274 models
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
I really like to see the automatic Z correction doing it's job during prints. To see the tiny movements of the Z correction (Is it working? Is my bed level?), you can just clip this print to an unused part of the leadscrew. No tools or…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
On the original Prusacaster, the hardware is placed 1.4mm too far to the left, but two more options exist for the Harley Benton hardware. mrstolarsky made a great new core with the screw holes for the alternative hardware, plus the…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
I made my own first layer calibration with a bigger center square and horizontal infill and 45 degrees infill for the corner and side squares. This way you can easiely dial in your live z for the center and look at the difference early.…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
nice scan of a human skull. You can choose to print the skull in 3 parts and the jaw in 2 parts, print the skull in 1 piece and the jaw seperatly or print all at once. First try: i printed the skull in 3 parts to make it an easy(er) print…
An easy to print human skull cut into pieces that require minimal supports. If you print with snug supports on the build plate only then only a little of the underside of the nasal structure gets 'stringy' (above the roof of the mouth). I…
his is a digital 3D printable model of an Anatomically Correct Human Skull based on a scan . This accurate skull replica is a perfect Halloween decoration, or simply a wall decoration/shelf display, cosplay prop, headphone holder… The…
I simply took the STL file from the Prusa Knowledge Base and reworked it to fit the print bed size of the Prusa Mini. https://help.prusa3d.com/en/article/bed-level-correction_2267 Important Information about sheet markings FAQ Sheet…
Minecraft Creeper's head as keychain, correctly textured by using the original textures as height map. Multple versions available: -flatback keychain: easiest to print, model rotated face up and backside made flat to be placed on the…
Slice using your own settings. You should use the same settings that you would normally use when going for dimensionally accurate parts. Take 6 measurements and let the calculator do the rest. Use this calculator: link No need to request…
Made By DaveMakesStuff
I needed an accurate model of the Arduino UNO R4 WIFI , so I downloaded the STEP file from arduino.cc . To my surprise, the CAD model did not match my UNO R4 WIFI. The mounting holes were missing, the DC connector was slightly different…
Remeshed the model and properly corrected and shaped the neck to look properly part of the rest of the squid update: Added lower poly/smaller file sized versions for people with not so good computers/internet. They are all the same…
I noticed that left front corner of the bed was by ca. 0.8mm lower than the right corner. Since the bed levels mechanically against the bottom of the printer, there is an easy solution. :) How do you figure it out if the bed is lower on…
There are plenty of M49A2 rounds available but they are all incorrect in one way or another, I have done my best to make a round that is correct in size and detail to a real M49A2, I have designed this to be printed as a sold round, with…
An easy to print human skull cut into pieces that require minimal supports. If you print with snug supports on the build plate only then only a little of the underside of the nasal structure gets 'stringy' (above the roof of the mouth). I…
Bed Level Correction Calibration Model for the Prusa Mk3/S. Instructions how to calibrate, see: https://help.prusa3d.com/article/TPGip0OmaP-bed-level-correction
Anatomically correct HINGED Skull and Jaw because you and I both know you're going to make this thing talk like a puppet. Three stl's are here. 1 - hingedSkullAndJaw are meant to print in one piece. Untested but SHOULD work. If it doesnt…
Have you ever wanted to hold a human spine in your hands? (without dissecting any corpses?) I present to you... SPINE This is a flexible spine model I made for my chiropractor friend. It doesn't have any purpose aside from just being fun…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 DUMMY 13 is ideal for posing. However, not only are the hips/shoulders difficult to print and have to fit perfectly…
This human skull model can be used for learning anatomy or just freaking out your friends. See here for assembly video: https://youtu.be/dm0RT-1eFFc See here for stable download: https://thangs.com/mythangs/file/60036 To assemble with…
This is a remix of the HSW Flush cutters holders with the pin orientation flipped. The original model had the tapered end of the pin as the end that wasn't attaching to the honeycomb storage wall making it really difficult to insert. This…
Anatomically correct human skull lower jaw remix which joins both the top and bottom. The original which is by Peter from Belgium has the jaw split into two sections. I took the upper and lower jaw sections from his model, merged them and…
I noticed that on disser's excellent Radius Gauge, what was supposed to be a 15mm radius was actually closer to 13mm. This corrects that and puts it at 15. Everything else is the same, all credit goes to the original creator. Also check…
Once I printed XTRUD3D 's chain for the Flashforge Adventurer M5 I realized that the filament sensor could not work in the correct way. So I created this additional holder for the filament sensor. Placed vertically, the sensor maintains…
I am not the original designer, I just changed the thread from M10 to BSP 1/8" (the correct thread for P4 M10 connectors
After using a few sub-$100 usb c docks with my MacBook Pro (M1), I could not for the life of me get them to work correctly. I always had to plug / unplug multiple times, etc to get my external monitor to display anything. I don't wanna…
Ender 3 V3 SE 5015 Fan upgrade (corrected)
Anatomisch korrekter menschlicher Schädel, anatomically correct human skull
The official downloadable file found on Prusa site for printable LCD cover is actually for MK3 which has longer cutout window (85mm). For MK3S and MK3S+ it is only 80mm. See the attached photo for comparison.
I thought of creating of various sizes of toe spacer inserts for my Correct Toes spacers. I use them to help correct the natural shape of my foot due to wearing tight shoes growing up. They also help alleviate pain with Bunions and other…
No fighting over the Turkey's wishbone during this long-standing tradition. Also vegan Thanksgivings could 3D print this model to keep up with the tradition of breaking the wishbone. This anatomically-correct model 3D scanned by the…
Shield STL for RC3 was corrupted. Here is correct file.
Easy to print and assemble. Side part must be printed twice. No support needed. No postprocessing. No glue. Just plug it together. According to Norm UNE-EN 13698-1 Support & Feedback I share my designs purely for fun and don't make any…
I am making the Elucidator and I saw this and was like "a metal rod ?!?!?!?!" so here is a 100% 3d printable version using pegs and glue AND THE CORRECT SIZE! Overall Length: 42.25 Inches Blade Length: 30.25 Inches. Here is the Og…
Model is full/life size, with no anatomical abnormalities. Includes all structures superior to the distal brainstem. I printed it in 3 separate pieces and glued each together before acetone smoothing, priming, and painting. I then drilled…
.223Rem, 5.56x45 NATO
A mold to make a cast in the shape of an anatomically correct human brain (made using the MiloMi's model ), including instructions for making the mold and the gelatine cast (see the Post Printing section). An artist friend of mine needed…
Print two halves, slide a 3mm rod in and presto - you have a hinge. Mix and match lengths to get the desired size. It's helpful to print in pairs, less confusing that way. Use double sided tape to attach to surface, VHB tape works well (I…
This is for the card game Dominion, by Rio Grande Games. It's a large (~60cm in diameter) tray designed to be place on a "lazy susan" base so all players can spin the tray and reach all the cards easily. It can hold both sleeved and…
The original PDXCNC parametric project had base sizes that didn't follow the specification. This corrects those errors.
Have you ever wanted to display your array of action cameras on the Honeycomb Storage Wall? Well now you can, with this simple printed part, a GoPro screw and an M5 screw and of course a camera. Ingredient list: M5 Nut GoPro screw a GoPro…
[EN} Anatomically-correct model of an Esperanza bug. Legs were modeled thicker for printability. I recommend using brims to help legs adhesion to the print bed. .3mf file includes paint-on support to limit support on overhangs. If you're…
The original human nose model (STL) cannot be converted to a solid (in FreeCAD) as: The mesh contains two meshes: A big nose outside, and a smaller one inside (not visible) The smaller one has holes in the mesh (not tight) I split and…
Just reversed the base orientation of both anchors from the original model by Terrywood02
I swapped two racing circuits (Spain) on the model — they were reversed in the original version.
Bed Level Correction Bed Level Correction 175x175mm for Prusa Mini+ Korekce podložky pro Průša Mini+
Separated the ball connector and made it printable sideways so it doesn't break when you try to fit it. you just connect both parts after printing.
Easy to print. As an addon to my Euro Pallet https://www.printables.com/de/model/380553-euro-pallet-eur-1-epal-110-correct-sizes Normally they are stackable. This one is not. No support needed. No postprocessing. Have fun!
I added a file to the remixes where the whip is correct.
In a nutshell, I had the idea, wanted to check if somebody did it already. Bingo, but far too loose CAD (~2.1mm). I think mistake in updload: nearly all users had similar issue but not the creator. So I've redone an editable model under…
This is (another) remix for the updated/changed bridge within the Thomann / Harley Benton T-Style Kit. changed the hole pattern to fit the new bridge (3 holes) closed the existing 5 holes for the other bridge deepened the recess to 27mm…
Can be used with https://github.com/Kranex/goskew Slice first model so that diagonal is largest possible to be measured precisely. Mark printer's axis and coordinate origin on printed tabs before removing print from printer. The diagonal…
Funny Sign - "When a woman says "Correct me if I'm wrong", do not under any circumstances actually do it.", multi colour print, printed in ZIRO PLA Diamond Blue and Sunlu Matte white PLA. For more funny signs see my (growing) collection…
Print it on the edge to get a smoother result. To be sure that the print stick to the bed I added a raft.
Fire Pit No supports fixed the bottom so it prints flat
This is a version that can help you fine-tune the sometimes finicky extruder linearity correction. Please read carefully the knowledgebase article to check that you really need, or may be interested in, this kind of calibration that is…
Fixed the problem of not being able to reach the X axis switch
Now, this is just silly: this is a remix of a remix of a remix of the original design by Mikolas . Click the links to learn about who added what. — There are three known versions of the Harley Benton Thomann hardware: 5-screw hardware…
Does the x-gantry belt angle bother anyone else? Constantly variable belt tension. CVBT. Fixed. Theoretically, with a 3mm belt vertical offset, printing on the left of the bed vs middle only makes 0.0023% difference in the movement per…
Now, this is more than just silly: this is a remix of a remix of a remix of a remix of the original design by Mikolas . Click the links to learn about who added what. This remix includes 4x4.0mm holes for M3 threaded inserts for the side…
I corrected @ChrisBorge 's Open Ball Vise Index Plate so you don't have to.
D&D dice set, correctly scaled (+1mm for tolerances when 3d printing)
John's printbed mount is great, except that the screw hole isn't aligned correctly with the bed's bottom-right corner. I only included the modified bed mount and the original camera housing. For the ribbon chains and full instructions,…
This solar system was created at the correct scale so that the pupils could get a feel for the proportions in our solar system. I have also used the surface structures of the planets, which are only visible on the larger planets. You can…
if you need to edit something on the model, write to [email protected], if you don't want to redo it completely, I'll do it for free
Nozzle: 0.4 standard nozzle Supports: from the buildplate only Filament: PLA
Minor corrections to fix spokes and holes, increase capabilities, use built-in PI constant, typos, keyway location Category: Engineering
Please see the original model for background model and info on why this is still a BETA version. Here are 3 versions of the human clitoris/bulbo-clitoral organ: with the connective tissue “sleeve” (Albiguinea) of the Pars Cavernosus with…
This is just a quick remix of the awesome design from 0110-M-P. I corrected the size of the screw holes to mount the pi3 board (now 2.3 mm diameter which works fine with the M2.5 screws for the pi board). Aside from that, I refined the…
REPAIRED correct files loaded scaleable and easy to print
I left part of the abdomen deeper so that the fit with the fram would be better
With numbers which makes them easier to identify, especially at night. I printed my set from PETG, 4 perimeters, 100% infill. Might need a bit post processing to touch up any PETG stringing and smoothen the numbers.
Original knob would sink too deep on the pot so I made it more shallow so it can still click just fine. Looks identical to original. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20…
An anatomically correct skull with a hole to hold your pens, pencils, ect
This is a Pixel 4XL case I printed in NinjaFlex TPU. It's been remixed because the parent model's buttons were not in the correct location. Also the fillet on the bottom were too small and did not print well, because of this it felt sharp…
This model is a 1-1 model of my grandfathers right knee. This was created from his medical scans.
The STLs have been sent to Cura and then exported. I exported them as STL binaries, but also as 3MF files, use whichever you wish. The 3MF for the Chain Base Mount includes my setting overrides, which just turns off buildplate adhesion…
Easy to print. As an addon to my Euro pallet https://www.printables.com/de/model/380553-euro-pallet-eur-1-epal-110-correct-sizes Normally they are stackable. This one is not. No support needed. No postprocessing. Have fun!
Human skull and jaw, anatomically correct - verticall cut, both halves, 1:1 scale
it is basically 50x50 rectangle with walls on each corner to make it easier to measure Faster and easier to print from many other models Also it is easier to measure with calippers This model helps you only with X & Y axis in the design A…
A simple "do not disturb" sign, couldn't find one that I liked so I made one. Made it on Tinkercad very quickly, not perfect but it works :) Including a “do not distrub” variant cause I didn't notice the mispell until I printed it, when I…
This is a slight adjustment to the Z Axis motor mount I needed after installing the "Creality CR-10 Wire management, Strain relief and Glass holder" https://www.thingiverse.com/thing:2328449 which I found impacted the corner of the motoer…
This is a fully compatible replacement for a standard U.S. double outlet cover/plate. Not only is it compatible with the original outlet cover, it also works well with official Lego* mini-figures and/or bricks. The pieces snap in and stay…
This is a remix of Team Just Cuz Robotics @JstCuzRobotics_31323 's battery organizer tray, the only difference is it's properly scaled. I asked Team Just Cuz Robotics to scale it properly instead, but didn't get a response, so posted…
This thing enables you to use shorter belts in a printer with the traverse bar mounted on the lower side. This is a remix of https://www.thingiverse.com/thing:2782170 which is a remix of https://www.thingiverse.com/thing:2347849 Update…
This print is difficult to print so it's a good way to set live Z and then fine bed level correction value. First you have to clean you PEI : 1 clean towel with water and dishwasher 2 clean towel with water 3 clean towel with a little bit…
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models: https://www.printables.com/model/1024242-scream-duck
Starting from today, XingHai icreatori will be updated again. Thank you for your attention and liking.
The existing IKEA ALEX baseplates are not a great fit and require sanding or additional parts for proper fit without gaps. These should press in nicely. Files with +magnet in the name have slots for gluing magnets. I've used OpenSCAD with…
Changed thread pitch in FreeCAD from 2.5 mm to 5.0 mm for each helix so it matches conventional Luer Lock fittings.
Volkswagen Golf Keychain with correct font and logo I managed to find the font they use on the car emblem and create and svg from it then brought it into fusion 360 to model the keychain. Can print in one solid colour or ‘pause at layer’…
Prusa RC3 for dentists scaled to correct size and optimised for fast printing on the Prusa MK3s. License according to oringinal "Prusa RC3 for dentists" model by Man-X
Geometrical Correct Tetra Tower (Balance Game) I like the game but i see some designs where the inner walls and squares looks not identical after building some. And see surfaces get no tolerance to fit each other. Even the bought ones…
The original file is awesome - I just fixed the side we are expected to print on to be flat (Cura things its not). OP is welcome to just take this and replace his download if so desired. It's a minor fix I thought I'd share. Category: 3D…
Posture Corrector Yoga Cross Stick - Muscle Release Tool - Yoga Sticks - Stretching Tool - Giunzione Barre correttore Posturale Yoga Sticks Technical Specifications: Default Stick Diameter: 21mm Customizable: Easily resize/scale the 3D…
TEST Calibration Bed level Correction "compatible with all printers" Voir mon tutoriel ici => https://www.tiktok.com/@art3dchoix/video/7268707259251838240 Très simple tu agrandiras le fichier aux dimensions de ton plateau avec des…
(2021) Thingiverse seems to have destroyed / lost multiple additional stages of instructions and reference photos. I'm not sure it is worth recreating given the advances in automatic mesh bed leveling. Work-in-progress... would be…
There are probably a lot of Penrose tribars available for free dawnload. Unfortunately, I did not find a single one that was also executed perspectively correctly. All of them worked with various inaccuracies due to perspective…
![[Beta Version] Life sized human clitoris (anatomically correct)](https://media.printables.com/media/prints/567532/images/4543004_1d916d3e-5107-4a96-a5f0-6fc5450eab85/img_20230705_0212162.jpg)
