Search results: cmf

Sort order

533 models

P
PrintablesCMF by Nothing

CMF Phone 2 Pro - Universal Cover

Official Universal Cover models for use with CMF Phone 2 Pro. The part is attached to the rear of CMF Phone 2 Pro with 4 M2 screws and our Accessory Point Cover (M2.5). Find device dimensions, screw sizes and more uploaded to support your…

Downloads
4,049
Likes
374
Rating
3.83
P
PrintablesDan

CMF Watch Pro 2 Charging Dock

Update: 26.07.2024 Added “cmf watch pro 2 stand 0,2mm” with a slightly larger opening for the connector. A charging Dock/Stand for the cmf watch pro 2 Printed at 0.2mm layer height in PLA. Tree supports used for overhangs. Not sure, if…

Downloads
2,116
Likes
162
Rating
4.6
P
PrintablesDaniil Danilov

CMF Watch Pro 2 Bezel

Since I lost the original bezel on the first day, I have designed a 3D printable replacement with different bezel styles: - Flat. The bezel is a flat surface with a sharp edge on the outer diameter - Fillet. Has a fillet on the outer…

Downloads
2,012
Likes
160
Rating
5
P
PrintablesEnDiMa_Designer

CMF Phone 1 - Screw and Official Case

11/07/2024 Corrected screw thread and added STEP file 10/07/2024 Added STEP file of the official Case Freely printable cover of the CMF Phone1 smartphone where I also added the screw at the bottom right. It can be used to create…

Downloads
1,269
Likes
35
Rating
0
P
PrintablesCMF by Nothing

CMF Phone 1 - Back Cover

This is an original file of the 'basic' back cover of CMF Phone 1 and is optimised for printing. Buttons, camera surround, SIM tray and Accessory Point Cover are not included in the file. Please do not use any Nothing trademark, logos or…

Downloads
1,239
Likes
114
Rating
4
P
PrintablesBa St

cmf watch pro 2 magnetic charger stand / mount

I would like to share my magnetic charging station for the cmf watch pro 2 with you. The model is very easy to print without supports. Assembly instructions: 1. Lead the cable through the base part. 2. Position the cable with the magnetic…

Downloads
821
Likes
121
Rating
5
P
Printables3D KIMBA

CMF RIG PRO – Magnetic Camera Cage for CMF Phone 2 PRO

After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…

Downloads
781
Likes
704
Rating
5
P
Printablesdaniswidi

Nothing/CMF watch 2 Pro charging dock/stand

Nothing/CMF watch 2 Pro charging dock/stand

Downloads
769
Likes
89
Rating
4.5
P

LEGO Collectable Minifigures CMF Display Stand [last update 22.08.2023]

Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…

Downloads
754
Likes
161
Rating
5
P
PrintablesAndres Diaz

CMF Watch Pro 3 Charging Dock

This is the remix from the original model to make the dock work with the CMF Watch Pro 3 :) Very few supports are needed (you can import the 3MF into your Slicer so that it opens up with the supports already painted): You can print it in…

Downloads
655
Likes
39
Rating
5
P
Printablesulmerkotten

CMF Watch Pro 2 charging stand

Charging stand for CMF Watch Pro 2. Wire is hidden within the model. Print with organic supports.

Downloads
612
Likes
57
Rating
5
P
PrintablesGRZ Design

Phone Stand CMF Phone 2 PRO PRINT IN PLACE

This time, I'm bringing you a stand for the CMF Phone 2 PRO , which can be attached to the phone with its own screws. It's a "print in place" design that allows for color matching by printing the system's internal parts separately. It…

Downloads
589
Likes
215
Rating
3
P
PrintablesBobaFett00123

Lego Animal minifigure heads. sonic, looney toons, cmf

Feel free to ask questions, I have plenty of more Lego files on my profile. Please leave a like! :)

Downloads
534
Likes
56
Rating
3
P
Printablesokuyuki

Official CMF Phone 1 back cover

Original design of the back cover from CMF Phone 1. Includes STL and STEP files.

Downloads
506
Likes
28
Rating
0
P
Printablesstina

CMF watch pro charging dock

CMF watch pro charging dock. so no more ugly cable in you watch

Downloads
466
Likes
48
Rating
5
P
PrintablesMartinS

Nothing CMF Phone Replacement Thumb Screw

Have you lost your thumbscrew from your CMF phone? Need a longer thread for a panel / case? This model is 2 parts, and requires a bolt and some superglue. Bolt required: M2.5 x 5mm CSK - For standard replacement M2.5 x 6mm CSK - for use…

Downloads
457
Likes
13
Rating
0
P

Modular CMF Phone 2 Pro Case + Accessory Set with Microscope Lens

CMF Phone 2 Pro + CASE by Jon Prado Follow me, leave a comment or message me for Design Requests/Add-ons to this project or to collaborate. The inspiration behind the Design is a focus on Self Expression, Modularity and Utility. About the…

Downloads
438
Likes
64
Rating
0
P
PrintablesKamidh

CMF Phone 1 Screw

Just a little screw for your CMF Phone 1 by Nothing. Use for many colors and custom your Phone 1.

Downloads
398
Likes
26
Rating
4
P
PrintablesMangoMan

CMF Buds Pro 2 Case

A case made for the CMF Buds pro 2 Very simple print, supports are only needed for the overhang near the knob on the upper lid. Category: Audio

Downloads
388
Likes
42
Rating
5
P
PrintablesSalahGHamed

CMF Phone 1 by nothing back replacement

this is essentially the back of the phone which you can replace the OEM case with

Downloads
370
Likes
35
Rating
0
P
Printablespoly.dezin

CMF Buds Pro 2 Case/Cover

A custom case designed for CMF buds Pro 2, with features: A lanyard hole A belt clip - but not for belt Physical protection I took advantage of the texture of the plate and printed top and bottom faces towards plate. I will suggest you to…

Downloads
333
Likes
38
Rating
4.83
P
PrintablesZlobidloCZ

CMF Watch Pro 2 Modified stand

Modification of original model to get rid of small holes which prints horribly

Downloads
331
Likes
32
Rating
5
P
Printablesjosiahkeeler

cmf phone cyberdeck

Do you want to make your phone feel futuristic? Introducing the cmf cyberdeck! Featuring a full tactile keyboard and seamlessly integrated phone rail, this case turns your phone into a portable workstation. The phone case features 3mm…

Downloads
321
Likes
385
Rating
0
P
PrintablesAlvaro Marquez

Fidget Clicker for CMF Phone 2

Printed in 0.12mm layer line and works beautifuly, very clicky. You may need to pop the flaps of the bottom piece very gently with the fingernail or with an exacto knife. For the axel, I used a M2.5x8 screw that threads into the phone…

Downloads
305
Likes
75
Rating
0
P
PrintablesDnate

CMF Watch Pro Horizontal Charging Dock

A variation of W-Tex and Stina's docks, designed for those like me who want their watch to rest in an horizontal orientation so they can tuck the band behind like in the photo above. This also allows for a shorter and more compact dock…

Downloads
299
Likes
28
Rating
4.8
P
Printablesdarknesdragon

CMF Phone 2 Pro - integrated case on Universal Cover

I'm one of people who use phone case as phone protection, and when I saw CMF Phone 2 Pro, I search for information about using both case and universal cover, and found out that when using universal cover, it would be hard to use case, so…

Downloads
250
Likes
21
Rating
5
P
Printablesknoopx

Simple & Stable CMF Watch 2 Pro Stand

prints without supports in about an hour, face it backwards to your blower fan. charging port snaps into.

Downloads
243
Likes
23
Rating
5
P
PrintablesMartinS

CMF Phone 2 Pro - Printable Cover

The .stp model officially released by Nothing can be found here . This prints flat on it's back, with a small amount of support material required just for the holes. This version doesn't have the camera mounts. It is designed as a…

Downloads
237
Likes
21
Rating
4.67
P
PrintablesTobias Stanzel

CMF Phone 2 Pro - Fusion 360 - universal cover

I began designing my CMF Phone 2 Pro case based on the provided mesh. But it sucked hard ;) Bad performance and issues with the converted Object… Additionally, after test printing, I discovered that the large screw would not fit (it was…

Downloads
233
Likes
39
Rating
5
P
PrintablesWill

CMF Phone 2 Gaming Grips

Add comfort and ease of use to the CMF Phone 2 Pro with these easy to attach grips. Modeled to match the profile of a standard ps4 Dualsense controller, these grips will make gaming on your phone much more comfortable. Supports should be…

Downloads
216
Likes
117
Rating
4.5
P
PrintablesHomefab3d

Minimalist phone bumper, exoskeleton-style - CMF Phone 2 Pro, 3d printable

Description Let’s be honest: 3D-printed parts rarely match the flawless look of factory-made accessories— and they often add unnecessary weight, especially since manufacturers work hard to make phones as light as possible. That’s exactly…

Downloads
215
Likes
35
Rating
0
P
PrintablesAxeDavee

(17 Unique design!) I MAKE YOUR SUGGESTIONS! CMF-Phone PRO 2

CMF phone PRO 2 Texture kit. I have to thank everyone for sharing their ideas and suggestions! <3<3<3<3<3<3<3<3<3<3<3 Printing settings 45° printing angle 100% infill Support Tree(auto) Top Z distance 0.2mm Support/object xy distance…

Downloads
208
Likes
16
Rating
0

CMF Watch Pro 2 Case

Here is a printable CMF Watch Pro 2 Protector/Case You can find 2 models, one for a round ring and the other one for the flat one. I printed it on TPU, but I guess any material is good to go. Recommend a 0.12 layer height for quality at…

Downloads
198
Likes
29
Rating
0
P
Printablesszprusa

CMF Phone 1 case for TPU with FreeCAD file

I printed it with AzureFilm TPU 85A 0.2 layer height 0.4 nozzle Added some modifiers to the bottom of the case in slicer so the honeycomb infill is visible

Downloads
198
Likes
12
Rating
5
P

Fire Sword for LEGO CMF 29 71052 - Bionicle Tahu Cosplayer Minifigure | 57488 32558 Bionicle Weapon Toa Flame Sword 2 x 12 with 2 Pin Holes

The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…

Downloads
197
Likes
35
Rating
0
P
Printablesmygadgetlife

CMF by Nothing Watch Pro 2 Charging Puck

Just clip your magnetic CMF watch charger to get going.

Downloads
189
Likes
15
Rating
4
P
PrintablesPakkor

CMF Phone 2 Pro Quad Lock Cover and Phone Charm Hole

Created bold version of the cover which allowed me to nicely fit Quad Lock mounting. Also made variant compatible with original Mag Rings. Made add-on corner to which you can attatch phone charms. Corner as the ring can by fully…

Downloads
185
Likes
49
Rating
0
P
PrintablesBahnR

CMF Phone 2 Pro case

Update 28.05.2025 : Added a version with a hole to access the thump screw. Simple phone case for the CMF Phone 2 Pro with the universal cover on, for example this one . The phone with universal cover does not fit into the case that comes…

Downloads
177
Likes
32
Rating
0

CMF Phone 2 Pro Modular cover

My take on the CMF Phone 2 Pro back cover. I'm a graphic designer, so this is more of a design concept than a print-ready project — no printable files included, sorry! Take modularity to the next level with a fully swappable,…

Downloads
176
Likes
56
Rating
0
P
PrintablesPruzkumak

CMF Nothing buds case

Doesn't need any glue, you can slide it on/off pretty easily, but it won't fall off on it's own. Bottom case also has small hole for the led light. File includes 2 versions of bottom half of the case with and without hole for charging.…

Downloads
173
Likes
17
Rating
4.5
P

CMF VISREAL - VR Headset for CMF Phone 2 PRO

Inspired by the Google Cardboard,VR , this is a 3D Printable VR Glass Headset that fits to the CMF Phone Pro 2, making it possible to View Virtual Reality content. *Note you will have to purchase Two(2) Biconvex Lens Set, Pop-Tech Optical…

Downloads
171
Likes
47
Rating
0
P
Printablessidneylopsides

Optimised CMF Phone 2 Pro rear case+accessory disc+magsafe+lens mount

The supplied files for the universal case from CMF and Printables are a good starting point, but not fully designed for 3D printing, as they are modifications of the injection moulded part design. After lots of trial and error, I have…

Downloads
169
Likes
18
Rating
0
P
Printablesn8zrebiec

CMF Nothing Phone 1 Horizontal Stand

A portable horizontal stand that can easily attach to the back of the CMF Nothing Phone 1. Has holes for large screw as well as smaller screw for stability. The bracket should be printed in a rigid, durable material, but the legs should…

Downloads
155
Likes
22
Rating
0
P
PrintablesDirac Arts

CMF Phone 2 Pro - “Root Circuit” Cover

Root Circuit is a back cover concept that makes the invisible visible — transforming internal circuitry into bold, geometric design. The chip, proudly embossed with the "CMF by NOTHING" logo, serves as the visual and conceptual core of…

Downloads
152
Likes
62
Rating
0
P
PrintablesKoshiro

uB – Minimal Cover for CMF Phone 2 Pro

Current version: v0.1.0 The CMF Phone 2 Pro has a noticeable camera bump, which causes the phone to wobble when placed on a flat surface. To address this, this design adds small raised sections at the top and bottom of the phone to…

Downloads
149
Likes
20
Rating
5
P
PrintablesPokPok

CMF Buds Pro 2 Case

This is my custom design for a case for the CMF By Nothing Buds Pro 2. The case consists of two parts — a top and a bottom — due to the hinge design. While it’s not the most protective case, being quite thin, it does help guard against…

Downloads
147
Likes
17
Rating
5
P

Cute as Hell LEGO Bionicle Toa Mata Tahu Mini Box Can for CMF Tahu Cosplayer

YouTube Video - link This miniature version of the iconic 2001 BIONICLE canister is designed to perfectly match the new CMF Tahu Cosplayer. It's a fun display accessory that captures the nostalgic look of the original Toa Tahu packaging…

Downloads
141
Likes
30
Rating
5
P
PrintablesParadogo

CMF Phone 2 Credit card / ID card holder

Just a humble model of the biggest capacity wallet you can imagine! It holds your entire bank worth of cash!!!

Downloads
140
Likes
39
Rating
1
P
Printablessidneylopsides

CMF Phone 2 Pro generic threaded lens adapter

This is two parts - an lens mount insert that can use both the official CMF add-on lenses, but also generic ones that use a 17mm thread. Corner plate to attach the lens holder without using a full rear plate. The insert also works with my…

Downloads
139
Likes
33
Rating
5
P
PrintablesVader

CMF Watch Pro Charging Cradle

CMF Watch Pro Charging Cradle

Downloads
139
Likes
18
Rating
4.5
P
Printableskarmadon7

CMF phone 1 pokémon case

Customize your cmf phone 1 to your desired look! These modular pokémon sets will allow you to achieve the ultimate customization. Including: backplate screw phone stand With all the teams, pokéball and the gen 1 starters. Hope you'll…

Downloads
134
Likes
21
Rating
0
P
PrintablesMC🦊

CMF Buds Pro 2 case

The case is made of PLA, but it can easily be reproduced using other materials, although I recommend using rigid materials since the body and lid snap together. To open the lid, a slight force on the corners is required. Additionally,…

Downloads
130
Likes
10
Rating
0
P
PrintablesYousef alnasser

CMF BUDS 1 CASE

احم سماعات CMF BUDS 1 الخاصة بك بهذا المكان! تصميمها المتين تحافظ على سماعات الأذن الخاصة بك آمنة من الصدمات والخدوش. لا تفوت فرصة الحصول على سماعات الأذن الخاصة بك الآمنة!

Downloads
127
Likes
17
Rating
4.5
P
PrintablesEdward Patel

Phone Case for the cmf 1 by Nothing

I couldn't find a suitable case for my new cmf 1 phone. So I designed one and got to try out some TPU printing on my Voron 2.4. I printed 8 cases before settling on this version. It took a few tries to get good TPU settings and thickness…

Downloads
126
Likes
4
Rating
0
P
PrintablesSGR Ideations

CMF Watch 3 Pro Charging Stand/Dock

A minimalist watch stand designed for the CMF Watch 3 Pro. The form is inspired by the watch itself, with a profile that complements its aesthetics, creates an understated look when in use, and is pleasing to the eye whilst the watch is…

Downloads
124
Likes
16
Rating
0
P
PrintablesSatyr

CMF Buds Pro 2 Dock

It's simple dock for CMF Buds Pro 2 using OG USB-C cable. No supports, 0,2 layer For custom back use provided .3mf file, for different designs just change infill of inner part.

Downloads
118
Likes
28
Rating
0
P
PrintablesBobaFett00123

Lego Brick minifigure torso cmf

Feel free to ask questions, I have plenty of more Lego files on my profile. Please leave a like! :)

Downloads
118
Likes
11
Rating
0
P
PrintablesE3D_K3C

Cover case CMF Buds Pro 2

I am a motorcyclist and I created this cover for the CMF Buds Pro 2 case to take advantage of the case controls when I am on the move (answer calls, voice assistant, volume control, etc.). These headphones are really great for this…

Downloads
118
Likes
19
Rating
5
P
PrintablesNikul Patel

CMF Buds Pro 2 by Nothing Holder

I like to carry my Buds Pro 2 on my belt or sometimes I like to hook it to my back pack. I've made two different models with each of these uses: one for your pants to hook onto, and one that you can add a keyring to to hook it onto your…

Downloads
107
Likes
18
Rating
0
P
PrintablesSelasis

CMF Phone 2 Pro - Professional Camera Grip

CMF Phone 2 Pro - Professional Camera Grip The CMF Phone 2 Pro is the ultimate 3D-printed camera grip for smartphone photography enthusiasts and mobile content creators. Designed with comfort and performance in mind, this grip transforms…

Downloads
104
Likes
15
Rating
0
P
Printables3D Hedgehog

CMF Phone 2 Pro Ruler Case

This is a ruler on a phone case. It is great for drawing a straight line or… well, measuring stuff quickly without a ruler or tape measure. Print with supports. Preferably print in PETG or 95A TPU.

Downloads
89
Likes
46
Rating
0
P
PrintablesParadogo

CMF Phone 2 Pro Canon EF lens converter (for Macro)

Note that you cannot shoot with the extra lens like a normal camera. You can only use this as a macro lens! To use the camera, you will need to zoom a bit with your phone - otherwise, you will see a vignette. This simple model allows you…

Downloads
86
Likes
44
Rating
0
P
PrintablesSmelliot

CMF Phone 2 Pro - Camera Grip Accessory

This model is working but not completely finished! The latest version includes the following features: Hidden screw access via hinged lid & below view cutouts. Compatibility for CMF Lanyard. Compatibility for storing CMF Lens accessories.…

Downloads
81
Likes
58
Rating
0
P
PrintablesGlennovitS 3D

CMF Cheese Grater (Mac Pro inspired phone cover)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
80
Likes
26
Rating
0
P
PrintablesDendy

CMF Phone 1 Case

Case fo CMF Phone 1 with some octagon paterns

Downloads
79
Likes
4
Rating
0
P
PrintablesSigmaSS

Strap / Lanyard Joint for CMF Pro

This strap joint is designed for the CMF Phone series, including the CMF Phone 1 and CMF Phone 2 Pro. In the v1, the middle part was fixed, but in v2, it can now rotate freely. This makes the screw less likely to come loose. Printing…

Downloads
75
Likes
15
Rating
0

small Lanyard holder for CMF Phone 2 Pro

Tired of not being able to swing your new CMF Phone 2 Pro around? Not anymore! With the new lanyard holder attached to your phone you can do it! (Swinging of smartphone not recommended)

Downloads
75
Likes
9
Rating
0
P
PrintablesAshley Ball

CMF Phone 2 Pro retro controller fidget case

a back case for the cmf phone 2 pro designed based on retro controllers for video games with added pressable fidget buttons please note this hasn’t been printed or tested by me as of yet, if printed please comment to update

Downloads
73
Likes
33
Rating
0
P

CMF Watch Pro 2 Charging Dock with Fuzzy Skin and Improved Airflow

Modification of Dan's awesome CMF Watch Pro 2 charging dock, with a few changes: Removal of small holes: I'm not the first to do this! But here it is done cleanly, without cutting off the areas which hold the charging cable. No mesh…

Downloads
72
Likes
8
Rating
5
P
PrintablesPiArt

CMF Phone 2 Pro Credit Card Holder

CMF Phone 2 Pro card holder, containing space for up to 3 credit cards (or other card of your choice :) ) Simple design, allowing for easy removal of a single card, utilizing existing screw holes. Designed to be printed standing, on…

Downloads
71
Likes
15
Rating
0
P
Printablesszprusa

CMF Phone 1 case for TPU with FreeCAD file

I printed it with AzureFilm TPU 85A 0.2 layer height 0.4 nozzle Added some modifiers to the bottom of the case in slicer so the honeycomb infill is visible

Downloads
70
Likes
4
Rating
0

CMF Watch Pro 2 - Charger base

I designed this charger base for the CMF Watch Pro 2. Its advantage over other stands out there is that it allows you to roll the wire inside of it when it's not needed, since this watch only needs to recharge every few days or even…

Downloads
69
Likes
17
Rating
0
P
PrintablesEsZett

CMF Phone Quad Lock case

Work in Progress, i wait for my CMF Phone to try it out.

Downloads
68
Likes
7
Rating
0
P
PrintablesMaks

CMF Phone 2 Pro back cover with stand

CMF Phone 2 Pro back cover with stand

Downloads
68
Likes
29
Rating
0
P
PrintablesThat1RandomGuy

Phone wallet made for CMF Phone 1

Phone wallet for the CMF phone. Ive tried this and you need 2 of the M2X5 screws. NEVER TIGHTEN FULLY OR SCREEN MAY SHATTER!!!!!!!!!!!!!!!!!!

Downloads
67
Likes
5
Rating
0
P
PrintablesFor207

CMF buds 2 plus case cover

A "case case" for the cmf buds 2 plus by nothing. There isalso a version without the hole but it looks cooler with it in my opinion. Print with PLA with supports turned on (i used "supports for buildplate only" in prusa slicer).

Downloads
66
Likes
5
Rating
4
P
PrintablesArne Dirkx

CMF Phone 2 Pro Phone Case

The CMF Phone 2 Pro is a great phone but i created the best looking Case for it Based on the Nomad case for Iphone it has it Thicker Bezels and an additional bezel around the camera. I hope you guys find it also a nice model and print it…

Downloads
65
Likes
15
Rating
0
P
PrintablesThreud

Magnetic + Qi-Ready (Wireless charging) Add-on for CMF Phone 2 Pro

This is a custom backplate add-on designed for the CMF Phone 2 Pro. It allows you to add wireless charging using an external Qi-to-USB-C adapter (these are cheap and widely available online). In my build, I trimmed the foil surrounding…

Downloads
64
Likes
46
Rating
0
P
PrintablesMaster Gadget

CMF Phone 2 Pro 1 Axis Phone Gimbal

Always wanted to get buttery smooth videos but didn't want to break the bank for a gimbal. Introducing the CMF Smartphone Gimbal made for the CMF 2 pro. Designed to be affordable to build but have decent stabilization properties this is a…

Downloads
61
Likes
26
Rating
0
P
PrintablesSigmaSS

4 in nothing cover accessories CMF phone 2

landscape or vertical stand; bottle opener; lanyard; card holder for max 5 cards. To assembly the CMF 4 in nothing cover accessories you'll need some new screws: 1 countersunk head M2x20mm screw + 1 nut for the rotational junction of the…

Downloads
60
Likes
22
Rating
0
P
PrintablesDirac Arts

CMF Phone 2 Pro - Cyber SkullNode

Cyber SkullNode is my final submission for the CMF Phone 2 Pro back cover design contest — a bold departure from previous entries, blending aggressive aesthetics with technological precision. At the center, a biomechanical skull emerges…

Downloads
60
Likes
13
Rating
0
P
Printablessidneylopsides

CMF Phone 2 Pro add-on lens carry case

I noticed that if you buy these extra lenses, there's no way to carry them around with you, so I made a carry case. This case is designed to match the CMF buds cases, with a spinning dial to fidget with. It will also fit perfectly into a…

Downloads
59
Likes
40
Rating
0
P
PrintablesTharun Jaji

Swiss Army Phone 2 Pro | A multipurpose, pocket knife for CMF Phone 2 Pro

Swiss Army Phone 2 Pro is a custom multipurpose pocket knife for the CMF Phone 2 Pro . Built on the Universal Cover of the phone; the case is modified into layered parts to accommodate the multi purpose tools. Tools can be accessed using…

Downloads
57
Likes
94
Rating
0
P
PrintablesAGB

CMF Wallet

This slim wallet is purpose built for the CMF Phone . It attaches to the back with the provided bolt and the , and holds up to 3 cards, along with a clip for some cash. The model is designed to have small walls prevent the wallet from…

Downloads
56
Likes
5
Rating
0
P

Overlay Cover for CMF Phone 2 Pro

Elevate your CMF Phone 2 Pro's aesthetic with this meticulously crafted layered decorative underlay. Designed to fit seamlessly beneath the official silicone case, this accessory adds a personalized touch without compromising the phone's…

Downloads
55
Likes
26
Rating
0
P
PrintablesDoModel

CMF Phone 2 Pro Tactile Dragon Cover

CMF Phone 2 Pro case accessory with a tactile dragon shape. I've always enjoyed tracing the edges of a shape while holding a phone, so if I had a CMF Phone 2 Pro, I'd probably print something like this for it. The design is simple and…

Downloads
55
Likes
4
Rating
0
P
PrintablesJames

CMF Phone 2 Pro QuadLock Universal Cover

A simple version of the Quad Lock mount for use with the CMF Phone Pro 2

Downloads
55
Likes
5
Rating
0
P
PrintablesGlennovitS 3D

CMF Blueprint Case (incl. ruler for measuring!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
55
Likes
26
Rating
0
P
PrintablesDeAuthen

CMF Buds Pro 2 Holder for Ikea Skadis (No Screws)

Make sure you have supports enabled so the hooks can print! The fit on the hooks is a little tight so you might have to sand them down a tad depending on your printer Also if you do print it don't forget to upload a make!

Downloads
54
Likes
11
Rating
5
P
PrintablesMaster Gadget
Downloads
54
Likes
4
Rating
0
P
PrintablesNOu

CMF Buds Holder for IKEA Skådis (Buds / Buds 2 / Buds 2 Pro)

This is a minimalistic, perfectly sized holder for CMF Buds, CMF Buds 2, and CMF Buds 2 Pro. Designed as a small, open basket with easy front access for quick grabbing or docking. The holder is made specifically to fit the IKEA Skådis…

Downloads
53
Likes
5
Rating
0
P
PrintablesNicolai clausen

fidget spinner for screw CMF Phone 1

a small fun one with a fidget spinner for screw CMF Phone 1

Downloads
53
Likes
7
Rating
0
P
Printablesjberthing

HaniMandl Servo Mount and Arm for CMF Honey Tank

The servo mount is adapted to the CMF honey tank, with 74mm between the mounting bolts. Likewise the servo arm is modified to avoid drilling in the valve arm. Please download the servo gear from…

Downloads
52
Likes
3
Rating
0
P
PrintablesPottiii

OrbitFlex MagSafe Cover — Snap, Charge & Mount Your CMF Phone 2

Turn your CMF Phone 2 into a MagSafe powerhouse with one print. OrbitFlex drops straight onto the official Universal Cover, adds an ultra-thin N52 magnet ring, and keeps the Nothing aesthetic alive with clean, screw-through styling. Snap…

Downloads
51
Likes
19
Rating
0
P
PrintablesPopandsicle

CMF Phone 2 Pro Sharpie Holster Back Cover

Do you think a phone cover with a built in Sharpie holster is a dumb idea? That's fair, but you're wrong and we can't be friends. If a Sharpie is one of your everyday carry essentials, there's a good chance you'll appreciate this design.…

Downloads
51
Likes
25
Rating
0
P
PrintablesDirac Arts

CMF Phone 2 Pro - Prehistoric Protection

This 3D-printed case for the CMF Phone 2 Pro appears to be a relic from a lost age—its surface sculpted like a fractured stone wall, inspired by primitive construction and natural erosion. The rough, tactile texture mimics cracked rock…

Downloads
51
Likes
20
Rating
0
P

BattleGrip: CMF Phone 2 Pro Case with Hand Grip for Gaming

Updraged CMF Phone 2 Pro Case with Hand Grip for Gaming

Downloads
51
Likes
23
Rating
0
P
PrintablesBIPTOA

Skadis holder for CMF Buds Pro 2 by Nothing

I made place to put my CMF Buds Pro 2 on skadis board so stop putting them everywher. It's my first time using T-nuts by @6d6178 and trying to make something more complicated. If you have any ideas how to improve it let me know.

Downloads
51
Likes
18
Rating
5

CMF Phone 2 Pro overly

A Simple customized overlay for the CMF Phone 2 Pro

Downloads
49
Likes
27
Rating
0
P
Printableswaskito widya

CMF Phone 2 Pro - Multifunction Grip

This multifunctional grip can be used for many purposes. This grip can help users take photos or videos steadily, play games comfortably, and hold the phone ergonomically. It is not an ordinary grip, it can be used as a portable charger.…

Downloads
47
Likes
51
Rating
0