79 models
Inspired in the new Ortofon Concorde MK2 model. Use the model with guide if you can, depends on if the broken finger lift has left a hole.
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Print your own 1:492 scale model of the legendary Concorde, the world’s first supersonic passenger jet. Capable of cruising at Mach 2.04, the Concorde could fly from New York to London in under 3.5 hours, cutting typical flight times in…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Model description Concorde was the first commercial supersonic passenger airplane, built jointly by aircraft manufacturers in Great Britain and France. From 1976 to 2003, it halved the time it took to cross the Atlantic Ocean by flying at…
The Concorde was a supersonic airliner that was produced by British Aircraft Corporation and Aerospatiale. It was introduced in 1976 and was used for 25 years by British Airways and Air France, until July 25, 2000, when a Concorde ran…
A wall mount for the lego concorde. This will present the concorde with the following angles. Rotated 45 degress on the Roll axis. Rotated 15 degress on the Pitch axis. Rotated -10 degrees on the Yaw axis.
The Concorrde airplane model with stand. Length 42cm, span 17,5cm (after size reduction 85%). Print instructions Infill of airplaine parts 5%, stand 100% for weight balance. Layer height 0.1mm. Supports recommended.
A simple wall mount for the Lego Concorde Simply hang the mount with 4 standard wood screws and enjoy the beautiful Concorde Print settings: 5 perimeters 40-50% infill ABS+ Filament
A flat wall mount for the Lego Concorde set (10318). The pin is angled so the Concorde won't slide of the mount. Fixed using countersunk 3,5x20mm screws.
Printed with Prusa PLA at 0.15mm and vase mode
The Concorde, a supersonic aircraft developed by the British Aircraft Corporation and French Aérospatiale, first took flight in 1969 and entered commercial service in 1976. Capable of reaching speeds over 2.2 Mach, it halved the typical…
After building the LEGO Concorde, I had nowhere to put it. At just over a meter long, it needed to go on the wall. So, I designed this mount to both get it off of the table, and to display it at a dynamic angle where you are able to…
This is a Wallmount for the LEGO Concorde. Screw holes are 4.5mm diameter. Nothing else needed to mount. Around 15% infill is enough.
Wallart of legendary Concorde. Single piece verison, scaled to fit Mk3 printer. Also included is original scale file.
Large version of my Concorde wallart. Precut to fit Mk3 sized printers, can be scaled up or down acording to your printer size. Included is original size 3mf file.
This is a 1:1 scale of a British Aircraft Corporation Concorde Super Sonic Jet. You might want to scale it down substantially before printing unless you have a printer big enough.
Concorde, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Planes collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
Wanted a lay&play type set-up that was also shake/transport proof, assuming the lid is secured or unable to easily come off. Every piece uses other cards/boards as lids to the container, which I am very happy with. I've taken the game box…
Print in place Twin Concorde Flightcase Replacement – 3D Printable Model This 3D-printable replacement for the "Twin Concorde Flightcase" is designed to securely store and protect two Ortofon Concorde-style DJ cartridges. The case…
BAC Concorde wall art silhouette model. Adjustable size. I accept model suggestions.
Simplest wall hook, includes an expansion plate
First pass design of a vertical wall mount for the Lego Concord model I printed it with 15% gyroid infill, but can probably get away with less. I do recommend making the area around the mounting holes and the dove tail higher infill (I…
I always felt that Concordia, despite being the wonderful game that it is, is quite uninspired when it comes to its design. I don't care for the clunky meeples, and wanted to add some finesse and more of that ancient Roman empire vibe to…
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
Instead of using paper decals, I used plastic decals. The concorde model was done by CLERX. Please refer to https://www.printables.com/fr/model/341875-concorde-1144 for more details.
After Printing most of Drewlysses insert. it was very nice but didn't fit in the box the way I wanted (2 boards to fit flat) and couple other small tweaks. So I fired up inventor and redesigned the whole thing from scratch using…
Lego Concorde 10318 wall mount I only put 2 screws in main support no fixation needed for le head support
The Concorde was a supersonic passenger airplane developed by Britain and France. It first flew in 1969 and began commercial service in 1976. Known for its sleek design and incredible speed, the Concorde could fly at over twice the speed…
Ortofon Concorde MK2 fingerlift Print settings: Printed with PETG 0.10mm DETAIL No Brim/No support
I am a big fan of CLERX's Concorde model and have made a few. I really wanted one "on the ground" with snoot lowered. These are the stl files for the wheels and suspension. Front suspension is now a better scale. Main undercarriage…
If you like Concordia and need a place for alle the expantions This insert is the one for you, it will fit ALL the components in ONE box along with one board, the forum, and the fischmarket board. You will also need the Venus expansion,…
This mounts the Lego Concorde set 10318 flat to the wall
I recommend printing in PLA or PETG, 0.2 layer and 20% infill and 4 wall loops should do the job.
Remixed wall mount to have the plane nose towards the right Lego set 10318 4 perimeters 30% infill Gyroid patern used wood screws of 4mm used
If you want to print the model, I have attached it(use supports and lay it where engines touch baseplate) Use glue to bond the Concorde and the engines The wing has a surface to glue the engines to the wing, and use the vertical…
This is a LEGO technic themed wall mount for a LEGO Concord set. This video shows how it mounts This mounts with three screws.
hiya, this is my attempt at mdoeling the concorde. this does not require any assembly. I just made it to practice my aircraft modeling skills and to shake off my rust, same as my old post. and its main use is to be used as decor
A passenger plane that would travel at supersonic speed
Just designed yet another Xmas tree with a special look. Can be hanged or glued to some support. Can be customized by you as F3D files are included.
Orient this model diagonally so it will fit on an Ender 3 sized printer. This also causes the top layer lines to run lengthwise with the model. After printing remove the small tabs at the pointy ends. It wants to warp a little so wait…
A drink coaster that looks like a flower but with a hidden aviation theme! Who knew that a collection of Concorde's would make such a floral design. Files include a regular option with layered color changes and an MMU version, along with…
Concordia with Salsa box insert extras so the game can be stored vertically or carried without pieces shifting around. This is a remix from 2 different Concordia inserts. Lid: Place on top of Reverman's City box to keep the little squares…
This is a remix of combining Tvkili's money tray and Paprika's spacer to resize the compartments and have a solid plug in a single piece. Also, slight change to lid size for a tighter fit. Lid: Place on top of Reverman's City box to keep…
Lego Icons Concorde #10318 Remixed from DC3 Printed in PETG 75% infill
A stand for my Concorde and Tu-144 models. The stand reassambles the planes as they are on display at the Technikmuseum Sinsheim in Germany.
This is a flight case to hold two Ortofon Concorde MK2 style phono cartridges.
A plaque with a few stats about the Aerospatiale-BAC Concorde, a legendary plane that flew from 1969 to 2003.
For more information on how to build this project check out my website! https://www.bitsanddroids.com/diy-concorde-servo-panel/ Used in this project: Arduino Mega, provided by DFRobot go check them out over at:…
Inspired by the 1950's 3 flying ducks, wall art, I've created this simple silhouette of Concorde, for a slightly more modern take. The .stl is a single silhouette, the .3mf is 3, a small, med and large, as in the photo, all at 2mm…
I assembled LEGO 10318 Concorde without realizing the default height clips into the ceiling. This simple model angles it down to be shorter. The default orientation has it vertical requiring supports for strength with the front and back…
This is my entry for the 2024 3D Printing Industry Awards Trophy competition. The two parts are essentially the same shape with the metal one fitting into the larger 3d printed part and being able to rotate freely. This means the trophy…
Place it in your collection for the simplest concorde design
I have found that there are sold Ortofon Concorde Fingergrip 2 versions and i made them for printing. Just orient the detail for minimum support and print it.
just a display concord super sonic passenger jet
Mithilfe dieses 3D-Drucks lässt sich das Lego Concorde Modell in einem 45-Grad-Winkel an der Wand befestigen. Der 3D-Druck nutzt dafür die von Lego vorgesehene Aussparung, in welche auch der Lego Ständer passt. Die Befestigung erfolgt mit…
This set of tiles can be used to represent the train card in the Affair on the Concordant Express adventure or other train based adventures. You can use a wet erase marker to mark walls for the passenger car and other terrain for…
I remixed this insert to allow it to fit the Solitaria expansion as well. With this and the Concordia Venus box you can hold everything along with four maps. If you have the original Concordia base box only then you will likely be…
I wasn't satisfied with the Lego stand needed something smaller to put it on shelf Has been holding it for 2+ years great.
AMC Concord scale model stl for 3d printing, a civilian vehicle display model made for car fans, diorama builders, and model collectors. Print it to create a realistic roadside scene, shelf display, or tabletop prop for your automotive…
A 3D Model of the new CONCORD SKY building being constructed at Yonge and Gerrard based off architectural drawings. Pulled from the City of Toronto 3D Massing archive.
I wanted to maximize the available space for Concordia expansions/boards, make it easier to get started and have the option for vertical storage. I think this does it. It has individual player boxes with their start cards acting as a…
The amazing Concorde, but as a wall art!! Made to remember the legendery supersonic aircraft that changed transportation. Please comment for improvement!
I did not find a mount for my LEGO Concorde so I made my own. The print is in two parts both will fit in a standard 256x256. Required Hardware is one M3x40 (longer will do the job) and six wood screws, the mount was designed around…
As with all my other airplanes, I wanted my Concorde to have landing gear, not a stand, so I designed something simple to attach to the bottom of my model. Assembly The nose gear should be longer than it needs to be, so you will have to…
Concorde Supersonic is a detailed scale model STL for 3d printing of the civilian supersonic passenger aircraft, ideal for aviation enthusiasts, collectors, and display dioramas. Print it for desk or shelf decor, model aviation…
I know John hand-makes the boxes for these games so I feel bad. I just prefer the more snug deck box that was in the North and the West Kickstarters. I love the idea of the compass series but the boxes just were taking too much shelf…
Concord Sky is an architectural 3d printable model based on a real building or structure, designed for collectors searching for an architectural landmark model, building facade stl, or city skyline display piece. You can use it for a…
This is my entry for the 2024 3D Printing Industry Awards Trophy competition. The two parts are essentially the same shape with the metal one fitting into the larger 3d printed part and being able to rotate freely. This means the trophy…
Print in place Twin Concorde Flightcase Replacement – 3D Printable Model This 3D-printable replacement for the "Twin Concorde Flightcase" is designed to securely store and protect two Ortofon Concorde-style DJ cartridges. The case…
Mithilfe dieses 3D-Drucks lässt sich das Lego Concorde Modell in einem 45-Grad-Winkel an der Wand befestigen. Der 3D-Druck nutzt dafür die von Lego vorgesehene Aussparung, in welche auch der Lego Ständer passt. Die Befestigung erfolgt mit…
BAC Concorde wall art silhouette model. Adjustable size. I accept model suggestions.
I recommend printing in PLA or PETG, 0.2 layer and 20% infill and 4 wall loops should do the job.
Wallart of legendary Concorde. Single piece verison, scaled to fit Mk3 printer. Also included is original scale file.
