Search results: closet

Sort order

566 models

P
PrintablesPrateek R

Rubbermaid Closet Wire Shelf Clip

This is a mount clip/bracket thingy for a Rubbermaid closet wire shelf. The original that came with the kit had the built in nailed anchor for drywall that got damaged when I needed to relocate the shelving. This version works best with…

Downloads
435
Likes
77
Rating
5
P
PrintablesJérémy Reeder

Closet Divider

A divider for a closet's clothes-hanging rod.

Downloads
362
Likes
45
Rating
5
P
PrintablesJan Lipovský

Heart cabinet/closet door knob

cabinet/closet door knob - width is 45mm height is 23mm with 16mm place for fingers and 3mm hole for screw. Printed with 20% infill with pink PETG.

Downloads
303
Likes
50
Rating
5
P
PrintablesCelta

Closet shelf pin

Replicated the pins that came with the closet and made them a bit bigger to hold the shelves better and with a tighter fit. Printing In order for the part to have good structure, the printing orientation should be parallel with the pin.…

Downloads
232
Likes
43
Rating
5
P
Printablesjohn doe

rebuild of an old coat hanger for drying clothes on closet doors

not my design, it is a remake from an old hanger found at my parent's home. useful for drying clothes on a closet door with enough distance to the closet. diameter of the door part is 18,3 mm, should also fit slightly thinner doors (1 mm…

Downloads
217
Likes
54
Rating
5
P
Printablescedarrapidsboy

Closet Sliding Door Guide (Floor)

In a heavily trafficked entry way, with an excitable St. Bernard, the thin hardware store closet door guides don't stand a chance. I modeled this to be a drop-in replacement – and tougher. Print it with several perimeters for strength.…

Downloads
191
Likes
37
Rating
0
P
PrintablesJackson

Closet Rod Filament Hanger 3in

This is a simple filament spool holder that hangs on a closet rod, or for that matter any rod. The side locks on to the shaft via a 45 degree turn. This was designed in mind for my MMU2 unit. Allowing me to better feed filament from…

Downloads
189
Likes
34
Rating
4
P
Printablescryptkicker

Sexy Closet / Wardrobe Door Knob

Tired of spending more than you want for a closet/wardrobe door knob from a big box retailer? Well look no further! Here you'll find a knob design with a print-in-place hole to secure your nuts and provide a tight hold of your…

Downloads
164
Likes
22
Rating
5
P
PrintablesPaul

Ice Cream Cone Cabinet or Closet Knob with Secret Storage

This is remix of IXPatch's soft serve screw top storage container. The hole in the bottom is 3.9 mm in diameter. I recommend printing the soft-serve with supports around the outside. You can paint out support from the inside. The default…

Downloads
155
Likes
68
Rating
5
P
PrintablesMichael Browne

Fully Parametric Closet Hook for Backpacks (w/ OnShape & Fusion 360 support)

I wanted a way to finally hang up all of my backpacks, but it seemed like every other option out there was designed with specific closet rods and/or backpacks in mind, and either the dimensions were wrong for my purposes and no CAD was…

Downloads
152
Likes
33
Rating
5
P
PrintablesMarco Garavello

Closet Space Saver Hanger – Multi Hanger Organizer

🧥👕👖 Maximize closet efficiency! This 3D printed dual-mode space saver hanger allows you to hang multiple clothes vertically (to save up to 70% of space) or horizontally (for quick access). Thanks to its 8 mm thick structure , it is…

Downloads
150
Likes
12
Rating
0
P
PrintablesKyle Shields

Backpack Hook for Closet Shelf Bracket

About I couldn't find a hook like this so I designed one myself! I've been using this to hold my backpack for about a week, it's been working great so far. Dimensions Total height: 71mm Hook width for backpack: 7mm Hook width for closet:…

Downloads
138
Likes
19
Rating
5
P
Printableslizard_e_

Closet Rod Filament Hanger (Shorter)

I printed with 3 walls and 15% gyroid infill With my settings (on my printer), the spool can hang from just 1 side of the hanger. The second side can be printed out for even hanging which looks better and offers additional support

Downloads
136
Likes
11
Rating
5
P
PrintablesDebort

Dyson attachments holder: closet version

Print with 0.15 mm layer height in PETG. 15% infill. A raft helps prevent lifting on the hanger print. A small amount of post processing might be necessary to get smooth attachment and detachment. See drawings for dimensions and assembly…

Downloads
131
Likes
34
Rating
4.33
P
PrintablesBrad

Hook for Container Store Elfa Closet System Wire Shelves

Simple clothing hook. Clips on to the Elfa wire shelves that the Container Store sells for custom closets. The hook can slide forward to hang things or backwards to be out of the way. Able to hold a shirt, pants or hat. Not for heavy…

Downloads
127
Likes
39
Rating
5
P
Printablestammets
Downloads
105
Likes
25
Rating
0
P
PrintablesObe_Design

Hook for IKEA PAX Shelf Holes – Space-Saving Closet Organizer

Hook for IKEA PAX Shelf Holes – Space-Saving Closet Organizer I'm uploading a part of a model designed to fit into the standard holes found in IKEA PAX wardrobes – the ones where you normally insert shelf pins to support your shelves.…

Downloads
71
Likes
11
Rating
0
P
PrintablesJack Frost

Tube Closet Storage Solution (TCSS)

You wouldn't 3d print a full sized closet would you? Why: A small Project of mine is to make easily expandable function furniture storage solutions. This is a open source project anyone can contribute to and also my first project on…

Downloads
58
Likes
17
Rating
0
P
PrintablesT_K

Drawer rail for Jysk closet Hagendrup

The original rail snapped in two parts so it was impossible to get the drawer all the way in. I constructed this and it worked great. To minimize supports and still have some strength i constructed it with a 0,2 mm raft and printed it…

Downloads
55
Likes
6
Rating
0
P
PrintablesDavideeek

Simple closet door hook

Simple closet door hook

Downloads
11
Likes
0
Rating
0
P
PrintablesYosuof Salem

Perfume / cologne holder for closets .

Its really easy to print but u have to bare in mind that you only need supports for the bottom and infill above 15% . Keep the speeds and temps low for better results .I used fuzzy skin for this but you can save time with it off . PLA…

Downloads
9
Likes
5
Rating
0
P
PrintablesGot2b3d - Oxana

Barbie Closet

No supports needed. The back wall of the closet is 1.5mm thick, so at 0.25mm layer height and 3 solid top and bottom layers, it will print solid. The rest was at 15% fill. The doors' edges may need a bit of sanding to slide smooth.

Downloads
2,874
Likes
417
Rating
4.57
P
PrintablesM S

Ultra Strong Latch for Drawers or Closets

This latch is very strong to close a closet or drawer with big power. I designed the latch for my closet. Our cats always tried to open the door and do some chaos with our clothings. With this latch the door is always closed.

Downloads
2,473
Likes
1,396
Rating
4.9
P
PrintablesSponge

Closet Hook Extension

Give me a Like 💗 Follow Me 😁🤗 Closet Hook Extension Closet Hook The hook has a 10mm hole. It comes in three thicknesses. You can simply attach the hook to the hanger and hang it. If you have other ideas, feel free to change it, I Uploaded…

Downloads
2,332
Likes
1,013
Rating
5
P
PrintablesRagingRoosevelt

Closet Rod Holder, Top-Mount

Inspired by @Mimo47_326620's Closet rod holder for hanger . I've already made a 1-5/16" 3mf and there are STEP files (should work in OrcaSlicer, Prusa Slicer, Bambu Studio) for 1" 1-1/16" 1-5/16" 1 1/2" 16mm 20mm This lets you hang a…

Downloads
1,015
Likes
550
Rating
4.5
P
PrintablesBike Cyclist

Parametric Clothes Hanger Hook(Closet Hook)

Parametric Clothes Hanger Hook (Closet Hook) Hook to allow daisy-chaining of clothes hangers. Improved and parametric remix of the original by goprinttech: https://www.thingiverse.com/thing:5254835 Improvements: Smaller size for quicker…

Downloads
981
Likes
182
Rating
5
P
PrintablesStamos

Doll Closet

This is a modern closet for dolls. Use pieces of 1.75 filament for the hinges. First place the filament piece at the top or bottom of the door, then put the door on the closet frame and then insert the other piece. The printed model in…

Downloads
947
Likes
173
Rating
5
P
PrintablesDouglas Hale

Purse, hand bag, or backpack hanger for closet clothes rod

Basic dimensions are down in a drawing, you should scale the model to fit your bag and clothes rod. Print on the side, no supports needed. Add enough wall layers to achieve your required strength.

Downloads
882
Likes
124
Rating
4.91
P
Printablesprntmkr

Closet Rod Holder - Build your own wardrobe

Intro A versatile and functional 3D-printed rod holder designed to help you build custom wardrobes, closets, or storage racks . This model serves as a sturdy mount for a closet rod or clothing rail — just print, assemble with two pieces…

Downloads
837
Likes
845
Rating
5

Magic Hanger Closet Organizers

You can get the original from VAL here https://www.printables.com/model/529390-magic-hanger I made this remix to adjust the model a little to fit my needs.

Downloads
746
Likes
295
Rating
4.71
P
PrintablesDani_GT

Barbie clothes closet

Printed in PLA, 15% infill with the standard Bambu Studio values. AMS is not required to print the colors. A skewer stick has been used to make the bar inside the closet. The pieces are glued. Door pivots need to be trimmed and sanded a…

Downloads
718
Likes
194
Rating
4
P
Printablesfloano

Open Closet - Ikea style - Barbie size

Print back side down. No supports needed.

Downloads
710
Likes
141
Rating
5
P
PrintablesJohn

Strong Backpack Hanger for Closet Rod

Store backpacks and other items neatly in a wardrobe off the floor. Three variations available for different handle strap widths. Supports heavy backpacks with no issues if correct print settings are used. Print entirely with walls for…

Downloads
697
Likes
364
Rating
5
P
Printables3DtoD

Heavy Duty Closet Pole Sockets

🧰 Heavy Duty Closet Pole Sockets A 3D-printable Heavy Duty Closet Pole Socket designed to support standard closet and wardrobe poles. This model provides a practical DIY solution for replacing or creating wall-mounted closet rod supports.…

Downloads
681
Likes
433
Rating
4.8
P
Printablesknickers

Closet Rod Holder w/ locking top

This 1.25" closet rod holder has a split top with puzzle piece tabs to grip tightly against stretching forces. The two halves have tight tolerance and fit together snugly, no need for glue or screws. Also included is an enclosed holder…

Downloads
611
Likes
66
Rating
4.6
P
PrintablesDada3Dcraft

Bag Hanger for Closet

Space-saving, sturdy bag hanger for closets: sleek, mounts easily, keeps bags organized and accessible. Works for organizing Purses, Backpacks, Satchels, Crossovers, and Handbags. __________________ Notice: These designs are copyrighted…

Downloads
547
Likes
96
Rating
5
P
PrintablesKelev

Closet - D&D Scatter

Small closet for indoor encounters Supports recommended

Downloads
489
Likes
95
Rating
5
P
PrintablesThomPatterson

Strong Closet Rod Holder

Included model is for a 1.25" (32 mm) rod. Fusion 360 file is included, change the parameters to get a model for whatever size rod you need.

Downloads
488
Likes
66
Rating
5
P
Printablespfmike

Filament Spool Closet Rod Hanger

There are others out there, this is what I came up with. This lets you hang your filament spools from a 1 3/16" (30 mm) closet rod. The lip on the end is 54mm, works great with my 1 kg rolls of Monoprice filament that I've been using.…

Downloads
425
Likes
57
Rating
4.67
P
PrintablesPerryusaf

Closetmaid Wire Shelf Hat Holder

If you are having a hard time snapping the hanger onto the wire rack try adjusting the x-y hole compensation by -0.2mm.

Downloads
421
Likes
106
Rating
4
P
PrintablesSaul

Closet Remix

You will have to super glue top and bottom parts of the closet. Also printed with 2.85mm filament so I used a peices of thick paper clip for door hinges.

Downloads
392
Likes
115
Rating
5
P
PrintablesBitterBuffalo

Closet Rod Hook

This simple hook will fit a standard Closet rod and not spin once attached. The inner diameter is 31.5 mm (or just under 1.25 inches) . This will easily hold most winter coats, which is what it was designed to do. Print Settings Printer…

Downloads
379
Likes
24
Rating
5
P
Printablesscmanjarrez

Closet rod bracket

Closet rod bracket Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: BQ PLA White How I Designed This =================== Created in fusion360, .f3d file provided.…

Downloads
350
Likes
38
Rating
5
P
PrintablesEadubs

Closetmaid Wire Shelf Clip

This is a remix of the "Rubbermaid Closet Wire Shelf Clip" by Prateek R. This one is for my Closet Maid wire shelves which have a clip that is a little bit longer between the shelf and the screw hole. I made it to use some drywall hangers…

Downloads
342
Likes
48
Rating
5
P
PrintablesCrypt

Closet Sliding Door Guide

Prevents sliding closet doors from getting off track

Downloads
334
Likes
68
Rating
5

Closet Rod Holders for 1.375 inch/34mm pole

Choose deep or normal pockets- Scale up to fit any size rod. Bedroom closets, filament storage & more!

Downloads
330
Likes
142
Rating
5
P
PrintablesDP

Closet door or cabinet pull handle knob

A pull knob for accordion closet doors, cabinets, drawers, etc. It's designed to be fixed from the other side by a #6 screw, such as a long enough drywall or construction screw. Prints pretty easy on a sticky build surface. Recommend you…

Downloads
313
Likes
25
Rating
5
P
PrintablesShoe

Overengineered Filament Closet

Bill of Materials with links at the very bottom. Some links are part of an Amazon Associate program, and I may receive compensation from qualifying purchases. Introducing the Overengineered Filament Closet. The system uses the RepRack:…

Downloads
278
Likes
195
Rating
0

Rotated S-Hook Hanger for Backpacks – Closet Rod Optimized

I designed this rotated S-shaped hook to hang my backpack flat against a closet rod or bar. Unlike a regular S-hook, this one is rotated 90°, so your backpack hangs parallel to coats and clothes – saving space and keeping things tidy.

Downloads
275
Likes
28
Rating
4.5
P
PrintablesGeNiUS

Doll Closet

doll closet

Downloads
272
Likes
80
Rating
0
P
PrintablesAlgot Fransson

25 mm rod/bar holder/bracket for closet/wardrobe etc.

3 different models depending on screw type for mounting. - Rod holder 25 mm IKEA PAX screw (used for the pre drilled holes) - Rod holder 25 mm countersunk screw - Rod holder 25 mm round head screw Distance between holes are made for the…

Downloads
260
Likes
42
Rating
5
P
PrintablesKetil

Wardrobe closet rod bracket / bar holder

I was busy designing yet another one of these, but then I came across this very solid looking model by printandplay on thingiverse. My rod is Ø 25mm (I'm using the inner part of an IKEA extendable curtain bar that is no longer in use, but…

Downloads
259
Likes
31
Rating
5
P
PrintablesJulius3E8

Belt Hook Hanger for Closet

I only have a couple of belts and only one that I wear regularly. All belt storage systems seem to assume that I own 10 or so and I'm just not a big fan of hording stuff that I never use. This is just a no-nonsense way of storing that one…

Downloads
244
Likes
54
Rating
4.63
P
PrintablesSasquatch

Closet Dowel Hook

A quick hook for closet dowels with 1-1/4" diameter. Good for hanging packs and other non clothing items. I printed this at 15% infill with 1mm wall thickness. I haven't loaded it to failure yet but it is plenty rigid enough.

Downloads
238
Likes
49
Rating
5
P
PrintablesEric Sohng

Closet Rod End Support / Bracket

End support for a closet rod. The slot fits a 33.70mm rod snugly. Center hole is designed for a countersunk screw and the top hole is for an optional nail to keep the bracket in the proper orientation. Recommend strong infill pattern and…

Downloads
237
Likes
54
Rating
5

ClosetMaid Wire Shelf Label

I wanted to label the freshly organized wire closetmaid shelves to ensure they stay that way and the closest solution I could find was slightly too large for my shelves so I trimmed it down to size! Model is now 26mm tall and ~72mm…

Downloads
229
Likes
31
Rating
5
P
PrintablesRCFD

Closet door latch

Small latches that screws into the door frame stop closet doors from swinging back open. Uses one M4 wood screw.

Downloads
228
Likes
20
Rating
5
P
Printablessyca lol

Barbie Closet for Printers with 230mm printbed size

I remixed the Closet to fit my Ender 3S1-Pro. It is still a tight print, but it works.

Downloads
227
Likes
52
Rating
5
P
Printablesshadybailey14

Baby Closet Dividers

Closet dividers for clothes hangers that attaches to rod.

Downloads
205
Likes
53
Rating
4
P
Printablesbizmyth

Filament Spool Hanger for Closet Rod Remix

These hooks should fit almost all 1kg filament spools. It fits around a standard ~18mm closet rod. I recommend printing in PETG with additional (4 or 5) top and bottom layers to improve the strength and prevent it from bending under the…

Downloads
205
Likes
24
Rating
5
P
PrintablesKurt Gluck

Modified Barbie Size Closet ( 1/6 scale )with Modern Doors including hangers I found

Remixed doors to have modern easy to grasp for granddaughter handles. I only include a single stl file, you just swap x axis in slicer. I include 3mf file, it has LEFT and RIGHT printed on door in different extruder. You change this to…

Downloads
204
Likes
49
Rating
0
P
PrintablesMathias

Baby proofing latch and lock for drawers and closets, easy to print baby-safe system

A set of easy to print latch and lock to baby-proof drawers, closets, cabinets, etc. by making them harder to open for babies (but not adults). The pieces are easy to install using wood-screws of 3 to 4mm diameter (and approximately 15mm…

Downloads
200
Likes
53
Rating
0
P
Printablesjako_

Backpack Hanger for Closet Rod

A simple and functional hook designed to hang a backpack from a closet rod. It's ideal for spaces where there’s no room for bulky hangers or when a backpack doesn’t sit well on a shelf. The hook is designed to fit standard closet rods…

Downloads
199
Likes
32
Rating
5
P

Closet Rod Backpack Hanger - Heavy Duty

Designed to snap onto a standard 1 3/8" closet rod but can be used on smaller diameter rods as well. Print in something strong and flexible like PETG, with as many wall loops as you think you'll need (I recommend 4 or more).

Downloads
196
Likes
22
Rating
5
P
PrintablesJungleJulia

Makeup organizer, closet organizer

I was fed up with the mess in my bathroom-closet: made for standard size bathroom-closets modular 15x10x2cm/ 17x10x2cm. For beauty sponges, Serum-bottles, creams etc… works with 30% grid infill up to 100% layer-height 0.2mm printed with…

Downloads
195
Likes
57
Rating
5
P
PrintablesFelix Morgner

Ikea Closet Handle

This is a simple handle for a line of Ikea closets. Sadly, I can't recall what the closets are called.

Downloads
193
Likes
32
Rating
0
P
Printableschking

Closetmaid Rod End Cap

An end cap for the Closetmaid rod ( https://www.amazon.com/ClosetMaid-2051-SuperSlide-Adjustable-Hanging/dp/B00KZZ5JZQ ).

Downloads
185
Likes
17
Rating
5
P
Printablesstayfunnnnn

Hat closet hanger

A small and compact hanger that can be used to neatly hang and store things like caps or belts in closets. It's strong enough to support some light bags as well.

Downloads
184
Likes
70
Rating
5
P
Printablesjens j

Closet rail hanger hooks

printed some very simple hooks for hanging relatively lightweight (i.e. a few kg or less) stuff like empty backpacks, and other stuff sized to fix approximately 33mm round rail in two sizes: shorter and longer

Downloads
183
Likes
26
Rating
5
P
Printablesinteractive3

Bag & Backpack Hanger for Closet Rod (Clothes / Coat Hanger)

I wanted a simple component to hang bags and items on a supporting rod with a couple of goals - prints on its side for strength, no support required, hangs level when loaded, doesn't hang too low from the bar, and looks uncluttered. I…

Downloads
182
Likes
35
Rating
4.67
P
Printableswookets

Closet Maid Wire Shelf Label

My shelves are 1inch (25.4mm) but inside the snap part is only 1/2inch (12.7mm) so I had to remix the other closet maid label. However, I decided to just make this flush - for easier printing and so it looks better - hides more of the…

Downloads
180
Likes
27
Rating
5
P
PrintablesBen Berry

ClosetMaid 3-wire Clothing Shelf End Cap

The ClosetMaid shelving that was installed in our house uses a third wire that the clothes hangers can slide on. That bottom wire relies on the end caps to support the weight and stop clothes from sliding off the end. We reconfigured our…

Downloads
179
Likes
26
Rating
5
P
Printablesaiannazzone

Sliding Closet Door Guide - XL

We have an old house, and the standard sliding closet door guides weren't tall or wide enough for our oddly-sized closet opening. This one follows the same profile, but is both taller and wider to keep the doors from getting stuck or…

Downloads
177
Likes
39
Rating
5
P
PrintablesZwono

Closet pole/rod socket replacement

Have you had a apartment or home where the closet rod socket broke? crazy frustrating and you can usually only buy pairs. well, now you can print just one! The opening is 1.38" or 35mm with a 0.2" or 4mm hole for a screw. It also includes…

Downloads
170
Likes
28
Rating
5
P
PrintablesBear Creek 3D

ClosetMaid Shelf Hangers

Needed a place to hang dog leashes, backpacks, laptop bags and the like. Zwoop's original design only fit on the front bar of my wire shelves so I decided a re-mix was in order. Will fit other brands of wire shelving, see notes below.…

Downloads
168
Likes
48
Rating
0
P
PrintablesCupertinoGeek

Closet Shelving Wall Clips

Compare to the Closet Maid Clips. Similar to their clips. Designed and made due to several of ours getting brittle. Please Like and Post your Makes. Much Appreciated!! Infill: Recommended 100% due to weight that can be placed on the clip…

Downloads
167
Likes
21
Rating
0
P
Printablesontopathogenic

Closet booknook

top holes for .115inch led glue and paint

Downloads
162
Likes
67
Rating
0
P
PrintablesGlen Robertson

Closet Door Knob

The old knob on my bi-fold closet door broke. I designed this to match the old one as closely as possible. The screw hole is 3mm in diameter. I printed this with 5 perimeters so it would be tough and the screw would have something to bite…

Downloads
162
Likes
19
Rating
5
P
PrintablesSpaceman 3D

Closet Divider

Closet divider - 2 inch hole - 4 inch diameter Made with PLA PLA Used - https://amzn.to/3RaWXFz

Downloads
161
Likes
25
Rating
5
P
PrintablesBad Robot Brain

Hook for Closet Hanging Bar

This simple hook is designed to allow you to hang items perpendicular to your closet hanging bar. The original purpose of this design was to allow me to hang my S/O's extensive decorative door art collection up on a closet bar. It works…

Downloads
158
Likes
25
Rating
5
P
PrintablesBob B

Closet Space Savers

You've probably already seen something like this on TV. You can easily chain multiple hangers together to save space on the pole in your closet. I wasn't about to buy these so I whipped up my own design and printed them out. They work…

Downloads
158
Likes
27
Rating
5
P
Printablesclaurita24

1.5" Closet Rod Hanger

1.5" Closet rod hanger. Actual ID is 1.44", but should work on 1.5" closet rods.

Downloads
157
Likes
26
Rating
0
P
PrintablesCalicat

Closet / Wardrobe Rod Mounting Brackets / Flanges - 1", 1 1⁄4", 1 3⁄8" (3 sizes)

Brackets are in pairs, each one a mirror of it's partner so they can be installed with the lock-screw hidden on the backside. Printed in ABS, 3 walls, 15% infill, no support needed. Using mine to mount a short closet rod (4') that will…

Downloads
153
Likes
16
Rating
0

Sliding Closet Door Guide

Current door guide fail on you? That white-plastic color not your groove? Upgrade your sliding closet doors with this durable and reliable door guide, designed specifically for 1 3/8" (1.375") thick doors. This guide ensures smooth…

Downloads
153
Likes
9
Rating
0
P
PrintablesFiveAngle

1/2" EMT pipe closet door shoe rack brackets

*UPDATE 2017apr26: the girl said they didn't fit her dainty shoes, so I dropped to 82mm (from 92mm) and put a covering of 1/2" copper water pipe insulation as a cushion and she loves it. As a test I put my shoes in and they fit fine too,…

Downloads
153
Likes
46
Rating
0
P
PrintablesPrinter Wizard

Extendable Modular Shoe Holder for Closet

A modular shoe holder for a closet. Print multiple and use like a hanging vine holder!

Downloads
152
Likes
90
Rating
5
P
PrintablesRobert

Barbie closet hangers

Simple hangers for closets of Barbie

Downloads
152
Likes
28
Rating
0
P
PrintablesActionBowman

Closet Rod S-Hook - Fully parameterized! (Fusion 360)

Just some handy hooks to hang things on closet rods- Enjoy parameterizing to meet your needs for that satisfying SNAP when you clip them on! You can control the angle of each opening, tolerance, thickness, etc. These are sufficiently…

Downloads
150
Likes
13
Rating
5
P
PrintablesCB

Closet Rod Spool Hanger System for 4+ spools

This is a spool holder system that hangs from a curtain rod, and allows you to hang multiple spools in the same space. Print one “Curtain Rod” version, and then one or more “Daisy Chain” versions to hang below it. It slips on into place…

Downloads
145
Likes
20
Rating
0
P
PrintablesLeah Konapelsky

Closet maid wire shelf hook

This hook was designed for closet maid wire shelving in closets. Check the diameter of your top and bottom wire, these are designed to fit the bigger version which is 8mm. (I know there are some for pantries and hallway closets that are…

Downloads
144
Likes
32
Rating
5
P
PrintablesNick Danger

Slot Sliding Closet Door Guide

Built custom sliding barn doors using purchased hardware. This came with little door guides that run in a slot on the bottom of the door. Once installed I realized the doors could have been closer to the floor and thus closer to the…

Downloads
143
Likes
12
Rating
5
P
PrintablesAlexander

Closet Rod Support Bracket

This closet rod was designed to support a closet rod at the distance from the back wall that would solidly support a variety of sizes of filament spools. I printed it quite solidly, with 6 walls, and 25% infill. It seems to work quite…

Downloads
142
Likes
19
Rating
0
P
PrintablesKai

Dorm Furniture Hooks - Bed and Closet

These space saving hooks slide onto your dorm furniture to provide extra points to hang items. For long term storage of heavy items, PETG is recommended, but for all other cases PLA should work just fine. These hooks are sized for UC…

Downloads
138
Likes
25
Rating
5
P
PrintablesAlex Hirsch
Downloads
137
Likes
52
Rating
0
P
PrintablesKytor

Closet Backpack Hanger

A closet hanger for a typical backpack. Printing: Print in PETG or PC. Note: PLA, ABS, ASA are not recommended. 0.4mm nozzle, 0.2mm height, 6 walls, 25%+ infill Supports needed for the flat part of the overhang (see 3mf) Assembly: None…

Downloads
135
Likes
55
Rating
5
P
PrintablesTallat Mehmood

Clothes Hanger Hook | Space Saving Closet Organizer

A minimal cascading hanger hook designed to maximize closet space by vertically stacking multiple clothes hangers. The hook attaches directly to a standard clothes hanger and allows another hanger to hang below it, creating a clean…

Downloads
135
Likes
49
Rating
0
P
PrintablesDustpan95

Closet Hanger Rod Holder

Closet Rod Support Set for 1″ Nominal Pipe — Reinforced End Sockets & 13″ Center Bracket A coordinated set of printable brackets for building a closet hanging rod from galvanized steel pipe. The design combines reinforced end mounts with…

Downloads
131
Likes
63
Rating
0
P
Printables7ZL

Minimalist Luxury Wood Belt Hanger - Space Saving Closet Organizer

Features Space-Saving: Vertical stacking keeps your closet clutter-free. Easy Access: Open slots for quick selection and storage. Sturdy Design: Optimized thickness to support the weight of heavy leather buckles. Modern Aesthetic: Looks…

Downloads
130
Likes
18
Rating
0
P
PrintablesBryce Nisly

Backpack Closet Hook Heavy Duty for 35mm rod

Recommended to print with 3+ walls for extra strength depending on the size of bag you wish to hang.

Downloads
129
Likes
28
Rating
5
P
PrintablesRamon Gutierrez

Boxes for IKEA PAX Closet Drawer

Here is a set with it of 53 cm x 15cm. You can print the 3 boxes and stick them together. It fits more perfectly as a sock organizer for your Ikea closet drawer. For the perfect Fit - just print 2x Big Box and 1x Small Box. After That you…

Downloads
125
Likes
27
Rating
0