The source marked this model as adult content.
Print approx. €9.55–€11.67 excl. taxPreliminary estimate for one variant
- Downloads
- 708
- Likes
- 484
- Rating
- 5
507 models
The source marked this model as adult content.
Print approx. €9.55–€11.67 excl. taxPreliminary estimate for one variant
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Print approx. €16.29–€19.91 excl. taxPreliminary estimate for one variant
Lay down and relax on the couch with your remote, and it's slightly smaller couch. No supports required, scale for your remote size.
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for PETGSource material: PET
This single cupholder / bowl holder / remote holder / phone holder keeps everything you need within reach while chilling on the couch. Also works with Mugs! I printed in PLA & PETG with 3 perimeters, support cubic infill. If you decrease…
Print approx. €13.38–€16.35 excl. taxPreliminary estimate for one variant
I don't have a coffee table and I wanted something nice looking for my remotes that I could reach from the sofa. There was no design with the typical hexagon style, so I designed this myself. This little remote control holder rests nicely…
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for one variant
This a couch leg with a height of 95mm. The couchleg+modifier version I included, has more infill at the screwholes.
Print approx. €8.86–€10.83 excl. taxPreliminary estimate for one variant
Cerf Foret - 5 layers (modular) Dimension of a layer: 90x1mm Support spacing: 5mm between layers Layer 0: bi-color - yellow / black Cerf Foret - 5 couches (modulable) Dimension d'une couche : 90x1mm Support espacement : 5mm entre les…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
IMPORTANT NOTE: Please only use a flexible filament. I used an 89A Shore Hardness PLA from Ataraxia. If made of ridged PLA, PETG, ABS, etc., and the tuck comes partially out of position and is sticking out, it will will impale you. Trust…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for one variant
Materials: Orange Brown Gold White Black Red Blue Yellow You will need glue for assembly. Most parts simply fit into each other, but some are better glued. In the updated file, the sofa and some other parts have been redesigned for more…
We all love to lounge on the couch and scroll through our phones. Now you can take the couch with you and your phone has a cozy spot of its own to rest on. This stand features a groove to rest your phone in while being propped up by the…
The Controller Couch is a modular controller stand for XBox Series X controllers. It securely displays 1 to 4 (or more!) XSX gamepads. It features a finger well to easily move the stand, as well as a user-selectable accent color behind…
Customizable Couch Armrest Table with optional Tablet Holder First and foremost, this is an armrest table for various sizes and shapes of couch armrests. On top of that, I found it appealing to attach things to my sofa. So, with the…
Here is a nice cozy well-loved leather couch. It's like the one we all had growing up that was nice and broken in to the perfect level of comfortable. Recommended print settings Layer Height: 0.2mm or less No supports needed This is a…
This is a couch drawing board, to allow drawing or reading on the couch while giving places for drawing supplies and remotes. This larger version allows for couch arms bettween 210mm - 270mm / (~8.25 to 10.5 inches). The original covers…
Fold-out Couch/Sleeper Sofa with Decorative Throw Pillows Included are the following STL files for 3D printing: Couch Couch Right Cushion Couch Left Cushion Couch Small Throw Pillow Couch Large Throw Pillow 3D PRINTING SETTINGS Layer…
Simple nice looking model of a couch / sofa that is made in to a business card holder. It is made from two pieces that you are supposed to glue together. I printed it using two colours to add more life to it. Original version I remixed it…
Holds any plate/cup/bowl or other object on the table. Objects <25 mm thick can be stored in the side compartment. I use it for phones, remotes, chargers and snacks. Made two of these for my IKEA LANDSKRONA couch, however it should fit…
28.2.2026 - Update - add separated stl files. Split for smaler printer ie. plate 180x180mm. Recommended print with: Infill - Lightning - 25% perimeters 3 For Friends label: use Ironing on top layer color dot - cut filament to 3 mm and…
A lovely set of couch and chair for your dollhouse. These are the perfect subjects for testing fuzzy skin in the slicer. Designed by my father, for my niece. And we thought maybe someone else also could get some joy from these.
Introducing CouchBuddy, a modular system to have with you when on your couch. Made to hold your TV remove, phone, snacks, drinks, and many more. The modular set up let's you mix and match as much as you would like, so that you can set it…
I have seen various couch snack bars online, but none fit my need. This is why I built this modular version, which uses IKEA metal containers to keep it food-safe. All parts are connected by using dovetails. These are the IKEA products I…
Small Fold-out Couch/Sleeper Sofa Included are the following STL files for 3D printing: Small Couch Small Couch Right Cushion Small Couch Left Cushion 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill Prints in place,…
Here is some couch cup holders I made inspired by my sister in law, No Supports needed. These cup holders fit almost every couch and every crack. They also fit well in the corner and can be pushed together to make a double cup holder. I…
In my apartment, I've got an IKEA Kivik couch. I like to use my PC on my large TV from the couch. I've also got a lot of remotes laying around, and the occasion drink. I've got storage and use problems. I had a slim endtable on the side,…
Print without supports. Glue the legs.
Here is the famous couch from The Big Bang Theory ! (As a miniature, scale 1:12) I've added the usual two pillows but the pattern on the pillow are just part of the rendering. You can still print Sheldon's pillow in full colour by…
Tired of finding loose change in your couch cushions? Put your loose change in this couch instead. Needs supports
Lovesac Couch Cup Holder This was made for the Lovesac sactional set that has the standard-shaped sides (not the rolled arms). Print Settings I used 20% infill and supports with it being printed cup-hole-side down. Category: Household
Remix: Modified model to allow it to fill up the print bed! A foldable couch tray. Can be compactifyied into a roll in one direction, while keeping its form in the other. Can serve as a sushi mat as well. Print and Post-Processing…
So this was done for a friend. He has cup holders in his couch but wanted something that would hold a coffee mug. There's a lot of stuff in this category and chances are you'll just whip something up yourself to suit your own tastes. I…
Hey everyone! I’m thrilled to share a special new project with you—a 3D printable couch set that I originally designed for my daughter’s dollhouse! My daughter loves playing with her dolls and creating fun and imaginative scenes, so I…
I wanted to make a living room out of 3d made items, this is one of them. No supports needed
This is designed to raise our couch to accomodate our Dreame vacuum robot. Scale (only) the height in your slicer to adapt the heigth of the raiser. Includes a raise for the roller aswell. The raisers can also be stacked, should your…
Couch tray created to go between couch cushions with fin to help stabilize tray from tipping.
-Work in progress- My dog keeps losing her balls under the couch and whining for them. designed these to prevent that from happening. going to see if i need to increase the thickness. not sure if my dog will paw at it or not. Note that…
Printed Modular Tray & Organizer! It’s made up of three parts you can assemble in different ways, left or right-handed totally customizable to fit your needs. Has a removable pocket that’s perfect for holding books, phones, pens, or…
I designed this cup holder to fit in the gap between the couch cushions. on my couch it even fits between the cushion and the arm rest.
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) AIRPOD COUCH – A COZY HOME…
Minimalist three-seat sofa with soft rounded cushions, clean armrests, and tapered wooden legs.
The cup holders on my couch didn't really work with a coffee mug so I made an adapter that was less sketchy than just putting a coaster across them. Lower portion is 88mm in diameter upper is 100mm with 25mm walls to contain the mug.…
i made this for the competition, a Elegant Couch.
- Sits next to you on your couch - Holds a your phone, remote, a drink and snacks - Version 2 coming soon...
After constantly getting cat toys under my couch, I decided to make my own under-couch blocking system that looks decent. Due to some couch sag, I printed mine with some small supports that keep the system in place where the pieces don't…
Side table that fits onto the armrest of a couch or sofa with remote control slot and circular dip for a glass/cup.
Easy to make a Couch Potato keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
I needed that kind of nozzle to vacuum our sofa so here it is.
couchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouch
I printed this with PETG and made the walls thick but you can adjusted to however you need. The original leg height is 65mm, the one I created is 105mm, but you can use the Fusion360 file to adjust it to your likes. The original screw…
I needed that kind of nozzle to vacuum our sofa so here it is. I created nozzle model myself firstly for Xiaomi G20 Lite, since we no longer have this vacuum i had to remake it for our new vacuum. I used…
its a cute cute little couch I designed to give your prints a cozy place to sit.
Overview This is an adjustable riser for square legged couches. You can edit the size and height of the riser via parameters in the FCStd file. I found that for my couch, 88mm was enough for the leg to fit snugly in the riser without…
Barbie Couchtisch Barbie coffee table Category: Toy & Game Accessories
Couch table that is scaled to fit a 6 inch back or arm rest. Scale up or down to adjust for your own couch. Printed with PLA+ with 3 walls and 15% cubic infill. Printed on side with no supports.
Simple dollhouse or Squishmellow couch that measures 120mm long, 52mm deep, and 49.90mm tall. Fits two Squishmellows. I printed on Ender 3 Pro with Print Bed filament.
ahhh soft couch I can’t wait to sit on it
My couch has some cupholders which is nice except if I am using a coffee mug. The handle prevents the cup from fitting neatly and securely. So I use this insert to provide a secure spot for my coffee cups to fit. I designed this to fit my…
If you download the model, please don't forget to leave a like. Thank you! <3 Immerse yourself in the quiet comfort of companionship with this minimal line art 3D print, depicting a couple sitting together on a couch. The artwork uses…
Just wanted to make something different. Just your typical cat chilling on its own chair. I plan on coloring it and printing in mulitcolor but a solid white whit come markers will do the trick for now.
First layer test with 50mm^2 square for a 200mm^2 plate
This is a remix of my couch table with an extra slot to put the remote controls in and sections for mobile phone and any drinks. Made fit for my couch, but might fit for other models too. Print the arm twice and the table once. Attach the…
Okay I’ve probably well over-engineered this but she works beautifully ! Adjustable : mechanism locks in place to fit the width of your couch or armchair (wow!) Modular : attach a cupholder, tray, or even a gridfinity base Simple :…
No supports or brim required. A foldable couch armrest tray designed to create a flatter and more stable surface on top of a sofa or chair armrest. The tray is made from multiple connected long segments, allowing it to flex around the…
This cup holder is designed to wedge between couch cushions and hold large mugs as well as multiple cell phones.
A traditional couch for a doll house or architectural model. It's 14.5cm wide, but resize to a suitable scale for your needs. Print with fuzzy skin for best results. See also the armchair and the loveseat.
Made this cupholder to fit snugly on one of the sides of my Lovesac Sactional couch. It has a large cupholder that can accommodate a large range of cups and bottles, as well as slots for mugs with handles. The fit around drinks isn't very…
Keep knocking your drink/coffee over while chilling or falling asleep on the couch? This coaster with tip proof technology may be for you... 26 Nov 2024 - Update Added couch coaster to fit a stanley thermos mug.
This is a holder for up to 3 remote controls & can be hooked over the arm of a chair or couch. I designed it for a square-top arm of 6.5 inch (165mm) width. It prints in 4 pieces: the arm hook, remote pocket, & 2 retaining pins. I use it…
Two brackets designed to keep an L-shaped segmented couch together. The two pieces of my couch had a tendency to drift apart from each other, often while you were laying in it causing you to fall onto the floor. The straight bracket is…
Need another bracket for your couch? Want to make a giant bed, ball pit, or just lost your other brackets? Look no further! This is a U bracket model that serves as the universal joiner for all modular couch components. This model is…
Low Poly Sofa Couch 3D Model
Deutsch: Halter für Tassen, Gläser und Flaschen auf der Sofearmlehne. innenmass vom Halter 180mm, meine Armlehne ist ca. 200mm breit so klemmt der Halter gut und wackelt nicht. in der mitte ist ein D100m Kreis 3mm tief für IKEA…
The final ground clearance will be around 5 inches after felt pad installation. These legs are designed to accomadate 5/16" or M8 bolts for the fixation wich is pretty typical for these type of square legs. Use flat washers with the…
Improved chamfers for the bolts in the style of Mr. Mestro on YouTube (for flawless threads).
Couch arm remote holder made for IKEA ANGERSBY Features: Light Minimalist design Installation: Slide into the couch armrest Insert remote … Profit ? Beware Compatible with 80mm armrest sofas/chairs. Remote hole 50x21mm Print settings:…
Couch Organizer Couch organizer with space for a drinking glass, a mug, 1-2 remotes and snacks/other items. Print Settings Prints without supports 15% infill 0.2 Layer Height (Lowering the layer height may increase the surface quality)…
I printed the parts separately without supports. I have not tried the one piece model, but it might need supports.
Wireless charging dock compatible with Lovesac sactional couch Compatible with round wireless charging pucks with a diameter of 98mm or less and a thickness of 10.5mm. You can get a wireless charger with a thickness of up to 14mm if you…
I needed to adapt the cupholder on my couch so I can place cups that were larger than the cupholder could hold. This provides a platform that can hold those larger cups. I have included a fusion360 file giving you the ability to change as…
This is a table and cup holder that fits the Ikea Friheten sectional couch and sleeper perfectly. I made this to hold my plates and drinks while sitting on the couch. Printed for some friends and they also loved using it so thought I…
Easy to print sectional couch comprising two parts…corner section and straight couch. You may want to print two sets, or maybe two corners.
I wanted a better surface to use my mouse on when I'm sitting on my recliner, so I designed this mouse pad with flexible wings that help keep it on the couch arm. It's a multimaterial print, but doesn't require a tool changer. If you have…
Is your sofa sagging? It might be because of the springs of the sofa are loose. Or more precisely the clips that hold the springs are broken. Remove the old broken spring clip and screw this in its place. After the clip is firmly…
Depending on your couch armrest geometry, you may need to scale accordingly. Tray top measures 24.5 cm across and 20 cm deep. You can always print a thin cross-section to test fitment before committing to full print. Print on its side for…
Couch Cup Holder designed for ikea Vimle
My Wife and I have limited space in the storage section of our couch. I decided to create a solution. I measured the items that we usually have by up on the couch and created the bins in the tray accordingly. I have included STEP versions…
couch armrest table with slots for phone, remote and drink, blending functionality and modern design
I printed with 3 walls and 15% honeycomb infill (infill combination turned on) with .1mm layers for aesthetics in ASA. Print vertically.
This 1/12 scale couch base is designed to be used with foam cushions. Easy to print no support, requires one metal paperclip cut into 8x 8mm shafts to assemble. Included base options for 120m wide or 60m wide cushions (you can resize…
Description Keep your remotes neatly organized and within easy reach with this clever holder, designed to fit securely between your couch’s armrest and cushion gap. No drilling or tools needed — just slide it in place for instant,…
Damit mein Saugroboter unter die Couch kommt musste ich sie höher legen. Unten findet Ihr das YouTube Video dazu. Drucker: DeltiQ2plus TRILAB Düse: 0,4 mm Layerstärke: 0,2 mm Filament: smartmaterials3D YouTube Video: Making of Sofa höher…
Behold this plump, contented porker as he lounges through life with zero hurry and maximum snorts of delight. Decked out in all his rotund glory, Sir Oink-a-Lot is the perfect embodiment of “treat yo’ self” Sir Oink-a-Lot guarantees belly…
Simple and functional, everything you need to never lose your remote controls anymore.
Side table that fits onto the armrest of a couch or sofa with remote control slot and a small rim to secure the content.
If you want to keep your well-deserved "Feierabend-Bier" or any other drink of your choice within easy reach while relaxing on the couch - without ruining the upholstery - this print is for you! Made from a reused Prusament spool (which,…
I created this spacer to keep my couch from sliding and pressing against an outlet located behind it. Fusion 360 file attached for customization. Mirror the model in your slicing software for left/right versions.
Classic Little People Couch. Fits 2 of the old style Fisher Price Little People figures. No Supports Needed. Any PLA should work.