37 models
A mount for the Cloudray Ruida 6442S Panel, to be mounted in front of the Omtech Polar laser cutter. I mounted it with Alien tape, so it has an indent in the back to hide part of the gap. If you plan to use something thinner than 1mm to…
This duct can be used with fiber lasers with threaded bases. The mounting holes span between 100mm and 112mm. It works great on Cloudray and Gweike fiber lasers. It adapts to a quick-disconnect duct. The magnets are 12mm x 8mm N52. They…
Diese ist ein Halter um einen Kreuzlaser mit einem Durchmesser von 12mm an einem Cloudray Laserkopf aus der K Serie zu Montieren. Die idee stammt von raptor_demon ich habe es aber neu gezeichnet und die Masse angepasst an Cloudray.…
This is V2 with 20mm Mounting Hole Distance for the new Cloudray K40 Laser Head with FL 25.4mm and FL 50,8 mm. It fits to my K40 Laser X Axis Carriage Base. K40 Laser X Axis Carriage Base von EinfachUli | Kostenloses STL-Modell…
Please see Head mount and Sled mount V2 version for longer and lower head adjustments and easier access to screws. The original one was to tight to allow adjustment without having to take the head off, I basically redrew to make it easier…
Simple mount for the Cloudray Ruida 6442S Panel. The bottom can be adhered to a surface using hook and loop tape, double sided tape or other means; I use scotch extremely strong. Print with supports and brim to create bigger first layer…
K40 Adapter for mirror 1 of Cloudray CO2 Laser Head Set, directly mounted before the laser tube, see here: https://www.amazon.de/gp/product/B07P1YLR2T/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 My K40 is a newer one, the holes in…
Umbau vom K40 um von den ollen Rollen an der X Achse weg zu kommen. Hier das fertige Teil im Einsatz https://youtu.be/SnZauEWrpfU Dazu habe ich mir diese Schienen MGN12H länge 400mm bei ebay bestellt. Gibt es aber auch bei Amazon .…
FR Supports permettant d'installer une cible pour le réglage optimum du faisceau laser sur une graveuse CO² disposant de supports miroirs et têtes Cloudray. Vous trouverez les fichiers stl ainsi que les fichiers pour imprimer une cible…
3D printable laser head mount for K40 lasers and Cloudray K-Series laser head. Allows adjustment in all directions. Also allows attaching a cable rail. Light weight and all screw holes fit...
Mount to attach red dot 12mm aiming laser to Cloudray 24mm C-series lensetube https://de.aliexpress.com/item/32946128276 Works with both short engraving nozzle https://de.aliexpress.com/item/33038635961.html and also long cutting nozzle…
This is actually not a remix but an add on for the K40 cloudray head mount with and without chainmount. It works well for a focal distance of 50.8mm and the assembly does not interfere with any inner machine parts. OpenSCAD file included…
Old 10mm laser melted in a fire, and I could only buy 12mm lasers on Amazon. Really simple to print. I used PETG and retained the original screw to hold it in.
This is V1 with 19mm Mounting Hole Distance for the old Cloudray K40 Laser Head with only ne FL 50,8 mm It fits to my K40 Laser X Axis Carriage Base. K40 Laser X Axis Carriage Base von EinfachUli | Kostenloses STL-Modell herunterladen |…
J'ai imprimé en PETG à 0.2 et 40% de remplissage giroïde.
This is a Model of the new Cloudray Typ K 4060 V2 Laserhead. If you need help, have questions or want to collaborate, please feel free to join my discord server: https://discord.vr6syncro.de If you want to support me or thank me you can…
Simple mount for Cloudray K series Laser head to a k40 with a MGN9H Linear Rail. Done as somewhat of a mashup of upgrades between the new head and this linear rail upgrade (of which the spacer is stolen from):…
This is mount can be printed either with or without two WAGA connector mounts for easy connection/disconnection. The body of the mount has holes that line up with the screws on the sensor body so you need to replace the screws that come…
I needed to mount the flow sensor for my laser cutter. Designed for M5 button head bolts to mount on 2020 or 4020 extruded aluminum to securely hold the sensor. The base simply cradles the sensor and mounts to frame. To connect the back,…
Easily use paper targets to align mirros on Cloudray laser head and mirror assembly ( https://www.amazon.com/dp/B07NXQ7SVK ). It's made in two parts that sandwich the paper inbetween, this allows for accurate centering of the paper target…
Adapter plate for my K40's original mirror mounting holes and the CloudRay laser head and mirror kit ( https://www.amazon.com/dp/B07NXQ7SVK )
Cloudray's K Series laserhead's 3d printed mount for K40W laser cutter. 2 x (25mm x 3mm) bolts are needed. i have also included a 3rd drill hole for mounting my laser pointer which is still W.I.P. About 40min print time with…
Alignment package for co2 laser cutters with cloudray c-series head. ********If you are doing this on a FF Y-1200 laser or Y-400 substitute every time I reference the x axis with the y axis and vice versa because they are flip flopped.…
This is a simple, parametric gauge block to set laser focusing distance for cutting and engraving material on CO2 lasers. It supports material thicknesses from 0mm (for engraving) to 6mm (~¼"), with each height labeled on the block. the…
Ich baue meinen K40 auf den ReplicantFx Mod um. Ich habe aber ein CloudRay Linsenhalter und Spiegel System. Die Teile habe ich mir soweit möglich rausgemessen. Keine Garantie auf Präzision, da ich zum Zeitpunkt des Uploads noch nicht…
FR Support permettant d'installer 2 leds sur une tête laser Cloudray pour faire un centrage précis quelle que soit l'épaisseur du matériel travaillé. Vidéo d'installation et d'utilisation ENG Support allowing to install 2 leds on a…
I printed it with a 0.25 mm nozzle. I didn't try it with other nozzles. For mirror brackets with 6 mm hole spacing. Material: 2x –> M2 x 10 1x –> M4 x 8 up to M4 x 20 (All screw lengths in between are possible) Assembly: Print…
This is a simple part which helps align the new Cloudray protective cover and makes installing and removing it much easier. This simply attaches on the underside of the marking platform and aligns with the side panels of the enclosure.…
Pressure-fitted laser head to laser tube adaptor. It was useful for my case, where I am making a rotary laser cutter. In this case, the tube is positioned directly, instead of working with a mirror setup. The easiest way to align the head…
The build guide uses a standard 2nd mirror on a custom bracket he made that takes the place of a 1st mirror. I wanted to use a beam combiner instead of one of those cheap laser pointer guides that hangs of the side of the laser cutting…
When using the Cloudray mirror and laserhead set, the nozzle of the head can run into the protection baffle for the Y-axis motorshaft. This simple clipon spacer prevents the head from running into the baffle. Just put it between the…
I made this so to help with K40 mirror alignement with a Sightmark 40S&W laser boresight (https://www.amazon.com/Sightmark-380-ACP-Pistol-Boresight/dp/B001C3Q9BI ) with the Cloudray Laser Head ( https://www.amazon.com/dp/B07NXQ7SVK ).
I made an enclosure for my fiber laser and I have changed all of my lenses to the Cloudray F-Theta lenses. I wanted a way to keep the lens cover handy, so I modeled a simple holder for them. I mounted this to the front of the enclosure,…
I made an enclosure for my fiber laser and I have changed all of my lenses to the Cloudray F-Theta lenses. I wanted a way to keep the lens cover handy, so I modeled a simple holder for them. I mounted this to the front of the enclosure,…
Adapter plate for my K40's original mirror mounting holes and the CloudRay laser head and mirror kit ( https://www.amazon.com/dp/B07NXQ7SVK )
I made this so to help with K40 mirror alignement with a Sightmark 40S&W laser boresight (https://www.amazon.com/Sightmark-380-ACP-Pistol-Boresight/dp/B001C3Q9BI ) with the Cloudray Laser Head ( https://www.amazon.com/dp/B07NXQ7SVK ).
Easily use paper targets to align mirros on Cloudray laser head and mirror assembly ( https://www.amazon.com/dp/B07NXQ7SVK ). It's made in two parts that sandwich the paper inbetween, this allows for accurate centering of the paper target…
