nema 17 motor with the Clockwork 2 extruder model, using the latest version of Steathburner as a base. → Use the remaining pieces from the original repository inspired by MLoeko 19/08/2025 - add…
This is based on the current version of the CW2 (07.01.2022) A remix of the SB filament runout sensor. I started from scratch and moved the trigger point as far away as possible to give klipper time to react to the runout. Also compatible…
This is my Cursed Clockwork Rabbitfolk. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. An original model for with I used uses basic files provided by…
A mount to use stealthburner with cw2 on default ender 3 mounting plate.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Am sure anyone with a Stealthburner with any toolboard especialy the FLYSB2040 has foind it is a pain to get access to the connectors. So I remixed the great door mod by Alexander Þór 🇮🇸🇬🇧, I have also added another sensor to the one…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
These models allow you to attach the Voron Stealthburner toolhead with Clockwork2 extruder to an Ender 3. They replace x_frame_SW_left/right and the [a]_Belt_Clamp_SW_x2 from the main Stealthburner files. I modified the parts to use Voron…
This is version of printhead mounting adapter for Anycubic Vyper and Clockwork2 extruder for original backplate. The adapter allows to mount latest version of Stealthburner printhead with Direct Drive extruder Clockwork 2 on original…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
A Clockwork rat. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
An air of industrial sophistication, combining geometric steampunk elements with a modern design. If you like my earrings you can visit my earrings collection
Based on the the ideas of @DavidRelich and Voron Afterburner hall effect filament sensor, i'll give you the hall sensor mod for the stealthburner clockwork 2. INFO: the photos show the old model! The print files are the updated version,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
A remix from the great Afterburner Galileo Clockwork /EDIT In the files you will also find a variant for assembling an original Orbiter Extruder, so you don't have to print the printed parts that depict the Orbiter, but only what is…
I was very happy with cliftoce's PUG mount for CW2 but the heatsets were pulled out when I tightened the clamp. Simple remix to move them to the back so they can't pull out. Parts are oriented for printing with no supports needed@40%…
Remixed Adapterplate to use Voron Stealthburner and direct drive Clockwork2 on Anycubic Viper. I made some small changes to fit the clockwork 2 on the adapter plate by fragmon. Just normally print it and it should fit perfectly. I had to…
EN Winding key for children's toy. Internal shape of the hole - square, 3mm. Print setting: 0.15mm Material: PLA Filling: 15% Collar: recommended Supports: print hot bed only (recommended but not required)…
A simple yet elegant no-support 3D printed toy. Using a cheap N20 gearmotor. You may want a gearmotor in the 15-30 RPM range. Can be run off a single AA battery or a solar cell. I have other, more complicated versions in development. I'd…
This toolhead sensor uses a micro switch and a 7mm ball bearing to detect filament after the extruder for use with the ERCF. and is compatible with the big tree tech EBB 2209/2240. It also uses an ECAS bowden clip.
A centaur-shaped mechanical warrior for your TTRPG of choice. This could be a “Warforged” from Eberron , an “Anvilwrought” from Theros , or a “Clockwork” from Shadow of the Demon Lord . Of course, you can simply use it as a unique…
model of Clockwork Pi uConsole LTE/No LTE side plate, in case of losing origin plate or wanna place Wifi antenna inside machine body. Inspired by Anbernic RG353M, a all-metal handheld console which has WiFi antenna placed on plastic side…
From official website, all parts from uconsole in step file
There are two changes compared to https://www.printables.com/model/426754-stealthburner-clockwork2-main-body-with-ecas-and-r : ECAS hole has small o-ring of 0.1mm to make ECAS stay in place, as depending on how it is printed it is not…
Includes two-piece and open variants so that the cable isn't trapped in the mount. Get the CAN board mount from the original model.
This is my Clockwork Goat. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. An original model for with I used uses basic files provided by MZ4250 . If you…
I added the 3DO pcb holder to the latest files from BigTreeTech for the EBB SB2204/SB2240 Clockwork2 main body and pcb cover.
Hi I just made this runout sensor for the clockwork 2 work with a 6mm airsoft BB. Since I didn't have a 5.5mm steel ball laying around, but a ton of 6mm BBs, I chose to make it work with a 6mm ball. I have tested it, and it works fine…
Stealthburner PCB is in quite hot conditions and some airflow is good for cooling. Did not want to add additional fan and existing remakes are fully perforated. Thought that less is more here also…
I wanted a hardshell for my uConsole, I wanted a way to attach it to my person or baggage, I wanted ways to attach possible add-ons result: Picatinny-railed hardcase with Molle-compatible slits for belts. Upper part of the rail splits…
my Brain Slug version works fine and EBB is around 36°C that really nice.. Fan is mounted with heat inserts for M2.5 and M2.5 screws with 8-12mm length Every time I look at it I think about this https://futurama.fandom.com/wiki/Brain_Slug
This is a modified Voron Afterburner extruder for 2.85mm filament. All printed parts are made from ASA/ABS. The setup uses standard Afterburner components — the only difference is the use of 2.85mm BMG-style gears and a compatible hotend…
This is a remix between the official bigtreetech model and the Leiwandizer model, the difference is that the side cover is bigger and the body is different. It uses a micro switch and a 5mm steel ball.
Adding an ERCF V2 to my Voron, could not find Filametrix CAD that incorporated both filament detection switches, M6 threaded bowden, and compatiblity with my LDO PCB. Expect this is a very narrow combination of desirable features but…
Clockwork Photografer Category: Creatures
A 3D printable gnome tinkerer carrying a clockwork backpack that transforms into a base. The gears and pipes should be stylized but chunky, avoiding fragile thin details. The whole model should be in one piece, with an unusual…
Model adapting clockwork 2 body to fit bowden PC4-M6 coupler to use with bowden extruder
A flouting clockwork robot drone. This miniature is designed to be used with 28mm-32mm scale figures in tabletop games such as Dungeons and Dragons. At this scale it is similar in size to the torso and arms of an average human figure but…
Iconic Movie Villains - A Clockwork Orange - Alex DeLarge - 1971
